How do you make a line appear to draw itself?

I want to make a border appear to be "drawing itself" around
a rounded rectangle on my site, how would I go about doing it? I'm
sure it's easy but for the life of me I can't figure it out. Also,
I want to have an X appear to draw itself on the site to cross out
some text, how would I do this? (the X I want to use is a graphic,
not a vector graphic).
Thanks big time!

xslamx wrote:
> I want to make a border appear to be "drawing itself"
around a rounded
> rectangle on my site, how would I go about doing it? I'm
sure it's easy but
> for the life of me I can't figure it out. Also, I want
to have an X appear to
> draw itself on the site to cross out some text, how
would I do this? (the X I
> want to use is a graphic, not a vector graphic).
http://www.mudbubble.com/db_tutorials/db_tut_write2.html
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

How do you make an image appear by clicking on a link?

I have a div set up as a box for my images.
Underneath I have put a several divs, each of which have numbers in them...01.....02....03....04
I would like to know how to make it so that when you click on 01, an image appears in the box, when you click on 02, the other image disappears and then new image appears, click on three....etc....etc
What's the best way to go about this?
Thanks

This isn't quite what you've described but you could alter it so it works.
On the div give it an attribute class="rollover"
Then in the stylesheet
.rollover {
display:inline-block;
cursor:default;
.rollover:hover img {visibility:hidden;}
A way you could alter this is to nest a div inside (over the top of your image) that has a solid fill (background-color) and on the rollover:hover
get rid of the background or hide the div....
Hope you follow... I've not really spent time explaining this in detail, presuming you've some knowledge.
(I so hate how the i beam doesn't show in Adobe's topic reply widget.. or intermittently... it's appeared again... Firefox.)

How can I make a line appear on each page in exactly the same position?

Hello,
I have created a simple line at the top and bottom of my page that I would like to be replicated on every other page in the document.
Is there anyway in which I can make it recognise that I want these two lines to be used on every single page?
Thanks,
Matt

Select the lines > Format menu > Advanced > Move Object to Section Master

Baseline grid? How do you make type line up across facing pages?

I'm laying out a book in Pages, and I have it set up as 12.5-point type on 15-point line spacing, exactly. The margin at the top and bottom of both pages is 0.9 inches. There is a header and a footer set on each page at 0.4 inches. But occasionally, one page will have 32 lines of body type on it, and the facing page will have 31 lines. No change in type size or leading on either page.
When I saw in the Pages user manual that you could specify the line spacing "exactly," I thought that was the solution. But still, occasionally, I will get two facing pages do not line up exactly, one still has 32 lines and the other 31.
I thought, hmm, what if I change the leading to 14.9-point on the 31-line page just to see what happens. Weirdly enough, the spacing does tighten up, way more than enough to fit that 32nd line onto the page, but the type does not flow back in from the next page. It just leaves a bigger space there than before, and still 31 lines. I'm stumped.
Is there any kind of baseline grid feature in Pages that might cure this? I didn't see anything like that in the user manual, but could there be some kind of equivalent, or a workaround? (Well, besides using Quark or InDesign?) It would look so much better if it didn't have the occasional blank line at the bottom of a page.
Thanks for any advice.

Thanks much, Walt and Peter, you were both right. I rethought my whole document layout, starting with the idea that I would put every line of 12-point body type on a 14-point slug. So I made the page length a multiple of 14-point lines. I also had some 16-point chapter titles that I formatted to be on 28-point slugs. I was not consistent enough in my chapter headline formatting before. And I tweaked my top and bottom margins so the length of the type area on the page would accommodate 37 lines of type. Once I had this setup, I was confident it would work. It did. For a while. Then I ran into a page that had only 36 lines, not 37. Hmmm. Yes, that's where unchecking the "prevent widow and orphan lines" box paid off. It allowed a line to flow back from the next page and fill in the 37th slug.
It doesn't have the elegance of setting up a baseline grid and locking the type to it, but it works. Thanks again for your assistance, guys.

How can you make FMS 4.5 stop limiting itself to 20-25 Mbps of bandwidth?

I'm working on an upgrade to an ActionScript 3.0 website, and this upgrade multiplies the number of RTMP connections that are liable to be used at one time for streaming live video and audio (sometimes uploading, but more often downloading). Well, we pretty quickly hit some sort of limit with the performance where, even with a modest number of such connections, latency becomes a very serious issue.
The server's computer's CPU and memory usage isn't going off the deep end, and the FMS server's CPU and memory usage isn't going off the deep end. They don't even seem to be affected that much by this. However in the admin console for the FMS server, it quickly becomes evident it's a bandwidth problem of sorts.
What's strange though is that for a little while, if I keep just adding new connections, the bandwidth usage goes up fairly linearly. Then it peaks. Once it gets to about 20-25 Mbps, it won't go any further.
I've looked around for a way to configure this limit to be a lot higher than it currently is. I haven't been able to find anything. The closest I've come is with the BandwidthCap tags in Application.xml, but those don't really apply; they're just capping the bandwidth for individual connections.
Is there not some way for me to raise the bandwidth limit for the overall server so that we could have a halfway decent number of simultaneous video streaming connections? We are running the FMS server on a computer that meets only about half of the minimum memory requirements, and I am aware that this may be the only real problem here. However I need to know whether this is true before I tell my boss that we need more memory. If there is a chance this is just configurable or something, I need to try that first. If it's basically of a computer resources issue due to not meeting the minimum requirements, I need a way to explain that that's exactly what the problem is. Thanks!
By the way I didn't find a forum specifically for FMS or anything, so I'm not sure if this is the right place for this post.

I'm working on an upgrade to an ActionScript 3.0 website, and this upgrade multiplies the number of RTMP connections that are liable to be used at one time for streaming live video and audio (sometimes uploading, but more often downloading). Well, we pretty quickly hit some sort of limit with the performance where, even with a modest number of such connections, latency becomes a very serious issue.
The server's computer's CPU and memory usage isn't going off the deep end, and the FMS server's CPU and memory usage isn't going off the deep end. They don't even seem to be affected that much by this. However in the admin console for the FMS server, it quickly becomes evident it's a bandwidth problem of sorts.
What's strange though is that for a little while, if I keep just adding new connections, the bandwidth usage goes up fairly linearly. Then it peaks. Once it gets to about 20-25 Mbps, it won't go any further.
I've looked around for a way to configure this limit to be a lot higher than it currently is. I haven't been able to find anything. The closest I've come is with the BandwidthCap tags in Application.xml, but those don't really apply; they're just capping the bandwidth for individual connections.
Is there not some way for me to raise the bandwidth limit for the overall server so that we could have a halfway decent number of simultaneous video streaming connections? We are running the FMS server on a computer that meets only about half of the minimum memory requirements, and I am aware that this may be the only real problem here. However I need to know whether this is true before I tell my boss that we need more memory. If there is a chance this is just configurable or something, I need to try that first. If it's basically of a computer resources issue due to not meeting the minimum requirements, I need a way to explain that that's exactly what the problem is. Thanks!
By the way I didn't find a forum specifically for FMS or anything, so I'm not sure if this is the right place for this post.

How you make recend uploads appear in the recently added folder

When adding to itunes library, how do you make the selections appear in the recently added folder. The folder was deleted but rebuilt.

It is a mixed playlist and finally I came up with an answer; it might sound strange but I woke up from a nap with all correct settings figured out.
This is what I did:
I had to specify a subset for every podcast or I would end up with every episode available on my library which in turn would reach the limit I set but that's OK. I noticed though, that podcast won't sync to iTunes Match, which is a bummer, but still they sync over Wi-Fi. This is what I got finally:
Thanks for all your help!

How do you make an image or text, appear on every slide?

How do you make an image appear on every slide?

What part did you not understand?
As Andrew said, open the Keynote file, go to the View Menu>Show Master Slides
This is what you should see on the left hand slide of the window. The Master slides are at the top and the check mark goes by the Master Slide that is referenced on which ever slide you have selected in the Slides pane.
Add to the Master slide the image or text that you would like to see on the slides that are made off of that master. You can see in the Title & Bullets master slide, I added the shape in the lower left hand corner and it was added to all the slides build off that master.
If this still isn't clear, let us know where you are getting stuck and we will try to help.

How can I make a line at 40 degree angle in Keynote 6

How can you make a line of 40 degrees (or anywhere between 40 to 45) angle in the new Keynote 6.2.2. It seems they took away that nice feature from the previous version. When I move one end of a line, it locks onto 45 when I get near that angle, and jumps off directly to 34 when I try to move away. Previously you could click on a line to transform the ends into red spots, and move them independently to any angle or length. Now it locks onto 45, or 135 or 90 etc. I don't have any of the guides on or any other feature. This is supposed to happen only when holding shift key (which is also a great feature). If it locks onto the magic angles without holding shift, then there is no sense if having that feature at all.

Press the command key when dragging, this switches off snapping and allows continuous placement.
If you like numerical control: Inspector > Format > Arrange > Rotate

How do you make the sentences you input in a drop down list wrap to the next line?

How do you make the sentences that you input in a drop down list to wrap to the next line?

You can't.
see this thread for more info: Can you set drop down list as multi-line???

TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones a

Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones appear?

only way is to restore the phone as new. OR wait until IOS 7 comes out in the fall.

How do you make a 2D line form the outline of a circle.

How do you make a 2D line form the outline of a circle. I want a line to come in from the side of the screen and bend round to form the outline of a circle. In flash pro cc?

you can use one tween to move your line from the side of the screen, then another (shape) tween to bend it into a circle. you will probably need to use shape hints for the 2nd tween.

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?

Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn

How do you make superscripts and mathematics in Preview's text annotation?

When adding text annotations that include scientific notations, how do you make superscripts, e.g. "3.2 × 10^{-23}"?
Searching Help for 'superscript' turns up nothing, suggesting the command does not exist, as it does under Baseline etc. in iWork. Please tell me this is not the case! If it is, has the situation been improved in the new operating system?
A related issue: I wish to include other mathematics -- is there a way to include mathematics similar to LaTeX? Might Preview incorporate using latex code in the future, so I can easily type "\exp{-\lambda t}" etc and have the math appear?
I'm adding text annotations to PDF lecture notes in Preview, basically filling in blanks the instructor has left so students will pay attention in class, and these annotations include superscripts; I wish to format properly.
Thank you!

Once you have the circle shape displayed, long press on the border of the circle. Once it is highlighted, drag horizontally or vertically. This should allow you to distort the circle into an ellipse (or the square into a rectangle).
Hope that helps,
Frank
Sketch Engineering

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do you make a 3d octagon in photoshop cs4 extended?

How do you make a 3d octagon in photoshop cs4 extended that you can map artwork to? I've been searched online for a solution that doesn't involve using a 3D program but can't find anything. Can't you extrude a shape like in Illustrator, or exporta true 3D shape from Illustrator that will work? I'd use Illustrator but the mapping thing is finicky, and doesn't alow wrapping images around angles. (now someones going to say: "Don't mention any other programs in a PHotoshop forum!" Yeah yeah, there should be a forum then about using different Adobe programs together.) End of rant, any suggestions much appreciated.
Thanks,
Mike

Thanks for your prompt response!
Suggested Bridge Update
It turns out that I got a message that this update had already been installed, which led me to more carefully look at the Bridge window and (finally) see that the Output module had a Quality dropdown: Full, 300 ppi, 150 ppi, 96 ppi and 72 ppi. Thanks! I decided to compare the CS4/Bridge results to those I got in CS2 with its convenient File/Automate/PDF Presentation/Multi-Page Document routine that I like.
My project was an 8-page PDF made from scanned pages of handwritten notes into which some fairly small type had been insert using the Photoshop CS2 Type tool. In Photoshop CS2, I had settled on "medium quality" JPEG compression as giving a "reasonable" file size (about 7 MB) and "very good/excellent" image quality. I experimented with making the PDF in Bridge, using all five Quality levels. See table below. The Bridge "good minus" file was about the same size as the file produced in CS2, which I judged to be "very good/excellent" and slightly better visually than the 300-ppi, 23.5-MB Bridge file.
Bridge Quality:
Full
300 ppi
150 ppi
96 ppi
72 ppi
File Size:
25.2 MB
23.5 MB
7.6 MB
3.2 MB
2.1 MB
Subjective Quality:
Very good
Very good
Good minus
Poor
Useless
I appreciate that you may not be all that interested in these observations, but it seems to me that Adobe has done us no favors in the multi-page PDF department in going from CS2 to CS4!
Install the Old Contact Sheet/Picture Package Plug-Ins
I had already done this some time ago, in order to get in CS4 the File/Automate/Contact Sheet II feature I liked in CS2. It does not appear to me that this plug-in has anything to do with make multi-page PDF's. Perhaps I'm missing something.
Again, thanks for your response!

How do you make a line appear to draw itself?

Similar Messages

Maybe you are looking for