How to make cursor lines appear in saved file

I have a graph that has 3 cursor lines. They are visible on the graph.
When saving the graph to a file (.png or .jpg) the graph waveform is visible, but the cursor lines are not.
The image data does not contain the cursor lines. How do I include those to the image data.
I verified the image data using an image indicator and the appropriate VI.. So for some reason, the image that is being saved is of the indicator (Waveform Graph) and the waveform (data), but not the cursor lines.
I'm sure I've saved images of a graph that included the cursor lines in the past (LV7.x), but I cannot remember what I did.
Thanks,
RayR

Thanks Christian,
I (may) have found the problem... At one point, I clear all cursor lines. I may have a race condition between clearing the lines & saving image to file.
I did see the cursor lines in one instances when I stopped the program prematurely.
I knew it had to be siomple. I didn;'t recall doing something special the last time I did this..
Thanks!
RayR

Similar Messages

How to make Deactivate line appear in T.code FTXP in testing client

Requirement is that Deactivate tab should appear in my testing client. Right now it is not appearing. It is appearing in the Development Client.
The necessary changes have been carried out in respect of a tax code (pertaining to FI only )by deactivating line in Development client and through export a new request has been created and the relevant tax code has been saved. I cannot do the import in testing client since it is grey in colour. Through SCC1 the request has been moved to the testing client.
I cannot create a new tax code with new rate even though it should be as per standard SAP since I cannot educate all my more than 25 users who are well versed with that Tax code and who operate it everyday. This Tax code is not used by either MM or SD. It is used only in FI.
But the changed tax rate which is already there in development client has not reflected in the testing client. My requirement is I should see deactivate line in testing client so that I can deactivate the old rate which is being used only in FI transactions and new tax rate percentage can be incorporate through fv12. Without deactivation system is not allowing me to change since tax indicator has already percentage rate in it. Our basis team says the client is locked. What is to be done?

Clck on the line and click on the button Deactivate line this you have to do in the development system.
Create a transport.
When you save you get a message read this message!!!!!!!!!
These are the action after the transport in Qxx and Pxx
Please run program RFTAXIMP for :
Transport Order D0xxxxxxx
Country = and process the BDC*
Dependend of your settings you have to open the system for config before you can run the BDC

Saving large tiff files we see a lot of times the lines in the saved file that have either missing ( white) pixels or they appear as a black line across entire file or portion of it

saving large tiff files we see a lot of times the lines in the saved file that have either missing ( white) pixels or they appear as a black line across entire file or portion of it

Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to make new line in JButton.setText()?

how to make new line in JButton.setText()?
I want to set the text of jbutton in tow line ,as follows
| jbutton-line1 |
| xxxxxxx-line2 |
i konw i can jbtton.settext("<html>line1<br>line2</html>");
but i find it's ugly using html,
is there anyother way to create new line in JButton's Text

As for the above comment....
I thought the question was well purposed. Using HTML was not acceptable in this instance, which was made clear, so why critisize his comments? "Using HTML" is a poor solution, it does NOT work in many instances due to browser, OS variations. Usually the "common answer" is never a COMPLETE answer.
Possible Solution:
Use JLabels to render the text on the button.
import javax.swing.*;
import java.awt.*;
public class ButtonMaker {
public static void makeButton(JButton jb, String[] titleList) {
jb.setLayout(new FlowLayout());
for (int i = 0; i < titleList.length; i++) {
JLabel tmpLabel = new JLabel(titleList);
tmpLabel.setForeground(Color.black);
jb.add(tmpLabel);
public static void clearButton(JButton jb) {
Component[] cList = jb.getComponents();
for (int i = 0; i < cList.length; i++) {
if (cList[i] instanceof JLabel)
jb.remove(cList[i]);
Known Limitations:
1. Flowlayout does not work well with single line text buttons... perhaps another layout manager may work better for various buttonsizes-linenumber combos.
2. Mac OSX : The default UI for Mac OS X (and above it seems), is to have rounded edged buttons. These rounded edges are destoryed when using JLabels, leaving a square, blocky button in its place.
POSSIBLE SOLUTION:
(this is ugly and time consuming)
- create images of the button with text on them.

How to make a button appear boxed in when clicked

For my Prototyping class I have to make an interactive fast food ordering system. I have majority of frames made I just need to add the interactive part to it. I am using AS2 in Flash CS3. I have the picture and the text grouped and are classified as a button. I want to make it so that when the picture or text is clicked it will make a black box appear around it, making it 'selected'. I've tried to add an Event Listener but couldn't figure out how to make the box appear on it. Any suggestions?
These pictures are basically what I'm trying to accomplish.
Keep in mind, I'm a Flash newbie, I have a probably 3 hours experience with Flash.
But I do have knowledge of basic Java commands, so I can understand code.
Thanks,
Dudejoe04

Onw way would be to create the buttons as movieclips so that when they are selected you move the movieclip's timeline to a rame that shows the rectangle around it. Another way would be to have the movieclips as separate objects that you make appears when its associated button is clicked. There are likelynumerous other possibilities.

How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes to convert CDs to Apple loselss?

How to make iTunes Match not convert my files ALACs in 256 kbps (VBR)? How to get iTunes convert CDs in Apple loselss? The difference between 256 (VBR) and Apple Losless is very clear...

Dear Michael, good day!
1. As per your instruction, I turned off iTM.
Small discrepancy – where are two screens with iTM switch:
-Settings > iTunes & App Store.
-Settings > Music
I switched OFF in both.
NB: I turned device to English for convenience.
2. My next step was Setting > General > Usage – tapped {Music};
{All music} screen appeared; I swiped it and taped Delete.
3. I performed “hard reset” …………………………………..
4. Switched back On iTM
5. Taped Music app on Home screen
iTM has started – (it took 18 minutes to completed, 60 mbps Wi-Fi speed )
Regret to inform… All the same:
Erase and reset to factory default? Or I did smf wrong?

How to Make Itunes Recognize Foreign Characters in file names?

How to Make Itunes Recognize Foreign Characters in file names?
Any Body, please
DELL Windows XP Pro

That's not how it's supposed to work according to this: http://www.griffintechnology.com/support/italkpro/
By default, a playlist will be created in iTunes called "Voice Memos" and those files will be transferred there automatically. The files themselves can be found on your computer in your iTunes Music folder in Unknown Artist > Unknown Album.
It may be worth working through any trouble shooting articles on that site.
Regards,
Colin R.

How to make an openfiledialog? (browse a file and put it in a parameter)

How to make an openfiledialog? (browse a file and put it in a parameter)
Best Regards

hi,
check the code below:
FORM sub_gui_download.
* Define local variables
DATA:
    lo_fullpath       TYPE string,
    lo_filename       TYPE string,
    lo_path           TYPE string,
    lo_user_action    TYPE i,
    lo_encoding       TYPE abap_encoding.
* Define local constants
CONSTANTS:
    lc_encoding(1) TYPE c VALUE 'X',
    lc_directory TYPE string VALUE 'D:',
    lc_filetype TYPE char10 VALUE 'DAT',
    lc_separator TYPE char01 VALUE 'X',
    lc_blank TYPE char01 VALUE ''.
* Call method to create dynamic save_path and save_format
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      with_encoding        = lc_encoding
      initial_directory    = lc_directory
    CHANGING
      filename             = lo_filename
      path                 = lo_path
      fullpath             = lo_fullpath
      user_action          = lo_user_action
      file_encoding        = lo_encoding
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
* Check user_action
IF lo_user_action <> cl_gui_frontend_services=>action_ok.
    EXIT.
ELSE.
*   If user_action equals to action_ok, call function module to download datas
*   using download table i_dwn_tab
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                = lo_fullpath
        filetype                = lc_filetype
        write_field_separator   = lc_separator
        trunc_trailing_blanks   = lc_blank
      TABLES
        data_tab                = i_dwn_tab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        OTHERS                  = 22.
    IF sy-subrc <> 0.
      MESSAGE i007.
    ENDIF.
ENDIF.
ENDFORM.

How do you make a line appear to draw itself?

I want to make a border appear to be "drawing itself" around
a rounded rectangle on my site, how would I go about doing it? I'm
sure it's easy but for the life of me I can't figure it out. Also,
I want to have an X appear to draw itself on the site to cross out
some text, how would I do this? (the X I want to use is a graphic,
not a vector graphic).
Thanks big time!

xslamx wrote:
> I want to make a border appear to be "drawing itself"
around a rounded
> rectangle on my site, how would I go about doing it? I'm
sure it's easy but
> for the life of me I can't figure it out. Also, I want
to have an X appear to
> draw itself on the site to cross out some text, how
would I do this? (the X I
> want to use is a graphic, not a vector graphic).
http://www.mudbubble.com/db_tutorials/db_tut_write2.html
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

How to make curved lines in image more smooth and clear

How do i make this clear its and image, i want to make the lines really clear and smooth

Quick and dirty:
Use Gaussian blur to soften the edges, (I used a value of 2). The use levels, and drag the black and white sliders towards thge center.
Much better to create from scratch using the rough graphic as a template. If it is a one off, then just stroke a path for the circular outlines, and use a layer mask for the break in the inner circle.
For the curved text, the simplest way is to use the type tool, and then the Create warped text tool from the Options bar, but I doubt you'd get a tight enough curve, so you'll need to use Type on a path. The easiest way to do that in this case would be to drag out a circular selection with the Marquee tool using the Shift and Alt/Opt keys, and then use the Make work path from selection icon at the bottom of the Paths panel. Hover the Type cursor over the path and type your text. If you use Center justified and start at the top, to keep it symetrical, but I just get it close, and fix it with Free Transform. The rest is straight forward. I used Areil bold for curved text, and Times New Roman bold for the center text. Use a custom shape for the Tick. If the tick is not quite to your liking, use the Direct selection tool (a) to drag the points to a better shape.
If you want to use this in a layout program like InDesign, save the layered document as an EPS file, which will be (mostly) vectored and scaleable in InDesign. You'd need to use Shape layers for the two circles to make it fully vectored.

How to make the inputs appear in Playback

Hi,
I would like to know how to make the inputs (line-in, mic, SPDIF-in) appear in playback of windows's mixer ?
Im running XP pro sp3 with XFI Extreme Audio PCI-Express.
I dont know why but there is no inputs in playback that making me unable to hear it while its being recorded.
<img border="0" height="405" width="640" src="http://img70.imageshack.us/img70/672/mixergq0.png">
<img border="0" height="542" width="640" src="http://img399.imageshack.us/img399/486/allmysettingsmq2.png">
Message Edited by Nuja on 0-06-2009 2:07 [email protected]

- I've read a little more and come to these conclusions:
. The instructions presume that a CD is included with the card for the purpose of installing the software. A CD/DVD reader is a requirement for this reason.
2. The card uses Intel HD Audio. This changes enough of what I know about CL's card that I really don't know that the lack of external inputs in the playback mixer is not intentional and uni'versal. A recording application could let you listen to what is being recorded by having an option of playing back what's being recorded.
I have enough uncertainty now that I don't think it's useful for me to continue commenting. If someone who has a? PCI Express X-Fi Xtreme Audio that came with the software CD and hard-copy documentation wishes to share whether or not they have line-in, etc. in the playback mixer, it could be useful.
-Dave
?[email protected]

How to make the lines of the table and the template same

Hello Abapers,
I have a requirement, I have made a table in which i have displayed all the values in it, and under that i have taken a template and diplayed the total of it but the lines drawn to the table and the template is different, the table line is dark and the line of the template is lite, how can i make the line of the template dark, i mean the same as the table line. i hope u understand my problem.can u please help me in solving my problem as the requirement is very urgent.
HOPE U UNDERSTAND MY PROBLEM
Thank u in advance .

HI,
Adjust the line width option for template and table,its there under pattern.

How to make a line with arrow curve around a circle?

I've got CS6 and Windows 7. Trying to make a line with an arrow on one end curve around a circle. Actually want it to have a 3D look like it was curving around the back side of a globe. How do you do this? Thanks.

Perhaps you mean something more like this
similar technique you create the arrow as a straight stroke path with an arrowhead and make it a symbol
You then make it a symbol
you than make a vertical rectangle and use the 3D Revolve Effect to make a cylinder
then you go to map art
then you choose in the map art to make the geomtery invisible
then you ma the arrow symbol and adjust the placement and then adjust the rotation of the cylinder to your likeing.
If you need a video to follow I'll do one later.

How to make a line intersect with a path at random angles?

How do you make a line intersect with the anchor point of a half circle when you want the line to continue on past the anchor point of the half circle at a random angle?

Howdy.
Try this:
Lock the semicircle. With the pen tool, draw a line from the point of origin to the anchor point of the semicircle. It will still snap even though it's locked.
Now, we use Jet's scale idea. Select the Scale Tool (S). Click on the point of origin to position the reference point. It will snap. Now, while holding down the Shift Key, drag right and down. The line segment will stay snapped to the endpoint while you drag (highlighted). You can drag it as far as you want.
That's it.
Peace,
Lee
PS: It's pretty much all Jet's method with the benefit of the OP's screenshot of what he was trying to accomplish. Jet offered the best answer, it looks like to me.

How to make my addon appear on the menuitem list on sap b1 startup?

Hi,
I developed a sample "ui addon" that is supposed to create a new menuitem and display a form when clicked.
I was able to install it using the b1de installation wizard and everything appears to be working...
The problem:
After installing the addon, the only way for it to start is to set the "Default Group", in the "Add-on Admnistration window", to "manual" and than go to the "Add-on Manager" select it from the list and hit "Start" to make it run. The problem is that i have to do this everytime i want the addon to run and what i wanted to know is how to make it start automatically everytime i start sap b1.
I already tried setting the default group to automatic, but sap changes it to manual in the Add-on Manager. Am i doing something wrong?
Thank you for your time,
Patricia

HI Patricia,
The the user settings, and set the at the user settings to automatic.
The best way is mandatory, if you have any required functionality inside. (this can be set at ard file generation using the Mandatory check box).
Regards,
J.

How to make cursor lines appear in saved file

Similar Messages

Maybe you are looking for