How to make footnotes/endnotes in Turabian format?

I am trying to finish my final essay paper for my history class and I am finding it a little difficult to change my Footnotes/endnotes in Turabian format. I have tried looking on the inspector as where most changes are made for an essay, but I can not seem to get the specific format that I am looking for. If anyone has an idea of how I may be able to utilize pages to change the format to turabian that would be awesome. Any help is certainly appreciated. Thank you.

The footnotes/endonotes numbers at the bottom or end of the essay/report are to be in full size numbers and they are indented.
http://www.uvu.edu/owl/infor/pdf/style_guides/Turabian.pdf

Similar Messages

How to make sure what material number format is the same in SRM and R/3?

Hi all!
I faced the following problem:
"Product does not exist in plant or it has been flagged for deletion". This error message occurs during shopping cart creation or during transferring purchase requisition from R/3 to SRM. It seems like SRM carries out some material checking in R/3 before shopping cart save and can't find out appropriate R/3 material. The only reason I can assume is different material number formats in SRM and R/3. Material number length is the same in both systems.
Thanks in advance,
Alexander.

Alex-
We experienced this problem just recently. Our situation involved trying to add a material to the cart from an internal catalog (CCM). As mentioned earlier their is a configuration setting to indicate the number of characters the "Product" (SRM terminolgoy) or "Material" (R/3 terminology) should be. We made our setting 18 characters (same length as field in R/3). The important thing to understand is that the material number is actually defined as a character field, not a numerical field so the length of the material "number" is critical for the system to accurately check the material. Do the following and see if you correct the error.
1) Go into transaction COMMPR01 in SRM, select the search tab and choose Material in the Find box, then click start. Choose the material you are experiencing the problem on and verify that the number of characters is the same in SRM as it is in R/3.
2) Next, go into R/3 and look at table entries in MARC for the material. This will show you all the different plants associated with the material.
3) Finally, create a cart and procure the material. If you get the error message go to the basic data of the cart and verify the location (plant) is one of the plants you found in step 2. If not, change the location to one from step 2 and check the cart.

How do I add footnotes/endnotes in Pages for iPad 2?

Hi everyone. Like many people I was super excited to be able to use my iPad 2 as a word processor with the Pages app. I have a macbook black from 2007 and it is extremely heavy to carry around everyone. I'm a graduate student so mobility for me is key. Anyway, so I am writing an academic paper write now in Pages for iOS but I can't figure out how to add footnotes/endnotes to cite my sources. I can't find anything online relating to this topic. Can you tell me how to do this? I certainly hope Pages has this capability because without something so fundamental, how can it be the least bit useful? Thanks so much!

It is not built in, but you can at least create and edit footnotes (I do not use end notes, but from limited testing, it appears to work with endnotes as well but converts them to footnotes). It sounds complicated when you break it down into steps as I do below, but it really is easy and intuitive.
FIRST: The underlying concept. If you have the latest Pages for iPad, then when it imports a Word document it imports footnotes (and endnotes) and you can edit them.
With that in mind, here is how you can create footnotes on the iPad.
#1 In Word create a one short sentence shell text with a short footnote, like "See the cat run /fn1" "fn/1 The cat was black").
#2 Import that shell document into your iPad, say with email "open using Pages."
#3 Save that shell document as your sour dough starter so to speak.
#4 Now create your new Pages iPad document.
#5 When you are ready to create your FIRST new footnote, copy and paste the shell sentence with shell footnote from your saved starter shell document into your new iPages document.
#5. Edit the shell sentence and footnote to a real sentence and footnote in new document.
#6 Thereafter, as you add new footnotes, either copy / paste one from new document or shell and edit. You will see they renumber properly, even when moved.

How do i make a presentation in portrait format?

Im trying to create a flyer and cant figure out how to make a slide in portrait format.

Welcome to the forums!
Is there a reason you are making a flyer in Keynote rather than Pages? Pages is much better suited for that kind of task.
That said, if you want to change the orientation of a presentation, in the Document Inspector change the Slide Size to whatever custom size you want.

How to make tiny numbers for footnotes in pages?

I cant figure out how to make the number small in pages on my Ipad 2. The app is up to date and aswell is the software, iOS 5.1 but I can't figure out how to make the number tiny and move up to the left hand corn of the letter. Example, the number should like like the '2' in h2o but I don't know how, please help.

Hi vnessar
When you place the insertion point where you want your footnote referenced (tap, hold, release) and select Insert > Footnote, it automatically places the superscript number for your footnote there and takes you to the bottom of the page in a Footnote field with the reference number already filled in.
If you add another, (tap, hold, release - which brings up the "Select | Select All | Paste | Insert" menu) it will become Footnote 2 and so on.
See Insert footnotes or endnotes
In step 2. Tap >, tap Insert, and then tap Footnote. The triangle is the "more button". Just ignore that and tap Insert and Footnote.
Does that work for you?
ivan

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How to make a slide show or edition including mpeg and other formats

Hi,
I am i bit puzzled by the use of iphoto/imovie/itunes.
I have a Sony camera which generates jpg photos and mpg videos; besides, i have 3gp and mp4 videos from cell phones.
Firstly, i imported all of them to iphoto. I used a automator workflow to help importing from hotsynced Palm centro files, to discover the first problem with the 3gp files: they could not be iported by workflows.
Still, they could be seen in iphoto, but then i tried to make a slide show. My idea was to put the photos and videos of a certain event to be watched together, or at least to be able to watch the videos in a sequence, without having to click on each one.
I didnt get it in iphoto, so i switched to imovie. it was even worse, since it cannot import the mpgs and the 3gps (the jpg photos were ok). What could i do about that? is there any converter or other way?
then i tried the itunes, and it was the opposite: it imported and played in sequence the mpg videos, but not the photos. This is a workaround anyway, since the program expects to play movies, and makes my daughter a "star", but that`s ok, she is one to me.
i'll be thankful for hints on how to make the imovie compatible with the 3gp and mpgs, or finding some way to do this edition in iphoto or even with itunes.
regards

I see, it sounds reasonable , i think i will buy the pro and try.
QT Pro ($30) and MPEG Streamclip (free) complement each other. In many cases one can do things that the other cannot. For instance, MPEG Stramclip can handle/edit multiplexed formats while QT Pro cannot. QT Pro allows layering of data tracks while Streamclip does not. Streamclip merges file streams more easily than QT Pro but QT Pro allows the "Movie to MPEG-4" export to "passthrough" the video while Streamsclip does not. And so on and so forth...
I was referring to the mpegs from the Sony camera, of which a have hundreds, shot in the last 3 or 4 years, mainly from my 5-year old daughter. Is the above true to these?
That still doesn't help. By "sony camera," are you referring to a still digital camera (multiplexed MPEG-1) or a Sony video camcorder taking MPEG-4/AVCHD with AC3 audio in an MPEG wrapper, a Sony DVD/HDD camera storing some kind of MPEG-2/AC3 files. On a Mac, the extension MPG normally refers multiplexed MPEG-1 (or MPEG-1 audio layer) files while MPEG normally refers to multiplexed MPEG-2 video content with MPEG-1, layer 2 audio (MPEG2/MP2) but may also refer to files with MP3 or AC3 files in an MPEG, VOB, or TS wrapper. In addition it may loosely refer to elementary M2V video streams (M2V video file paired with a separate AIFF or AC3 file), a standard MPEG4/AAC file (in an MOV or MP4 wrapper) or a standard H.264/AAC file in MOV, MP4, or M4V wrapper). Since the handling, conversion, editing requirements vary with each type of file, it becomes important to what specific kind of content/file container we are dealing with here.

How to make Address Book obey Preferences? I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8 Address Book 5.0.3 (883) Preferences set at ... General First name following Last name Sort for Last name Address Format Canada Font size Large Phone format set a

How to make Address Book obey Preferences?
I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8
Address Book 5.0.3 (883)
Preferences set at ...
General
First name following Last name
Sort for Last name
Address Format Canada
Font size Large
Phone format set at
+1.123.456.7890
When application quits - it's all forgotten and it self-resets to
unwanted configuration.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

How do you make footnotes in ibooks author

I have not been able to make footnotes nor does iBook import the footnote format from Word. This is frustrating since the software (iBooks) is intended for the creation of textbooks which contain many footnotes.

IBA doesn't support footnotes. The next-best thing would be to use numerical superscript references that you make hyperlinks to the notes. You should be able to select superscript as a character style in the font palette. Alternatively, use "[1]" as the footnote style and make the entire thing a hyperlink (including the angle brackets). This creates a larger target for tapping.
Be aware that, even if you do this, it will still be clumsy for the reader because iBooks does not have a "back" button. Once the reader follows a hyperlink, there is no way to easily get back to where the reader came from. For this reason, it's probably best to avoid internal hyperlinks and only use external ones (to web pages), because these links open in Safari, so the reader does not lose context.
Michi.

How to make the date format in ipod the same as in itunes?

When I look at my podcasts in itunes, the dates come up as dd/mm/yyyy (which is correct), however, when I look at my podcasts on the ipod, the date comes up as mm/dd, which is very confusing.
I cannot figure out how to make it so that the date format is the same.

When I look at my podcasts in itunes, the dates come up as dd/mm/yyyy (which is correct), however, when I look at my podcasts on the ipod, the date comes up as mm/dd, which is very confusing.
I cannot figure out how to make it so that the date format is the same.

Hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks

The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
Sorry, I can't be of more help.

Ipod Classic 120g - How to make it work again? Was formatted by windows.

My ipod classic shows as "removable device" in the finder, but does not appear on itunes. The iPod was formatted as a mobile device on windows. How to make it work again?

Hello soraiaSP
Try putting your iPod classic into Disk Mode and then use iTunes to restore it. Then it should show up within iTunes to sync media across to it.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
Regards,
-Norm G.

How to make table format

Hi,
Im not expert in Oracle Database especially in querying of data's
My problem is about to be honest i have no idea how to make table format.
We have a problem in our production instance we raised it in Oracle Support but one of the technical support there is asking about this
"I want table data of the corresponding batch. Please take help of you DBA and ensure that you are connected to the correct instance, where you have this issue."
I am only one DBA here in our company and Im still Newbie.
here is the scripts the he want me to run it
select batch_id from gme_batch_header bh, mtl_parameters mp
where batch_no = '115982'
and organization_code = '101'
and bh.organization_id = mp.organization_id;
select *
FROM gme_batch_header
WHERE batch_id in (XXXXXX);
select batch_id, line_type, material_detail_id, inventory_item_id, plan_qty, actual_qty, wip_plan_qty, dtl_um, release_type, phantom_id,
locator_id, material_requirement_date, move_order_line_id, original_primary_qty, subinventory
FROM gme_material_details
WHERE batch_id IN (XXXXXX)
ORDER BY batch_id, line_type, material_detail_id;
SELECT 'MMT' as table_name, t.transaction_id as trans_or_rsrv_id, ty.transaction_type_name, h.batch_status, d.batch_id as batch_id, t.transaction_source_id as trans_or_rsrv_source_id, d.line_type, t.trx_source_line_id as material_detail_id,
t.organization_id, pa.organization_code, t.inventory_item_id, i.segment1 as item_number, t.subinventory_code, t.locator_id, lt.lot_number as lot_number, t.primary_quantity, t.transaction_quantity as trans_or_rsrv_qty, lt.transaction_quantity as lot_qty, t.transaction_uom as trans_or_rsrv_uom, t.secondary_transaction_quantity as sec_qty, t.secondary_uom_code,
to_char(t.transaction_date, 'DD-MON-YYYY HH24:MI:SS') as trans_or_rsrv_date, t.LPN_ID, t.TRANSFER_LPN_ID, t.transaction_mode, NULL as lock_flag, NULL as process_flag
FROM mtl_material_transactions t, gme_material_details d, gme_batch_header h, mtl_transaction_lot_numbers lt,
mtl_lot_numbers lot, mtl_system_items_b i, mtl_transaction_types ty, mtl_parameters pa
WHERE t.transaction_source_type_id = 5
AND h.batch_id in (XXXXXX)
AND t.transaction_source_id = h.batch_id
AND t.organization_id = h.organization_id
AND d.batch_id = h.batch_id
AND d.material_detail_id = t.trx_source_line_id
AND lt.transaction_id(+) = t.transaction_id -- This join allows us to get the lot number
AND lot.lot_number(+) = lt.lot_number -- This join allows us to get lot specific info if needed.
AND lot.organization_id(+) = lt.organization_id
AND lot.inventory_item_id(+) = lt.inventory_item_id
AND t.organization_id = i.organization_id
AND t.inventory_item_id = i.inventory_item_id
AND t.transaction_type_id = ty.transaction_type_id
And t.organization_id = pa.organization_id
UNION ALL
SELECT 'RSRV' as table_name, reservation_id as trans_or_rsrv_id , NULL, h.batch_status, d.batch_id as batch_id,
demand_source_header_id as trans_or_rsrv_source_id, d.line_type, demand_source_line_id as material_detail_id,
r.organization_id, pa.organization_code, r.inventory_item_id, i.segment1 as item_number, r.subinventory_code, r.locator_id, r.lot_number,primary_reservation_quantity, reservation_quantity as trans_or_rsrv_qty, NULL,reservation_uom_code as trans_or_rsrv_uom, secondary_reservation_quantity as sec_qty, r.secondary_uom_code,
to_char(requirement_date, 'DD-MON-YYYY HH24:MI:SS') as trans_or_rsrv_date, LPN_ID, NULL, NULL, NULL, NULL
FROM mtl_reservations r, gme_material_details d, gme_batch_header h, mtl_system_items_b i, mtl_parameters pa
WHERE demand_source_type_id = 5
AND h.batch_id in (XXXXXX)
AND demand_source_header_id = h.batch_id
AND r.organization_id = h.organization_id
AND d.batch_id = h.batch_id
AND d.material_detail_id = demand_source_line_id
AND r.organization_id = i.organization_id
AND r.inventory_item_id = i.inventory_item_id
And r.organization_id = pa.organization_id
UNION ALL
SELECT 'PPL' as table_name, pending_product_lot_id as trans_or_rsrv_id, NULL, h.batch_status, d.batch_id as batch_id, NULL, d.line_type, d.material_detail_id, h.organization_id, pa.organization_code, d.inventory_item_id, i.segment1 as item_number, NULL, NULL, lot_number, NULL, quantity as trans_or_rsrv_qty, NULL, NULL, secondary_quantity as sec_qty, NULL, NULL, NULL, NULL, NULL, NULL, NULL
FROM gme_pending_product_lots p, gme_material_details d, gme_batch_header h, mtl_system_items_b i, mtl_parameters pa
WHERE h.batch_id in (XXXXXX)
AND p.batch_id = h.batch_id
AND d.batch_id = h.batch_id
AND d.material_detail_id = p.material_detail_id
AND h.organization_id = i.organization_id
AND d.inventory_item_id = i.inventory_item_id
And h.organization_id = pa.organization_id
UNION ALL
-- Note that there should not be any transactions in MMTT. If there are, they are usually "stuck" there and
-- need to be processed or deleted
SELECT 'MMTT' as table_name, t.TRANSACTION_TEMP_ID as trans_or_rsrv_id, ty.transaction_type_name, h.batch_status, d.batch_id as batch_id, t.transaction_source_id as trans_or_rsrv_source_id, d.line_type, t.trx_source_line_id as material_detail_id, t.organization_id, pa.organization_code, t.inventory_item_id, i.segment1 as item_number, t.subinventory_code, t.locator_id, lt.lot_number as lot_number, t.primary_quantity, t.transaction_quantity as trans_or_rsrv_qty, lt.transaction_quantity as lot_qty, t.transaction_uom as trans_or_rsrv_uom, t.secondary_transaction_quantity as sec_qty, t.secondary_uom_code, to_char(t.transaction_date, 'DD-MON-YYYY HH24:MI:SS') as trans_or_rsrv_date,t.LPN_ID, t.TRANSFER_LPN_ID, t.transaction_mode, t.lock_flag, t.process_flag
FROM mtl_material_transactions_temp t, gme_material_details d, gme_batch_header h,
mtl_transaction_lots_temp lt, mtl_system_items_b i, mtl_transaction_types ty, mtl_parameters pa --mtl_lot_numbers lot
WHERE t.transaction_source_type_id = 5
AND h.batch_id in (XXXXXX)
AND transaction_source_id = h.batch_id
AND t.organization_id = h.organization_id
AND d.batch_id = h.batch_id
AND d.material_detail_id = trx_source_line_id
AND lt.TRANSACTION_TEMP_ID (+) = t.TRANSACTION_TEMP_ID -- This join allows us to get the lot number
--AND lot.lot_number(+) = lt.lot_number
--AND t.organization_id = lot.organization_id
AND t.organization_id = i.organization_id
AND t.inventory_item_id = i.inventory_item_id
AND t.transaction_type_id = ty.transaction_type_id
And t.organization_id = pa.organization_id
UNION ALL
SELECT 'MTI' as table_name, t.TRANSACTION_INTERFACE_ID as trans_or_rsrv_id, ty.transaction_type_name, h.batch_status, d.batch_id as batch_id, t.transaction_source_id as trans_or_rsrv_source_id, d.line_type, t.trx_source_line_id as material_detail_id, t.organization_id, pa.organization_code, t.inventory_item_id, i.segment1 as item_number, t.subinventory_code, t.locator_id, lt.lot_number as lot_number, t.primary_quantity, t.transaction_quantity as trans_or_rsrv_qty, lt.transaction_quantity as lot_qty, t.transaction_uom as trans_or_rsrv_uom, t.secondary_transaction_quantity as sec_qty, t.secondary_uom_code, to_char(t.transaction_date, 'DD-MON-YYYY HH24:MI:SS') as trans_or_rsrv_date, t.LPN_ID, t.TRANSFER_LPN_ID, t.transaction_mode, to_char(t.lock_flag), to_char(t.process_flag)
FROM mtl_transactions_interface t, gme_material_details d, gme_batch_header h,
mtl_transaction_lots_interface lt, mtl_system_items_b i, mtl_transaction_types ty, mtl_parameters pa --mtl_lot_numbers lot
WHERE t.transaction_source_type_id = 5
AND h.batch_id in (XXXXXX)
AND transaction_source_id = h.batch_id
AND t.organization_id = h.organization_id
AND d.batch_id = h.batch_id
AND d.material_detail_id = trx_source_line_id
AND lt.TRANSACTION_INTERFACE_ID (+) = t.TRANSACTION_INTERFACE_ID -- This join allows us to get the lot number
--AND lot.lot_number(+) = lt.lot_number
--AND t.organization_id = lot.organization_id
AND t.organization_id = i.organization_id
AND t.inventory_item_id = i.inventory_item_id
AND t.transaction_type_id = ty.transaction_type_id
And t.organization_id = pa.organization_id
ORDER BY batch_id, table_name, line_type, material_detail_id;
SELECT *
FROM gme_transaction_pairs
WHERE batch_id in (XXXXXX);
I used SQL Developer and connected in our Production instance where the problem is there
so i run it please see attached file:
please help how to make table format outpur what are the steps that i need to produce correctly.

Hi,
From your post, it seems that you need to upload the results of the query to Oracle Support.
You can spool the output to a file and upload it.
Something like...
SQL>spool output.txt
SQL>set lines 200
SQL>set pages 200
--execute the queries
SQL>spool off
I don't know about SQL Developer but tools such as PL/SQL Developer and Toad will allow you to export the query results directly to MS Excel.
Regards,
Sujoy

How to align footnotes vertically to each other ?

In IDCS5 I want to align two footnotes so it begins at the same height point.
Thanks

Ah yes - you cannot get Footnotes to Span Columns - it's very frustrating and I'v been campaigning for this feature since CS2
Please join the cause http://forums.adobe.com/message/2744922#2744922
For now you will have to make them endnotes and manually sit them across two columns.
Here's a script that converts indesign footnotes to endnotes (as InDesign can't do that either - http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1345518)
How to install and use scripts http://indesignsecrets.com/how-to-install-scripts-in-indesign.php
After you've created endnotes - you will have to cut them from the main text frame.
Then you make a new frame and manually place the text frames at the end of the appropriate pages.
It's very annoying.

How to make footnotes/endnotes in Turabian format?

Similar Messages

Maybe you are looking for