How to make picture change????

My question is that I have a place where I want to put a picture on my webpage. I know how to do that but what if I want the picture to change to a different picture periodically. I have seen this on some pages where when you come back to the webpage after say 5 minutes, there is a different picture in the same location where the previous picture was. I have about 20 photos that I want to rotate on my webpage and have yet to figure out how to get this to work. Please, any help would be greatly appreciated.
Derrick

I think I may have found one to work but it is not quite giving me the output that I need. The code is as follows but it seems to only rotate through 2 of my photos.
              <script language="JavaScript">
// Copyright 1996, Infohiway, Inc. (http://www.infohiway.com)
// Courtesy of SimplytheBest.net - http://simplythebest.net/scripts/
<!--
function adArray() {
for (i=0; i*2<adArray.arguments.length; i++) {
  this[i] = new Object();
  this[i].src = adArray.arguments[i*2];
  this[i].href = adArray.arguments[i*2+1];
this.length = i;
function getAdNum() {
dat = new Date();
dat = (dat.getTime()+"").charAt(8);
if (dat.length == 1)
  ad_num = dat%ads.length;
else
  ad_num = 0;
return ad_num;
var ads = new adArray(
"rv4_images/12 Feb 10/logo1.JPG",
"rv4_images/12 Feb 10/logo2.JPG",
"rv4_images/12 Feb 10/logo3.JPG",
"rv4_images/12 Feb 10/logo4.JPG",
"images/banner_3.gif","http://simplythebest.net/scripts/");
var ad_num = getAdNum();
document.write('<CENTER><TABLE CELLPADDING=0 CELLSPACING=1 BORDER=0><TR><TD '
+'ALIGN=CENTER><FONT SIZE=2 FACE=Arial><B>SimplytheBest DHTML Scripts & JavaScripts is sponsored by: '
+'</FONT></TD><TR></TR><TD><A HREF="'+ads[ad_num].href+'"><IMG SRC="'+ads[ad_num].src+'" '
+'WIDTH="150" HEIGHT="100" BORDER=0 name=js_ad></A></TD></TR></TABLE></CENTER>');
link_num = document.links.length-1;
function rotateSponsor() {
if (document.images) {
  ad_num = (ad_num+1)%ads.length;
  document.js_ad.src = ads[ad_num].src;
  document.links[link_num].href = ads[ad_num].href;
  setTimeout("rotateSponsor()",5000);
setTimeout("rotateSponsor()",5000);

Similar Messages

  • How to make picture in picture video semi transparent?

    I do know how to make picture in picture semi transparent if I import a photo instead of a video. However, if I import an video and want that video to be semi transparent at the right top cornor, I can do so with imovie? I know I can make the second video semi transparent if I use cutaway instead of picture in picture. However, I do not want the second video fill the whole screen, just the right cornor of the whole video.
    Please reply if you know how to do it in imovie. Thank you

    renaixbf wrote:
    ...  video to be semi transparent at the right top cornor, …  I can make the second video semi transparent if I use cutaway ...  I do not want the second video fill the whole screen, just the right cornor of the whole video.
    your wording confuses me ... what exactly do you want to accomplish:
    a cut-away replaces video, but keeps audio - that has nothing to do with 'transparency' (??)
    for sure, you can place and resize a PiP anywhere on the screen (pic#1)
    or, do you mean by 'semi-transparent' keying a PiP? (pic#2) A color-key within a PiP is not optional in iMovie; although, I tested it: if your source video contains 'alpha transparency', iMovie support that either.
    https://sites.google.com/site/karstenschluter/im09-counter
    or, do you want to manually change the compositing mode (pic#3)? That, indeed is not optional in iMovie.
    or, did you mean by 'just a part' cropping a PiP/second layer (pic#4)? Again, not optional in iMovie, complex compositing effects are habitat of professional tools such as FCPX.

  • How to make Attribute Change run alignment & Hierarchy changes in Aggregat

    Hello
    I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
    I posted previously the same question but there were not good answers and i was not able to understand clearly .....
    If there is Process chain XXY which makes Attribute change run for Master Data 0SPELLING ?
    Now there is Aggregate TRT which includes :
    0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
    Now pls answer following question ?
    1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING , Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ? YES or NO
    2) If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY completes and finish job ?
    3) If No, then what steps are suppose to be DONE so as to make sure that Aggregate TRT has new values and perfect values for 0SPELLING ?
    Please answer and coorect if i have any wrong question....

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • How to make Attribute Change run alignment & Hierarchy changes in Aggregate

    Hello
    I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
    I posted previously the same question but there were not good answers and i was not able to understand clearly .....
    If there is Process chain XXY which makes Attribute change run for Master Data   0SPELLING ?
    Now there is Aggregate TRT which includes :
    0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
    Now pls answer following question ?
    1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING ,   Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ?         YES or NO
    2)  If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY  completes and finish job ?
    3) If No, then what steps are suppose to be DONE so as to make sure that  Aggregate TRT has new values and perfect values for  0SPELLING ?
    Please answer and coorect if i have any wrong question....

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • I bought and use iPad in Hong Kong, but I cannot update apps because the apple store asked me to change to Hong Kong, how to make the change (correction)?

    I bought and use iPad in Hong Kong, but I cannot update apps because the apple store asked me to change to Hong Kong, how to make the change (correction)?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located; re-select country/region even if it is correct
    9. Tap "Done".
    Note: If the change doesn't take effect, sign out of account and sign in again.

  • Trying to understand how to make a change to a SSIS package

    I was pretty familiar with DTS packages but SSIS packages have me completely lost.
    Let me start by saying we use TFS (Team Foundation Server) and Visual Studio 2010 for source control and development.
    I have to make a change which is very simple. I have to add a new field to an export file.
    My problem is I dont know what SSIS is or what all the components mean and what they are used for. I have no clue where to make this change. Does SSIS have any concept of 'source code'. How would an export file layout be defined and where would I look for
    it? I have read something about a 'manifest file' but again I don't know what it is or what it is used for or where I could find it.
    I have to make this change in TFS via Visual Studio but I don't see anything in the solution that looks like the SSIS stuff I need. If it is not there, I need to find it (on the production server maybe?) and add it to TFS.
    Is there a good online tutorial that explains all this? I tried the Microsoft ones and they are impossible to follow since they consist of dozens of links that completely tie you in knots.

    As of SQL Server 2012, SSIS catalogs are used for package version control, management and execution. Packages can be recovered from the catalog for edition and redeployment. It doesn't have a "source code". Which version of SQL Server are you using?
    Please note that your questions are kind of comprehensive and generic. There are no single formulas for package edition. Wether adding a new column to your file layout will be transparent to the package depends on its implementation and flow. As a general
    rule, you'll have to manually add the new column to each input and output of each source, transformation and destination tasks in your data flow.
    Follow these instructions to download a package from your SSIS catalog in SQL Server 2012. I think its the same process for SS 2014.
    http://www.mssqlgirl.com/editing-published-ssis-package-in-sql-server-2012.html

  • How to make picture button in oracle forms?

    can any one tell me how to make a picture button in oracle form builder?
    please help?

    Hi,
    Only a icon can be pasted on the push button. We can not user jpg,,jpeg or gif for the picture only ico file can be used.
    go to properyt pallet,
    make iconic as yes
    give the path in icon filename --- C:\Program Files\Winamp\eMusic\eMusicClient
    where eMusicClient is -- icon file name without extension, dont use " " in path
    bye

  • How to make the changes to be permanent when a session is executed successfully ?

    Hi Everyone,
    I am new to ODI.
    I am learning how to create interfaces for the data flow between two Oracle databases !
    Now I started by developing a simple interface of loading data from EMPLOYEES table of HR schema to another table created by me EMPLOYEES_TGT in the same schema.
    When I dragged and dropped the source and target tables in the mapping tab it showed do you want to map automatically. I selected Yes and then When i executed the project I got errors and I have manually changed the code in the session. One session is executed correctly after changing the code in the sessions, when I start the same project once again it is throwing the same errors. How can I make the changes of the code that I changed in the previous session permanent to that interface ?
    Could anyone please guide me how to overcome this problem ? How can i make the changes permanent when one session has completed execution ?
    Thanks& Regards,
    Anvesh

    Hi Raghunar,
    The following is the code generated by default with the interface:
    insert /*+ append */ into HR.I$_EMPLOYEES_TGT
      EMPLOYEE_ID,
      FIRST_NAME,
      LAST_NAME,
      EMAIL,
      PHONE_NUMBER,
      HIRE_DATE,
      JOB_ID,
      SALARY,
      COMMISSION_PCT,
      MANAGER_ID,
      DEPARTMENT_ID,
      IND_UPDATE
    select
    EMPLOYEE_ID,
      FIRST_NAME,
      LAST_NAME,
      EMAIL,
      PHONE_NUMBER,
      HIRE_DATE,
      JOB_ID,
      SALARY,
      COMMISSION_PCT,
      MANAGER_ID,
      DEPARTMENT_ID,
      IND_UPDATE
    from (
    select 
      EMPLOYEES.EMPLOYEE_ID EMPLOYEE_ID,
      EMPLOYEES.FIRST_NAME FIRST_NAME,
      EMPLOYEES.LAST_NAME LAST_NAME,
      EMPLOYEES.EMAIL EMAIL,
      EMPLOYEES.PHONE_NUMBER PHONE_NUMBER,
      EMPLOYEES.HIRE_DATE HIRE_DATE,
      EMPLOYEES.JOB_ID JOB_ID,
      EMPLOYEES.SALARY SALARY,
      EMPLOYEES.COMMISSION_PCT COMMISSION_PCT,
      EMPLOYEES.MANAGER_ID MANAGER_ID,
      EMPLOYEES.DEPARTMENT_ID DEPARTMENT_ID,
      'I' IND_UPDATE
    from HR.EMPLOYEES   EMPLOYEES
    where (1=1)
    ) S
    where NOT EXISTS
      ( select 1 from HR.EMPLOYEES_TGT T
      where 
      and ((T.EMPLOYEE_ID = S.EMPLOYEE_ID) or (T.EMPLOYEE_ID IS NULL and S.EMPLOYEE_ID IS NULL)) and
      ((T.FIRST_NAME = S.FIRST_NAME) or (T.FIRST_NAME IS NULL and S.FIRST_NAME IS NULL)) and
      ((T.LAST_NAME = S.LAST_NAME) or (T.LAST_NAME IS NULL and S.LAST_NAME IS NULL)) and
      ((T.EMAIL = S.EMAIL) or (T.EMAIL IS NULL and S.EMAIL IS NULL)) and
      ((T.PHONE_NUMBER = S.PHONE_NUMBER) or (T.PHONE_NUMBER IS NULL and S.PHONE_NUMBER IS NULL)) and
      ((T.HIRE_DATE = S.HIRE_DATE) or (T.HIRE_DATE IS NULL and S.HIRE_DATE IS NULL)) and
      ((T.JOB_ID = S.JOB_ID) or (T.JOB_ID IS NULL and S.JOB_ID IS NULL)) and
      ((T.SALARY = S.SALARY) or (T.SALARY IS NULL and S.SALARY IS NULL)) and
      ((T.COMMISSION_PCT = S.COMMISSION_PCT) or (T.COMMISSION_PCT IS NULL and S.COMMISSION_PCT IS NULL)) and
      ((T.MANAGER_ID = S.MANAGER_ID) or (T.MANAGER_ID IS NULL and S.MANAGER_ID IS NULL)) and
      ((T.DEPARTMENT_ID = S.DEPARTMENT_ID) or (T.DEPARTMENT_ID IS NULL and S.DEPARTMENT_ID IS NULL))
    I modified the code to the following :
    insert /*+ append */ into HR.I$_EMPLOYEES_TGT
      EMPLOYEE_ID,
      FIRST_NAME,
      LAST_NAME,
      EMAIL,
      PHONE_NUMBER,
      HIRE_DATE,
      JOB_ID,
      SALARY,
      COMMISSION_PCT,
      MANAGER_ID,
      DEPARTMENT_ID,
      IND_UPDATE
    select
    EMPLOYEE_ID,
      FIRST_NAME,
      LAST_NAME,
      EMAIL,
      PHONE_NUMBER,
      HIRE_DATE,
      JOB_ID,
      SALARY,
      COMMISSION_PCT,
      MANAGER_ID,
      DEPARTMENT_ID,
      IND_UPDATE
    from (
    select 
      EMPLOYEES.EMPLOYEE_ID EMPLOYEE_ID,
      EMPLOYEES.FIRST_NAME FIRST_NAME,
      EMPLOYEES.LAST_NAME LAST_NAME,
      EMPLOYEES.EMAIL EMAIL,
      EMPLOYEES.PHONE_NUMBER PHONE_NUMBER,
      EMPLOYEES.HIRE_DATE HIRE_DATE,
      EMPLOYEES.JOB_ID JOB_ID,
      EMPLOYEES.SALARY SALARY,
      EMPLOYEES.COMMISSION_PCT COMMISSION_PCT,
      EMPLOYEES.MANAGER_ID MANAGER_ID,
      EMPLOYEES.DEPARTMENT_ID DEPARTMENT_ID,
      'I' IND_UPDATE
    from HR.EMPLOYEES   EMPLOYEES
    where (1=1)
    In the same way for other steps in the same session I got some errors and I fixed them by changing the code. But the problem is that where can I change this so that it will be a permanent solution.
    Thanks,
    Anvesh

  • How to make/save changes to the file - /etc/httpd/httpd.conf - in Terminal

    I'm new to Unix/Terminal and am attempting to make changes in the Apache Web server's configuation file - /etc/httpd/httpd.conf - so that I can use PHP locally. (The "LoadModule php4" has a "#" mark in front of it which I am attempting to remove.) This approach is suggested in the book "Dreamweaver MX 2004 with asp, coldfusion, and php." The book includes instructions on how to adjust the files using pico in Terminal. But the book doesn't explain how to work with Unix/Terminal to enable the right access permission to save the changes in Terminal. I've been able to make the changes in pico the book recommends, but I'm not able to save the changes. I'm the only user of the computer.
    Please advise how to be able to save the changes. Thank you!
    G4   Mac OS X (10.3.9)  
    G4   Mac OS X (10.3.9)  
    G4   Mac OS X (10.3.9)  

    jamesk,
    httpd.conf is owned by 'root'. therefore, to save your changes you need to use 'sudo' when editing the file. before you do that, you should type in
    man sudo
    and read about what sudo actually does. be aware that it can give you all-encompassing power to do many things - including messing things up.
    once you have read about sudo, first do (substitute full paths, if necessary - e.g. /etc/httpd/httpd.conf for httpd.conf)
    sudo cp httpd.conf httpd.conf.bak
    to backup your httpd.conf file (in case you make an error), then do
    sudo nano httpd.conf
    to make your changes, then save the file.
    then do
    sudo apachectl configtest
    to test changes to the server config (it should let you know if there is an error).
    finally do
    sudo apachectl graceful
    to restart the server and re-read the config file.
    cheers,
    b

  • How To Make Shapes Change Colors When Clicking on them. Example Sheet Sales Data.xlsx template with Excel 2013

    My question is related to the Sales Data.xlsx template that comes with Excel 2013
    IN this workbook is a sheet named Sales Data. It has, 3 shapes. One each for each of the tab sheets in the workbook. When I click on the 'Sales Report' shape it selects the sales report tab. When you do this the shape changes color and the 'Sales Data' shape
    also changes color.
    However I'm unable to figure out how the colors are changing. 
    I don't see any macros in the workbook/worksheet. Nor do I see any code for worksheet events. I don't see any modules in VBA either. I think what is happening is that there are 2 shapes. When you click on one, the one shape goes to the background and the
    other one comes to the foreground.
    I'm no sure how it's doing that. 
    Can someone look at this template, Sales Data.xlsx that comes with Excel and explain how this functionality works?
    Thank You
    Keith Aul
    Keith Aul

    The shapes are exactly as I suspected, each of 3 sheets has 3 'navigation' shapes. The shape with the same name as the sheet has no hyperlink and is coloured differently to indicate it refers to the active sheet. The other two have hyperlinks linked to respective
    sheets. 3x3 shapes, 9 in total, none of them ever change colour!
    It's logical though not necessary to name each shape same as the sheet it links to, but they'd work just as well with their original default names.
    For aesthetics, the shapes that refer to own sheet have a horizontal line on top, actually two shapes as a group.
    If still confused copy each set of 3 shapes to a 4th sheet, or open two new windows so you can see all three sheets at the same time.

  • How to make the changes in Existing DC

    hi
    I am new to the NWDI. We have created one trac and we have added one .SCA file to that. This file contains many DC's.
    I have imported this track in to NWDS. I am able to see the list of the DC in Development configuration prospective. Now i need to make some changes in the existing code or to see the details.
    But i am not able to see the those DC's in  Webdypro prospective to make the changes.
    what need to be done. Please let me know any steps need to be configured to access the DC's in webdynpro prospective.
    Regards
    Vijay

    Hi ,
    check the below link
    http://help.sap.com/saphelp_nw04s/helpdata/en/34/053fa30a68844c8495a863ae13dbe1/frameset.htm
    Koti Reddy

  • How to make pictures on the iPhone 5 in full screen?

    Photograph on the iPhone 5. When viewing the photos on the iphone 5 at the bottom and top of the screen black bar. How to make photos to be full screen?

    Hi Nimesh,
    Just add the adddition default 'X' for the first radio button .
    Syntax :
    PARAMETERS : button1 RADIOBUTTON GROUP r1 USER-COMMAND m1 default 'X'.
    Reward points if useful
    Thanks & Regards,
    Basha

  • How to make field changes in SRM at item level

    Dear All ,
    I have a requirement where I would need some help .,
    In a limit SC I need to restrict the option Required field  instead of Drop down it should always have one option that is
    "Between" as shown and the end date should be made mandatory in such a case ...
    By modifiying /SAPSRM/WDC_UI_DO_LIMIT and going to component configuration I am able to make the end date mandatory ..
    however the check fails still since if the field is left as blank instead of Between option the system automatically changes it
    to "From"  and the end date is then wiped off  by the system
    Please can some one guide me if there is an option to make  changes in this by meta data concept ..if not what is the way out ?
    I tried doing the same in component configuration but do not want to use access key ..
    Please let me know Any help would be much appreciated ..

    Dear All
    Please provide any options on how to do it ...

  • Windows media is corrupt, I have QuickTime but don't know how to make the change, can you please help me?

    Hi, I am new to you and I am having problems with my Windows Media. I ran a fix it test on it and it came back saying that the player is corrupt and can not read the dll. Plus I have gotten pop-ups saying the script on the page had quit running 2 or 3 times, that's what made me check it. I have Quick Time on here, I have never used it before. How do I properly go about making the the switch? Do I delite the Windows Media? Do I need to do anything to QuickTime other than just open it? Thank you so much for your time & help.
    Terri Young

    When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer?  Your iTunes library does not have an email address.  An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases.  Changing your Apple ID will not make songs disappear from your computer's iTunes library.
    If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID.  In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password).  That may not be your current email address, but Apple uses it as your user name, so it does not matter.
    On the iTunes Store Home screen, click on Purchased under QUICK LINKS.  This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost. 
    NOTE:  If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID. 
    For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
    If that's not what you mean by "changed the email address on my account," please post back with more details.

  • How to make small change in old "finished" project

    I'm now working in PPCS3. I want to retitle, but no other changes, a project I did 2 years ago in PP2. I have the MPEG2 output of that project, but did not keep the source material and prproj file. I do have the background clip for the title. I could put the old MPEG2 on the timeline of a new project, overlay the new title material at 100 opacity and fade it to the original at its end. This would be easy to do, but would the bulk of the project suffer noticably from rerendering the already compressed MPEG2 material? I could do the title piece as a new project, but can't figure out how to chop off the front-end title seconds from the original MPEG2 to join it up with the new title segment. Are there any other options, and any advice on which way to go?

    From Harm's reply, I guess I didn't make one question in my plea clear. Forget the reference to "title" footage, is there a utility that will modify an m2v file to remove a selected number of video frames at one (front) end? I realize one or two compression cycles would have to be redone and would suffer. Second question, could such a utility replace the removed frames with a new m2v segment? To do the compression at the "splice" there would need to be overlap and again the quality of that splice region would suffer a bit, but the rest of the m2v would be in "new" condition. For what its worth, my original m2v was done with CBR encoding and I have several still frame segments of a second or more which should be OK for the splice, if it is possible at all.
    Thanks for your constructive comment, Jim.

Maybe you are looking for