How to make a process task to return a variable and a response code?

Hello IDMers,
I have written a ldap look up code to fetch the manager dn from Active Directory. I want to return a success Response code from this task completion. But I dont know how to do both at the same time, becuause my code returns Manager's DN name from AD and I also want a response code from this Task say- Success, so that based on that I can do something else??
Please help me with this.
Thanks.
VSN

You can return either of them individually but not more then 1 values at any time. Use the following approach:
- Use the Manager's DN name wherever you want it in between the code and when the whole process succeeds then return a SUCCESS response code. Call next task as required.
Thanks
Sunny

Similar Messages

How to trigger a process task on IT Resource process form

Hi,
I want to know how to trigger a process task on IT resource process form using OIM API.For Example:- If a task ilike an e-mail is to be sent on the departure date of a user.So,how can it be done using API?
Thanks.

This would typically be done through a scheduled task. Write your code to query for the departure date. If someone meets your criteria for an action to occur, you can either use the addProcessTaskInstance which has an adapter attached to it to send the email, or in your code, send the email.
The details that need to be considered though is where the departure date is stored. Is it on a process form, or is it on the user's OIM profile. Do you want to disable the user or revoke the object instance at this departure date? You could use the notification tab of these existing tasks if so.
-Kevin

How to make site root-relative links work in DW and Server both?

See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
      /images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a (existing format)
"new style" site root relative link
      /public_html/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: broken
      Ease of switching: easy
Document relative link
      ../../images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: good
      Ease of switching: hard (how to automate?)
Absolute link
      http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"

Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative?

How to make a selection of a layer delete content and paste another content with Photoshop scripting..?

how to make a selection of a layer delete content and paste another content with Photoshop scripting..?

There is a more specific Forum …
Photoshop Scripting

How to make dyn/admin not to prompt for username and password?

Hello all
How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
Your inputs will help a lot.
Thanks,
Sundar

Hi,
You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
Gopi

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How to make a process form field non updatable in OIM 11G PS1

Hello all - I have a filed in process form, which once filled should be not be updated. Could you please let me know how to achieve this?
Should we create a process task, where in we can say 'updating this filed is not possible' ?
I tried this. But OIM shows the filed with updated value but 'Resource History' shows status as Rejected.
Please help. Thanks
Manju

The only way i would see this possible would be through an event handler if you can make it work for this form. On your pre-update, you would need to make sure to always return the original value back to the form so even if changed, it would change it back.
-Kevin

How to make a select list to return value to numeric column?

I do have a select list with static values (STATIC:01;0,02;1,03;2,04;3,05;4,06;5,07;6,08;7,09;8,10;9). The problem is that I am returning a value to a numeric column. Therefore I have set 'Post Calculation Computation' as "to_number(:P73_MRGRATING, 9);" however I am getting ORA-01722: invalid number. How, (or when and where) to properly convert a character from a select list representing a numeric value into column of NUMBER data type?
Thank you for your time.
DanieD

Sergio,
It is because I am not able convert a value in a page item (:P73_ID) to number. On a page before, I have assigned a value to an application item (APPL_ID). On page 73, I want to assign the value in APPL_ID to the page item P73_ID . The value assigned to APP_ID is numeric. On a page 73 I also have a computation in Page processing section. It is an 'After Submit' processing of a static assignment of application item APPL_ID to page item P73_ID. Unfortunately it does not work. (ORA-01722: invalid number). I have tested this also with a 'Post Calculation Computation' on page item P73_ID (to_number(:P73_ID, 9999999999);) and I am still getting ORA... error. Only way I can make it work is to create a page item P73_ID as a text field, then when I run page 73 and enter a value into P73_ID manually - then it works and I can save the values from the form into database...
The strange thing is that I am using application item APPL_ID on a couple of pages, in where clauses and it always works, even when I am comparing APPL_ID against a numeric value like select * from a_table where some_number = :APPL_ID, this works. But when I would like to create an entry form and assign application item APPL_ID to the page item P73_ID that is referencing a numeric table column â then I am getting ORA-01722â¦
Is there any application (sample application) that is doing this and it works so I can check it and learn how to create this process appropriately?
Thank you for your time.
DanielD

How to make the Convert task to exit if there is Rejected data

Hello,
I try to develop a DTSX package for SQL 2005, with BPC 7.0 SP6.
The package contains Convert step.
I want to exit package execution if during the Convert step there is at least one Rejected data
Problem: Convert task exists On Failure only if All data rows is rejected.
Do you know how I can make the Convert task exist with Failure if there is at least one row of Rejected data?
Or maybe there is some Expression I can check which contains the number of rejected data?
Thank you, Alex

Hi Alex,
Perhaps you can use a Transformation file, similar to the Import Data Package, to check the integrity of the data before the conversion.
Regards,
Jason

How to make BPEL process to be exposed via java binding?

How to make a BPEL process itself to be exposed via java binding?

You can using WSIF. There are a few doc on the internet that explain this here are a few to get you started.
http://www.oracle.com/technology/pub/articles/bpel_cookbook/juric.html
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/java.htm
cheers
James

How to get provisioning process tasks of a request with API

Hi All,
I need to know the number of process tasks called during a provisioning process for a resource object and also the status of each task!
Which API is availabe for this?
Does any one have a psuedocode?
Regards,
SK

http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/Thor/API/Operations/tcProvisioningOperationsIntf.html#getProcessDetail_long_
and
http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/Thor/API/Operations/tcProvisioningOperationsIntf.html#getProvisioningTaskDetails_long_
HTH,
Bikash

How to make the values of a combination graph (bar and line) visible always

Hi ,
I am using jdev 11.1.1.6
i have created a combination graph which has a bar and line.
The data with respect to bar and graph were only visible when i keep the mouse pointer on it.
i need to set the values visible always.
kindly let me know how to make it.
In pie graph its by default showing the data always.
regards
Siva

Hi Sameh Nassar,
Thanks for the input, am using the combination graph and i dont have this property added till now.
i tried adding them manually in source but it didn't work. so I assume that this property is good with pie chart alone.
please correct me if am wrong.
This is my combination graph structure.
    <dvt:comboGraph id="comboGraph1"
                      value="#{bindings.testVO1.graphModel}"
                      subType="COMBINATION_VERT_ABS_2Y" shortDesc="Graph 1">
        <dvt:background>
          <dvt:specialEffects/>
        </dvt:background>
        <dvt:graphPlotArea/>
        <dvt:seriesSet markerDisplayed="true">
          <dvt:series lineWidth="0"/>
        </dvt:seriesSet>
        <dvt:o1Axis/>
        <dvt:y1Axis/>
        <dvt:y2Axis/>
        <dvt:legendArea automaticPlacement="AP_NEVER"/>
        <dvt:graphTitle text="Combination graph"/>
        <dvt:o1Title text="x axis"/>
        <dvt:y1Title text="y1 axis"/>
         <dvt:y2Title text="y2 axis"/>
      </dvt:comboGraph>
regards
Siva

How to make a slide show or edition including mpeg and other formats

Hi,
I am i bit puzzled by the use of iphoto/imovie/itunes.
I have a Sony camera which generates jpg photos and mpg videos; besides, i have 3gp and mp4 videos from cell phones.
Firstly, i imported all of them to iphoto. I used a automator workflow to help importing from hotsynced Palm centro files, to discover the first problem with the 3gp files: they could not be iported by workflows.
Still, they could be seen in iphoto, but then i tried to make a slide show. My idea was to put the photos and videos of a certain event to be watched together, or at least to be able to watch the videos in a sequence, without having to click on each one.
I didnt get it in iphoto, so i switched to imovie. it was even worse, since it cannot import the mpgs and the 3gps (the jpg photos were ok). What could i do about that? is there any converter or other way?
then i tried the itunes, and it was the opposite: it imported and played in sequence the mpg videos, but not the photos. This is a workaround anyway, since the program expects to play movies, and makes my daughter a "star", but that`s ok, she is one to me.
i'll be thankful for hints on how to make the imovie compatible with the 3gp and mpgs, or finding some way to do this edition in iphoto or even with itunes.
regards

I see, it sounds reasonable , i think i will buy the pro and try.
QT Pro ($30) and MPEG Streamclip (free) complement each other. In many cases one can do things that the other cannot. For instance, MPEG Stramclip can handle/edit multiplexed formats while QT Pro cannot. QT Pro allows layering of data tracks while Streamclip does not. Streamclip merges file streams more easily than QT Pro but QT Pro allows the "Movie to MPEG-4" export to "passthrough" the video while Streamsclip does not. And so on and so forth...
I was referring to the mpegs from the Sony camera, of which a have hundreds, shot in the last 3 or 4 years, mainly from my 5-year old daughter. Is the above true to these?
That still doesn't help. By "sony camera," are you referring to a still digital camera (multiplexed MPEG-1) or a Sony video camcorder taking MPEG-4/AVCHD with AC3 audio in an MPEG wrapper, a Sony DVD/HDD camera storing some kind of MPEG-2/AC3 files. On a Mac, the extension MPG normally refers multiplexed MPEG-1 (or MPEG-1 audio layer) files while MPEG normally refers to multiplexed MPEG-2 video content with MPEG-1, layer 2 audio (MPEG2/MP2) but may also refer to files with MP3 or AC3 files in an MPEG, VOB, or TS wrapper. In addition it may loosely refer to elementary M2V video streams (M2V video file paired with a separate AIFF or AC3 file), a standard MPEG4/AAC file (in an MOV or MP4 wrapper) or a standard H.264/AAC file in MOV, MP4, or M4V wrapper). Since the handling, conversion, editing requirements vary with each type of file, it becomes important to what specific kind of content/file container we are dealing with here.

How to make iBooks available in iBookstore for Sri Lanka and India?

Does anyone know how to make iBooks available for purchase in iBookstore for Sri Lanka and India? I have tried going through iTunes Connect to add regions, but it doesn't give me the option to add any more. Thanks

ali.basheer.ahamed wrote:
Can I know How to add to the Indian store please. I have been trying the same - unable to add.
Consult this list to see whether paid books are available in those countries:
http://support.apple.com/kb/TS3599
If not, you have to use another store, like Kindle, Nook, Kobo, Googlebooks, or Sony.

My forwart text feature on IOS 8 keeps disappearing and the only way I know how to make it re-appear is by powering off and on my phone, is there another way to fix this feature?

my forward text message feature on IOS8 keeps disappearing and the only way I know to make it re-appear is by powering off and on my phone. Is there any other way to fix this?

I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
What's the secret?

How to make a process task to return a variable and a response code?

Similar Messages

Maybe you are looking for