How to make BMSEG structure in Flatfile?

Hi,
i want to make file into flatfile.i am using GUI_DOWNLOAD.but i have some problem.i want to change the BMSEG structure into flatfile.Can anybody help me on this issue.
Thanks & Regards

*& Report ZMM
REPORT ZMM.
DATA: BEGIN OF ZWEWA OCCURS 50.
        INCLUDE STRUCTURE BMSEG.
DATA: END OF ZWEWA.
SELECTION-SCREEN BEGIN OF BLOCK ONE WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FNAME LIKE FILENAME DEFAULT ' ' OBLIGATORY.
PARAMETERS : S_FNAME LIKE FILENAME DEFAULT ' ' OBLIGATORY.
PARAMETERS : MAXPO LIKE AM07M-MAXPO.
PARAMETERS : P_UNAME LIKE USR07-BNAME DEFAULT SY-UNAME.
SELECTION-SCREEN END OF BLOCK ONE.
==================================================================
                    START-OF-SELECTION                           *
==================================================================
START-OF-SELECTION .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    FILENAME                        = S_FNAME
    FILETYPE                        = 'DAT'
IMPORTING
<b>   FILELENGTH                      = 0</b>
TABLES
    DATA_TAB                        = ZWEWA
FIELDNAMES                      =
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER        = 3
   OTHERS                          = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM UP_LOAD.
*&      Form UP_LOAD
FORM UP_LOAD .
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME        = P_FName
      FILETYPE        = 'DAT'
    TABLES
      DATA_TAB        = ZWEWA
    EXCEPTIONS
      FILE_OPEN_ERROR = 1
      FILE_READ_ERROR = 2
      OTHERS          = 17.
IF SY-SUBRC <> 0.
*message e398 with 'Unable to upload data into xxx'.
ENDIF.
ENDFORM.                    " UP_LOAD

Similar Messages

How to make a structured set of folders in Automator

HI guys,
Hope you can help.
I'm after quite a unique folder structure - I want to be able to build automatically from scratch every week (to save me doing it by hand.
The structure should look like this (but probably a lot more):
computer.CFB.001.Dave/Originals/
computer.CFB.002.Chris/Originals/
computer.CFB.003.Ann/Originals/
computer.CFB.004.Paul/Originals/
So the main folder has two changeable things, the 001 and the name afterwards, the rest of the structure is constant.
At the moment, this is what I have (based on only 2 names):
new folder
new folder
Ask for Finder items (allow multiple entries, and directory chosen)
Rename Finder items (making sequential, using the numbers starting 001 etc)
Ask for Finder items (allow multiple entries, and directory chosen)
Rename Finder items (add text 'computer.CFB.' to beginning)
So if I run that, I can get all the folders to show up and it works BUT I get extra duplicated folders inside those folders - I'm not sure why this is happening?
Next step is that I need to individually add the names (chris, ann etc), so I want it add this to the end of the filename (but I would like a prompt so that I can write in each one - I don't see any other way around this apart from typing them in a prompt). If this can't be done, I'll just have to rename the folders by hand (but with over 100 people that could be hard work).
Then lastly, how can I add an 'Originals' folder into each of those folders?
Sorry for all the questions, this is all new for me. Any help would be great!

Open the Script Editor in the /Applications/AppleScript/ folder and run:
tell application "Finder"
set the_path to folder "test" of desktop
set A to ""
repeat with B from 1 to 1
if B < 100 then set A to "0" & B
if B < 10 then set A to "00" & B
set the_name to text returned of (display dialog "What name do you want for folder " & B & "?" default answer "")
set the_string to (((quoted form of POSIX path of (the_path as alias)) as string) & "computer.CFB." & A & "." & the_name & "/Originals/") as string
do shell script "mkdir -p " & the_string
end repeat
end tell
The path in the second line can be changed as needed. Use colons to specify different path elements.
(48710)

How to make structure of database Proprietary

Hello
I am really interested in how to obscure the structure of database and make it proprietary.
thanks

Hello,
most LR users only use one catalog, which fine in most cases.
Some professional photographers use one catalog per client (with one image folder per client).
I know, this is no answer to your question, but perhapst you rethink your decision to have muliple catalogs. (Or explain, why you need them).

How to make an icon image using Photoshop

I found out how to do this recently so I decided that I wanted to make a tut for those who don't know how to make an icon image. This icon image is for the libraries tab on your computer. Under the libararies tab there is Music, Pictures, Documents, and Photos
First you will need the ICO (Icon image format) Format extension for photoshop which can be downloaded here:
http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html
The download link and tutorial on how to install it is all in the link above.
Once you have that all set you can now launch photoshop to create your icon image. Once you have launched it, create a new document with the size as in the image below.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/256x256_zpsbf3dcf8e.png~original[/IMG]
Create the image you want. I used a simple one by using the custom shape tool by pressing "U" on your keyboard and with the
basic blending options.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/IconImage_zpsd788c709.png~original[/IMG]
The reason why the image is pixelated is because it is an icon image. Since the image is only 256x256 pixels when you zoom in on it that will get you the pixely result. The reason why I zoomed in is so you can see it. But don't worry this is no the end result. Just continue reading and you will see.
So once you have created the icon go ahead and press
file>save as>(under format choose the ICO)>and choose the name that you want to name it. And save it in your C: drive. You will see why to save it in your C: drive in a sec.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/SampleicoPic_zpsd252bfba.png~original[/IMG]
So now that you have created the icon and saved it now you can create the new library.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/NewLibrary_zps8ca703b2.png~original[/IMG]
Name the library whatever you want I named it "Sample" for tutorial purposes. Notice how it gives you a default boring icon image for your library.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Sample1_zpsb5472840.png~original[/IMG]
So now once you have created and named your library now it is time to get the icon image into place.
Go to computer/c: Drive/users/YOU/ And now once you have reached this area you will need to access a hidden folder named "appdata" to do so press "Alt" then a menu bar will show. Click
tools>folder options>and view. Find the option to view hidden folders then press apply then ok. Now we shall continue so AppData>Roaming>Microsoft>Windows>Libraries
Now you should see all the libraries including the one you just created.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/showhiddenfolder_zpsad4a3c94.png~orig inal[/IMG]
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Libraries_zpsf6243bc0.png~original[/IMG]
Once you have reached your destination then open a new text document with notepad and drag the library you just created in notepad. The result should look like this:
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Notepad_zps251a86f0.png~original[/IMG]
once you have reached this point click at the end of the second to last line down then press enter and enter in this information
<iconReference>c:\"NAME OF ICO FILE YOU CREATED IN PS".ico</iconReference>
Example:
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/iconreference_zps1c1a3eca.png~origina l[/IMG]
Once you have entered that information go to file>save and the icon image should appear on the library you created.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Finished_zps267f893a.png~original[/IMG]
Now you are officially finished. Go and spread the news and joy. Bye for now
-Dusty951512

It is Windows only because all those screen shots are exclusively Windows, the file structure and paths do not resemble those of the Mac in the least. As a Mac user, there's nothing I could take from your tutorial. Sorry,
No drives named with letters like C: on the Mac, for instance. No backward slashes either, ever. No such paths either. No "Notepad" on the Mac, we use TextEdit; but such a text editor is not remotely needed on the Mac to make and/or edit icons. Etc.
Those folders are not even called "Libraries" on the Mac… Nothing resembling your tutorial at all.
The icons in the Finder's Sidebar are not customizable at all in recent version of OS X.
= = =
You can edit any post of yours only until someone replies to it. At this time your post is not editable by you any longer.

How to make the swing drawings to appear in a specific jPanel?

hi,
I have a frame which I divided in two panels - one for the jComboBoxes/buttons and the other one for showing graphics. but the paint(Graphics g) overpaints it all =(
how should my code look like if I want some rectangles (depending on the combo choices and on button click which means update) to appear in the second panel?
the code's structure is like :
import *;
public class NewJFrame extends javax.swing.JFrame {
     private JPanel jPanel1;
public static void main(String[] args) {
          NewJFrame inst = new NewJFrame();
          inst.setVisible(true);
     public NewJFrame() {
          super();
          initGUI();
     public void paint(Graphics g) {
          g.fillRect (x, y, w, z)
     private void initGUI() {
          jPanel1 = new JPanel();
               // combo boxes and buttons
               // action listeners for them
          jPanel2 = new JPanel();
               // the place where the rectangles should be shown
               // and updated if combos are changed and button clicked
}now, I wonder if anyone could possibly give me a hint how to make it correctly, because I'm really a total newb in Java and I can't find any good examples from www which I've search through for the solution.
P.S. is there a plug-in for eclipse for visual programming of the graphics? =)
thank You for the kindest help!
J.M.

You should not be mixing AWT and Swing component in
a Swing application, so don't use a Canvas.
If you need some custom painting then you should
override the paintComponent() method of JComponent or
JPanel and then add this component to the GUIwhat does mean the override the paintComponent() method of JComponent or JPanel?
how can I add that component to the GUI?
=)
can you give a short code example, please! the code structure would be more than enough.
J.

How to make the values of a combination graph (bar and line) visible always

Hi ,
I am using jdev 11.1.1.6
i have created a combination graph which has a bar and line.
The data with respect to bar and graph were only visible when i keep the mouse pointer on it.
i need to set the values visible always.
kindly let me know how to make it.
In pie graph its by default showing the data always.
regards
Siva

Hi Sameh Nassar,
Thanks for the input, am using the combination graph and i dont have this property added till now.
i tried adding them manually in source but it didn't work. so I assume that this property is good with pie chart alone.
please correct me if am wrong.
This is my combination graph structure.
    <dvt:comboGraph id="comboGraph1"
                      value="#{bindings.testVO1.graphModel}"
                      subType="COMBINATION_VERT_ABS_2Y" shortDesc="Graph 1">
        <dvt:background>
          <dvt:specialEffects/>
        </dvt:background>
        <dvt:graphPlotArea/>
        <dvt:seriesSet markerDisplayed="true">
          <dvt:series lineWidth="0"/>
        </dvt:seriesSet>
        <dvt:o1Axis/>
        <dvt:y1Axis/>
        <dvt:y2Axis/>
        <dvt:legendArea automaticPlacement="AP_NEVER"/>
        <dvt:graphTitle text="Combination graph"/>
        <dvt:o1Title text="x axis"/>
        <dvt:y1Title text="y1 axis"/>
         <dvt:y2Title text="y2 axis"/>
      </dvt:comboGraph>
regards
Siva

How to make field editable in ALV tree in OOPs?

Hi Gems,
Again I need help from you all.
I am writing a program using OOPs and the uotput will be in ALV tree. I need to make a field editable in a perticular row.
I am doing it using layout but the program is giving error during
CALL METHOD CL_GUI_CFW=>FLUSH
      EXCEPTIONS
        CNTL_SYSTEM_ERROR = 1
        CNTL_ERROR        = 2.
This method is returning sy-subrc = 2 and I am unable to get the output.
I am using below code to make the field editable:
DATA: LT_LAYOUT_ITEM TYPE LVC_T_LAYI,
            LS_LAYOUT_ITEM TYPE LVC_S_LAYI.
LS_LAYOUT_ITEM-FIELDNAME = 'ACPCKTWRT'.     "ACPCKTWRT is the field name in the Internal table
LS_LAYOUT_ITEM-EDITABLE = 'X'.
APPEND LS_LAYOUT_ITEM TO LT_LAYOUT_ITEM.
CALL METHOD G_ALV_TREE->ADD_NODE
    EXPORTING
      I_RELAT_NODE_KEY     = FP_RELAT_KEY
      I_RELATIONSHIP       = CL_GUI_COLUMN_TREE=>RELAT_LAST_CHILD
      IS_OUTTAB_LINE       = LS_TMP_FINFCNO                                                "structure of the internal table
     IS_NODE_LAYOUT       =
      IT_ITEM_LAYOUT       = LT_LAYOUT_ITEM                                                "Added layout to make the field editable
      I_NODE_TEXT          = LV_NODE_TEXT                                                      "Node text
    IMPORTING
      E_NEW_NODE_KEY       = FP_NODE_KEY
    EXCEPTIONS
      RELAT_NODE_NOT_FOUND = 1
      NODE_NOT_FOUND       = 2
      OTHERS               = 3
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please help me and let me know how to get the solution.

Hello
The ALV tree control is not intended for making values editable (e.g. see
[How to make ALV tree columns editable|http://sap.ittoolbox.com/groups/technical-functional/sap-abap/how-to-make-alv-tree-columns-editable-2052414])
However, if you need an editable tree control then you have to use a different class (e.g. CL_ITEM_TREE_MODEL or CL_COLUMN_TREE_MODEL) but you will not have the ALV functionality of the ALV tree control.
Regards
Uwe

HOW TO MAKE A BOOLEAN FUNCTION IN LABVIEW5.0

I want to use a boolean funtion but it does not exist in existing functions?so how can I do it?I final aim is how to make a VALVE boolean function and how to use it?please teach me,experts! Thank you very much!

Hi,
what do you mean by "boolean function"?
For boolean operations you can use
1. Case structure. It is located in Functions->Structures
2. Boolean functions (such as AND, OR, NOT, etc.). They are located in Functions->Boolean
3. Comparison functions (such as equal?, greater?, less?, etc.). They are located in Functions->Comparison
You have to give more info about your problem.
Good luck.
Oleg Chutko.

How to make a RESET button in labview ?

how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???

abhinavb wrote:
how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???
You seem to have some misconceptions.
Is the array a control or an indicator or just some data held in a shift register or feedback node?
What you are probably looking for is an empty array. An empty array has a size of zero and has no elements (active or inactive). From your mentioning of "rows", you seem to have a 2D array.
The size of the array is independent of the visible size of the container.
Clearing an array means simply writing an empty array of the same datatype to it's terminal (or internal data structure). If the array is a control, you need to write to a local variable of it instead.
Can you show us some code so we can have a better understanding what exactly you mean by "array" in this context? Thanks!
LabVIEW Champion . Do more with less code and in less time .

How to make visible value attributes of a Search Node

Hi All,
We have a requirement to enhance the search context node SEARCH ( Dynamic Query Object SVYQ ) of component SVY_S.
But the enhancement category of Attribute Structure CRMST_QUERY_SVYIL is 'Can't be enhanced'.
So we are adding value attributes to this context node. How to make this value attributes available in view configuration tab?
Please suggest a better approach if there is any.
Thanks in adv.

Hi Suchindra,
You assign these enhanced attributes to design layer. so you can see these fields in Config tab.
How to do:
IMG->Customer Relationship Management -> UI Framework -> UI Framework definition -> Maintain
design layer
Here include the enhanced attributes and then go to component work bench and in context attributes right click assign the desing layer, selct your attribute and in the bottom click on SAVE button.
Then check it in configuration tab your attributes will available in show available fields.
I hope this will solve your problem
Regards,
Sagar

How to make a template in Photoshop CS5?

How to make a template in Photoshop CS5?

That would probably depend on what you mean exactly.
A template for what, which structure, …?

Need advice on how to make my website look better!

ive made a website for a security company but im just not 100% happy with it, i dont know if it doesnt look professional enough or things need changing design wise. i am open to any ideas on how to make my website look better, i also dont mind if anyone wants to dramtically change it if their idea is better. I would just very much appreciate a review and constructive critisism and ideas for a newly designed version of the site please!
[advertising slogan removed by host]
Thanks!

As a novice, some things I see: The footer has redundant, unecessary images (4 large images-for your services--REDUNDANT) odd? The text part of footer: text seems close, scrunched, have some space between heading and items, DO NOT CENTER TEXT!,
One of the service links bought to page with SAME LARGE image on homepage-change picture, don't use same large image for 2 different pages.
DO NOT use CONTACT US as 1 of 5 links on menubar. Do in another creative way, and/or use footer for contact. I think this looks amateurish (my opinion of course).
If I remember, the homepage and the rest of site, have exact same page structure.--See if you can atleast change the structure of inner pages versus the homepage.
Didn't look at enough, but..maybe...
each of your services should be a main menu link on your menubar. I would not put contact us on menubar, and you also had another menubar link with no dropdown( of course ok, but maybe could restructure)--Also your last service (on right of menubar)---why is that one different, and not included with the other services??
Seems like your menubar (items) structure could be reworked.--I would suggest, briefly looking at, to maybe have each service as a primary menu heading/title..YOU MAY NOT NEED A DROPDOWN MENU? Make sure if dropdown it is necessary.
Local security should be one of your services.
Have your footer logo, as is to left, but maybe put your footer links more to the right;;It will 'balance' the footer section
Your top logo seems too close to your main LARGE image (Which btw, seems oddly large compared to the rest of your site?)--That LARGE top image(the same palce on every same looking page), seems too big for your page--Why doen't it line up with the rest off your page content?

HOW TO MAKE FIELDS AS READ ONLY IN TABLE MAINTAINANCE

HI ABAPers,
HOW TO MAKE SOME FIELDS AS DISPLAY MODE.
FOR SUPPOSE, THERE ARE 5 FIELDS in SM30.
AMONG THEM 1 FIELD SHUD BE USED FOR EDITING AND THE OTHER 4 FIELDS SHUD ONLY BE USED FOR DISPLAY PURPOSE
WHEN EVER I ENTER A VALUE IN THAT 1 PARTICULAR FIELD THEN THE DATA OF THE REMAINING 4 FIELDS SHUD BE DISPLAYED IN THE SAME SCREEN ITSELF.
HOW CAN IT BE POSSIBLE...
PLZ HELP.
THNX IN ADV,
SP.

Hello SP,
You can create a maintenance view for the table & here you can define the maintenance attribute for individual fields.
For the fields you want to be READ-ONLY pass 'R' to those fields. (It is the 4th column from the left, the one to the immediate left of the Key column).
Don't change the TMG function group directly. If you regenerate the TMG the changes would be overwritten !
You can use the Event '01' to fulfill your requirement:
*&      Form f_event_01
*       text
FORM f_event_01.
DATA: v_indx TYPE sy-index,
        v_land1 TYPE land1,
        v_name1 TYPE name1.
FIELD-SYMBOLS: <vendor> TYPE lifnr,
                 <val> TYPE ANY.
BREAK-POINT.
"TOTAL contains all data which are read, changed and created in TMG
LOOP AT total.
    IF <action> = neuer_eintrag " New Entry.
    OR <action> = aendern "Changed entry
    OR <action> = original. "Same as DB
      READ TABLE extract WITH KEY <vim_xtotal_key>.
      IF sy-subrc = 0.
        v_indx = sy-tabix.
      ELSE.
        CLEAR v_indx.
      ENDIF.
      ASSIGN COMPONENT 'LIFNR' OF STRUCTURE total TO <vendor>.
      CHECK sy-subrc = 0.
*     select data from the LFA1 based on LIFNR
      SELECT SINGLE name1 land1 FROM lfa1
        INTO (v_name1,v_land1)
        WHERE lifnr = <vendor>.
      CHECK sy-subrc = 0.
*     Populate the hidden fields NAME1 & LAND1
      ASSIGN COMPONENT 'NAME1' OF STRUCTURE total TO <val>.
      CHECK sy-subrc = 0.
      <val> = v_name1.
      ASSIGN COMPONENT 'LAND1' OF STRUCTURE total TO <val>.
      CHECK sy-subrc = 0.
      <val> = v_land1.
      MODIFY total.
      CHECK v_indx GT 0.
      extract = total. "Pass the changes in TOTAL to EXTRACT
      MODIFY extract INDEX v_indx.
    ENDIF.
ENDLOOP.
sy-subrc = 0.
ENDFORM.                                                    "f_event_01
BR,
Suhas
Edited by: Suhas Saha on Aug 16, 2010 11:58 AM

HOw to make an Object oriented alv respond to double click

Hi all,
HOw to make an Object oriented alv respond to double click.SAmple code will be helpful.
Thanks in advance,
Alex.

Hi,
1. Create a Control (for Custom and Split Containers only)
2. Instantiate a Container Object (in case of Custom and Split Containers, specify the control which is created by us in Screen painter) CREATE OBJECT
3. Instantiate an Object of the kind of report that has to be displayed (List, Grid or Tree). CREATE OBJECT . Here we need to specify the Parent Container as the so that it sits in that container.
4. Call appropriate methods to display the report on the screen. CALL METHOD ->
DATA : g_dock TYPE REF TO cl_gui_docking_container,
g_split TYPE REF TO cl_gui_easy_splitter_container,
g_cont1 TYPE REF TO cl_gui_container,
g_cont2 TYPE REF TO cl_gui_container,
g_grid1 TYPE REF TO cl_gui_alv_grid,
g_grid2 TYPE REF TO cl_gui_alv_grid.
i_mara is an internal table of structure MARA
SELECT * FROM mara INTO TABLE i_mara.
i_kna1 is an internal table of structure KNA1
SELECT * FROM kna1 INTO TABLE i_kna1.
To create an Object of type Docking Container
CREATE OBJECT g_dock
EXPORTING
side = cl_gui_docking_container=>dock_at_top
extension = 200 .
To Create an Object of Type Split Container. Here we can see that the Docking *Container Created above has been used as a parent .
CREATE OBJECT g_split
EXPORTING
parent = g_dock
orientation = 1 .
Easy Split container splits one Control into 2 manageable controls, each of them is used * to handle one GUI Container each
g_cont1 = g_split->top_left_container.
g_cont2 = g_split->bottom_right_container.
To Create an Object of type Grid . Here we can see that the Left Split Container * Created above has been used as a parent .
CREATE OBJECT g_grid1
EXPORTING
i_parent = g_cont1 .
To Create an Object of type Grid . Here we can see that the Right Split Container * Created above has been used as a parent .
CREATE OBJECT g_grid2
EXPORTING
i_parent = g_cont2 .
The method of Grid Control Object is used to display the Data.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'MARA'
CHANGING
it_outtab = i_mara[] .
The method of Grid Control Object is used to display the Data.
CALL METHOD g_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'KNA1'
CHANGING
it_outtab = i_kna1[] .
Regards
Hari

How to make serializable object in webdynpro?

Hi
I have written the following code... when i am executing i am getting the following error..........
<b>javax.xml.rpc.soap.SOAPFaultException: Deserialisation failed</b>
I think is it becoz of data... how to make it serializable
     Request_Z_BAPI_CUSTOMER_CHANGE_WS_customerChangeFromData customer = new Request_Z_BAPI_CUSTOMER_CHANGE_WS_customerChangeFromData();
     ComplexType_CustomerChangeFromData complexType = new ComplexType_CustomerChangeFromData();
     ComplexType_Bapikna101 bapi = new ComplexType_Bapikna101();
     Bapikna101 bapi1 = new Bapikna101();
     bapi1.setCity("RIYAD");
     bapi1.setCountraiso("SA");
     bapi1.setCountrniso("SA");
     bapi1.setCountry("SA");
     bapi1.setCountryiso("SA");
     bapi1.setFaxNumber("12345678");
     bapi1.setFirstName("First Name");
     bapi1.setInternet("[email protected]");
     bapi1.setDateBirth("12.12.2006");
     bapi1.setLanguIso("EN");
     bapi1.setName("Name");
     bapi1.setName3("Name 3");
     bapi1.setName4("Name 4");
     bapi1.setRegion("GB");
     bapi1.setFormOfAd("Address");
     bapi1.setStreet("Street");
     bapi1.setPostlCode("12345");
     bapi1.setLangu("X");
     bapi1.setTelephone("12345678");
     bapi1.setTelephone2("12345678");
     bapi1.setCurrency("INR");
     bapi1.setCurrencyIso("INR");
     bapi1.setOnlyChangeComaddress("X");
     complexType.setCustomerNo("0000040009");
     complexType.setPiDistrChan("01");
     complexType.setPiDivision("01");
     complexType.setPiSalesorg("QNIN");
     customer._setUser("abap");
    customer._setPassword("quinnox");
     CustomerChangeFromData data = new CustomerChangeFromData();
     data.setPiAddress(bapi1);
     //bapi.setOriginalBean(bapi1);
     complexType.setOriginalBean(data);
     wdComponentAPI.getMessageManager().reportSuccess(" "+complexType.getOriginalBean().getCustomerNo());
     wdComponentAPI.getMessageManager().reportSuccess(" "+complexType.getPiAddress());
     wdContext.nodeRequest_Z_Bapi_Customer_Change().bind(customer);
     complexType.setPiAddress(bapi);
     wdComponentAPI.getMessageManager().reportSuccess(" "+data.getPiAddress().getCity());
     customer.setParameters(complexType);
help me
Best Regards
Ravi Shankar B

Hi ashuthosh,
What is the structure of your import and Export parameters of your RFC.
There are 2 ways to acheive it.
In the RFC either
1. Use a Table parameter
2. Use a Export Structure
If you use a Table parameter in your RFC then in your webdynpro when you import your adaptive RFC model you would get the Table as a class.
Assume your RFC/BAPI is called "Bapi_RFC_Insert"
write the code
Bapi_RFC_Insert in = new Bapi_RFC_Insert();
wdContext.nodeBAPI_RFC_Insert_InputElement().bind(in);
<TableName> <someName> = new <TableName>
<someName>.setTabValue1();
<someName>.setTabValue2();
in.add<>(<someName>);
This should pass values as a batch.
You can also do this using Export parameters. But a table is much better.
Let me know if you require more information.
regards
ravi

How to make BMSEG structure in Flatfile?

Similar Messages

Maybe you are looking for