How to make the values of a combination graph (bar and line) visible always

Hi ,
I am using jdev 11.1.1.6
i have created a combination graph which has a bar and line.
The data with respect to bar and graph were only visible when i keep the mouse pointer on it.
i need to set the values visible always.
kindly let me know how to make it.
In pie graph its by default showing the data always.
regards
Siva

Hi Sameh Nassar,
Thanks for the input, am using the combination graph and i dont have this property added till now.
i tried adding them manually in source but it didn't work. so I assume that this property is good with pie chart alone.
please correct me if am wrong.
This is my combination graph structure.
    <dvt:comboGraph id="comboGraph1"
                      value="#{bindings.testVO1.graphModel}"
                      subType="COMBINATION_VERT_ABS_2Y" shortDesc="Graph 1">
        <dvt:background>
          <dvt:specialEffects/>
        </dvt:background>
        <dvt:graphPlotArea/>
        <dvt:seriesSet markerDisplayed="true">
          <dvt:series lineWidth="0"/>
        </dvt:seriesSet>
        <dvt:o1Axis/>
        <dvt:y1Axis/>
        <dvt:y2Axis/>
        <dvt:legendArea automaticPlacement="AP_NEVER"/>
        <dvt:graphTitle text="Combination graph"/>
        <dvt:o1Title text="x axis"/>
        <dvt:y1Title text="y1 axis"/>
         <dvt:y2Title text="y2 axis"/>
      </dvt:comboGraph>
regards
Siva

Similar Messages

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Combination stacked bar and line chart

Post Author: jl07
CA Forum: WebIntelligence Reporting
Is there a way to create a combination stacked bar and line chart in Web Intelligence XI R2 reports?
This can be done in Excel and I'm thinking that it should be possible in WebI reports too.
Thanks

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
JL07:
This capability is not currently available in WebI (though it is available in Crystal). Last fall I submitted this as an enhancement request. It is being tracked under the following enhancement request: ADAPT00676609 u2013 for the stacked bar chart, line graph issue.

Combination of bar and line in chart(graph) of Crystal Report XI

Hi,
I found the way to combine line and bar in a chart(graph) but I am getting rectangle marker where bar and line are crossed. Our user asked to remove the rectangle marker. Please let me know how to remove the rectangle marker.
Thanks and Regards,
Manjunath N. Jogin

Hi Senthil,
You are right but I am getting marker rectangle where line and bar coincides.
I want to remove the marker.
User asked following two things:
1. Marker like star, triangle, rectangle ...not required where coincide line and bar.
2. Line should be coincided (marker place) at middle of bar.
Please let me know how to achieve these two things.
Thanks,
Manjunath N. Jogin

How to make the value axis (Y) on the right?

the value axis(Y) of the stacked column chart is on the left default. how to make it on the right?
thanks.

e,
Numbers Charts do not have the option to move the value axis to the right side. You can turn off the display of Value Labels, using the Chart Inspector, and make your own value labels from a text box or small table column and place them to the right of the chart.
Regards,
Jerry

How to make the labels vertical in a horizonal bar chart?

Hi,
I am using CF 9. I have a horizontal bar chart. How can I make the labels on the Y-Axis display horizontally. Right now they are vertical and sort of sideways.
Below is a snipept from my <cfchart>. Everything is working, I just want the labels to display horizontally. How can I do this?
<cfchart
                          format="png"
                          chartheight="310" chartwidth="530" foregroundcolor="##000000"
                          show3d="false"
                          scalefrom="0" scaleto="14"
                          showlegend="no"
                          showxgridlines="yes"
                          showygridlines="no"
                          showborder="no"
                          style="#elementStyle#" >
                          <cfchartseries type="horizontalbar" paintstyle="shade"">
                          </cfchartseries>
</cfchart>
Thanks...

When you open the default New Tab page - about:newtab - which has the Tiles and a Search Bar, the "focus" is in the Search Bar. You could change a hidden setting to have a blank page when you open a new tab if that's what you want - that will have the "focus" in the Location Bar . URL Bar.
Type '''about:config''' in the URL bar and hit Enter.
''Accept the warning''
Search field at the top to filter with this - '''browser.newtab.url'''
Right-click the preference that appears below, and select '''Modify'''.
Insert '''about:blank''' for the new string value.

How to make the text fields as mandatory (in 'notes and attachment' tab)?

Hi,
We have defined some Fixed Values for texts under IMG>SRM>SRM Server>Cross Application Basic Settings>Text Schema>Define Fixed Values for Texts, for a certain transaction type of RFx responses for a text schema.
Because of this, the bidder can choose one of these fixed values for texts. This is perfectly working fine.
Now the question is, we want to make the texts fields as mandatory. i.e. The bidder should not be able to submit the responses if certain texts are blank.
Is there be any BadI for this?
GH

You can use BBP_DOC_CHECK_Badi for this field validation using a filter value RFx/Bid (I ont remember exact word).
Regards,
Jagadish.

How to make the finder window expand to full height AND width of my screen, but not "full screen mode".

The new green button on the finder window makes the screen go into full screen takeover mode - alt clicking this makes it 100% height of the screen.
How can I make this 100% width and height (just like it used to be in Mavericks)?
I have 2 x 27" monitors, so the "full screen takeover" mode is not right as I only want the finder window to be on one monitor whilst I work on another.
Any ideas?! Thank you!

Was about to post the same question.
Ever since I upgraded to Yosemite (about a month ago), this odd behavior has irked me.
Could it be that it only plagues those of us running dual displays? And therefore nobody else cares?

How to find the Values of SAP Gateway Server Host and Gateway Service Valu

Hi All,
I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
Can any one plz suggest me how to find these values.
Regds
Phanikumar

Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
Have a nice week end, Luciano.

How to make the knob of a horizontal Scroll Bar stay at right

Hi I need some advise to achieve this:
I have a chart continuously deploying towards the right side (think on an electro cardiogram that is continuously feeding data). All the chart information is kept available inside a JScrollPane. What I want to achieve is:
1. if the horizontal scroll bar knob is at the right end of the scroll bar make the end part of the chart be displayed continuously (view is scrolling to the right, the knob stays at the right end)
2. if the user moves the knob left from the right end freeze the motion and just show the selected portion (meanwhile data keeps being fed and stored but not displayed)
3. when the user decides to drag the knob again to the right end the behavior of point # 1 resumes.
The basic swing structure I'm using for this is the following:
public class Electro extends JPanel {
public Electro() {
JFrame f = new JFrame();
JScrollPane sp = new JScrollPane(this);
f.getContentPane().add(sp);
f.pack();
f.setVisible(true);
I would highly appreciate any feedback from fellow members. Thank you.

hi friend
try this in ur code
public class Electro extends JPanel {
public Electro() {
JFrame f = new JFrame();
JScrollPane sp = new JScrollPane(this);
sp.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
sp.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
f.getContentPane().add(sp);
f.pack();
f.setVisible(true);
i think it will be help full to you
thanks
waiting for reply

Can anyone tell me how to increase the text size in my menu bar and drop down menus?

Just bought a new 27" screen iMac. The menu bar and drop down menu text is much to small for me to see without leaning close to the screen. Does anyone know how to customize the text to a larger size. This is an issue for any program I open.

Once upon a time Apple displays packed in 72 dots to an inch (making their resolution 72 DPI). That meant that what we saw on screen at 100% scale was exactly what was printed on a printer - not to mention quite comfortable to read. However that advantage was eclipsed by the fact that photopgraphs and video were pixelated and the only solution to that was to increase the resolution - to pack in more dots per inch - which has the side effect of shrinking the size of text. Where I once used Word at 100% scale I now find it most comfortable at 150% scale.
There are several solutions. One, as Lex gave you, was to reduce the resolution of the LCD display. But unlike CRT displays, an LCD is tuned to a specific resolution and when you change it the results tend to be blurry. Another is to keep the resolution as it is and to adjust each program (if the program allows it). This makes Word usable and your browser can be set to use no font smaller than a size you set (which has some unpleasant side affects at some Web sites), but some programs and some parts of programs cannot be changed. The menubar and menus are among them. The third solution is one that Apple promised several years ago but has not yet provided - a resolution independant GUI. We can only hope that comes soon. And there's another partial solution - look in System Preferences under Accessibility.

How to compare the value of a cell before changing and after changing.

Hey there,
Now I want to implement a JTable. And the requirement is that users can edit a cell in the Table only once. I think there are two possible ways. One is that after user edited a cell, I will set this cell read only. Another way is to compare the vaule before and after the changing. If it is different, then write back the previous value.
But I did not know how to implement in Java. Can anybody help me?
Thanks alot!
Shelly

inevitably, you will have to save a before copy of
the data, what this many times amounts to is that you
will need to have 2 identical data structures before
you start or some type of locking mechanism for each
piece of data.Why is this inevitable? I don't see it as inevitable at all. In fact, it's quite simple to implement a TableModel that returns false when isEditable(int, int) is invoked for any cell that has already had setValueAt(Object, int, int) inovked on it, for example. Depending on the requirements and implementation a different methodology may be needed for determining when the edit has taken place, such as a custom editor that notifies the TableModel when stopCellEditing() is invoked. Heck, overriding editingStopped() in JTable to do it might even work.
So, create a TableModel that returns isEditabe(int, int) as true only if the cell hasn't been edited yet. The only problem to solve from there is how you know when it's been edited. I've already given you a few leads on that, it's not particularly hard but depending on your exact implementation it may require different solutions.

Cfchart yaxis scale is wrong when combining bar and line charts

Hi, I am trying to combine a bar and line chart ti display data. Everything looks good except that the yaxis scale is off. I set the scaleMin to 0 but that doesn't help. Below is my code, the custom XML style and a screen shot. My ultimate goal is to get the yaxis to start at 0, not -1,000 as is currently the case. I have combined this data with each set represented as bar charts and do not have this problem. It must be the combo of bar and line charts together. Any assistance is most appreciated.
<cfchart title = "#variables.ReportName# Seedlings Ordered"
    style = "../SO_R_overall.xml"
    Format = "PNG"
    pieSliceStyle = "solid"
    show3D = "no"
    showBorder = "yes"
    showLegend = "yes"
    tipStyle = "MouseOver"
    chartHeight = "#DefinedChartHeight#"
     chartWidth = "#DefinedChartWidth#"
    font="arial"
    fontsize="12"
    fontBold="yes"
    scaleFrom="0">
    <cfchartseries
        type="bar"
        seriesLabel="Goal"
        query="getDivisionGoalsByDivision"
        valueColumn="divisiongoal"
        itemColumn = "division"
        dataLabelStyle="Value"
        seriesColor="99CCFF"
        >
    </cfchartseries>
    <cfchartseries
        type="line"
        seriesLabel="Ordered"
        query="getQTYordered"
        valueColumn="QTYordered"
        itemColumn = "division"
        dataLabelStyle="Value"
        seriesColor="green"
        >
    </cfchartseries>
</cfchart>
***************** Custom Chart Style called *****************
<?xml version="1.0" encoding="UTF-8"?>
<frameChart is3D="false">
        <frame xDepth="3" yDepth="3" outline="#333333" lightColor="white"
        leftAxisPlacement="Front" rightAxisPlacement="Front" stripColor="#CCCCCC"/>
        <xAxis scaleMin="0">
            <labelStyle isHideOverlapped="false" orientation="Horizontal"/>
            <titleStyle font="Arial-10-bold" isMultiline="true">Division</titleStyle>
        </xAxis>
        <yAxis scaleMin="0">
            <titleStyle font="Arial-10-bold"/>
            <dateTimeStyle majorUnit="Year" minorUnit="Month"/>
            <labelFormat style="Pattern" pattern="#,##0"/>
        </yAxis>
        <dataLabels font="Arial-10" foreground="black" autoControl="true"/>
        <legend>
               <![CDATA[ $(rowLabel) ]]>
          </legend>
        <decoration style="RoundShadow"/>
        <popup background="#C8FFFFFF" foreground="#333333"/>
        <paint paint="Plain"/>
        <insets left="5" top="5" right="5" bottom="5"/>
</frameChart>

I should have also said that I am using 8.0 Pro.
I want to have the output similar to an e-book.
The issue (Sept-October of 19xx)
Then the individual pages (bookmarked)

How do i make the value increase by one at a time?

Hello guys,i'm really new to Adobe Flash,i just started a few days ago and im making a minigame and i want to know how to make a value to increase by one at a time,what do i mean?
For example if my Start Value is 20,then go to 21,then 22 and so on
Thanks in advance

So as Gnast said you have to increase de variable with the value of the speed increment.
I give you a code sample that increment a dummy control speed handler that checks the value every frame.. You can edit you current conditionals that make the speed changue.
var speed: int = (speed) ? speed : 1;
function increase_speed(value: int = 0) {
speed += value;
trace("Now the speed is: " + speed);
function control_speed_hadler(e: Event) {
//some conditionals
if (this.currentFrame == 100) { //it's a loop
this.increase_speed(1);
this.addEventListener(Event.ENTER_FRAME, this.control_speed_hadler);
I hope it help you

How to make the same value be placed in many variables.

Hi all!
I need help to make the values broght from ekpo-peinh: 1 2 3 4 5 etc... get placed into many fields of internal table, for example:
data: begin of it_size occurs 0.
        t90 like ekpo-peinh,
        t10 like ekpo-peinh,
        t11 like ekpo-peinh,
        t12.....
      end of it_size.
And I need to make that all the values from ekpo-peinh be placed in order in it_size-t90 = 1, it_size-t10 = 2, it_size-t11 = 3, it_size-t12 = 4 and so on.
So please if anyone can help me 'cause I don't know how to do that, I'll really appreciate it.
Thanks for your time.

Hi Guillermo.
I'm not sure i understand completely, but here's part of a solution:
data: l_comp type i,
      l_type.
field-symbols: <f> type any.
describe field it_size type l_type components l_comp.
do l_comp times.
assign component l_comp of structure it_size to <f>.
if sy-subrc ne 0.
    exit.
endif.
move (value from EKPO) to <f>.
enddo.
This will populate, in order, your IT_SIZE structure with a value (EKPO-PEINH). I'm not sure how this value is managed, but this should give you an idea.
Regards,
Jesse Thibodeau

How to make the values of a combination graph (bar and line) visible always

Similar Messages

Maybe you are looking for