How to make selection screen display only

hi all ,
is there a way can only display the selection screen  , but not modifiable  , i don't want to create a new screen but use the selection screen.
regards
Kevin

Hi,
Use the Loop at screen...End loop in At selection-screen output event.
Screen-name should be your selection screen Field names...
Refer to this link...
Loop at screen
try the below code.
AT SELECTION-SCREEN OUTPUT.
loop at screen.
IF screen-name = 'FIELD2' .
screen-input = 0.
screen-output = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
loop at screen.
IF screen-name = 'FIELD1' .
screen-input = 0.
screen-output = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Edited by: avinash kodarapu on Dec 8, 2008 12:15 PM

Similar Messages

  • How to make Select List Read only (Keep key Data)

    I'd like to make a select list read only when the screen is in maintenance mode because the select list value is part of the key.
    However, when I make the select list read only, the update fails because it appears making it disable lose's it's value.
    How can I make a select list read only and keep it's value for update.

    In HTML Header I have
    <script type="text/javascript">
    function Disable_List(pthis,hideitem)
    if ($x(hideitem).value == 'Y')
    {   $x(pthis).disabled = "disabled";
    </script>
    <script type="text/javascript">
    function Load_Start()
    Disable_Item('P5_SUBCODE','P5_XW_HAS_VALUE');
    Disable_List('P5_LTY','P5_XW_HAS_VALUE');
    </script>
    When I click apply changes, my Validation check that doesn't allow nulls in the "P5_LTY" fires saying the field can't be null. The select list is grayed out and I see the value, but the validation check thinks it's null.
    Edited by: spuchc on Jun 15, 2010 8:03 AM

  • How to make selection-screen block as unvisible?

    hi,
    in report program there are two selection screen blocks like this.
    SELECTION-SCREEN BEGIN OF BLOCK b1.
         parameters: rb1 as radiobutton group r1 user-command ucomm,
                  rb2 as radiobutton group r1,
                  rb3 as radiobutton group r1,
                  rb4 as radiobutton group r1,
         SELECTION-SCREEN BEGIN OF BLOCK b2.
              parameters: ip1 type string.
              select-options: date for pernr-begda.
         SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN END OD BLOCK b1.
    Now when i clicked on rb4 the selecetion screen block b2 has to be visible.
    And rest of things i.e for rb1, rb2, rb3 it should not visible. it should be disabled.
    Regards,
    Shankar.

    hi,
    i am doing like this.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text.
      SELECTION-SCREEN SKIP 1.
      SELECT-OPTIONS: pernr FOR person-pernr.
      SELECTION-SCREEN SKIP 1.
      PARAMETERS: tempname LIKE rlgrap-filename.
      SELECTION-SCREEN SKIP 1.
      PARAMETERS: rb_p1 TYPE c RADIOBUTTON GROUP r1 USER-COMMAND rbg,
                  rb_p2 TYPE c RADIOBUTTON GROUP r1,
                  rb_p3 TYPE c RADIOBUTTON GROUP r1,
                  rb_p4 TYPE c RADIOBUTTON GROUP r1.
      SELECTION-SCREEN SKIP 1.
        SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text1.
            PARAMETERS: country(25) TYPE c MODIF ID ccc.
            SELECT-OPTIONS:Fromdate FOR person-begda NO-EXTENSION MODIF ID ccc.
        SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN END OF BLOCK b1.
    AT SELECTION-SCREEN OUTPUT.
    IF rb_p4 = ' ' .
      LOOP AT SCREEN.
          IF SCREEN-NAME = 'COUNTRY'
          OR SCREEN-NAME = 'FROMDATE-LOW'
          OR SCREEN-NAME = 'FROMDATE-HIGH'
          OR SCREEN-GROUP1 = 'CCC'.
              screen-input = 0. "Disable
          ENDIF.
          MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
    IF rb_p4 = 'X' .
      LOOP AT SCREEN.
          IF SCREEN-NAME = 'COUNTRY'
          OR SCREEN-NAME = 'FROMDATE-LOW'
          OR SCREEN-NAME = 'FROMDATE-HIGH'
          OR SCREEN-GROUP1 = 'CCC'.
              screen-input = 1. "Disable
          ENDIF.
          MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
    Now it's making as disabled the fields which are in block B2.
    Acutually my requirement is when i ever user selects RB_P4 then only that screen has to appear. and for rest of 3 RB it should not visible. it should be invisible.
    for this wat to do....
    Regards,
    Shankar.

  • How to make on screen display  (iPod Classic 80 gb) more useful?

    I have put all my classical CD's onto my iPod with the intention to make a selection of a number of those that I like to play most and put them into a playlist called "Favorites".
    Now, when I get into the "iTunes" program on my laptop and I choose the "Albums" display, then -after picking that album- say "Bruch Violin Concerto 1 and Scottish Fantasy" will be displayed in that way.
    If I then take the iPod on it's own (after having transferred that album to the "Favorites" playlist) the screen does NOT show "Bruch Violin Concerto 1 and Scottish Fantasy", but the 8 individual tracks that make up that disk. Now when one has a number of albums in the "Favorites" playlist, that list becomes a rather useless "hotchpoth" of individual tracks, rather that the quick access guide it was intended to be.
    So is there a way that a playslist can reflect the actual album titles it contains, rather than a complete overview / listing of the individual tracks making up those albums?
    Thank you in advance!
    Jacques Pelt

    Victory!
    As someone mentioned on another thread, I found the article here on Apple's support pages with instructions for completely removing iTunes, and after backing up, I did so and installed version 10 which can also be found on the search window at the top of the page here.
    It is syncing.
    Finally.
    AND I have Cover flow back! Everything's coming up aces!

  • How to set selection screen field obligatory dymically

    hi expert,
    i have to make selection screen field obligatory while selecting a check box,i am using the following code can any one help me regards, thanks in advance.....
    PARAMETER:p_user TYPE adr6-smtp_addr ,
              p_check AS CHECKBOX user-command ucomm.
    at SELECTION-SCREEN.
    case sy-ucomm.
    when 'UCOMM'.
      PERFORM set_obligatory.
    ENDCASE.
    FORM set_obligatory .
      LOOP AT SCREEN.
      IF SCREEN-name = 'P_USER'.
      SCREEN-REQUIRED = 1.
       MODIFY SCREEN.
      ENDIF.
      ENDLOOP.
    ENDFORM.                    " set_obligatory

    Hi,
       The following is the sample code.
    PARAMETERS : p_barea TYPE ps0171-barea DEFAULT 'Z1' MODIF ID pb,
                                                " Benefit Area
                 p_imfil TYPE rlgrap-filename,  " Import file name
                 p_lock  TYPE ztx_int-int_name
                   DEFAULT 'ZHBNT06A_METLIFE_INBOUND' MODIF ID pb, " Lock
                p_test  TYPE c AS CHECKBOX,    " Test run
                 p_update type c as checkbox. " default 'X'
    SELECTION-SCREEN END OF BLOCK selb01.
                          AT SELECTION-SCREEN OUTPUT                     *
    AT SELECTION-SCREEN OUTPUT.
    Benefit Area field made display only field
      LOOP AT SCREEN.
        IF screen-group1 EQ 'PB'.
          CLEAR screen-input.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    Regards
    Vick

  • WAD template with BSP Application - how to read selection screen values

    Hello,
    I've created Web template with Web Application Designer (WAD).
    I would like to extend  that page with BSP Application...
    Purpuse of this application is to read some information from tables
    on BW transaction server and display them within Web page.
    Question: How to read selection screen values from a Web template ?
    Thanks for any help,
    Pawel Borowiec

    Hi,
    The selection screen parameters will be on an inputField, so try and get the is of the inputfield generated by doing View source...
    And once you get the inputfield Id, you can read the value in the InputField(InF) by
    using the following code...!
    data : if_value type ref to cl_htmlb_inputfield.
    data : variable type string.
    if_value ?= cl_htmlb_manager=>get_data( request = request
                                                name    = 'inputField'
                                                id      = 'InF_ID_here'
           if if_value->value is not initial.
             variable  = if_value->value.
           endif.
    Hope this helps.
    <b><i>Do reward each useful answer..!</i></b>
    Thanks,
    Tatvagna.

  • Selection-screen problem only when in SE80

    Hi Folks,
    I am getting the following information message when the the element SCREENS is double clicked in the SE80's container.
    Element %_R1_%_APP_%-TEXT touches or overlaps
    other element
    The program is running fine without any error.I want to know why such an info message is getting popped up and how to avoid that.
    Thanks,
    K.Kiran.

    Hi,
    Open the Selection scree in SE51, double click on 1000 screen in SE80 and then click on the layout button to open the screen.
    Then there check out the screen element for which you are getting the error.
    Then adjust its size and check if this error is still coming.
    According to me this Screen element corresponds to SELECTION-SCREEN COMMENT statement in the program, you might have given the length of this text there try and reduce the length there and see if this error still remains.
    Generally we should not modify the Selection-Screen's in SE51 as they will always get regenerated when ever you activate the program and your changes will be over written.
    So try to play around with SELECTION-SCREEN statements only in the program, what you can get from SE51 is what this SCREEN ELEMENT corresponds to in the program.
    Regards,
    Sesh

  • How to save selection screen in LISTCUBE?

    I execute LISTCUBE, enter my CUBE name, get message "The Infoprovider contains too many characteristics. Make a preselection.".  I choose 20 characteristics to display then the data target browser selection screen display.  Is there a way to save this selection screen so I don't have to repeat selecting these same characteristics every time? I tried to save this as a variant but got message "It is not possible to save variants."
    Any suggestions would be greatly appreciated. Thanks.

    Hi,
    This transaction cannot get screen variants. This is because each time the listcube for an infoprovider is executed, it creates a new report (from se38).
    What you may try to do is to get the name of the report (its a very long name, you can see it in the lower right part of the sapgui, where you see the system id) after selecting the infoprovider in listcube, and into se38 transaction, copy that report to a new z report. then, you may modify this report to be executable in attributes.
    hope this helps.
    regards,
    Diego

  • How to capture selection-screen values

    Hi,
      How to capture selection-screen values when user pressing F3 or Back button after the display of report.
    Regards,
    Bujji.

    Hi Bujji,
    select-option are actually ranges or more general internal tables with the structure:
    SIGN:    'I'nclusive or 'E'xclusive
    OPTION:  'EQ', 'BT', 'NE', 'GE', 'CP', ....
    LOW:     low value of type of the curresponding "FOR table-field"
    HIGH:     high value of type of the curresponding "FOR table-field"
    You may just code:
    TABLES: mara.
    SELECT-OPTIONS s_matnr FOR mara-matnr.
    LOOP AT s_matnr.
      WRITE: / s_matnr-sign,
               s_matnr-option,
               s_matnr-low,
               s_matnr-high.
    ENDLOOP.
    If you find my answer useful, please don't forget the reward.
    Regards,
    Juergen

  • Can someone tell me how to make my screen full size with Safari ?  I am using a Mac osx 10.6.8.

    Can someone tell me how to make my screen full size on my Mac OSX 10.6.8. using safari.  I know this is a simple question. I have always had it on full screen and recently had it worked on remotely and now I can't get the screen back to full size.  I appreciate any advise you can offer. Thank you

    from the BetterTouchTool blog, older versions can be obtained using these links:
    The last 64bit Snow Leopard (10.6 ) version (v 0.939 ) can be downloaded here
    <http://bettertouchtool.net/btt0.939.zip>
    If you are using an older 32bit Mac you’ll have to use this version: 0.785
    <http://bettertouchtool.net/btt0.785.zip>

  • How to make full screen on safari

    how to make full screen on safari

    One way is to download and install Saft - MacUpdate or CNET Downloads.
    Or you can click on the green expland gadget in the top right of Safari's titlebar.  However, this will not expand Safari to a true full-screen view as will Saft.

  • HOW TO USE SELECTION SCREEN

    HOW TO USE SELECTION SCREEN
    I WANT TO INSERT PURCHASE DOCUMENT NUMBER
    AND WANT TO SEE ALL INFORMATION FOR THAT PURCHASE DOCUMNET NUMBER.
    THANKS IN ADVANCED.

    The main use of the selection-screen is to select screen in the back ground
    ex :    
    TABNAME
    IN THE ABOVE FIGURE  TABNAME IS THE FIELD AND THE BACK END IS   CREATED SCREEN IN THE BACK END
    THIS SCREEN CREATION WE CAN USED THE SCREEN SELECTION

  • How to pass selection screen parameters in text elements?

    how to pass selection screen parameters in text elements?

    don't you mean he other way around. Assign text-elements (selection texts) to select options?
    This you do in the menu where you can find text-elements, selection texts.
    menu Goto->text elements->selection texts.
    Edited by: Micky Oestreich on May 10, 2008 2:45 PM

  • How to cal selection screen in module pool

    Hi abapers,
    I have to use selection screen in module pool programme..How to call selection screen in module pool.
    Regards,
    ramya

    YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
    SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
      SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                          NO INTERVALS.
        SELECT-OPTIONS SEL1 FOR SY-SUBRC.
        PARAMETERS     PAR1 LIKE SPFLI-CARRID.
        SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
      SELECTION-SCREEN END OF BLOCK BL1.
    SELECTION-SCREEN END OF SCREEN 123.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN BEGIN OF SCREEN 99.
      SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                       USER-COMMAND US01.
      SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
      PARAMETERS     PAR2 TYPE I.
    SELECTION-SCREEN END OF SCREEN 99.
    THEN YOU HAVE TO CALL THAT
    CALL SELECTION-SCREEN scr.
    AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
    CALL SCREEN..
    REGARDS
    SHIBA DUTTA

  • How to make color screen in Web dynpro appl?

    How to make color screen in Web dynpro appl?

    Hi Gobi..
    <u><b>Go thorugh the follwing links</b></u>
    https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/forum.jspa%3FforumID%3D52
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw04stack09themes.zip
    <u><b>Tutorial</b></u>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20edit%20web%20dynpro%20themes.pdf
    <u><b>Setting the Theme</b></u>
    http://help.sap.com/saphelp_nw2004s/helpdata/en/1e/535d420447e054e10000000a155106/content.htm
    <u><b>Configuration</b></u>
    http://help.sap.com/saphelp_nw70/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/content.htm
    Regards,
    GS
    Message was edited by:
            Sathishkumar GS
    Message was edited by:
            Sathishkumar GS

Maybe you are looking for