How to make a single recording into multiple songs garageband

I recorded my band's gig the other night using my Zoom H2 recorder. I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks. I would like to use garageband so i can edit out the deadtime between songs but I don't know how to make a CD.

johndmalone wrote:
I want to take the single 1.5 hour recording (12songs) and make it into a CD with 12 individual tracks
http://www.bulletsandbones.com/GB/GBFAQ.html#chaptertocdtracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Splitting the single record into multiple records based on validity

Hi Guru's,
basically i am an BI consultant with less knowledge on ABAP, can i request your help on the ABAP task.
I am working on HR module which is integrated with SAP BI, the reports will be executed based on calendar month the requirement is i should split the single record into a multiple records based on validity of the record. basically the HR data would be in data from and date to.
below is the logic
Check whether the start and end date of the record are in the same month and year.
If yes  nothing changes
If no  create multiple records
1st record  original start date of the record u2018till end of that month
Following record  1st of the next month u2018till last day of the month
u2026
Last record  1st of the month u2018till original end date.
All fields will have the same values, only the datefrom and dateto fields change.
Can any one please provide me the same code to proceed on my task.
Thanks and Regards,
Venkat

Hi,
Using Rule group we can split it.
Using Rule Group in SAP-BI Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20rule%20group%20in%20sap-bi%20%20part%20-%201.pdf
Thanks
Reddy

Transformation Routine to convert single record into multiple

All,
I need your help with ABAP Syntax. My requirement is to take a single record and convert it to multiple records into a DSO with a condition to not create a record if a KF value is 0.
R/3 Data Record:
Employee | Date | Char1 | KF1 | Char2 | KF2 | Char3 | KF3 | Char4 | KF4
Conversion Result into DSO:
Employee | Date | Char1 | KF1
Employee | Date | Char2 | KF2
Employee | Date | Char3 | KF3
Employee | Date | Char4 | KF4 (This record will not be written if no value is in KF4)
I have read about the result table in update rules, however within BI 7.0 Transformations I am unfamiliar as to where the RESULT_TABLE function applies. Has this been replaced by the Expert Routine?
Could any ABAP expert provide sample code as to how I would perform this conversion in a Transformation Routine?
Thanks,
David

Thanks Alex for your response.
I did find a solution to this as it turns out to be fairly simple, however I executed the routine as an Expert Routine instead of a Start Routine. I was advised to do the transformation here.
The basic concept is defined below:
Loop at source_package assigning -kf2.
Append result_fields to result_package.
Endif.
-- Kf3u2026 and so on
Endloop.
Basically the APPEND statement is used to create the additional records.

How to make a single record datablock?

Hi all,
I got a data-entry form (9i) that will input a record one at a time and commit before entering another record.
I try to set the block as single-record to yes but it gives error, and after checking with help, I understand that it can not work with database data block.
Is there any idea on how to make the data block to show only one record? The problem is that after entering some data on the record, sometime the data-entry clerk may push the arrow-key that make form shows the next record items, which will be empty, and this will confuse the clerk!
Thank you for your help.

Add Triggers KEY-UP(DOWN, NXTREC, PRVREC...) to the following effect:
NULL;
or
NEXT (PREVIOUS) _ITEM;

How to make a single image with multiple clickable points?

Hi,
I just started using CS4 yesterday, but am pretty confused. I managed my first little achievement with it, but am havign troubles. I'm not even sure of the capabilities of the software to be honest, but I would like to know if I can have a single image, then have sections of it which can be hovered over with a tag and a link to another part of my site. Is this something that can be done?
Thanks!

Hi,
to reach several different links on the image you need to create so-called hotspot (I had to translate the following terms from my German Dreamweaver). How to do?
Click into the image
Open properties window
Open list box orientation.
Surround the image parts in question (look at the green arrow). Feel free/play with chosen forms.
Hans-G.
P.S.
You shouldn't use only images on your site.

Splitting the single record into multiple:One-to-Many;S'ingLikeRESULT_TABLE

Hello Friends,
        I am an ABAPer and new to BW. we have a requirement as follows.
BW is getting data from R/3 system. all the purchasing, sales data and billin data.
at the BW end for each Material document we get multiple ITEMS. ( items will be retrieved at BW end)
the question is how to get the multiple entries in the result.
Each material will have one or more items. so we want to write a separate record for each item. Can we do it using RESULT_TABLE?
I have no idea how the data process at BW end.
I have been trying to find the info in SDN but could get what exactly they are saying. bit confused with key figures and so.
Can anyone of you give some idea on how to get this done please ?
Thanks a lot for your help..
Regards,
reddy
Edited by: SAP User on May 19, 2008 4:27 PM

Ramesh,
   Thank you for the resp.
    Could you please tell me which table actually holds the data that is coming from R3 system?
at the moment I am trying to get the item data from a select statement for a particular master data (which is coming from COMM structure). then i am updatting the return table. but only the last value is getting updated in the final output.
Could you please give me some idea on how to do this? Thanks
Regards,
Sree

How do you insert new records into multiple tables using the same unique primary key?

I’ve created a PHP site and MySQL server using a free app called XAMPP. I have successfully created a form in Dreamweaver that will write data to a (name) table in the SQL database. Here’s my question: How do you write to two (or more) tables in the same database and pass the same primary key to both tables? In the SQL database, I defined the first field as ID and set it as the primary key with auto update. So, when you insert a new record, it creates a unique primary key for that record. In my form, I’m capturing info that needs to be stored to two tables at the same time; a Name table and Address table. Since the Name and Address tables use the ID field as the primary key, I believe I will need to pass the ID value from the Name table to the insert of the Address table to insure they both have the same primary key, right?

No. You probably need the primary key from one table to be a foreign key in the other tables. In any case, I believe you can use two methods to obtain the auto generated key. First with SQL:
http://dev.mysql.com/doc/refman/5.0/en/getting-unique-id.html
And the other using a PHP function:
http://us3.php.net/mysql_insert_id

How to convert columns of record into multiple rows

Hi,
I have the following data:
Col1 Col2 Col3
Dat1 Dat2 Dat3
I would like to convert the above data into:
Col1
Dat1
Dat2
Dat3
How can I achieve this beside using UNION?
Appreciate advise urgently.
Thanks and Regards,
Shiau Chin

Sorry, I misread your reqs. Is this what you are looking for:
with t as (
           select 'Row1Dat1' col1,'Row1Dat2' col2,'Row1Dat3' col3,'Row1Dat4' col4 from dual union all
           select 'Row2Dat1' col1,'Row2Dat2' col2,'Row2Dat3' col3,'Row2Dat4' col4 from dual
select col4 col1,
        case lvl
          when 1 then col1
          when 2 then col2
          when 3 then col3
          else col4
        end col2
from t,
        (select level lvl from dual connect by level <= 3)
COL1     COL2
Row1Dat4 Row1Dat1
Row2Dat4 Row2Dat1
Row1Dat4 Row1Dat2
Row2Dat4 Row2Dat2
Row1Dat4 Row1Dat3
Row2Dat4 Row2Dat3
6 rows selected.
SQL> SY.

How to import a single schema into multiple target schema?

Hi,
I want to import a schema named sd from my source database to my target database in schema sd1 and sd2.
I have tried using the following impdp parameter which is throwing error :-
impdp system/system schemas=sd remap_schema=sd:sd1,sd:sd2 directory=backup dumpfile=8.12.13.dmp logfile=8.12.13.log
Please help me.

If you look up the syntax in the docs, you will see that while you can remap many schemas into one, you cannot remap one schema into many.

Split and reformat single record into multiple records

Hi ,
I need to split 1 record in to 2 records with 1 new field(event)
I have one internal table in this format
No country stdate          enddate
1    us        12/01/2006 10/07/2007
i need to reformat this record like ;
NO country event    pldate           acdate
1     us          ga      12/01/2006   12/01/2006
1     us          es      10/07/2007   10/07/2007
Can any one resolve this issue?

Check the example.
report zrich_0001 .
data: begin of itab occurs 0,
      no type i,
      country(3) type c,
      stdate type sy-datum,
      enddate type sy-datum,
      end of itab.
data: begin of itab2 occurs 0,
      no type i,
      country(3) type c,
      event(2) type c,
      stdate type sy-datum,
      enddate type sy-datum,
      end of itab2.
itab-no = 1.
itab-country = 'US'.
itab-stdate = '20061201'.
itab-enddate = '20071007'.
append itab.
loop at itab.
clear itab2.
move-corresponding itab to itab2.
itab2-event = 'GA'.
itab2-enddate = itab-stdate.
append itab2.
clear itab2.
move-corresponding itab to itab2.
itab2-event = 'ES'.
itab2-stdate = itab-enddate.
append itab2.
endloop.
loop at itab2.
write:/ itab2-no, itab2-country, itab2-event,
          itab2-stdate, itab2-enddate.
endloop.
Regards,
Rich Heilman

How to devide a single task into multiple tasks in OSM 6.3 ?

Hi all,
i am using OSM 6.3 and trying to devide one task in to multiple tasks, such that the subtasks can be shown in a combo box ?
basically the requirement -->
There is a order and the order can have many services which are independent of each other. So i want to show the different services to user, which they can select and accordingly the reqired data elements will be visible in webclient.
i am new to this domain so may not be able correct in wordings.
thanks in advance.
regards,
Rosaa

Hi,
if you are using >= TS2010 there is support of 64Bit integers (int64 and uint64).
with it you are able to store your 6 bytes.
I am using it for saving MAC-Address.
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

How to cut a single track into seperate songs

I am very new to Garage band and home recording in general. I recorded my band practice and want to pick the best songs into separate tracks to make a cd for everyone to practice with. I just used the computer mic and recorded a 2 hour practice as one track. Any help would be much appreciated!

skim down through the tute on recording LPs, you'll see how to do it:
http://www.bulletsandbones.com/GB/Tutorials.html#allabouttransferringlps

Displaying single value (Record) into multiple columns

Hi All,
I want to display the single record into multiple columns. Please let me know How to achieve this..
Record:
Lvl Activity Acre
6 Week 4 (Same value to be displayed into 3 columns.)
REquired output:
lvl Activity PH1 PH2 PH3
6 Week 4 4 4
Thanks
Kavi

user533671 wrote:
Hi,
Thanks for immediate reply.
PH1, PH2, PH3, ... will go more columns based on parameter , what we are passing.An single SQL statement cannot have a dynamic number of columns based on the data itself. The projection (columns returned) have to be known before any data is fetched... and that includes some 'parameter' value.
{thread:id=2309172}
You can build a query dynamically, based on a parameter or even on the data, but 99 times out 100 people use dynamic queries where they are not needed.
Perhaps explain to us what you are really trying to achieve and why, and we could suggest some better way.

How to retrive one table records into another table by multiple records

how to retrive table X records into another table Y by multiple records (means at once i want display 10 records) in form 6i .
when i am written cursor it is ftching only one record.But i want to display all records at once.
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae WHERE PROTOCOL_NO='KP229';
Begin
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;

Hi,
Make sure the cursor is in the detailed block. For that use 8GO_BLOCK* built-in. So the code will be
Declare
Cursor cur_name is
select PROTOCOL_NO,DOCNUM,SUBSETSN,REPEATSN,AESEQ,AETERM from coding_ae;
Begin
GO_BLOCK('<detailed_block_name>');
open cur_name;
loop
fetch cur_name into :PROTOCOL_NO,:DOCNUM,:SUBSETSN,:REPEATSN,:AESEQ,:AETERM;
exit when cur_name%notfound;
next_record;
end loop;
close cur_name;
End;Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

How to make a single recording into multiple songs garageband

Similar Messages

Maybe you are looking for