How to make the control file consistent when I re-mulitplexing them

Oracle 10g R2 on the AIX 5.3L
My current control files (three) from the default set-up are all located in the same directory (/dbbaan/oradata/<SID>/). If I want to change some of the multiplexing of the control file to different directory to avoid the media failure,
1. I copy one or two control files to different directory.
2. create a new init_sid.ora from spfile
2. edit the init_sid.ora file and change the locations of the control file
3. shutdown/restart the DB using the init_sid.ora.
4. create the spfile from the pfile
5 shutdown/restart the DB with new spfile ( "SQL> startup")
My question is: since there is always time lag between copying and recreating the new init_sid.ora, while the control file(s) are constantly updating, how can Db guarrente the consistency of the DB when I restart the DB (the control file specified in the init_sid.ora may be some time old) ? or does it matter?
I did above and my DB restart without problem.

Another problem concerns me. What happen if one of
multiplexed control file location, which I use a NFS
of another server, goes down and is not available
during the operation ( After I restart up the DB)? I
am sure I will see the error of that control file in
the alert log.If one of the control files not accessible during operation, Oracle will crash. So you better make sure all of your control file location are reliable and accessible.

Similar Messages

How to make the backlight stay on when charging? N...

Hi
How to make the backlight stay on when charging? or it is not possible?
Thanks

Did you select HIDE under the Options (in the application) ? Its working fine on my Nokia 5800xm
There is one more.. KeepItOn also available at OVI Store..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

How to recreate the control files

Can someone tell me how to recreate the control file?
Thanks in advance
Himanshu

Hi, You can use the following statement.
CREATE CONTROLFILE
SET DATABASE prod
LOGFILE GROUP 1 ('/u01/oracle/prod/redo01_01.log',
'/u01/oracle/prod/redo01_02.log'),
GROUP 2 ('/u01/oracle/prod/redo02_01.log',
'/u01/oracle/prod/redo02_02.log'),
GROUP 3 ('/u01/oracle/prod/redo03_01.log',
'/u01/oracle/prod/redo03_02.log')
NORESETLOGS
DATAFILE '/u01/oracle/prod/system01.dbf' SIZE 3M,
'/u01/oracle/prod/rbs01.dbs' SIZE 5M,
'/u01/oracle/prod/users01.dbs' SIZE 5M,
'/u01/oracle/prod/temp01.dbs' SIZE 5M
MAXLOGFILES 50
MAXLOGMEMBERS 3
MAXLOGHISTORY 400
MAXDATAFILES 200
MAXINSTANCES 6
ARCHIVELOG;
Thanks

How to make the ear file including the 3rd party jar files without menttion in the System Classpath.

Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1)     1) I am using the struts and log4j frameworks and 3rd party jar files with
weblogic8.1.
     2) I make the ejbs,webapplications and 3rdparty jar files, ear file the following
dir structure .And i mentioned the Class-path including all jar files in the MANIFEST
OF EAR FILE.
     While deploying the ear file it is giving following error.If log4j.jar does not
mention in the Weblogic script file
     java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic script
.How to make the EAR file incliding ejbjar,webapplication and 3rd party jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected]

Refer to the section
Handling Utility classes
http://dev2dev.bea.com/products/wlserver/articles/musser.jsp
thanks,
Deepak
"Ashok Samrat" <[email protected]> wrote:
>
Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1)     1) I am using the struts and log4j frameworks and 3rd party jar
files with
weblogic8.1.
     2) I make the ejbs,webapplications and 3rdparty jar files, ear file
the following
dir structure .And i mentioned the Class-path including all jar files
in the MANIFEST
OF EAR FILE.
     While deploying the ear file it is giving following error.If log4j.jar
does not
mention in the Weblogic script file
     java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic
script
How to make the EAR file incliding ejbjar,webapplication and 3rd party
jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected]

How to specify the database file path when create FDM application

Dear All,
How to specify the database file path (MSSQL) when create FDM application?
Right now, all data file are placed in the D:\ . I want to specify the database files (log and mdf file) in other place. How to do it?
Thanks.

Where is the highS2.xml located on the disk? If you add it to your project you should set its Build Action to Content and its Copy To Output Directory to Always in Visual Studio:
Please remember to close your threads by marking helpful posts as answer once your issue has been solved and then start a new thread if you have a new question.

How to get the organized files back when you move to a new computer

How to get your file folder organization back when you move to a new computer?

Your PSE8 is using the default, new empty catalog that's created when PSE is installed.
In Windows, search your entire computer for this file:
catalog.pse8db
The largest one that's found will be your old catalog. If your computer people didn't restore that catalog file (and its entire directory), ask them where the heck it is.
Ken

How to make the java files compile for a project created outside of Eclipse

Hi^^,
I have created a project outside of Eclipse. It has the following folders
1. config
2. source
3. WEB-INF
I want to execute the project on remote server. Will it compile automatically creating a new folder for .class files corresponding to the source folder or do i need to include a build.xml to enable the project to create a new folder for .class files. Also pls tell me how do I write this build.xml
Please advise.

Hi^^,
Actually I have created a project without using eclipse.
My source files are inside WEB-INF/source
Now I want to compile the files using build.xml so that I can create class files. I am using the following build.xml
<project name="jsp" default="all" basedir="./">
<property environment="env"/>
<property file="ArmorJSP.properties"/>

<property name="source" value="."/>
<target name="all" depends="copy, jspc, testservlet"/>

<target name="jspc">
    
    <java classname="weblogic.jspc" fork="yes">
      <arg line="-webapp ${APPLICATION_HOME} -compileAll -d ${APPLICATION_WEB_CLASSES} ${source}/*.jsp"/>
      <classpath>
        <pathelement path="${WL_HOME}/lib/weblogic_sp.jar;${WL_HOME}/lib/weblogic.jar;${ARMOR_HOME}/ARMORSecurity.jar;${ARMOR_HOME}/ARMORUtil.jar"/>
      </classpath>
    </java>
</target>

<target name="testservlet">
    
    <javac destdir="${APPLICATION_WEB_CLASSES}" srcdir="${source}" includes="*.java">
      <classpath>
        <pathelement path="${WL_HOME}/lib/weblogic_sp.jar;${WL_HOME}/lib/weblogic.jar;${ARMOR_HOME}/ARMORSecurity.jar;${ARMOR_HOME}/ARMORUtil.jar"/>
      </classpath>
    </javac>
</target>
<target name="copy">
    <copy todir="${APPLICATION_HOME}">
      <fileset dir="${source}">
        <include name="*.jsp"/>
      </fileset>
    </copy>
</target>
</project>I do not know how to compile the project using this build.xml
The motive of doing all this is to understand how is Eclipse doing the build project step. I simply cannot find any build.xml inside any of my projects created in Eclipse however when right click on the project and choose build project, it compiles excellently. ???
Edited by: pksingh79 on Nov 24, 2008 1:19 PM

How to make the class files to run in a particular platform only

Class files which are created from the java files should only run on a particular platform only..say i'm going to create the class files for windows environment then those class files should only run on that environment only. it should not run on unix environment etc..how to do this..

hi,
i cant think of a reason why you would do something like that.. You cant prevent your class files to be read by the JVM of a different OS, but anyway you could do something to stop your code from running in a different OS, for eg.
Properties prop = System.getProperties();
if (prop.getProperty("os.name").startsWith("Windows")==true)
//code
else
System.out.println("Sorry i will not run in this OS");
}cheerz
ynkrish

How to make the background move over when a movie clip hits the edge

ok so the idea here is to make a page with written content on it. the conent will not be able to be seen unless the user hits the arrow keys on there key board. So i need to make a group of objects i can make into a movie clip and than inside that movie clip make an animation that plays the squirrel running. i will pause here to ask two things i dont know how to do i want the squirrel to have an animation when standing still where it flicks its tail (like a real squirrel would). and also how would i flip the squirrel so when the left key is pressed it points left and when the right arrow is pressed it faces left? and my main question when it reaches the edge of the stage the extended background that runs off stage moves over to reavel more content. as well as not have the squirrel run off stage? in short i am using the squirrel to view the full pages content.

You're asking for quite a bit and aren't likely to get anyone to hand you a detailed solution. Here's some things to think about.
As far as flicking the tail goes, that's something you'll have to work out as an animation. You could do it as a timeline animation and/or as a coded animation where you adjust the rotation and other properties of the tail.
Getting the object to face left and right ican be a simple matter of changing its xscale property from 1 to -1 depending on which way it normally faces (1).
If you don't have a problem making the squirrel move to the edge, then you should have no problem making the background move either. You just need to continually check the squirrel x property to know when it hits the edge. Personally, I would only move the background and leave the squirrel in the center.

How to make the SLA time stop when the status of SR is set to Customer Action?

Dear All,
When a Service Request is created, the agent take over this SR and then set the status to Customer Action. I know the CRM 7.03 has the ability to exclude the Cumtomer Action time out form the Response time of SLA. However, I don`t know how to set it up. Could somebody help to give me some information about this?
I noticed that in SLA, there is a Work duration(SRQ_WORK_DUR) and a Total Duration(SRQ_TOT_DUR), which Duration is used to affect the traffic light of SLA MPT time?
Thank you in advance.
BR,
Elvis

Hi,
in fact you can only trace duration of Customer Action status lifetime - this you can do by
SPRO -> ... -> Define Settings for Durations.
and SPRO -> ... -> Date Management to create this new duration and add to SR dates profile.
So then in Dates tab of Service Request you will have new duration called eg. Customer Action.
If you would like to additionally exclude it from Due Date, so you should then add this status lifetime to Due Date - then Due Date would be pushed to the future (eg. Customer Action status took 3 hours, so after changing status to other one you can write down this time to duration, and then add to Due Date).
For that you need to have a development - eg. using CRM BT Events, or in WebUI layer.
BR
Radek

How to make the parent window inactive when a child window is opened

hi everybody, i am chaitanya. i am working on a window based application. there are some action events in it. when an event occurs then a child frame is opened prompting the user to confirm for yes or no.
the problem i got is, when the child window is opened the parent window is also active. I dont want this to happen. please help me to fix this problem.
thank you all in advance, have a nice day.

Use a modal JDialog, or better still given the apps. requirement for input, a JOptionPane. The JOptionPane.showInputDialog() or JOptionPane.showConfirmDialog() methods seem well suited to the task.

How to make the page expired when user click back

how to make the page as expired when i click back button on the browser.
i want a better way.
actually i have a timer.when it reaches 00.00 then the expired page will be called automaticlly using location.href="expired.jsp" then if the user clicks back it should not show the previous page.this concept is applied with paging concept
response.setheader is not working ...
i have redirect when click back using
<body onunload>....i call another page here.
but it is not a good way.
so pls help me to solve this problem
using session or another good way

Use this instead.
Frame.setDefaultCloseOperation(javax.swing.WindowConstants.DO_NOTHING_ON_CLOSE);

In case of a DB crash what happens to the status of the Control File

When a DB is crashed will the Control file that exists in the OS also get corrupted, What happens to the Data Files , how to recover the Control files and Data Files , the DB in case there isn't any Backup media or any Dump available on the DB.

The only one way to recover a database is to be in archivelog mode.
And if I said about recover stricto sensu, that's because even in noarchivelog mode we need to use the command recover until cancel before an open with resetlogs option, even if we haven't any redo/archive logs. That fake a recover, this is what we say a mimic recover. Which is not a recover stricto sensu like it can be the case with archivelog mode.
Nicolas.

How to make the condition type active

hi,
how to make the condition type active when its in inactive stage and its showing yellow triangle and y in the control features of it.
and
how to solve if is showing a statement as "INITAILISED".
regards,
balajit

Dear Balaji,
Yes it will come as Inactive mode.....If you make the 2 condition Class is same in single Pricing procedure ,In Standard system will display like this only..
For Example:PR00-Condition class is Price
EX00-Condition class is Price
Then first Condition type will become Inactive.. change the Class of the Second Condition Type.
Best Regards
raj.

How to make a button stay down when I click on it in CSS nav bar.

So I have created a horizontal navigation bar, I use the CSS
Sprites/Pixy method to get the hover working with the same image as
the link/in active stage of the buttons.
Now how do I make the button stay down when someone click on
them?
These are the codes for the nav bar.
#nav{
width: 780px;
list-style: none;
margin-top: 0;
margin-right: auto;
margin-bottom: 0;
margin-left: auto;
padding: 0;
height: 40px;
#nav li{
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
font-weight: bold;
float: left;
padding: 0;
#nav a{
width: 125px;
display: block;
color: #000000;
text-decoration: none;
text-align: center;
background-image: url(ZITTO_IMAGES/button_set1a.jpg);
background-repeat: no-repeat;
background-position: center 2px;
padding-top: 14px;
padding-bottom: 10px;
background-color: #000000;
#link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
#nav a:hover{
background-image: url(ZITTO_IMAGES/button_set1a.jpg);
background-repeat: no-repeat;
background-position: center -36px;
color: #FFFFFF;
width: 125px;
padding-top: 14px;
padding-bottom: 10px;
background-color: #000000;
Everything works so far, the hover works when you roll the
mouse but when you click the button goes right back.
How can I make it stay down and then go back to normal when
you click on another link/button?
Thanks very much.
Patrick

Read my suggestion again. You are missing a critical point. I
show you
exactly where to put the stylesheet. And it doesn't matter
how many
stylesheets you have on a page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Webethics" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> Change this -
>
> #nav a{
> width: 125px;
> display: block;
> color: #000000;
> text-decoration: none;
> text-align: center;
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center 2px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
>
>
> #nav a:hover{
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center -36px;
> color: #FFFFFF;
> width: 125px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> to this -
>
> #nav a{
> width: 125px;
> display: block;
> color: #000000;
> text-decoration: none;
> text-align: center;
> background-image: url(ZITTO_IMAGES/button_set1a.jpg);
> background-repeat: no-repeat;
> background-position: center 2px;
> padding-top: 14px;
> padding-bottom: 10px;
> background-color: #000000;
> }
>
> #link2,#link3,#link4,#link5,#link5,#link6 { margin-left:
6px;}
>
>
> #nav a:hover{
> background-position: center -36px;
> color: #FFFFFF;
> }
>
> Then on each individual page, change this -
>
> </head>
>
> to this -
>
> <style type="text/css">
> #nav a#link4 {
> background-position:center - 36px;
> }
> </style>
> </head>
>
> (for link4, for example)
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Webethics" <[email protected]> wrote
in message
> news:[email protected]...
> >
quote:
Originally posted by:
Newsgroup User
> > When they click on a button, do they go to another
page? And is each
> > button
> > uniquely identified?
> >
> > If so, then put a little stylesheet on each such
page that sets the
> > particular button to the down sprite settings,
e.g.,
> >
> > a#link6 { downspritevalues }
> >
> > --
> > Murray --- ICQ 71997575
> > Adobe Community Expert
> >
> >
> > This is the link to the page.
> >
http://www.patrickjudson.com/zitto_web1d.html
> > What state do I use to get this effect? The active
or the visited?
> >
> > I want the buttons to remain down when click or
even better, how do I
> > get
> > the
> > welcome button to appear down when a person visits
the page to show them
> > they
> > are at the home page.
> >
> > Thanks so much. Patrick
> >
> >
> >
>
>
>
> Hey! Murray, thanks very much for the efforts. However
I'm still confused
> as
> to where to insert the individual styles on each page.
>
> The pages already have a style sheet, in fact they all
share the same
> style
> sheet. The following codes below is what you instructed
but I'm confused
> as to
> where to insert them since the page already has a head
opening and closing
> as
> well as a style opening and closing tags. Can you please
add the codes you
> instructed so I can see where they go and how to
implement them?
>
> Thanks - Patrick
>
>
> Then on each individual page, change this -
>
> </head>
>
> to this -
>
> <style type="text/css">
> #nav a#link4 {
> background-position:center - 36px;
> }
> </style>
> </head>
>
> (for link4, for example)
>
>
>
>

How to make the control file consistent when I re-mulitplexing them

Similar Messages

Maybe you are looking for