How to make a SPILT in ABAP so that the data to write in same field ?

Hello gurus,
In BW I have a field (ZWELS) that writes the data CSA and every letter is a Key. I need this letters to be each letter on a row. I know there is a SPLIT statement but I don`t know how to put it in the same field.
SPLIT SOURCE_FIELDS-ZWELS AT firts letter? INTO the same field?
Best regards,
Ramona
Edited by: Ramona Selmer on Dec 13, 2010 10:09 AM

Hi Ramona,
If your string contains only 3 characters and you need to divide that string into 3 rows then you can use MOVE statement.
for ex:
data: str1 type char3 value 'ABC'.
move : str1+0(1) to first_char,
str1+1(1) to second_char,
str1+2(1) to third_char.
Here first_char contains 'A', second_char contains 'B' and third_char contains 'C'.
If your string does not contains fixed number of characters then as suggested by Sravan Kumar there should be some pattern to split the character and if the number of character is fixed then you can try the MOVE statement (as shown above).
Please let me know if you need any help.
Regards,
Darshana

Similar Messages

How to make html file on server side from the data entered in text area

Hi!
I want to know how to make .html file on server side. Like if i enter the data in text area ( or like we normaly see when we write mail that editor) and we can use html tages in it and when user submit form all the data in that field will be saved on server side as an html formate. Is it possible to do so??? or any ruff idea how to design it???

Erm ...
Whats the problem with that?!
Ok, here the code ...
String myparameter = request.getParameter("paramname");
String htmltemplate = "<html>\n"
                     +"<head><title>demo</title></head>\n";
                     +"<body>@parametertag@</body>\n";
                     +"<html>";
String htmlpage = htmltemplate.replaceAll("@parametertag@",myparameter);
File yourHTMLfile = new File("wheredoyouwannagotoday.html");
FileOutputStream fos = new FileOutputStream(yourHTMLfile);
fos.write(htmlpage.getBytes());
fos.close();You're done.
Happy Coding! :-) ©

How to make a redirect without auto-redirect from the portlet "edit" mode?

How to make a redirect without auto-redirect from the portlet "edit" mode?
I use some sofisticated customizing with server-side validation of the form data. I want to redirect to the page of the portlet "show" mode and to the "edit" mode depending on the validation results. How can I do it?

Heay.....this worked for me.
I am able to change the mode programatically from edit to show.
HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
Thanks
~Neeraj Sidhaye
Try_Catch_Finally @ Y !
ExtremePortal @ Gmail　Ｄｏｔ　Ｃｏｍ

I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks

I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks
just getting started so I would appreciate some assistance
Mike

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

How to make an ebook and sell it on the ibook or app store??

How to make an ebook and sell it on the ibook or app store??
Can anybody help me please T^T
By the way I'm in Thailand and want to sell my ebook around the world.
This is my dream ^^.. Help me please...

Hi,
Start with the ADC iOS dev center here.
http://developer.apple.com/devcenter/ios/index.action
Carolyn

Hi , How to make a calculated kf as local in the query definition

Hi ,
How to make a calculated kf as local in the query definition
Regards,
Ravi.

Hi,
Calculate KF consists of Basic, restrict and other calculated kFs stored in Metadata repository.
Calculate KF is a replicate of Formula and acts as Global.
Calculate KF acts as Global--you can use Globally.
Formula as Local--you can use as local to Query.
you can create the Calculate KF as follow:
Goto Query Designer>Open/Create Query>Select Key Figures Mode on left side of Query>Select that KF node> right click Select Calculate Keyfigure.
then one popup window dispays, so you make the calculations based on Basic KF, Restirct Kf and Formule. then save it.
Regards,
Suman.

How to make ENTER key in internet explorer run the BIP report?

In BI publisher 11g, users wanted that after entering the values for the parameter, they hit the ENTER key ( on the keyboard) and the report should run .
In Mozilla firefox, when I hit ENTER key on the keyboard report runs fine... but in Internet explorer, it does not ( infact in internet explorer TAB key works)
How to make ENTER key in internet explorer run the report?
Thanks
Ashish

Perform the following steps and tell us if it resolve this issue:
1. In Internet Explorer, click Tools, and then click Internet Options.
2. Click the Security tab.
3. There are four security zones listed:
* Internet
* Local intranet
* Trusted sites
* Restricted sites
Click the zone being used by P6, which is noted at the bottom right hand corner of the browser window when the P6 URL is being accessed.
4. Under Security level for this zone, click Custom Level.
5. Under Downloads, under Automatic prompting for file downloads, click Enable, and then click OK two times.
6. The browser will need to be restarted for the change to take effect.
Refer to the following Microsoft Knowledge base article for additional file download and active x controls which should also be enabled: http://support.microsoft.com/kb/883255

How to make more than one person can access the database at one time

how to make more than one person can access the database at one time

Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.

Hello, i would like to know how to make horizontal sites and it moves with the scroll

Hello, i would like to know how to make horizontal sites and it moves with the scroll

Hi
You can refer to these videos :
http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
https://www.youtube.com/watch?v=gZI_K1TXqOM
Thanks,
Sanjit

My phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is gone

my phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is not salvageable? thank you so much in advance for your help!

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then see Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

How do I completely crop a PDF so that the cropped data is removed and the file size is reduced?

How do I completely crop a PDF so that the cropped data is removed and the total file size is reduced?
When I use the "Crop" function, the cropped data still remains in the file and there is no reduction in file size. I need a way to truly crop a PDF using Acrobat software.

When you export, try to get the full file path or else you will have to do a lot of manual searching.
If you downloaded the picture from Messages, the picture is stored in your User Library/Messages. to make your User Library visible, hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Messages/Attachments.
If you prefer to make your user library permanently visible, use the Terminal command found below.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

[Forum FAQ] How do I send an email to users when the data in the report have been changed in Reporting Services?

Introduction
There is a scenario that the data in the report changes infrequently, so the users want to be informed and get the most updated data once the data changes. By default, report server always run the report with the most recent data. Is there a way that we
can subscribe the report, so that we can send an email to users when the data in the report has been changed?
Solution
To achieve this requirement, we can create a subscription for the report, then create a trigger in the table which including the report data. When this table has data insert, update or delete, it will be triggered and execute the subscription to send email
to users.
In the Report Manager, create a subscription for the report and make it only execute one time.
When we create a subscription, a corresponding SQL Agent job will be created. Then we can use the query below to find out the job based on ScheduleId:
-- List all SSRS subscriptions
USE [ReportServer]; -- You may change the database name.
GO
SELECT USR.UserName AS SubscriptionOwner
      ,SUB.ModifiedDate
      ,SUB.[Description]
      ,SUB.EventType
      ,SUB.DeliveryExtension
      ,SUB.LastStatus
      ,SUB.LastRunTime
      ,SCH.NextRunTime
      ,SCH.Name AS ScheduleName
          ,RS.ScheduleId
      ,CAT.[Path] AS ReportPath
      ,CAT.[Description] AS ReportDescription
FROM dbo.Subscriptions AS SUB
     INNER JOIN dbo.Users AS USR
         ON SUB.OwnerID = USR.UserID
     INNER JOIN dbo.[Catalog] AS CAT
         ON SUB.Report_OID = CAT.ItemID
     INNER JOIN dbo.ReportSchedule AS RS
         ON SUB.Report_OID = RS.ReportID
            AND SUB.SubscriptionID = RS.SubscriptionID
     INNER JOIN dbo.Schedule AS SCH
         ON RS.ScheduleID = SCH.ScheduleID
ORDER BY USR.UserName
       ,SUB.ModifiedDate ;
Create a trigger in the table which including the report data.
CREATE TRIGGER reminder
ON test.dbo.users
AFTER INSERT, UPDATE, DELETE
AS
exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
Please note that the command ‘exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'’ is coming from the job properties. We can go to SQL Server Agent Jobs, right-click the corresponding job to open
the Steps, copy the step command, and then paste it to the query.
Then when the user table has data insert, update or delete, the trigger will be triggered and execute the subscription to send email to users.
References:
Subscriptions and Delivery (Reporting Services)
Internal Working of SSRS Subscriptions
SQL Server Agent
Applies to:
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is trying to backup data from the iPhone. I have done everything suggested in Apple support. How can I upgrade to iOS5 without losing all the data on my phone?

Everytime I try to update to iOS5 on my iPhone 4 I get an error containing 0xE while it is backing up data from the iPhone before installing the new operating system. I have done everything suggested in Apple support with no success. I still get the error everytime (about 5 minutes into backing up iPhone data). How can I upgrade to iOS5 without losing all the data on my iPhone (the error message says that if I continue I will lose all data on the phone)? If I have already synced the phone before upgrading the OS, would I be able to restore my data after installing the new OS by syncing after the OS upgrade is complete? Any help would be greatly appreciated.

I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
Before you restore or reset, I would try that first.

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

I backed up files onto an external hard rive form my old PC. Now I want to retrieve the files to put on my mac but it is telling me to format it to Mac. How can I do this without erasing all of the data on my hard drive?

Your drive was used with a PC and formatted NTFS which is proprietary Microsoft format.
You need to install a third party program that will read the NTFS format.
There is various software from PARAGON, Tuxera and NTFS-3G
When you get the data off and have verified it to be good, reformat the drive either HFS+ for Mac use only, or for Mac and PC use then MSDOS (FAT32) for under 4GB files (best) or exFAT (for larger than 4GB files) is proprietary and Microsoft is appling for a patent, which would likely mean OS X won't be allowed to read it anymore without a licensing fee and you'l have to pay another third party software company to read the format, just like NTFS is.
The less you have to rely upon third party sources to read your drives the better, this way if you have a issue and need to read the drive on another machine you don't need the software, and a internet connection and a credit card and...and...and...

How to make a SPILT in ABAP so that the data to write in same field ?

Similar Messages

Maybe you are looking for