How to make case struture be finished

I have program and one part of it works for feedback. When pressure riches some critical value it opens valve(automatic mode). As a result pressure drops back. It can work as well in constant mode: opens valve periodically for some period of time. It works perfect in periodical mode, but when I use automatic mode it works just partially: when the valve openes it reduces the pressure and condition for beginning of case structure changes. If pressure becomes lower and again higher then critical it opens valve again but I want it to be opened in same manner as in periodical mode(When the pressure reaches critical it should open valve for fixed period of time and repeat this if necessary only after some minimum fixed time).
So the question is how to make the automatic mode work.
I have put a gif image of part of VI that does this job and full VI as well.
Thanks.
Attachments:
example.GIF ‏10 KB
Vibrafilter.zip ‏350 KB

Thanks   johnsold
for responce.
I know that is not simple to read this vi, too much stuff in it.
For this reason I have put .gif image of vi part I am intereasted in and I forgot to mention that this part of is moved in a right upper corner of vibrafilter.vi.
In this vi everything works already and i just need this issue (mentioned in previous post) to be fixed. It is quite simple: I have signal from pressure transducer and depending on my system behaviour I can use either automated valve opening or just periodical opening to stabilyze the pressure. Valve opens for some fixed period of time and next time it opens only after some time gap. Periodical valve opening works perfect.
For automated valve opening I am using pressure transducer signal which is compared with some constant value. But it does not work properly it opens valve just for a fraction of time and closes again and then can opens again if the pressure is again gets high.  I would like to trigger "periodical valve opening" for one cycle, and repeat it only if it is necessary(pressure higher than some consant).
Hope it hepls to understand my problem.

Similar Messages

  • How to make CASA module re-configure ?

    Hi All
    My customer has some workstation login very slow(4~10 mins) about these weeks...I find the reason is User Module (because I disable the module, login speed could decrease to 20 seconds),temporary solution that I reinstall ZCM Agent...but it spend much time....
    I want to re-reconfigure CASA let he re-Scan the workstation for get correct configure or parameters......How to make re-Reconfigure CASA ?? and I have another question that I try to deliver CASA.msi...and add "/qn /norestart" parameter...but it still reboot automatically....How paramter I add to make the msi "norestart" ??
    wyldkao

    Originally Posted by wyldkao
    Hi All
    My customer has some workstation login very slow(4~10 mins) about these weeks...I find the reason is User Module (because I disable the module, login speed could decrease to 20 seconds),temporary solution that I reinstall ZCM Agent...but it spend much time....
    I want to re-reconfigure CASA let he re-Scan the workstation for get correct configure or parameters......How to make re-Reconfigure CASA ?? and I have another question that I try to deliver CASA.msi...and add "/qn /norestart" parameter...but it still reboot automatically....How paramter I add to make the msi "norestart" ??
    wyldkao
    wyldkao,
    I had this exact issue, so far the only way I have found round this is to uninstall the CASA first and then install with /norestart - no matter what I tried it would automatically restart via a repair.
    I haven't found any issues yet... though I'm sure someone could advise if this will cause an issue.

  • MOVED: how to make a good flow in the case?

    This topic has been moved to Off Topic Technical.
    how to make a good flow in the case?

    Browser variation is something we must all deal with.  For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid).  Then get a CSS Layout that meets your requirements.
    PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
    http://www.projectseven.com/products/index.htm
    CSS Layout Magic (commercial extension for Dreamweaver)
    http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How to make a clipping mask in this particular case?

    Okay, Just to begin I know how to make a clipping mask, but for the case that I'm going to present right now I just can't figure out what mistake I am doing (if any). However I am a beginner.
    http://vector.tutsplus.com/tutorials/illustration/how-to-create-a-medieval-paper-scroll/
    In the link to above tutorial on how to make a medieval scrol I'm stuck at step 25 and would be glad to anyone who helped.
    As said in step 25 that expand the appearance of the scroll and select the two then clip the mask. In th above picture I have just selected the scroll to show how it looks.
    Now as you can see in the image below I have expanded the appearance of the paper scroll. Then I selected the paper scrol and the yellowish green grunge background placed below it. And the moment I hit Ctrl+7 (in windows) or Command+7 (in Mac) to make a clipping mask the error that showed up has been highlighted.
    One more thing, I have clipped masks before too in the same tutorial given above but I don't know what has gone wrong for me in this step.
    Please help.
    Signed,
    Awais Rauf

    Why would you want a clipping mask? I don’t see a reason for it.
    However, for what you want I would use the Pathfinder panel to combine all the paths into one shape. First use the ungroup and release compound commands a few times each, to make sure you have nothing grouped. Then press the top left button in the Pathfinder p[panel. This should produce one closed path that just surrounds the scroll.

  • Trying to enter hotel password and 1st letter is always upper case and password is lower case.  Can't figure out how to make 1st letter lower case

    I am trying to enter a hotel password for internet access.  The password is all lower case, but the 1st letter I type is always upper case and I can't figure out how to make it lower case.  Help?

    The digital keyboard on the iPad uses an "Up Arrow" as a symbol to represent its shift key(s). If it's highlighted, then the next letter typed will be upper-case. Just tap on the Arrow symbol and it should be unhighlighted. Now if you type any letter, it will be lower-case.

  • How to make an excutable from a finished vi?

    I have a program that is practically finished but I am unsure how to make it a stand alone executable. I wouls like it so that I could but it on disk and use it on other machines that do not have Labview. Thanks

    Heather,
    With the Application Builder you can make standalone executables. The application builder is included in the LabVIEW professional package, but if you have Base of Full package, you will have to buy the Application Builder as a separate add-on tool.
    Once you build your VI into an executable, it will have .exe extension, and you will no longer need LabVIEW to run it.
    You can run it with the LabVIEW run-time engine. This engine can be installed from any LabVIEW CD, or download from our web site:
    http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C130D?opendocument&node=132070_US
    To order the Application Builder, either contact your sales representative, or order it on line at:
    LabVIEW Application B
    uilder for Windows
    http://sine.ni.com/apps/we/nioc.vp?cid=10731〈=US
    Zvezdana S.
    National Instruments

  • How to make oracle is case insentive ( not case sensitive)

    SqlServer by default is NOT case sensitive (data content) while Oracle by default is case sensitive (data content).
    please help me to give the solution
    How to make oracle is case insentive ( not case sensitive)
    if there is anyway to make Oracle behave like SqlServer changing NLS settings or any other Oracle settings?
    I have solution for application level . it is working fine
    Possible solutions:
    1. You want to store data case insensitive: do an 'insert...
    values(upper('Abcd'))...'.
    This will put your data in upper case into the tables.
    2. Your data will be mixed-case and you want to select them case
    insensitive:
    create 'function based indexes' on every column you want to use in
    your where-clauses.
    Then 'select ... where <column_name> = 'ABCD'.

    What version of Oracle? Oracle 10g has a capability that can toggle this feature on and off at the session level. Prior versions do not.
    For prior versions you usually have to make use of the upper and/or lower functions in your queries. Sometimes a function based index, FBI, is used to handle this.
    HTH -- Mark D Powell --

  • How to make a copy of my install disk in case original is lost/misplaced.

    This is Lester,
    Need advise how to make copy(s) of my install disk for a rainy day. Went to APP'S utility disk and was confused.
    Advice is appreciated. Thanks to all who respond. L.

    Launch Disk Utility and peruse it's help files. Fairly straight forward. If you're still confused, see Kappy's reply in http://discussions.apple.com/thread.jspa?messageID=7898689

  • How to make a round border around my picture?

    I am trying to design a logo that would fit into the center of a Frisbie, yet I cannot figure out how to make a round border around the picture. I have tried using the eliptical tool, and have also tried using the cookie cutter. The only option I can get to work with the eliptical tool, is the feather, yet I can't change the pixel number for some reason, so it just makes a thin circle around the picture. I thought I could cut and paste it, but the copy and cut options were grayed out and didn't work. When I used the cookie cutter, it made a nice border, and I pasted the picture into it, but, there are four sections that need to be filled in with the background color and the paintbucket didn't work in those spaces (they are the gray and white checked areas. (the picture ends up looking like a rectangle inside of a circle). So I made a new blank file and filled it in with the color of the picture's background, hoping to use the cookie cutter tool around the picture that was now pasted into the new blank file (I chose another color for the round border) and I used the cookie cutter around the picture, but when it was finished, the whole picture ended up being white. All I want to do is to make a border around a picture (a round border). Nothing I have done has worked though. What am I doing wrong, or what are some other options for trying to do this? Thanks.

    Here is a simple way to add a border. Select the item, add a blank layer, choose the border size and color and the Outside option:
    Here is the result:
    Note that you don't even need to do the Stroke on a blank layer. You can Stroke directly on the picture layer. However having the blank layer preserves the picture in case you want to start again with different Stroke options.
    If this is not what you are looking to do, please clarify.

  • How to make Recovery Partition in my new HDD (Win8.1)

    I already re-install my Win8 with usb.
    But after finish the installation (I choose Fully Clean in my new HDD), why there is no Recovery Partition like my old HDD (original HDD)?
    how to make a Recovery Partition in my new HDD?
    Thx

    Creating the recovery partition
    Right-click the start orb, and start 'Disk Management'.
    Shrink the C: drive by let's say 20-30GB.
    Then create a new Partition and assign the R: label to it and name it RECOVERY.
    Then open command prompt as administrator and type: 'recimg /createimage <directory>',
    In this case: 'recimg /createimage R:\' to save it on the new partition.
    This step may consume a lot of time.
    Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
    'recimg /setcurrent R:\'
    Voila you are done.
    Restoring from recovery partition
    You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
    Press the Windows-key + C to open the charms bar or swipe in from the right.
    Click Settings.
    Click Change PC Settings.
    Click Update & Recovery in the menu on the left.
    Click Recovery.
    If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

  • I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks

    I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks
    just getting started so I would appreciate some assistance
    Mike

    Quit Mail. Force quit if necessary.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens by pressing command-V, then press return.
    A folder window will open. Inside it there should be files with names as follows:
              Envelope Index
              ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

    Hi my name is vishal
    For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
    Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.Data.SqlClient;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    using System.Diagnostics;
    using System.IO;
    namespace DRRS_CSharp
    public partial class frmPDF : Form
    public frmPDF()
    InitializeComponent();
    private void button1_Click(object sender, EventArgs e)
    Document doc = new Document(PageSize.A4.Rotate());
    var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(6);
    table.TotalWidth =530f;
    table.LockedWidth = true;
    PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
    cell.Colspan = 6;
    cell.HorizontalAlignment = 0;
    table.AddCell(cell);
    Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
    para.Alignment = Element.ALIGN_CENTER;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(105f, 105f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("Reprocessing Date");
    table.AddCell("Patient Name");
    table.AddCell("Dialyzer(Manufacturer,Size)");
    table.AddCell("No.of Reuse");
    table.AddCell("Verification");
    table.AddCell("DialyzerID");
    while (dr.Read())
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
    table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
    table.AddCell("@count".ToString());
    table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
    table.AddCell(dr[0].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(table);
    doc.Close();
    System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
    if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
    var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
    this.Close();
    The above code executes well with no problem at all!
    As you can see the file to which i create and save and open my pdf report is
    AssignedDialyzer.pdf.
    The column headers of table in pdf report from c# windows forms using iTextSharp are
    "Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
    "DialyzerID".
    However the problem i am facing is after execution and opening of document is my
    column headers in table in pdf report from
    c# and datas in it all appear in bold.
    I have browsed through net regarding to solve this problem but with no success.
    What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
    Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
    I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
    Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
    If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
    vb6,adodb with ms access using iTextSharp?
    I have approached Sound Forge.Net for help but with no success.
    I hope anyone/someone truly understands what i am trying to ask!
    I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
    Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
    I hope i get a reply in terms of solving this problem.
    vishal

    Hi,
    About iTextSharp component issue , I think this case is off-topic in here.
    I suggest you consulting to compenent provider.
    http://sourceforge.net/projects/itextsharp/
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to make an icon image using Photoshop

    I found out how to do this recently so I decided that I wanted to make a tut for those who don't know how to make an icon image. This icon image is for the libraries tab on your computer. Under the libararies tab there is Music, Pictures, Documents, and Photos
    First you will need the ICO (Icon image format) Format extension for photoshop which can be downloaded here:
    http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html
    The download link and tutorial on how to install it is all in the link above.
    Once you have that all set you can now launch photoshop to create your icon image. Once you have launched it, create a new document with the size as in the image below.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/256x256_zpsbf3dcf8e.png~original[/IMG]
    Create the image you want. I used a simple one by using the custom shape tool by pressing "U" on your keyboard and with the
    basic blending options.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/IconImage_zpsd788c709.png~original[/IMG]
    The reason why the image is pixelated is because it is an icon image. Since the image is only 256x256 pixels when you zoom in on it that will get you the pixely result. The reason why I zoomed  in is so you can see it. But don't worry this is no the end result. Just continue reading and you will see.
    So once you have created the icon go ahead and press
    file>save as>(under format choose the ICO)>and choose the name that you want to name it. And save it in your C: drive. You will see why to save it in your C: drive in a sec.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/SampleicoPic_zpsd252bfba.png~original[/IMG]
    So now that you have created the icon and saved it now you can create the new library.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/NewLibrary_zps8ca703b2.png~original[/IMG]
    Name the library whatever you want I named it "Sample" for tutorial purposes. Notice how it gives you a default boring icon image for your library.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Sample1_zpsb5472840.png~original[/IMG]
    So now once you have created and named your library now it is time to get the icon image into place.
    Go to computer/c: Drive/users/YOU/ And now once you have reached this area you will need to access a hidden folder named "appdata" to do so press "Alt" then a menu bar will show. Click
    tools>folder options>and view. Find the option to view hidden folders then press apply then ok. Now we shall continue so AppData>Roaming>Microsoft>Windows>Libraries
    Now you should see all the libraries including the one you just created.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/showhiddenfolder_zpsad4a3c94.png~orig inal[/IMG]
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Libraries_zpsf6243bc0.png~original[/IMG]
    Once you have reached your destination then open a new text document with notepad and drag the library you just created in notepad. The result should look like this:
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Notepad_zps251a86f0.png~original[/IMG]
    once you have reached this point click at the end of the second to last line down then press enter and enter in this information
    <iconReference>c:\"NAME OF ICO FILE YOU CREATED IN PS".ico</iconReference>
    Example:
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/iconreference_zps1c1a3eca.png~origina l[/IMG]
    Once you have entered that information go to file>save and the icon image should appear on the library you created.
    [IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Finished_zps267f893a.png~original[/IMG]
    Now you are officially finished. Go and spread the news and joy. Bye for now
    -Dusty951512

    It is Windows only because all those screen shots are exclusively Windows, the file structure and paths do not resemble those of the Mac in the least.  As a Mac user, there's nothing I could take from your tutorial.  Sorry, 
    No drives named with letters like C: on the Mac, for instance.  No backward slashes either, ever.  No such paths either.  No "Notepad" on the Mac, we use TextEdit; but such a text editor is not remotely needed on the Mac to make and/or edit icons.  Etc.
    Those folders are not even called "Libraries" on the Mac…  Nothing resembling your tutorial at all.
    The icons in the Finder's Sidebar are not customizable at all in recent version of OS X.
    =  =  =
    You can edit any post of yours only until someone replies to it.  At this time your post is not editable by you any longer.

  • How to make Help view well on both laptops and desktops

    Hi -- I'm trying to learn RoboHelp 7 and just created my first WebHelp project. I want to show it to a friend, but don't have a server I can publish it to, so I copied all the files onto my flash drive and put it on my laptop. It all works fine, which is a relief -- however, the custom colors are way off, and some of the screenshots are now too big, so the user would have to scroll (which can be annoying). I created it on my desktop and have been looking at it on a larger monitor (1680x1050), but the laptop is old (1024x768). The thing is, a lot of people might have to view it on 800x600.
    I couldn't find any information in RH's Help about how I should have set it up so that it views well on different systems. I'm hoping someone could please advise me as to what I should have done, and if there's anything I can do now to fix it, or point me to some information. I used Arial 10 pt for the text, and now it looks 12 pt. Should I have made it 8 pt? Is there a rule for how large an image should be to be viewed on a laptop and a desktop?
    One last thing, it's too large to put on a CD, so is does anyone know how to make this into an executable?
    Thanks in advance for any help you can give!
    Daryl

    Hi Daryl
    I use an eBook compiler to convert WebHelp to an executable file. You might investigate eBook compilers for that bit. However, I'm not sure how that would help you since a compiler will do little more than to take a swarm of WebHelp files and store them in a wrapper to create a single file. Generally you will end up with something that although it exists as a single file, is larger than what is inside.
    Are you SURE it's too big for CD? CD will hold 650 megs (700 if you buy the extended types).
    On the screen size issue WebHelp itself should adapt fine. Probably it's the images you are concerned with. And the general rule of thumb is to capture images at a reasonable size to begin with. Never EVER just insert a big ole image into RoboHelp and grab the sizing handle to make it smaller. It will still consume a larger amount of space and the quality will suffer badly. So the best approach is to copy the image at a reasonable size to begin with. Something that may fit nicely in the Topic Pane area as it is presented in the space provided by the lowest common denominator. In your case I believe you said that many are still at 800x600.
    Your 10 point text will still be 10 points at a smaller resolution. It will just look a bit different.
    Hopefully this helps... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

    Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

    Erica,
         I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
         I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it.  His links to the Apple discussion and support pages warrant your time and attention.
         It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
         Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987. 
         I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
       For the rest of us, please post when you find a solution.
         Best.
         BPW
      (Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

Maybe you are looking for