How to make the background move over when a movie clip hits the edge

ok so the idea here is to make a page with written content on it. the conent will not be able to be seen unless the user hits the arrow keys on there key board. So i need to make a group of objects i can make into a movie clip and than inside that movie clip make an animation that plays the squirrel running. i will pause here to ask two things i dont know how to do i want the squirrel to have an animation when standing still where it flicks its tail (like a real squirrel would). and also how would i flip the squirrel so when the left key is pressed it points left and when the right arrow is pressed it faces left? and my main question when it reaches the edge of the stage the extended background that runs off stage moves over to reavel more content. as well as not have the squirrel run off stage? in short i am using the squirrel to view the full pages content.

You're asking for quite a bit and aren't likely to get anyone to hand you a detailed solution. Here's some things to think about.
As far as flicking the tail goes, that's something you'll have to work out as an animation. You could do it as a timeline animation and/or as a coded animation where you adjust the rotation and other properties of the tail.
Getting the object to face left and right ican be a simple matter of changing its xscale property from 1 to -1 depending on which way it normally faces (1).
If you don't have a problem making the squirrel move to the edge, then you should have no problem making the background move either. You just need to continually check the squirrel x property to know when it hits the edge. Personally, I would only move the background and leave the squirrel in the center.

Similar Messages

I cannot get the toggle link to the business email to stay up long enough to click it. The same thing happens when I try to hit the toggle reply "to sender" or "to all" dropdown on the side of the "reply" button. What can I do to fix this?

Clicking on my e-mail link, [email protected], loads the business side link right underneath. I click on my e-mail address, the business side flashes on the screen, but again when I try to click it, the whole thing disappears.
The same thing is happening with the "reply" button drop down menu for "reply to sender" and "reply to all" menu items.

It seems like you already have an old installation of Story.
You will have to remove it first before installing the latest one.
So the steps would be:
- Open 'Applications' folder in finder and move 'Adobe Story' app to Trash. Remove it from Trash too.
- Search 'Adobe Story' in Spotlight to make sure that this application is not installed on a different drive. If installed then remove that version too.
- Now download the latest version and install it. ( you can download the installer directly from: https://story.adobe.com/AIR/AdobeStory.air )

I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?

I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?
P.S running software version 4.3.3

I have the same problem on an original iPad.

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Hi
Turn off analyze/image stabilization.
Yours Bengt W

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

HT201406 Please help! I can power the device off but when i try to unlock the screen its like it cant feel my finger tracing over my unlock design, thus I cannot sign into itunes to download what i have before I possibly loose everything :(   My warranty

Please help! I can power the device off but when i try to unlock the screen its like it cant feel my finger tracing over my unlock design, thus I cannot sign into itunes to download what i have before I possibly loose everything    My warranty is expired and I dont know if there is any other solution before I dump a bunch of money into this devise. ThaNK YOU!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
Usually, you should do like this:
- while in win, restart
- immediately after chime, press option or alt key
- wait for 2-3 seconds, you should see the boot options
- select Mac OS partition
If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

How to make icons of photos bigger when selecting to attach to email?

how to make icons of photos bigger when selecting to attach to email?

Changing the DPI to 120 won't affect the font size of the menu bar in the Editor. See this FAQ for what happens when you change the DPI:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#The_Organizers_Menu_Bar_ doesnt_show

How to make VPN client auto timeout when it still idle?

How to make VPN client auto disconnect when it still idle?
Hi,I found some user still connected the VPN evenif they dose not use the VPN resouse.
I try to set a "idle timeout" for the VPN configuration.
We use PIX515 8.0.3 and CISCO ACS 4.2 for the VPN's connection and authentication,and the user use cisco vpn client for the connection.
I have tried many methods,but all failured.
First,I configed "vpn-idel-timeout 5" on PIX.It can not worked.
so,I add Radius(CISCO VPN 3000/ASA/PIX 7.0+) attribute "[026/3076/050] Authenticated-User-Idle-Timeout" on CISCO ACS,It still not worked.
And I also add IETF RADIUS Attributes "[028] Idle-Timeout" on group setting on ACS,it always not worked.
i found in vpn client's statistics,it always has some byte sended or received, i thought it maybe IPsec keepalive message or Radius message.
This maybe the reason because the PIX or ACS think the vpn user is keep working.
Can someone tell me how to make a "idle time out"?
best regard.
Roger

here is the configuration on PIX,
group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value mydomain.com
address-pools value vpnpool group-policy DfltGrpPolicy attributes
wins-server value 10.0.0.67 10.0.0.68
dns-server value 10.0.0.67 10.0.0.68
vpn-simultaneous-logins 20
vpn-idle-timeout 5
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-acl
default-domain value want-want.com
address-pools value vpnpool

Does anyone here know how to make a background soundtrack for a Tai Chi Video?

Good morning,
Does anyone here know how to make a background soundtrack for a Tai Chi Video in Garageband. I have been looking around at the different sounds and music in Garageband but I have not been able to find anything that would go with the video.
Here is an example of a Tai chi video if you were wondering
http://youtu.be/a6pJf2otwv8
I want to create something like this for a video I did for a fitness gym for a Yoga instructor and Tai Chi instructor.
Any tips would be appreciated.

Brandon,
you will not have to do any importing in GarageBand. Intalling Mainstage will extent GarageBands Loop Library and Instruments Library.
After you installed MainStage the additional loops and Instruments will show in GarageBand just like all other Loops. you will simply see more loops.
For example:
or:

How to make a rubber effect like when you swipe between apps using 4 fingers on iPad ?

Hey guys,
So how to make a rubber effect like when you swipe between apps (first or last app) using 4 fingers on iPad iOS7 ? Any examples ?
Thanks!
Ivan

Please do not double post the same question.
Just like I said before. Animate X scale and position. Set the anchor point of the left image to the left side. You can then use an expression or just generate keyframes for scale. When you flip to the next screen then animate position. Easy basic animation except for the bounce. Key framing the bounce so that it looks natural takes a lot of experience or an expression.
Google bounce expression after effects and find this. http://www.motion-graphics-exchange.com/after-effects/Wiggle-rubber-bounce-throw-inertia-e xpressions/4ad0f32a944ad
There are a bunch of other solutions.
There is no single click solution to this problem and it is not an effect, it is an animation.

How do you deal with error message when downloading movie on iPad? It was 75% complete.

How do you deal with error message when downloading movie on iPad2. Movie was 75% complete.

I was using wifi. It shows as a purchase on iTunes but it does not show up on iTunes for download. I keep getting the download error with our a number attached on the iPad. Very frustrating. Apple has been of no help at all.

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

I have an original iPad with the latest software. When I send an email, the keyboard opens with halk on the right side and halk of the left across the body of the email. How can I change this?

I have an original iPad with the latest software. When I send an email, the keyboard opens with halk on the right side and halk of the left across the body of the email. How can I change this?

Tap and hold on the Keyboard key at the bottom right side of the right portion of the keyboard. You can use the Dock and Merge option from the menu.
Alternatively you can drag the keyboard down and move slightly left, to get it to merge.

How to make the background move over when a movie clip hits the edge

Similar Messages

Maybe you are looking for