How to make SQVI report accessible to others?

I know that SQVI is suer specific.
Is there a way that we can make the SQVI query generated by me , avilable to other users.
I do not want to transport it from Development system to production environment.
Thanks,
Ven

Hello,
In transaction SQ01, select the option in the menu Query->Convert Quickview. Then you can mention the SQVI Query name to be converted, New Query Name, Info Set and User Group names. Then a Query will be created and it can be accessed by Users assigned to the User Group.
If you are creating SQVI Query directly in Production, there is no requirement for transport.
Thanks,
Venu

Similar Messages

How to make slow reports fast?

Hi all,
How to make slow reports fast? What could be the various reasons and optimizations/solutions?
Thanks,
Charles.
++++++++++++++++++++++++++++++

Its an on going process. Couple of steps you will have to follow: Did you perform any SQL trace ..?
Did you perform any ABAP trace...?
How much business data these reports are processing.Is there a possibility you can do some changes.
SQL Trace ( SAP in built tool) will give you a fair idea about each and every SQL statements in your report. And you can anlyze bad ones. And also propse optimized SQL or
index if needed.
ABAP Trace(SAP in bulit tool), you can find out amount of ABAP run time thats being elapsed by each and individual abap module.
Also the amount of business data is every important. While designing the report alogorithm this is very important factor.

How to make iPhotos library available to other users

how to make iPhotos library available to other users

To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support article linked below.
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

PL/SQL: How to make a function accessible to all users?

How can I make a function accessible to all users?
I have written a stored function called GET_NET_BALANCE.
I can run it but my users cannot.
I have tried the following, but my users still cannot
run the function:
GRANT EXECUTE ON GET_NET_BALANCE TO PUBLIC;
Thanks, Eileen

Hi,
You can try creating a public synonym on the function so that it is accessible to all.
To get greater response.. please post your question at
PL/SQL
Regards,
Anupama

How to make RDLC report two column

Hello. I have a simple report which is supposed to be used for printing stickers. The sticker paper is A4 size and it has two columns. I successfully managed to print data to left column. I also want to print data to right column too. My current report looks
like this :
[Title]
[NameLastName]
[Address]
How can I make my report to fill data to two columns? Thanks in advance.

Thank you for your response. Here is what I have :
Here is what I need :
Thank you very much.

How to make the report run with urls supplied parameters

I have a report that I send the report's parameters by URL.
How can I make the report automatically run with the parameters supplied?
So when the report opens the user does NOT have to click the "View Report" button the report would just run and display the results for the user?
Thank you for you help.

Take your iPad to the apple store and explain your problem. They won't make you sit there for an hour to reproduce the problem. I took an iPad back a month ago wit h screen problems. They didn't look at the problem, they just exchange it.
Again, Apple won't make you stand on your head to reproduce a problem with one of. their produces.

How to make OBIEE reports available during the DB tables data refresh?

Experts,
We have our production ETL run for 2.5 days every month. OBIEE reports will not be available during the run. We have a requirement to make the reports available all 24 hrs 365 days. So, what we are trying is to copy all the fact/Dim tables to the new schema running in the same or different DB server and amend the connection pool to point this schema during the run. Here are my questions. Is this a workabale solution (or) is there better approach for meeting our requirement
Regards,
Sarvan

I would suggest this option:
Store the following connection pool values in a table and call them in your connection pool using Connection Pool Scripts
Data Source Name
User ID
Pwd
when ever you want to change db just you need to edit these values that would help your bi with no downtime.
You might have to tweak it little bit if needed.
More or less we have use sometime back to a client where they want to switch dbs dev to test to etc
Try it out.
BTW: 2.5 days load time for Full load or Incr?
Edited by: Srini VEERAVALLI on Feb 1, 2013 8:40 AM

How can I make my vi accessible through other vis

How can I be able to open a vi while still in another one.

answer is in this thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=132222
Message Edited by JoeLabView on 07-19-2005 09:39 AM

How to make crosstab report in crystal report

Hi all ,
I want to make a crosstab report in crystal report
my query is like this
select YearDate.year ,
(currentasset.currentaset / currentliability.currentliability ) as CurrentRatio
,(currentasset.currentaset - Inventory.Inventoryaset / currentliability.currentliability ) as QuickRatio
from
select distinct YEAR(JDT1.RefDate) as year from JDT1
)YearDate left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11'
group by YEAR(JDT1.RefDate)
)currentasset on YearDate.year = currentasset.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as Inventoryaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11.05'
group by YEAR(JDT1.RefDate)
)Inventory on YearDate.year = Inventory.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentliability from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '21'
group by YEAR(JDT1.RefDate)
)currentliability on YearDate.year = currentliability.year left join
order by YearDate.year
So if i view the data in sql server it should be like this
Year   CurrentRatio   quickRatio
2006               501                 100
2007              600                  200
2008             700                   300
2009             900                   400
I want to make a crosstab with the column is year . the Year is dynamic according to the selection
So if i select the year from 2007 to 2009
It should be like this in report
2007                2008              2009
CurrentRatio                 600                  700                  900
QuickRatio                    200                   300                 400
How can i make it in Crystal report ?
I have use the template in crosstab crystal report, but there is not suitable.
Can i make manually. ?
Thanks in advance
Regards
KK

Hi kevin,
thanks for your respond . Actually, it's work.
But i have some issue again.
How can i make a grouping
So the grouping per Item
For example
                                                      2006                 2007                 2008
Group 1               Item A                5                        6                       7
                            Item B                7                        8                       9
Group 2              Item C                  9                       0                      0
                           Item D                 8                        8                      9
And another question, Is there always have row summary ? It seems that after the 2008 column, there is a total column, Can I remove this ?
Thanks in advance
regards
KK
Edited by: kah kian on Jun 2, 2011 4:17 PM

How to Make a report from two cubes

Hi, guys,
i'm trying to create a report use the data from two different cubes, but that's a problem. what i want to do is like this:
From Cube A, i want to get the total machine number for each type of machine:
Type machine | Total machine
Type A 10000
Type B 15000
Type C 40000
And from Cube B, i want to get the machine amount which has an error, also group by machine type:
Type machine | Broken machine amount
Type A 50
Type B 15
Type C 100
So what can i do to create a report like below:
Type machine | Broken machine amount | Broken machine ratio(%)
Type A 50 0,5
Type B 150 1
Type C 100 0.25
Thanks a lot,

Hi, Nicolae, use ur idea, i can get the table u show:
Type | Machine amount | cube
Type A 10000 'cube A'
Type B 15000 'cube A'
Type C 40000 'cube A'
Type A 50 'cube B'
Type B 15 'cube B'
Type C 100 'cube B'
but with this table how can i get the table which i want:
Type | Machine amount | % of machine
Type A 50 0.5
Type B 15 0.1
Type C 100 0.25
I have no idea, 2 things in ur idea have to be considered:
1. just show the record of 'cube B'
2. to get the data that cube B machine amount/ cube A machine amount
Need your detail explain, thanks

How to make a report in RME to display all POE capable devices

Hello,
I need to create a report that will list switches in my network that support POE. Most of our switches are 3750 stack and I know most of them have POE capabilities but whenever I generate the report under RME POE Port Level Report or POE Report it gives me an error that says none of the devices are POE capabled/enabled.
Does anyone know how to generate this kind of report? I tried making a template but I still couldn't produce the result that I need.
Thanks in advance.

HI ,
CSCsx15486 Bug Details
RME cannot create Inventory PoE Report for certain switches
Currently, RME is only able to create PoE Inventory reports for Cat3750 and 3560 switches:
WS-C3560-24PS - 1.3.6.1.4.1.9.1.563
WS-C3560-48PS - 1.3.6.1.4.1.9.1.564
WS-C3560G-24PS - 1.3.6.1.4.1.9.1.614
WS-C3560G-48PS - 1.3.6.1.4.1.9.1.616
WS-C3750E-24PD - 1.3.6.1.4.1.9.1.792
WS-C3750E-48PD - 1.3.6.1.4.1.9.1.791
WS-C3560E-24PD - 1.3.6.1.4.1.9.1.795
WS-C3560E-48PD - 1.3.6.1.4.1.9.1.796
It does not work for other switches.
Even the 3750G switches are not currently supported. The sysObjectID is:
.1.3.6.1.4.1.9.1.516
Thanks--
Afroj

How to make the report shows only top level steps

HI,
I use many subsequences in my tests. I have no interest to see them in the report. How can I force the report to show only top level steps?
Thanks
Rafi

I needed to prevent 'Skipped' steps from appearing in my reports. One way to do this is to override the SequenceFilePostResultListEntry callback in the model. You do this by clicking on Edit and then Sequence File Callbacks and then find SequenceFilePostResultListEntry in the list and click the Add button.
Edit your new callback in your sequence file to check for a pre-condition. In my case I checked for Parameters.Result.Status == "Skipped" since that parameter is set to Skipped, Done, etc. based on the result.
If the condition was true then my only step in the callback was to set Parameters.DiscardResults = True. The TestStand model will then throw that result away when it processes the report. You could add a step for every type of data you wish to discard.
A second method that is easier to implement, but time consuming, is to select each step you DON'T want in your report and bring up the Properties for that step. Under the Run Options tab, deselect the Record Results box. That will keep the results of that step out of the report, but you have to do this for EVERY step you don't want to have reported. The first approach I provided acts to filter the results.
If you aren't sure what the Parameters.Result.Status will be, then set a breakpoint after that step is executed and scan the parameters when the sequence is halted there. You can then detect the actual text used as a result for that step, such as "Done" and can set your pre-condition appropriately.

How to make Liquidity Report

Gurujees,
We are using SAP E6. How to swiftly extract Liquidity Report following the month-end.
Summary of Bank Transactions only gives, a) transfer to corporate HO, b) payments to vendors / customers, and c) revenue / receivable receipts. So how to capture these payments by activities, eg operating expenses in Bank and in Cash Journal.
Thanx in Advance

Hi Ashwin!
the infoobject is 0calday.
Multiprovider contains ¹ of Notification, Functional location,¹ of PM order, Date
So report must show the date of most recent PM order for
Functional location from Notification.

How to make custom Metadata accessible in Text Template Editor ?

Hi all.
I used Lightroom SDK to create a plugin generating custom set of Metadata (for LR5) to manage images as produced items (printed and framed photos).
In order to be able to create usefull lists of items, I would need to be able to print this metadata fields on contact Sheets.
This is the only functionality that prevents me from using Lightroom as a database for produced artworks, beeing able to manage exhibitions, stock locations, sales etc...
Guess this means I have to make those new fields accessible in the Text Template Editor that allows user to compose an aggregated text from various type of metadata for printing or slideshows.
But seems that only the original sets of metadata appears in Text Template Editor, not the one created by my plugin.
Is there a way to add this functionnality to my plugin ?
Thank you very much.

First let me say I have no idea what you mean by Text Template Editor.
mbrch wrote:
Is there a way to add this functionnality to my plugin ?
3 ways:
======
1. If metadata definitions are available in metadata provider module without running plugin initialization function (i.e. as on-the-fly compilable lua), then Jeffrey Friedl's Metadata Viewing Preset Editor will support it. (this is the normal case, the other case would be if plugin init computes a global variable that is returned by metadata provider module instead).
2. You can edit a metadata viewing preset manually, by placing a .lrtemplate file in 'Metadata Field Lists' folder - in with your other presets (is that what you meant by text template editor?). - see example below.
3. Define a tagset factory for your plugin and return the metdata viewing preset options from the tagset factory implementation file - there are instructions in the programmer's guide.
Example below:
return {
   items = {
         formatter = "com.adobe.label",
         label = "File/Folder"
      "com.robcole.photoName",
      "com.robcole.folderPath",
         formatter = "com.adobe.label",
         label = ""
      'com.robcole.developSettings.ProcessVersion', -- individual develop settings can be included like this.
      'com.robcole.developSettings.CameraProfile', -- individual develop settings can be included like this.
         formatter = "com.adobe.label",
         label = ""
         formatter = "com.adobe.label",
         label = "Exif Metadata"
      'com.robcole.exif.AELockButton',
      'com.robcole.exif.ActiveD-Lighting',
      -- add more here...
      'com.robcole.exif.' -- "help" item - remove this item once you've got the hang of this...
   title = "Exif Select",
   id = "Exif_Select_382790710"
Rob

Oracle reports how to make html report

hi,
i m using oracle froms & reports 10g , i want to genrate a html report that wud have hyperlinks ,by cliking on hyperlink another report would be genrated and so on.
how can do this ?
thxs

Please see ...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#sthref1125

How to make SQVI report accessible to others?

Similar Messages

Maybe you are looking for