How to make smartform get data from report painter???

hi all!
please tell me how to get data from report painter?
i has a report painter zabc ( create through t-code ke31).
I want get data from Zabc after run and show data by smartform.
plz help me!
thanks

Hi ,
Please check this link [SMARTFORM|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
Regards,
Smart

Similar Messages

How can I periodicaly get data from a CAN interface that works in "Transmit by response" mode??

Hello Again!
I am a very new user of LabView, and last week I got the order to implement a Comunication with a CAN interface.
I am trying to get Information from a CAN interface, that works as a "slave", as it is said in the very short handbook. This means it only responds, when it is asked to.
As i want to get the 20 different datas periodicaly it would be fine to do this in a kind of loop. This means:
-tell the interface to send data1
-read data 1
-tell the interface to send data 2
Are there any examples or ideas, how to create similar loops?
As I am absolutely no expert in computing, it would be nice if you answer with very little technical terms...
Thanks RT

Hi RT,
Try the attached example, which writes a remote frame to your slave and reads the response. It is doing this 20 times in a for loop and a specified timing.
Hope that helps.
DirkW
Attachments:
CAN Receive Periodic using Remote.vi ‏97 KB

Downloading data from report painter report in background

Hi Guy,
I have a requirement where in have to schedule the job and download the data on application server from report which is been written report writter. there is an option to save the export paramater but i can download it only in forground.
Any one have any idea on this...or the other idea is to run the function and get the values from report written in report writer ...so i can use it in my program and download.
Atul

Hi,
If you run program in Background job sheduled then goto Spool - > there you can file your report - You can download that report.
Regards
Md.MahaboobKhan

Final data from report painter

hi experts,
i dont hv knowledge on report painter but i need to grab the data from it urgently.
how do i know what is the internal table that stores the final data result...
pls advise..
thanks

Hi,
We don't use the Internal table in Report painter/writer.
We use the tables like CCSS and COFIT for FI/CO data reporting.
It have Rows and Columns that are to be designed using Characteristics and key Figures.
So it is completely different from general reporting.
Go through the sap Doc or the link below for further details.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Regards,
Anji
Message was edited by:
Anji Reddy Vangala

How to post and get data from server using Get Webrequest

Hi:-)
I'm trying to send a username and password argument my server and the server is suppose to send some string back. The following code, that I got of the web, just dies. I think this line:
HttpWebRequestpreq = result.AsyncState
asHttpWebRequest;
is null. Can you kindly fix this for me? Thank you in advance:-)
notes: I have a few textboxes with the values for the request params
I'm targeting Windows Phone 8.0 and Windows Phone 8.1 devices
privatevoidBtnSignUpSubmit_Tab(objectsender,
RoutedEventArgse)
//show error if Username == Username
if(TbUN.Text.ToString() ==
"Username")
MessageBox.Show("You
must fill in your Username in the Username textbox.\nThank you.");
return;
//make sure all fields are filled in
if(TbUN.Text.ToString() ==
""|| TbPW.Text.ToString()
== ""|| TbCPW.Text.ToString()
== "")
MessageBox.Show("All
fields must be filled in.\nThank you.");
return;
//make sure Password is the same as Confirm Password
if(TbPW.Text.CompareTo(TbCPW.Text) !=
0)
MessageBox.Show("Your
Password should be the same as Confirm Password.\nThank you.");
return;
//make sure Username contains valid characters
boolbValid = IsUsernameValid(TbUN.Text);
if(bValid)
                bSignUp =
true;
//disable textboxes
                TbUN.IsEnabled =
false;
                TbPW.IsEnabled =
false;
                TbCPW.IsEnabled =
false;
                TbEmail.IsEnabled =
false;
                BtnSignUpSubmit.IsEnabled =
false;
                title.Text =
"requesting...";
//make Post request top-server
//add parameters
stringdata =
"username="+TbUN.Text+"&Password="+TbPW.Text;
if(TbEmail.Text.Contains("@")
&& TbEmail.Text.Contains("."))
                    data +=
"&email="+ TbEmail.Text;
                System.
UriURL =
newUri("http://www.iclips.co.za/RegisterUsernameAndPassword.php");
WebRequestwebRequest =
WebRequest.Create(URL);
                webRequest.Method =
"POST";
                webRequest.ContentType =
"application/x-www-form-urlencoded";
                webRequest.ContentLength = data.Length;
//we first obtain an input stream to which to write the body of the HTTP POST
                webRequest.BeginGetRequestStream((
IAsyncResultresult) =>
HttpWebRequestpreq = result.AsyncState
asHttpWebRequest;
if(preq !=
null)
StreampostStream = preq.EndGetRequestStream(result);
//guess one could just accept a byte[] [via function argument] for arbitrary data types - images, audio,...
byte[] dataStream =
Encoding.UTF8.GetBytes(data);
                        postStream.Write(dataStream, 0, dataStream.Length);
                        postStream.Close();
//we can then finalize the request...
                        preq.BeginGetResponse((
IAsyncResultfinal_result) =>
HttpWebRequestreq = final_result.AsyncState
asHttpWebRequest;
if(req !=
null)
try
//we call the success callback as long as we get a response stream
WebResponseresponse = req.EndGetResponse(final_result);
                                    success_callback(response.GetResponseStream());
catch(WebExceptionwe)
//otherwise call the error/failure callback
                                    error_callback(we.Message);
return;
                        }, preq);
                }, URL);
privatevoiderror_callback(stringp)
if(bSignUp)
                bSignUp =
false;
// Show error message
MessageBox.Show("Connection
Error!\n\n"+ p);
//enable input
//disable textboxes
                TbUN.IsEnabled =
true;
                TbPW.IsEnabled =
true;
                TbCPW.IsEnabled =
true;
                TbEmail.IsEnabled =
true;
                BtnSignUpSubmit.IsEnabled =
false;
                title.Text =
"try again";
privatevoidsuccess_callback(Streamstream)
if(bSignUp)
                bSignUp =
false;
// Open the stream using a StreamReader for easy access.
StreamReaderreader =
newStreamReader(stream);
// Read the content.
stringresponse = reader.ReadToEnd();
// Display the content.
MessageBox.Show(response);
// Clean up the streams.
                reader.Close();

// Directives
using System;
using System.Collections.Generic;
using System.Linq;
using System.Net;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Navigation;
using Microsoft.Phone.Controls;
using Microsoft.Phone.Shell;
using iClips.Resources;
using System.ComponentModel;
using System.Threading;
using System.IO;
using System.IO.IsolatedStorage;
using Microsoft.Devices;
using System.Windows.Media;
using Microsoft.Xna.Framework.Media;
using System.Windows.Media.Imaging;
using System.Threading.Tasks;
using System.Text;
using Windows.Storage;
using System.Windows.Threading;
using System.Diagnostics;
using System.Globalization;
namespace iClips
public partial class MainPage : PhoneApplicationPage
Boolean bSignUp;
HyperlinkButton BtnSignIn, BtnSignUp, BtnSignUpSubmit;
TextBox TbUN, TbPW, TbCPW, TbEmail;
TextBlock un, title;
System.DateTime startTime;
// Viewfinder for capturing video.
private VideoBrush videoRecorderBrush;
// Source and device for capturing video.
private CaptureSource captureSource;
private CaptureDevice vcDevice;
double w, h;
// File details for storing the recording.
private IsolatedStorageFileStream isoVideoFile;
private FileSink fileSink;
private string isoVideoFileName = "CameraMovie.mp4";
// For managing button and application state.
private enum ButtonState { Initialized, Stopped, Ready, Recording, Playback, Paused, NoChange, CameraNotSupported };
private ButtonState currentAppState;
//create reference to SocketClient
SocketClient sock = new SocketClient();
// Constructor
public MainPage()
InitializeComponent();
//setup recording
// Prepare ApplicationBar and buttons.
PhoneAppBar = (ApplicationBar)ApplicationBar;
PhoneAppBar.IsVisible = true;
StartRecording = ((ApplicationBarIconButton)ApplicationBar.Buttons[0]);
StopPlaybackRecording = ((ApplicationBarIconButton)ApplicationBar.Buttons[1]);
StartPlayback = ((ApplicationBarIconButton)ApplicationBar.Buttons[2]);
PausePlayback = ((ApplicationBarIconButton)ApplicationBar.Buttons[3]);
//display a welcome message
txtDebug.Text = "Welcome to iClips.";
string result = sock.Connect("197.189.214.116", 5000);
txtOutput.Text = result;
if(result.Contains("success")){
sock.Send("#testing_");
SetScreenResolution();
//set image on load friends
/*Uri uri = new Uri("/Assets/home_icons/myFriends.png", UriKind.Relative);
BitmapImage imgSource = new BitmapImage(uri);
Image image = new Image();
image.Source = imgSource;
load_friends.Content = image;*/
SignIn();
private void SignIn()
// remove all elements inside sign grid
for (int index = MyGrid.Children.Count - 1; index >= 0; index--)
MyGrid.Children.RemoveAt(index);
BtnSignIn = new HyperlinkButton();
BtnSignIn.Content = "<< Sign In >>";
BtnSignIn.Click += new RoutedEventHandler(SignIn_Tab);
BtnSignIn.VerticalAlignment = VerticalAlignment.Bottom;
BtnSignUp = new HyperlinkButton();
BtnSignUp.Content = "<< I'm new here. Sign Up. >>";
BtnSignUp.Click += new RoutedEventHandler(SignUp_Tab);
BtnSignUp.VerticalAlignment = VerticalAlignment.Bottom;
un = new TextBlock();
un.Text = "Enter your Username:";
un.VerticalAlignment = VerticalAlignment.Bottom;
un.HorizontalAlignment = HorizontalAlignment.Center;
TextBlock pw = new TextBlock();
pw.Text = "Enter your Password:";
pw.VerticalAlignment = VerticalAlignment.Bottom;
pw.HorizontalAlignment = HorizontalAlignment.Center;
//setup username textbox
TbUN = new TextBox();
TbUN.Opacity = 0.5;
TbUN.Text = "";
TbUN.FontSize = 16;
TbUN.FontWeight = FontWeights.ExtraBold;
TbUN.Foreground = new SolidColorBrush(Colors.Black);
TbUN.Background = new SolidColorBrush(Colors.Transparent);
TbUN.VerticalAlignment = VerticalAlignment.Top;
TbUN.Height = 70;
TbUN.Tap += TbUN_Tap;
//setup password textbox
TbPW = new TextBox();
TbPW.Opacity = 0.5;
TbPW.Text = "";
TbPW.FontSize = 16;
TbPW.FontWeight = FontWeights.ExtraBold;
TbPW.Foreground = new SolidColorBrush(Colors.Black);
TbPW.Background = new SolidColorBrush(Colors.Transparent);
TbPW.VerticalAlignment = VerticalAlignment.Top;
TbPW.Height = 70;
TbPW.Tap += TbPW_Tap;
//Show the background color of MyGrid
MyGrid.Background = new SolidColorBrush(Colors.Blue);
// Create Row for Username Textblock
RowDefinition gridRow0 = new RowDefinition();
gridRow0.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow0);
// Create Row for Username
RowDefinition gridRow1 = new RowDefinition();
gridRow1.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow1);
//create row for password Textblock
RowDefinition gridRow2a = new RowDefinition();
gridRow2a.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2a);
//create row for password
RowDefinition gridRow2 = new RowDefinition();
gridRow2.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2);
//create row for << Sign In >>
RowDefinition gridRow3 = new RowDefinition();
gridRow3.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow3);
//create row for << Sign Up >>
RowDefinition gridRow4 = new RowDefinition();
gridRow4.Height = new GridLength(120);
MyGrid.RowDefinitions.Add(gridRow4);
Grid.SetRow(un, 0);
Grid.SetColumn(un, 0);
Grid.SetRow(TbUN, 1);
Grid.SetColumn(TbUN, 0);
Grid.SetRow(pw, 2);
Grid.SetColumn(pw, 0);
Grid.SetRow(TbPW, 3);
Grid.SetColumn(TbPW, 0);
Grid.SetRow(BtnSignIn, 4);
Grid.SetColumn(BtnSignIn, 0);
Grid.SetRow(BtnSignUp, 5);
Grid.SetColumn(BtnSignUp, 0);
MyGrid.Children.Add(un);
MyGrid.Children.Add(TbUN);
MyGrid.Children.Add(pw);
MyGrid.Children.Add(TbPW);
MyGrid.Children.Add(BtnSignIn);
MyGrid.Children.Add(BtnSignUp);
private void SignUp_Tab(object sender, RoutedEventArgs e)
MessageBox.Show("Welcome to Sign up.\n\nYou need 3 things to create an account:\n1. A unique Case-Sensitive Username. ex 'iClips' is not the same as 'Iclips'\n2. A password to secure you account. \n3. A profile photo for easy recognition.\nThank you.");
// remove all elements inside sign grid
for (int index = MyGrid.Children.Count - 1; index >= 0; index--)
MyGrid.Children.RemoveAt(index);
//repopulate grid with Sign Up elements
//create title
title = new TextBlock();
title.Text = "--- Sign Up 1/2 ---";
title.VerticalAlignment = VerticalAlignment.Top;
title.HorizontalAlignment = HorizontalAlignment.Center;
//field for Username
TbUN = new TextBox();
TbUN.Opacity = 0.5;
TbUN.Text = "Username";
TbUN.FontSize = 16;
TbUN.FontWeight = FontWeights.ExtraBold;
TbUN.Foreground = new SolidColorBrush(Colors.Black);
TbUN.Background = new SolidColorBrush(Colors.Transparent);
TbUN.VerticalAlignment = VerticalAlignment.Top;
TbUN.Height = 70;
TbUN.Tap += TbUN_Tap;
//field for Password
TbPW = new TextBox();
TbPW.Opacity = 0.5;
TbPW.Text = "Password";
TbPW.FontSize = 16;
TbPW.FontWeight = FontWeights.ExtraBold;
TbPW.Foreground = new SolidColorBrush(Colors.Black);
TbPW.Background = new SolidColorBrush(Colors.Transparent);
TbPW.VerticalAlignment = VerticalAlignment.Top;
TbPW.Height = 70;
TbPW.Tap += TbPW_Tap;
//field Confirm for Password
TbCPW = new TextBox();
TbCPW.Opacity = 0.5;
TbCPW.Text = "Confirm Password";
TbCPW.FontSize = 16;
TbCPW.FontWeight = FontWeights.ExtraBold;
TbCPW.Foreground = new SolidColorBrush(Colors.Black);
TbCPW.Background = new SolidColorBrush(Colors.Transparent);
TbCPW.VerticalAlignment = VerticalAlignment.Top;
TbCPW.Height = 70;
TbCPW.Tap += TbCPW_Tap;
//field for Optional Email
TbEmail = new TextBox();
TbEmail.Opacity = 0.5;
TbEmail.Text = "Email (Optional)";
TbEmail.FontSize = 16;
TbEmail.FontWeight = FontWeights.ExtraBold;
TbEmail.Foreground = new SolidColorBrush(Colors.Black);
TbEmail.Background = new SolidColorBrush(Colors.Transparent);
TbEmail.VerticalAlignment = VerticalAlignment.Top;
TbEmail.Height = 70;
TbEmail.Tap += TbEmail_Tap;
HyperlinkButton BtnGoBack = new HyperlinkButton();
BtnGoBack.Content = "<< Go Back ";
BtnGoBack.Click += new RoutedEventHandler(BtnGoBack_Tab);
BtnGoBack.VerticalAlignment = VerticalAlignment.Bottom;
BtnSignUpSubmit = new HyperlinkButton();
BtnSignUpSubmit.Content = "<< Sign Up >>";
BtnSignUpSubmit.Click += new RoutedEventHandler(BtnSignUpSubmit_Tab);
BtnSignUpSubmit.VerticalAlignment = VerticalAlignment.Bottom;
// Create Row for title
RowDefinition gridRow0 = new RowDefinition();
gridRow0.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow0);
// Create Row for Username
RowDefinition gridRow1 = new RowDefinition();
gridRow1.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow1);
//create row for password Textblock
RowDefinition gridRow2a = new RowDefinition();
gridRow2a.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2a);
//create row for Confirm password
RowDefinition gridRow2 = new RowDefinition();
gridRow2.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow2);
//create row for email
RowDefinition gridRow3 = new RowDefinition();
gridRow3.Height = new GridLength(60);
MyGrid.RowDefinitions.Add(gridRow3);
//create row for << Sign Up >>
RowDefinition gridRow4 = new RowDefinition();
gridRow4.Height = new GridLength(120);
MyGrid.RowDefinitions.Add(gridRow4);
//create row for << Go Back >>
RowDefinition gridRow5 = new RowDefinition();
gridRow5.Height = new GridLength(120);
MyGrid.RowDefinitions.Add(gridRow5);
Grid.SetRow(title, 0);
Grid.SetColumn(title, 0);
Grid.SetRow(TbUN, 1);
Grid.SetColumn(TbUN, 0);
Grid.SetRow(TbPW, 2);
Grid.SetColumn(TbPW, 0);
Grid.SetRow(TbCPW, 3);
Grid.SetColumn(TbCPW, 0);
Grid.SetRow(TbEmail, 4);
Grid.SetColumn(TbEmail, 0);
Grid.SetRow(BtnSignUpSubmit, 5);
Grid.SetColumn(BtnSignUpSubmit, 0);
Grid.SetRow(BtnGoBack, 6);
Grid.SetColumn(BtnGoBack, 0);
MyGrid.Children.Add(title);
MyGrid.Children.Add(TbUN);
MyGrid.Children.Add(TbPW);
MyGrid.Children.Add(TbCPW);
MyGrid.Children.Add(TbEmail);
MyGrid.Children.Add(BtnSignUpSubmit);
MyGrid.Children.Add(BtnGoBack);
BtnSignUp.Content = "<< Sign Up >>";
private bool IsUsernameValid(string str)
int d;
if (str.Length > 30)
MessageBox.Show("You may only use a maximum of 30 characters for your Username.\nThank you.");
return false;
for (d = 0; d < str.Length; d++)
if (str.Contains("~") || str.Contains("!") || str.Contains("@") || str.Contains("$")
|| str.Contains("#") || str.Contains("%") || str.Contains("|") || str.Contains("_"))
MessageBox.Show("Your Username may not contain any of the follwing characters: \n~ ! @ # $ % | _\nThank you.");
return false;
return true;
private void BtnSignUpSubmit_Tab(object sender, RoutedEventArgs e)
//show error if Username == Username
if (TbUN.Text.ToString() == "Username")
MessageBox.Show("You must fill in your Username in the Username textbox.\nThank you.");
return;
//make sure all fields are filled in
if (TbUN.Text.ToString() == "" || TbPW.Text.ToString() == "" || TbCPW.Text.ToString() == "")
MessageBox.Show("All fields must be filled in.\nThank you.");
return;
//make sure Password is the same as Confirm Password
if (TbPW.Text.CompareTo(TbCPW.Text) != 0)
MessageBox.Show("Your Password should be the same as Confirm Password.\nThank you.");
return;
//make sure Username contains valid characters
bool bValid = IsUsernameValid(TbUN.Text);
if (bValid)
bSignUp = true;
//disable textboxes
TbUN.IsEnabled = false;
TbPW.IsEnabled = false;
TbCPW.IsEnabled = false;
TbEmail.IsEnabled = false;
BtnSignUpSubmit.IsEnabled = false;
title.Text = "requesting...";
//make Post request top-server
//add parameters
string data = "username="+TbUN.Text+"&Password="+TbPW.Text;
if(TbEmail.Text.Contains("@") && TbEmail.Text.Contains("."))
data += "&email=" + TbEmail.Text;
System.Uri URL = new Uri("http://www.iclips.co.za/RegisterUsernameAndPassword.php");
WebRequest webRequest = WebRequest.Create(URL);
webRequest.Method = "POST";
webRequest.ContentType = "application/x-www-form-urlencoded";
webRequest.ContentLength = data.Length;
//we first obtain an input stream to which to write the body of the HTTP POST
webRequest.BeginGetRequestStream((IAsyncResult result) =>
HttpWebRequest preq = result.AsyncState as HttpWebRequest;
if (preq != null)
Stream postStream = preq.EndGetRequestStream(result);
//guess one could just accept a byte[] [via function argument] for arbitrary data types - images, audio,...
byte[] dataStream = Encoding.UTF8.GetBytes(data);
postStream.Write(dataStream, 0, dataStream.Length);
postStream.Close();
//we can then finalize the request...
preq.BeginGetResponse((IAsyncResult final_result) =>
HttpWebRequest req = final_result.AsyncState as HttpWebRequest;
if (req != null)
try
//we call the success callback as long as we get a response stream
WebResponse response = req.EndGetResponse(final_result);
success_callback(response.GetResponseStream());
catch (WebException we)
//otherwise call the error/failure callback
error_callback(we.Message);
return;
}, preq);
}, URL);
private void error_callback(string p)
if (bSignUp)
bSignUp = false;
// Show error message
MessageBox.Show("Connection Error!\n\n" + p);
//enable input
//disable textboxes
TbUN.IsEnabled = true;
TbPW.IsEnabled = true;
TbCPW.IsEnabled = true;
TbEmail.IsEnabled = true;
BtnSignUpSubmit.IsEnabled = false;
title.Text = "try again";
private void success_callback(Stream stream)
if (bSignUp)
bSignUp = false;
// Open the stream using a StreamReader for easy access.
StreamReader reader = new StreamReader(stream);
// Read the content.
string response = reader.ReadToEnd();
// Display the content.
MessageBox.Show(response);
// Clean up the streams.
reader.Close();
private void BtnGoBack_Tab(object sender, RoutedEventArgs e)
SignIn();
private void TbEmail_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbEmail.SelectAll();
private void TbCPW_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbCPW.SelectAll();
private void SignIn_Tab(object sender, RoutedEventArgs e)
if (TbUN.Text.ToString() == "" || TbPW.Text.ToString() == "")
MessageBox.Show("Your Username or Password cannot be empty.\nThank you.");
return;
private void TbUN_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbUN.SelectAll();
un.Text = "Usernames are Case-Sensitive.\n'Iclips' is not the same as 'iClips'.";
private void TbPW_Tap(object sender, System.Windows.Input.GestureEventArgs e)
TbPW.SelectAll();
protected override void OnNavigatedTo(NavigationEventArgs e)
base.OnNavigatedTo(e);
// Initialize the video recorder.
InitializeVideoRecorder();
CameraButtons.ShutterKeyHalfPressed += OnButtonHalfPress;
// The event is fired when the shutter button receives a full press.
CameraButtons.ShutterKeyPressed += OnButtonFullPress;
// The event is fired when the shutter button is released.
CameraButtons.ShutterKeyReleased += OnButtonRelease;
protected override void OnNavigatedFrom(NavigationEventArgs e)
// Dispose of camera and media objects.
DisposeVideoPlayer();
DisposeVideoRecorder();
base.OnNavigatedFrom(e);
CameraButtons.ShutterKeyHalfPressed -= OnButtonHalfPress;
CameraButtons.ShutterKeyPressed -= OnButtonFullPress;
CameraButtons.ShutterKeyReleased -= OnButtonRelease;
// Ensure that the viewfinder is upright in LandscapeRight.
protected override void OnOrientationChanged(OrientationChangedEventArgs e)
if (vcDevice != null)
if (e.Orientation == PageOrientation.LandscapeLeft)
txtDebug.Text = "LandscapeLeft";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 90 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.PortraitUp)
txtDebug.Text = "PortraitUp";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 0 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 0;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = 0;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.LandscapeRight)
txtDebug.Text = "LandscapeRight";
// Rotate for LandscapeRight orientation.
//videoRecorderBrush.RelativeTransform =
//new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 180 };
//rotate logo
if (logo != null)
RotateTransform rt = new RotateTransform();
rt.Angle = -90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
logo.RenderTransformOrigin = new Point(0.5, 0.5);
logo.RenderTransform = rt;
//rotate sign in link
if (MyGrid != null)
RotateTransform rt = new RotateTransform();
rt.Angle = -90;
//default rotation is around top left corner of the control,
//but you sometimes want to rotate around the center of the control
//to do that, you need to set the RenderTransFormOrigin
//of the item you're going to rotate
//I did not test this approach, maybe You're going to need to use actual coordinates
//so this bit is for information purposes only
MyGrid.RenderTransformOrigin = new Point(0.5, 0.5);
MyGrid.RenderTransform = rt;
if (e.Orientation == PageOrientation.PortraitDown)
txtDebug.Text = "PortraitDown";
videoRecorderBrush.RelativeTransform =
new CompositeTransform() { CenterX = 0.5, CenterY = 0.5, Rotation = 270 };
// Provide auto-focus with a half button press using the hardware shutter button.
private void OnButtonHalfPress(object sender, EventArgs e)
// Focus when a capture is not in progress.
try
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "Half Button Press: Auto Focus";
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
// Capture the image with a full button press using the hardware shutter button.
private void OnButtonFullPress(object sender, EventArgs e)
// Focus when a capture is not in progress.
try
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "Full Button Press: Auto Focus";
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
// Cancel the focus if the half button press is released using the hardware shutter button.
private void OnButtonRelease(object sender, EventArgs e)
try
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "Shutter is released: Auto Focus";
catch (Exception focusError)
// Cannot focus when a capture is in progress.
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = focusError.Message;
// Update the buttons and text on the UI thread based on app state.
private void UpdateUI(ButtonState currentButtonState, string statusMessage)
// Run code on the UI thread.
Dispatcher.BeginInvoke(delegate
switch (currentButtonState)
// When the camera is not supported by the phone.
case ButtonState.CameraNotSupported:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// First launch of the application, so no video is available.
case ButtonState.Initialized:
StartRecording.IsEnabled = true;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// Ready to record, so video is available for viewing.
case ButtonState.Ready:
StartRecording.IsEnabled = true;
StopPlaybackRecording.IsEnabled = false;
StartPlayback.IsEnabled = true;
PausePlayback.IsEnabled = false;
break;
// Video recording is in progress.
case ButtonState.Recording:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = false;
break;
// Video playback is in progress.
case ButtonState.Playback:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = false;
PausePlayback.IsEnabled = true;
break;
// Video playback has been paused.
case ButtonState.Paused:
StartRecording.IsEnabled = false;
StopPlaybackRecording.IsEnabled = true;
StartPlayback.IsEnabled = true;
PausePlayback.IsEnabled = false;
break;
default:
break;
// Display a message.
txtDebug.Text = statusMessage;
// Note the current application state.
currentAppState = currentButtonState;
public void InitializeVideoRecorder()
if (captureSource == null)
// Create the VideoRecorder objects.
captureSource = new CaptureSource();
fileSink = new FileSink();
vcDevice = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice();
// Add eventhandlers for captureSource.
captureSource.CaptureFailed += new EventHandler<ExceptionRoutedEventArgs>(OnCaptureFailed);
// Initialize the camera if it exists on the phone.
if (vcDevice != null)
// Create the VideoBrush for the viewfinder.
videoRecorderBrush = new VideoBrush();
videoRecorderBrush.SetSource(captureSource);
// Display the viewfinder image on the rectangle.
viewfinderRectangle.Fill = videoRecorderBrush;
// Start video capture and display it on the viewfinder.
captureSource.Start();
// Set the button state and the message.
UpdateUI(ButtonState.Initialized, "Tap record to start recording...");
else
// Disable buttons when the camera is not supported by the phone.
UpdateUI(ButtonState.CameraNotSupported, "A camera is not supported on this phone.");
// Set recording state: start recording.
private void StartVideoRecording()
try
// Connect fileSink to captureSource.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Started)
captureSource.Stop();
// Connect the input and output of fileSink.
fileSink.CaptureSource = captureSource;
fileSink.IsolatedStorageFileName = isoVideoFileName;
// Begin recording.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Stopped)
captureSource.Start();
// Set the button states and the message.
UpdateUI(ButtonState.Recording, "Recording...");
StartTimer();
// If recording fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
//start the timer
private void StartTimer()
dispatcherTimer = new System.Windows.Threading.DispatcherTimer();
dispatcherTimer.Tick += new EventHandler(dispatcherTimer_Tick);
dispatcherTimer.Interval = new TimeSpan(0, 0, 1);
dispatcherTimer.Start();
startTime = System.DateTime.Now;
private void StopTimer()
dispatcherTimer.Stop();
private void dispatcherTimer_Tick(object sender, EventArgs e)
System.DateTime now = System.DateTime.Now;
txtRecTime.Text = now.Subtract(startTime).ToString();
// Set the recording state: stop recording.
private void StopVideoRecording()
try
// Stop recording.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Started)
captureSource.Stop();
// Disconnect fileSink.
fileSink.CaptureSource = null;
fileSink.IsolatedStorageFileName = null;
// Set the button states and the message.
UpdateUI(ButtonState.Stopped, "Preparing viewfinder...");
StopTimer();
StartVideoPreview();
// If stop fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
// Set the recording state: display the video on the viewfinder.
private void StartVideoPreview()
try
// Display the video on the viewfinder.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Stopped)
// Add captureSource to videoBrush.
videoRecorderBrush.SetSource(captureSource);
// Add videoBrush to the visual tree.
viewfinderRectangle.Fill = videoRecorderBrush;
captureSource.Start();
// Set the button states and the message.
UpdateUI(ButtonState.Ready, "Ready to record.");
// If preview fails, display an error.
catch (Exception e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.Message.ToString();
// Start the video recording.
private void StartRecording_Click(object sender, EventArgs e)
// Avoid duplicate taps.
StartRecording.IsEnabled = false;
StartVideoRecording();
// Handle stop requests.
private void StopPlaybackRecording_Click(object sender, EventArgs e)
// Avoid duplicate taps.
StopPlaybackRecording.IsEnabled = false;
// Stop during video recording.
if (currentAppState == ButtonState.Recording)
StopVideoRecording();
// Set the button state and the message.
UpdateUI(ButtonState.NoChange, "Recording stopped.");
// Stop during video playback.
else
// Remove playback objects.
DisposeVideoPlayer();
StartVideoPreview();
// Set the button state and the message.
UpdateUI(ButtonState.NoChange, "Playback stopped.");
// Start video playback.
private void StartPlayback_Click(object sender, EventArgs e)
// Avoid duplicate taps.
StartPlayback.IsEnabled = false;
// Start video playback when the file stream exists.
if (isoVideoFile != null)
VideoPlayer.Play();
// Start the video for the first time.
else
// Stop the capture source.
captureSource.Stop();
// Remove VideoBrush from the tree.
viewfinderRectangle.Fill = null;
// Create the file stream and attach it to the MediaElement.
isoVideoFile = new IsolatedStorageFileStream(isoVideoFileName,
FileMode.Open, FileAccess.Read,
IsolatedStorageFile.GetUserStoreForApplication());
VideoPlayer.SetSource(isoVideoFile);
// Add an event handler for the end of playback.
VideoPlayer.MediaEnded += new RoutedEventHandler(VideoPlayerMediaEnded);
// Start video playback.
VideoPlayer.Play();
// Set the button state and the message.
UpdateUI(ButtonState.Playback, "Playback started.");
// Pause video playback.
private void PausePlayback_Click(object sender, EventArgs e)
// Avoid duplicate taps.
PausePlayback.IsEnabled = false;
// If mediaElement exists, pause playback.
if (VideoPlayer != null)
VideoPlayer.Pause();
// Set the button state and the message.
UpdateUI(ButtonState.Paused, "Playback paused.");
private void DisposeVideoPlayer()
if (VideoPlayer != null)
// Stop the VideoPlayer MediaElement.
VideoPlayer.Stop();
// Remove playback objects.
VideoPlayer.Source = null;
isoVideoFile = null;
// Remove the event handler.
VideoPlayer.MediaEnded -= VideoPlayerMediaEnded;
private void DisposeVideoRecorder()
if (captureSource != null)
// Stop captureSource if it is running.
if (captureSource.VideoCaptureDevice != null
&& captureSource.State == CaptureState.Started)
captureSource.Stop();
// Remove the event handler for captureSource.
captureSource.CaptureFailed -= OnCaptureFailed;
// Remove the video recording objects.
captureSource = null;
vcDevice = null;
fileSink = null;
videoRecorderBrush = null;
// If recording fails, display an error message.
private void OnCaptureFailed(object sender, ExceptionRoutedEventArgs e)
this.Dispatcher.BeginInvoke(delegate()
txtDebug.Text = "ERROR: " + e.ErrorException.Message.ToString();
// Display the viewfinder when playback ends.
public void VideoPlayerMediaEnded(object sender, RoutedEventArgs e)
// Remove the playback objects.
DisposeVideoPlayer();
StartVideoPreview();
public void SetScreenResolution()
w = Application.Current.Host.Content.ActualWidth;
h = Application.Current.Host.Content.ActualHeight;
setResViewF(w, h);
public void setResViewF(double width, double height)
viewfinderRectangle.Width = width;
viewfinderRectangle.Height = height;
resMI.Content = "resolution: " + width + "*" + height;
private void resMI_Click(object sender, RoutedEventArgs e)
switch (resMI.Content.ToString())
case "resolution: 176*220":
setResViewF(240, 320);
break;
case "resolution: 240*320":
setResViewF(360, 480);
break;
case "resolution: 360*480":
setResViewF(480, 800);
break;
case "resolution: 480*800":
setResViewF(1440, 720);
break;
case "resolution: 1440*720":
setResViewF(1920, 1080);
break;
case "resolution: 1920*1080":
setResViewF(176, 220);
break;
default:
setResViewF(176, 220);
break;
public void WriteToFile(string key, string value)
var Iso_settings = System.IO.IsolatedStorage.IsolatedStorageSettings.ApplicationSettings;
if (!Iso_settings.Contains(key))
Iso_settings.Add(key, value);
Iso_settings.Save();//This will save your data in isolated storage.
public string ReadFromFile(string key)
var Iso_settings = System.IO.IsolatedStorage.IsolatedStorageSettings.ApplicationSettings;
if (Iso_settings.Contains(key))
return (string)Iso_settings[key];
else
return null;
public DispatcherTimer dispatcherTimer { get; set; }
private void ToggleZoom(MediaElement media)
if (media.Stretch != Stretch.UniformToFill)
// zoom
media.Stretch = Stretch.UniformToFill;
else
// unzoom
media.Stretch = Stretch.Uniform;
BtnSignUpSubmit_Tab is the HyperLinkButton that would trigger the web request process. I need this code to work perfectly because a lot of people will use this. If you can simplify the http web request that already feels so good. Thank you.

How can a page get data from orace process

Hi all.
i have a process out a cousor .
how apex get the data of the cousor.
report only can get view/table ?????

944378 wrote:
Hi all.Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "944378".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand
i have a process out a cousor .
how apex get the data of the cousor.
report only can get view/table ?????"Cousor"? You mean "REF CURSOR"? (Note that there is a spellchecker available when posting to the forum: click the button marked with "ABC" and a tick.)
APEX does not have native support for basing reports on REF CURSORs.
See +{thread:id=2358877}+
(Always search the forum before posting a question. 98% of questions have been asked and answered before.)

Process Class:How to give and get data from an exe file continuously???

hi,,,
I am trying to run an executable file from my program to give it input and read its output....
And i am having problems...
The exe file takes one input and appends to it "1235" (ITS A TEST CASE).
When it is only for a single input , the program rums perfectly.. but when it is within a loop it does not
Pls help
Here is the code for that EXE file. (its in C)
#include<stdio.h>
int main()
char a[10];
int i;
int k=1235;
while(1){
scanf("%s",a);
if(a[0]=='s')
break;
printf("%s%d\n",a,k);
}Note that when i remove the loop here, my code is able to get and give it data.
My JAVA program::
import java.io.*;
public class Main {
public static void main(String[] args) throws IOException {
        try {
      String line;
      Process p = Runtime.getRuntime().exec
        ("C:\\users\\Untitled3.exe");
       BufferedWriter   out=new BufferedWriter(new OutputStreamWriter(p.getOutputStream()));
          out.write("dfgsfs\n");
          time= java.lang.System.nanoTime();
          out.flush();
      BufferedReader input =new BufferedReader(new InputStreamReader(p.getInputStream()));
     while ((line = input.readLine()) != null) {
        System.out.println(input.readLine());
      input.close();
    catch (Exception err) {
      err.printStackTrace();
}PLS HELP

I see a problem in your C code. You're not flushing stdout after you printf and that usually means java is not seeing whats your C program is printing.
removing the loop probably works because stdout is being flushed right before exit.
I used a perl script to test your stuff and found that flushing made the trick
#!/usr/bin/perl
open(OUTFILE,">>./output.txt");
$| = 1;
while (<STDIN>) {
    if (m/.*error.*/) {
        print STDERR $_;
    } else {
        print STDOUT $_;
    print OUTFILE $_;
    if (m/exit/) {
        last;
close(OUTFILE);
exit;notice "$| =1;" that autoflushes in perl (just in case you were wondering where my flush call went)
Enjoy!

How to get data from subsites list of SharePoint 2010 in ssrs

Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
Kishore

Hi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT

How to get data from a file?

Hello everyone, i'm new to this forum and to java too. Ok, so here is what i want to do:
I want to get data from a file containing words and numbers and store them into variables that i will use them after to insert into a database table. For example i have a file called employees.txt in this form:
eid ename zipcode Hire_date
1000 "Jones" 67226 "12-DEC-95"
In C++ i declare variables for each data and store them, for example in this case:
ifstream in("somefile");
string name, hdate;
int eid, zip;
in >> eid >> ename >> zip >> hdate;
So i want to do the same thing in JAVA but i can't make it work. So, i would appreciate if someone could give me a simple example how to do it. Thank you.

[http://java.sun.com/docs/books/tutorial/essential/io/index.html]

APEX CSS - How do I get data in report columns to wrap?

I found information here http://www.orafaq.com/wiki/APEX_FAQ
About How do I get data in report columns to wrap?
This works and another way to do it is by adding the CSS directly into the
Home>Application Builder>Application 137>Page 1>Report Attributes>Column Attributes page
in the Column Formatting area. I added 'white-space:normal' and this works in FF but in
IE it has a different behavior.
In FireFox
testasdgadhad
gadfadgadgadg
adgafhsrgjsgnsfg
nsdfbadfafhafha
dfhadfh
In Internet Explorer
testasdgadhad gadfadgadgadg adgafhsrgjsgnsfg nsdfbadfafhafha dfhadfh
Is there a way to force it so it display in IE the same way that it displays in FF?
The correct display format is FF.
Thanks,
Nestor :)

I have try this because I found it during a search and it makes no difference in IE.
This is what I am using now 'display: block; width: 100px;max-width:100px;white-space:normal'
I also tried 'display:block; width:500px'
If I use the values 'normal' or 'pre' for white-space' it works in FireFox but not in IE, The display block
does not seem to make a difference. It seems that all I need is 'white-space:normal' but again
it does not works on IE.
Thanks,
Nestor :-)

Get data from a Report Painter

Hello.
Does anyone know how to get data from a Report Painter?
Thanks in advance!

Hi
check the links
Report Writer functions can be accessed from within the Report Painter.
The difference lies in the GUI of the report painter.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Refer the following links :
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Regards
Anji

How to get data from external source

Hi experts,
I want to get data from a different source e.g. from oracle. How can i get the data in BW??
Sam

Hi Samir
there are different interfaces are available according to the source system.
For Oracle source system you can use DB connect interface.
you can extract data from several data sources to BI
File Interface:: Using this interface, you can access files in ASCII format or CSV format
DB Connect :: You use DB Connect to open other database connections in addition to the default connection and use these connections to transfer data from tables or views into a BI system.
UD Connect :: UD Connect (Universal Data Connect) uses the Application Server J2EE connectivity to enable the reporting and analysis of both SAP and non-SAP data. Using UD Connect, you can access all relational and multidimensional data sources. UD Connect transfers the data as flat data.
BI Service API ::
Web Service for Staging ::You use the Web service to write the data from the source into the PSA. The transfer of data is controlled externally, without placing demand on BI.
You can use this interface in conjunction with real-time data acquisition.
Please assign points if this info helps.
Regards
Vivek..

How to get data from crosstab or table?

hi !
i develop my app with bib 9.0.3.1 . To customize my report,i must get data from crosstab or table component (presentation bean) and generate defined XML file ,can you tell me how to do ?

hi paul
the sample code like this:
try{
     DataAccess dataAccess = thinDataview.getModel().getDataAccess();
int rowCount = dataAccess.getEdgeExtent(DataDirector.ROW_EDGE);
int colCount = dataAccess.getEdgeExtent( DataDirector.COLUMN_EDGE );
     for ( int i=0; i<rowCount; i++ )
     for( int j=0; j<colCount; j++ )
               String dataValue = dataAccess.getValue( i,j,DataMap.DATA_UNFORMATTED).toString();
}catch( Exception e ){
System.out.println( e.getMessage() );

How to get Data from B2 Cluster

Hi
I need to write a report which will get data from B2 Cluster.
Please can anyone provide me with the code how to get to the cluster and read from ZL and PT
Thanks in Advance

Ok so far this is what I have done
*& Report ZAKTIME                                                     *
REPORT ZAKTIME                                 .
               Dictionary tables/structures
tables: pernr, pcl2, pcl1.
include rpcxB200.
infotypes: 0001.     "Org. Zuordnung
                      main logic
TOP-OF-PAGE.
START-OF-SELECTION.
        GET PERNR.
        RP-PROVIDE-FROM-LAST P0001 SPACE PNPBEGDA PNPENDDA.
process the data according to the payroll area
   IF PERNR-WERKS EQ P0001-WERKS AND PERNR-BTRTL EQ P0001-BTRTL
      AND PERNR-KOSTL EQ P0001-KOSTL AND PERNR-BUKRS EQ P0001-BUKRS
      AND PERNR-ABKRS EQ P0001-ABKRS AND PERNR-KOKRS EQ P0001-KOKRS.
        PERFORM RETRIEVE_Time.
    ENDIF.
END-OF-SELECTION.
"======================================================================*
                       forms                                         *
"======================================================================*
FORM RETRIEVE_Time.
    B2-key-pernr = PERNR-PERNR.
    RP-IMP-C2-B2.                  "macro resides in table TRMAC
    IF rp-imp-b2-subrc = 0.
    ENDIF.
ENDFORM.                            " RETRIEVE_PAYROLL
Getting the following errors
1. B2-Key_pernr is unknown
2.Bezug is Unknown
3. KNTAG is Unknown
Notice number 2 and 3 is not even in my program....
Also I was trying to pass the value to the parameter. why is this not working...

How to get data from hard drive in dead iMac?

I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

How to make smartform get data from report painter???

Similar Messages

Maybe you are looking for