How to make project in 16:9 ratio?

Hello guys,
I apologize for this very silly question. But how do I make my project appear as 16:9?
I did open new project and set presets as HDV 1080i. But the project (main window) is still appearing
as 4:3. What am I missing?

That preset is 1440x1080 with non-square pixels. Click the View button at the top right of the Canvas and choose Correct for Aspect Ratio to see it properly.

Similar Messages

  • How to make project across two DVDs with one DVD menu

    Hi!
    I’m working on a large project (3 hours of video with about 10 chapters, over 50 pictures in a playlist, and special feature chapter) and wondering is it possible to make an project across 2 or more DVDs, but to have menu only on first one? I’d like to make an project that comes with menu only on first DVD and when you click on e.g. “special features” button, then you get the message “please insert DVD 2″
    Is it possible and how to make something like that?
    Thank you!

    I would have EACH DVD begin with a menu. Somebody will insert DVD 2 first no matter how you label things.
    Yes, you are right! People just don't want to read, but I'm making an animated menu in AE and it'll take about 300MB (rendered in .mpg). That is what I want to avoid on other DVDs to save some space. You just gave me an idea so I'll make some small menu for other one or two DVDs with just a few informations about what DVD is inserted and what DVD you need to insert if you want to watch something else from that project. Thank you!
    I just have to learn better Encore and its capabilities and limitations (if I have time )

  • How to Make Project Code as Mandatory

    Hi ! I Need Project code as mandatory in Po's and Sales Order in Row Level. How to Make that one. Also i have a issue with approved PO's. If some PO got approved is there any option to make amendment and resend for again approval.
    Thanks and Regards
    Kamal

    Hi Kamal.......
    Try this below SP for making project Code Mandatory........
    For Sales Order:
    If @object_type='17' and @transaction_type='A'
    BEGIN
    If Exists (Select T0.DocEntry from ORDR T0 Inner Join RDR1 T1
    On T0.DocEntry=T1.DocEntry
    Where T1.Project Is Null
    And T0.DocEntry = @list_of_cols_val_tab_del)
    BEGIN
    Select @error = -1,
    @error_message = 'Please select Project'
    End
    End
    For Purchase Order:
    If @object_type='22' and @transaction_type='A'
    BEGIN
    If Exists (Select T0.DocEntry from OPOR T0 Inner Join POR1 T1
    On T0.DocEntry=T1.DocEntry
    Where T1.Project Is Null
    And T0.DocEntry = @list_of_cols_val_tab_del)
    BEGIN
    Select @error = -1,
    @error_message = 'Please select Project'
    End
    End
    If your PO is approved and you want to ammend it then your approver has to reject the PO first and it will come to you and then make edition and send it again......
    Regards,
    Rahul

  • How to make project name / no. visible in suppor message?

    Hello,
    When creating a support message (NOTIF_CREATE), I can provide a project name /project number with the message.
    This info is also available, when starting the transaction monitor (CRM_DNO_MONITOR).
    But when looking into the message itself, this information is not available anymore.
    Where can I make this info visible?
    I am assuming, that the project is somehow linked to the support message and that the project is available in principle.
    Can anyone provide me a way how to link / show the project within the support message?
    Thanks and Regards,
    Jan

    HI
    another helpful link i found, but nt sure that clear ur issue
    [Re: Field "Subject" in the web service desk (Incident Management)|Re: Field "Subject" in the web service desk (Incident Management)]
    [Re: User Status profile in Service Desk|Re: User Status profile in Service Desk]
    jansi

  • How I make project work?

    Hello. I have recent problems with my last job due to some game project not completed in time and also not working. This project is now finish after agreement with empoloyer of only receiving 75% of payment. Now I have new project again from america and I am try to make sure mistke not happen again. How can we be planning project? Is good project management program for java available? I am looking for free.

    dont waste your time with project management, too
    much time is wated in such bureaucracy, just do the
    bloody thing!!!Project management and its methodologies and their accompanying tools can
    be an accurate measuring and forecasting system. But not if deployed in the
    hands of management that only thinks in terms of Wall Street numbers and
    especially not in the hands of brainless little idiots like you. What do you know?
    Nothing. Now go away, you disease.
    Jos
    ps. @OP: don't think in terms of tools, think in terms of historical statistical data
    instead. If the total throughput time == N, the total productive time spent on the
    project is <= N/pi. Estimate the amount of productive time and multiply that by
    pi; you've got a nice estimation then for the grand total deadline of the project. The
    fraction (1-1/pi) of the total time is wasted? on tryouts, thinking, testing etc.
    Believe it or not.
    kind regards,
    Jos
    ppss. pi is a scientific number ;-)

  • OTL TIme card: How to make Project as criteria for Expenditure type

    Hi,
    I need to add project as criteria for Expenditure Type LOV.
    Can we pass project information as bind varaiable to Expenditure LOV? I need to customize expenditure LOV such that it picks up expenditures defind at the project level apart from preference level.
    THanks
    PRasad

    Hi,
    You can do it by OAF personalization.
    Enable the link 'Personalize page' on the given OTL page and then for that column set the rendered property as 'True' and then the column will become mandatory,
    Regards,
    Anshum

  • How to make Project Template in MS Project Pro 2013

    Dear All,
    is there any method by which Standard Template can be build in MS Project Pro 2013 as Global Calendar etc?
    As far as i know, we can do this in PWA once we made EPT but looking something by which if project manager wants to create any project then he can choose such template in MS project Pro 2013 itself?
    Is there any way?

    Just to add on to Guillarme's reply, this might help, if you want to create projects and templates directly in Project Pro 2013, this might help:
    http://epmainc.com/blog/creating-project-templates-microsoft-project-2013
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • How to make LR remember the Crop Ratio

    Is there a way to have LR remember a crop ratio so you don't have to always re-selected it again when you move to another image?
    I needed to crop over a 100 photos to 5x7. I would select crop, then choose 5x7, adjust the crop to what I want, and move to the next image. The Crop ratio would be at the original, so I would have to re select 5x7 for every image. What am I doing wrong?

    Select all 100 in Grid view, expand the Quick Develop panel, click the Saved Preset drop down, click the Crop Ratio drop down menu and apply 5x7.
    Press R to jump to Crop mode and tweak composition as needed.

  • How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?I have a film in a proyect

    How to make a good quality 8 Giga DVD out of a Project in AVI of 14 Gigas?
    I have a film in a proyect made with a miniDV camera in my old Premiere 6.5
      It has 68 minutes and after exporting it with the Microsoft DV AVI compressor in 100 % quality and not compressing the audio, it  ended in an AVI of 14 Gigas.
    I would like to obtain a DVD of the best quality in audio and video possible. How can I do it?  SHOULD I EXPORT IT FROM THE PREMIERE 6.5 WITH ANOTHER COMPRESSOR OR IN LESS THAN 100% QUALITY WITH THE SAME DV AVI COMPRESSOR ? my INTENTION IS TO USE THE NERO VISION AFTERWARDS... I HAVE THE NERO VISION 4...-. FROM 2007- WOULD IT BE OK OR IS THERE A BETTER ONE? - I know there are newer ones...but better?
    I HAVE POSTED THIS A FEW DAYS AGO. THANKS TO THE PEOPLE THAT REPIED. BUT I THINK MY QUESTION IS NOTFULLY ANSWERED YET.
    i NEED THE BEST QUALITY I CAN GET, EVEN WHITH MY PREMIERE 6.5, BECAUSE IT IS A FEATURE FILM THAT TOOK ME SEVERAL YEARS AND THIS LAST REMAKE IS NOW READY AFTER TOO MUCH WORK.
    THANKS A LOT !!!!!!!!!!!!!

    Hello Thanks for your replys and sorry for being so fussy about this.
    I have now seen that one of the options for exporting from Premiere 6.5 is Adobe MPEG encoder. So Do you guys think it would be a good idea to do it with that, Or Would it be better AVI or DV AVI compressor from Premiere before making the DVD?
    I have the Nero Vision 4.9.6.6  But I may be able to look for another one if you think it is better...
    Thanks a lot for your advises...

  • How to make change in Issue list across all project sites?

    Hi,
    We all have issue list in our project sites. We need to add some values to some of the columns in that issue list. The requirement is we need these changes to reflect in all the new sites. Also how to make these changes reflect in current existing sites.
    Can anybody suggest a way to achieve this. One thing that i am aware of is creating a new project site template and associating it with EPT but that still not solves the issue for preexisting sites.
    Please help asap.
    Thanks in advance.

    Hi SpWrk
    If you have already created some sites. You would need to apply these changes either Programetically (Powershell or C#) or Manually.
    However, you can take the following approach to avoid this problem in future. (i.e. Your "future" changes will appear in existing sites too). I am writing the procedure breifly but let me know if you need more details on this
    1) Create a content type (e.g. "Project issues" at PWA level)
    2) Associate this content type with the Issues List in your site template as well any existing project sites. Make it a default content type for Issue lists. save your site template
    3) Create all your custom columns in this new Content type (changing OOB issue columns can break your reporting)
    4) Your changes to content type should reflect in future sites as well as existing sites (whereever the content type was appiled)
    Regards
    Hammad Arif EPM Advice Blog

  • How to make the entire project in the project server 2013 reschedule؟

    How to make the entire project in the project server 2013 reschedule ?
    Because item %compelet related to reschedule
    In this photo it is known there are no items update project

    Hi,
    In PWA, you do not have the feature to update the project plan in one click, meaning marking as completed the work before the status date or reschedule after the status date the remaining work. Either you have to use Project Pro, or edit individually the
    assignments with the actual work (if not comming from timesheets) and remaining work.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    1-800-676-2775  apple support   tech support 1 800 275 2273
    If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
    click the apple----->click about this Mac ------> click on version----> until you see the serial number.  You may have to do this a couple of times if it freezes before you have all the numbers.  A camera might help.
    Good Luck

  • Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

    Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

    Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
    I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
    Sorry, I can't be of more help.

  • Question: How to make EDQ Purge Project data after Finishing a Job?

    Hi all
    I know how to purge project data manually by clicking
    but I am wondering if there is a way to make EDQ to Purge project data after Finishing a Job by itself.
    Thank you in advance for all answer.

    Hi,
    In EDQ 9.0, there is no automated purge facility.
    However, note that you can configure a job to write only bare metrics and the data and results data that you are choosing to stage (or indeed to stage no data at all) - and you can set such options up to be variable at runtime using a run profile. It is normally better to consider purging separately from the running of jobs, since any temporary footprint a job has in the results database is cleared up automatically in any case.
    Regards,
    Mike

  • How to make and Burn the project to DVD

    Would you pleased advice me how to make and burn the Project to a DVD as I'm new user for the Adobe Premier Pro.
    Tks & B/regards,
    Handjojo

    As said before you need Adobe ENCORE to make dvd menu and burn to dvd.
    But first you need to download and install Adobe ENCORE.
    Follow the instrtuctions in the link below how do downlaod and install.
    Encore CS6 not installed with Creative Cloud
    Then go over to Adobe TV.
    How to make a DVD.
    AdobeTV Learn Encore CS4 
    Learn Encore CS5 | Adobe TV 
    Using Premiere Pro CC & Encore CS6 for Bluray, DVD, and Interactive Video for iPad,ATV, and Mobile HD | DAVTechTable | Adobe TV 

Maybe you are looking for

  • Need help to modify a report written using Field-Groups Concept. - Part1

    Hello ABAP Experts, I need your help to modify the following report with following requirement as I have least knowledge about the field-group concept. Thats is the reason, I am pasting the whole code. As it is part of our production requirement. I r

  • Is it possible to add a "suffix" to many song titles at once?

    When I add a live album to my iTunes collection, the song often show up as duplicates. The studio version and the live version are by the same band, so iTunes shows them as duplicate files when using Display Duplicates. To get around this I add the w

  • Create classification view with inbound MATMAS_BAPI iDoc

    Hi there, We receive material master data from our customers and create them in our SAP system using a MATMAS_BAPI mssage type. Now we should also create the classification view of the materials with a certain classification type and value. The MATMA

  • Bot App thru iTunes from iPhone, and deleted before sync.How to retrieve?

    Is there any way I can use my bill from the store to retrieve my app that I just bought? I erased it from my iPhone because I had it working, then app. (EyeTV)wouldn't connect, so I thought I would delete, however I had forgotten to sync my phone to

  • Publication Service available in template VM?

    Hello, We have installed the patch Patch 8919063 (Oracle Product Hub for Communications, Release 12.1.1) on the applications tier VM. Afterwards we have followed the post installation steps of the patch (Document ID 885359.1). This document refers to