How to make slicer to remember selected values while moving from report to another

I have Power View on SharePoint 2013 and OLAP Cube on SQL Server 2014 solution.
1) I select slicer values and graphs are updated
2) I move to next page on same Power View file and use slicers.
3) I come back to original reports. My slicer valuers are empty.
Is it possible to make slicer to remember selected values while browsing from reports to another?
Ken
Kenny_I

Hi Kenny_I,
This seems to a by design issue. The selected values within a slicer will be stored in Memory. When we go to another report, the memory will be released.
Best Regards,
Black

Similar Messages

How to make a field under Selection column in DataSource from dimmed to ...

We try to make an InfoObject shows up in Data Selection of an InfoPackage to restrict the data load based on the range of this InfoObject. In order to do this, we will have to go to the source system to run RSA6 to edit the datasource to make this field checked under the Selection column. However when we get to the screen, find this field's Selection column is dimmed. Is there anyway to make it from dimmed to editable that it can be checked?
Thanks

hi Kevin,
try to check table ROOSFIELD, fill OLTPSOURCE with your datasource name and OBJVERS 'A', what's the value for SELECTION ? you may change the value with 'X'.
use abap code :
UPDATE ROOSFIELD SET SELECTION = 'X'
WHERE OLTPSOURCE = 'datasource name' AND OBJVERS = 'A'.
can i know your datasource name (if it's business content) ?
Properties of a DataSource Field
If a request for a DataSource is scheduled in the Business Information Warehouse, selection conditions are specified across certain fields. The property that determines whether a selection in BW using a field
is possible or required is established in the DataSource in the Source System.
In addition, the visibility of the field in BW can be set.
A field that is not visible (or that is hidden) cannot be transferred into the transfer structure.
Definition of the individual values:
'A': Field is hidden in OLTP and BW, property cannot be changed the customer.
'M': The DataSource requires a selection across this field before it is able to extract data (Required field for the generation of a request); property cannot be changed by the customer
'X': The Data Source can select across this field. The customer can change selections and visibility (the field is currently visible and selectable, compare with 'P', '3')
'1': Pure selection field for the DataSource. The customer can change the selection, but not the visibility (the field is currently selectable , compare with '2').
'2': Pure selection field for the DataSource. The customer can change the selection, but not the visibility (field is currently no selectable, compare with '1').
'3': The DataSource can select across this field. The customer can change selection and visibility (the field is currently not visible not selectable, compare with 'P', 'X')
'4': The DataSource cannot select across this field. The customer can change visibility (the field is currently not visible, compare with ' ')

How to make a field default in mm01 while coping from other material

hi all,
i want to make a field default in mm01 ....mara-mstae -
say value 'A', when
i am coping from other material.
normally a T.variant is working in the scenario when im creating a material
but not when i am coping from other material.
Any field exits would work on that .if so how?
thanks in advance,\
sg

i have to make the x-plant material status as 'BE' in mm01 basic view 1 ,when the material is created or copied from .<b>but it should be only default for the user might change it</b>
now when the material was created its workin---- coz a transaction variant has been created.
but when im coping it from other material its picking the properties of the old material ( from which im coping) ..not the field value which i want to display as default.
field exit only validates. can we give default value by it ,before saving a material??????
thanks,
sg

How to get the index of selected values in SelectManyChoice...

How to get the index of selected values in SelectManyChoice... the value which i get is coming when i submit the value second time

By using the given code i get the value of the selected indices, but problem here is i get the value when it get submits at the second time... First time the length of that int array is 0.
Second time it shows the value two times (i.e) First time submitted value and the second time submitted value. After that it works fine.. I have problem while clicking first time only..
The Following error also raises.. One multiselect is dependent on other multiselect.
DF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase PROCESS_VALIDATIONS 3
java.lang.ArrayIndexOutOfBoundsException: 6
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.findObjectFromIndex(FacesCtrlListBinding.java:334)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.getInputValue(FacesCtrlListBinding.java:199)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2416)
     at oracle.jbo.uicli.binding.JUCtrlListBinding.internalGet(JUCtrlListBinding.java:3717)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.internalGet(FacesCtrlListBinding.java:500)
     at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:749)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)

How to make a field in selection screen as READ_ONLY !!

Hi,
   How to make a field in selection screen as READ_ONLY !!.
Thanks,
Senthil

This is the code you need to have in your program.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'MYSELFLD'.
    SCREEN-INPUT = 0.
    MODIFY-SCREEN.
ENDIF.
ENDLOOP.

How to make required field on selection screen in Query

i'm now working with query(SQ01).
but don't know how to make required field on selection screen in Query.
thanks in advance

i'm now working with query(SQ01).
but don't know how to make required field on selection screen in Query.
thanks in advance

How to make Nokia Suite remember the position and ...

how to make Nokia Suite remember the position and the size i set it?
because everytime i start it, it defaults in the middle of the screen and in the smallest possible size.
Nokia Suite 3.3.86
Windows Vista
Greece Nokia X6 RM-559 v40.0.002

Again, are you talking about genuine Nokia firmware, not any of some 3rd-party customised versions?
For officially released firmware, you may force Nokia Suite to reinstall even if your firmware is already up to date. This feature might be missed in its GUI as its link is "hidden" in the prompt message, not on a button or highlighted with underscore. Try Nokia Suite, once the phone is connected, click the icon of Software Update on the top, then click the word "reinstall" in the prompted message.
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

How to make first row as selected in af:table

Hi,
I am using JDeveloper 11.1.1.4 and ADF-BC in my application.
In all the pages across my application we have multi select enabled for the table[af:table].
But when the pages are displayed,the first row is not selected by default.
My requirement is to display first row as selected across all the tables in my app.
I have the selectionListenerset as for example selectionListener="#{bindings.RSCMapVO2.collectionModel.makeCurrent}" in all the pages.
Please suggest on how to make first row as selected.
Regards,
Praveen

Hi
Put these codes in your selection listner method(You have to define a selectionListner method in your backing bean and put this code segment
(Special thanks go to Franks how posted this code segment. threadID=1089583)
RichTable yourTable = (RichTable) selectionEvent.getSource();
//the Collection Model is the object that provides the structured data
//for the table to render
CollectionModel yourTableModel = (CollectionModel) yourTable.getValue();
//the ADF object that implements the CollectionModel is JUCtrlHierBinding. It
//is wrapped by the CollectionModel API
JUCtrlHierBinding yourTableBinding = (JUCtrlHierBinding) yourTableModel.getWrappedData();
//Acess the ADF iterator binding that is used with ADF table binding
DCIteratorBinding yourTableIteratorBinding = yourTableeBinding.getDCIteratorBinding();
//the role of this method is to synchronize the table component selection
//with the selection in the ADF model
Object _selectedRowData = yourTable.getSelectedRowData();
//cast to JUCtrlHierNodeBinding, which is the ADF object that represents
//a row
JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding) selectedRowData;
//get the row key from the node binding and set it as the current row in the
//iterator
Key rwKey = nodeBinding.getRowKey();
tableIteratorBinding.setCurrentRowWithKey(rwKey.toStringFormat(true));
Thanks
Padma

How to make iTunes read the song's name/singer from the file's name itself?

Hi everyone,
So I have this file with songs from everywhere. I spent quite some time now to make sure that the structure of each file's name is as such : "Singer - Song name", hoping that everything would be read by iTunes accordingly. However, either iTunes read it well, or it didn't read it at all ("Singer - Song name" appearing in Title alone), or iTunes read the "media" of the file (ie. what the guy I downloaded it from wrote for it in the Preferences, which usually is in capital letters or with a bunch of weird underscores). As I'm OCD and need everything to be neat, I'm highly tensed right now. I really want everything to be neat and clear!
So, how do I make sure that iTunes reads the files' names such that it knows the structure is "Singer - Song name"? Thanks.

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

How to make JScrollpane not to fetch data while scrollbar is adjusting?

how to make JScrollpane not to fetch data while scrollbar is adjusting?
Hi,
I need to make the jscrollpane get data only when the scrollbar stops scrolling.
for instance if I hold the scrollbar's thumb and drag it to pass 1000 records, I want the view to wait until I release the thumb before taking any action( ex. adjust the view). in other words if the value of getValueIsAdjusting() of scrollbar is true, then the jscrollpsne should wait until it changes to false before doing anything. this is the same approach that Outlook takes when browsing through the list of emails in your mailbox.
I don't know how to solve this issue. any help regarding this issue would be appreciated.
thanks
Saba

You are planning to mention your cross-post(s) somewhere in this post, correct?

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir

How to make a row as selected in output internal table in oops ALV

Hi All,
I have ALV grid output using oops ALV concept, in my output i have a checkbox as first column when i select this checkbox and press a push button 'Print' which is there above ALV grid that particular line in output table should get selected and i need to code some logic for printing selected row.
how to make the particluar row in the output internal table to be selected and where to write the logic for print once it is pressed?
Thanks in advance
Srilakshmi.

but the checkbox is not getting set in internal table when i select some checkboxes.
can anybody explain y the checkbox in internal table not set?
Hi Srilakshmi,
As explained by Uwe, when we change a field ( say check box ) in ALV grid, the view (frontend) changes (showing the tick mark) but the changed data ( normally ) is not transfered to the backend.
We can initiate this data transfer by just registering the cl_gui_alv_grid=>mc_evt_modified edit event
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_modified ). " This does the trick
Now as soon as we check a checkbox, the data_changed event is triggered.
This initiates data transfer to the backend and the checkbox field in internal table is updated.
check the below code for example.
DATA: go_cont            TYPE REF TO cl_gui_custom_container,
      go_grid            TYPE REF TO cl_gui_alv_grid,
      gt_fieldcat        TYPE lvc_t_fcat,
      gv_language        TYPE spras VALUE 'E',
      gt_outtab          TYPE TABLE OF bus_loca_demo WITH HEADER LINE.
START-OF-SELECTION.
CALL SCREEN 100.
*       MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'BASIC'.
SET TITLEBAR '001'.
PERFORM create_and_init_alv CHANGING gt_outtab[]
                                       gt_fieldcat.
ENDMODULE.                    "pbo OUTPUT
*       MODULE PAI INPUT                                              *
MODULE pai INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'PRINT'.
      BREAK-POINT.
ENDCASE.
ENDMODULE.                    "pai INPUT
FORM create_and_init_alv CHANGING pt_outtab LIKE gt_outtab[]
                                  pt_fieldcat TYPE lvc_t_fcat.
CHECK go_cont IS NOT BOUND.
CREATE OBJECT go_cont
    EXPORTING
      container_name = 'CUSTOM'.
CREATE OBJECT go_grid
    EXPORTING
      i_parent = go_cont.
PERFORM build_display_table.
PERFORM build_fieldcat CHANGING pt_fieldcat.
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_modified ). " This does the trick
ENDFORM.                               "CREATE_AND_INIT_ALV
FORM build_display_table.
FREE gt_outtab.
DO 10 TIMES.
    gt_outtab-creation_partner = sy-index.
    gt_outtab-date_field       = sy-datum.
    APPEND gt_outtab.
ENDDO.
ENDFORM.                               "build_display_table
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'BUS_LOCA_DEMO'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
    CASE ls_fcat-fieldname.
      WHEN 'CHECKBOX'.
        ls_fcat-checkbox = 'X'.
        ls_fcat-edit     = abap_true.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'ENTER_FIELD' OR 'DBLCLICK_FIELD'.
        ls_fcat-no_out = abap_true.
        MODIFY pt_fieldcat FROM ls_fcat.
    ENDCASE.
ENDLOOP.
ENDFORM.                               "build_fieldcat
Cheers,
Jose.

How do I add a website to remember the password after I have been to it before? I didn't know how to make the website remember the password initially.

I want to have firefox remember a password on some sites that I have already been to previously. When it asked me initially, I didn't know how to make it remember. Now I would like for it to remember that site. Please explain how to do this.

If you clicked "Never" then you have created an exception that you need to remove.<br />
Otherwise Firefox should offer to store the name and password on the next visit when you sign on.
Remove site(s) from the Exceptions:
* Firefox/Tools > Options > Security: Passwords: Exceptions
*https://support.mozilla.org/kb/make-firefox-remember-usernames-and-passwords
*http://kb.mozillazine.org/User_name_and_password_not_remembered

How to make columns in the select list dynamic

Hi
I need to make columns in the select query dynamic.I have three tables.Table 1 contains master information lets say name of group(A group consists of members of various skill sets) and its period(A group is of specific period lets say for 18 months).Table 2 contains different skill sets corresponding to a group i.e there is one to many relationship between table 1 and table 2.Table 3 contains months information of skill sets.For example if skill set 1 is required for 5 months then there will be 5 rows(for each month) in table 3 corresponding to a skill set i.e there is again one to many relationship between table 2 and table 3.Tabale 3 will also contain man month value for perticular month.I need to show all the periods of a group and its sum of man month value for all skill sets.
If group1 is of 6 months (starts nov2006 and ends Apr2007) and has 5 skill sets then there will be one entry in table 1 and 5 entry in table 2(For skill set).For each entry in table 2 there will be 6 entry in table 3(for each month).I need to write a query which would display
Group name nov2006 dec2006 jan2007 feb2007 mar2007 apr2007
Gr1 10 15 21 17 18 22--These are sum of man month of all skill set for a particular groupIf Gr 2 is of 9 months then it would disply all the information in respective months.i.e for group 2 nine months information and group 1 six months information
Pls help
Thanks in advance
Sas

Hi,
From your requirement, we understand that you want to make Rows in table 3 as Columns.
Please search pivot in this Forum.
Regards
K.Rajkumar

How to make slicer to remember selected values while moving from report to another

Similar Messages

Maybe you are looking for