How  to make the Fix Date & Qty automatic

Dear Friends,
In the Sales order schedule line there is an indicator  Fixed Date & Qty.
How can I make this indicator to be automatic  when I create the Sales Order.
Please help
Ravi

Hi Ravi,
Goto SHD0 T.Code and create a transaction variant.
Assign the same to your sales order type.
When you try to create a sales order then this will be ticked by default.
The same you can do in OVZJ T.Code also.Here against your sales area,you have to tick it.
Regards,
Krishna.

Similar Messages

  • Crystal Report: How to make the fixed height box in all pages.

    Post Author: WTech
    CA Forum: Crystal Reports
    I want to make the height of box fixed size in all pages. The box in outside the detail section. Currently the size of the box changes according to the content of the detail section. Could anyone suggest me how should i achieve it ?  

    Hi srinivasan,
    If you want to keep "Save" and "Stop" common, Why do you want to keep them on Tab control? Is your tab control taking entire space on Front panel? If so, you can have SAVE and STOP on other vi, and you can call this vi (MODAL).
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.

  • How to make the 'Finish Date' field Editable in Project server 2013

    Hi All,
    In Project server 2013 on premises deployment, When I try to create a new enterprise project [Also in case of new custom project type], Only the 'Start Date' field is available. The 'Finish Date' field is by default taking the value of the 'start Date' itself.
    I am unable to make this 'Finish Date' field editable.
    Any pointers on this would be very helpful,
    Thanks
    Shanky

    Shanky --
    When you create a new project in either Microsoft Project Professional or Project Online, the system does not allow you to enter both a Start date and a Finish date for the project.  Here is how the software works:
    You enter the Start date of the project.
    You completely plan the project with tasks, task dependencies, task Durations, and assigning resources to tasks.
    Based on the Start date you provide, plus all of the task information, the software calculates the Finish date of the project for you.  So, you cannot provide both the Start date and the Finish date, nor is they any way to force the system to allow
    you to do this.  Hope this helps.
    Dale A. Howard [MVP]

  • How to make the datagrid data organised

    I am not sure what code that can make the data in datagrid in position like regid,regname,,address,email,phone,company rather than every time I go in,it will refresh and be in random position and it is not organised.
    Please help and please tell me where to put the code.
    package {
      import flash.display.MovieClip;
      import fl.events.*;
      import flash.events.*;
      import flash.net.NetConnection;
      import flash.net.Responder;
      import RecordSetDP;
      public class RegistrationAdmin extends MovieClip {
      private var gateway: String = "http://localhost:8088/amfphp/gateway.php";
      private var connection: NetConnection;
      private var refreshResponder: Responder;
      private var updateResponder: Responder;
      private var regid: int;
      public function RegistrationAdmin () {
      viewBtn.addEventListener (MouseEvent.CLICK, viewRegistrants);
      updateBtn.addEventListener (MouseEvent.CLICK, updateRegistrant);
      deleteBtn.addEventListener (MouseEvent.CLICK, deleteRegistrant);
      addBtn.addEventListener (MouseEvent.CLICK, addRegistrant);
      updateResponder = new Responder (refreshData, onFault);
      refreshResponder = new Responder (refreshSuccess, onFault);
      connection = new NetConnection ();
      connection.connect (gateway);
      registrantsDG.addEventListener (Event.CHANGE, gridItemSelected);
      refreshData (true);
      public function viewRegistrants (e: MouseEvent): void {
      refreshData (true);
      private function refreshData (refresh: Boolean): void {
      if (refresh)
      connection.call ("RegistrantService.viewRegistrants", refreshResponder);
      private function refreshSuccess (result: Object): void {
      registrantsDG.dataProvider = RecordSetDP.toDataProvider (result);
      private function onFault (fault: Object): void {
      trace (String (fault.description));
      private function gridItemSelected (e: Event): void {
      regid = e.target.selectedItem.regid;
      regnameTxt.text = e.target.selectedItem.regname;
      addressTxt.text = e.target.selectedItem.address;
      phoneTxt.text = e.target.selectedItem.phone;
      emailTxt.text = e.target.selectedItem.email;
      companyTxt.text = e.target.selectedItem.company;
      private function getParams () {
      var param: Object = new Object ();
      param.regid = regid;
      param.regname = regnameTxt.text;
      param.address = addressTxt.text;
      param.phone = phoneTxt.text;
      param.email = emailTxt.text;
      param.company = companyTxt.text;
      return param;
      private function updateRegistrant (e: MouseEvent): void {
      var param: Object = getParams ();
      connection.call ("RegistrantService.updateRegistrant", updateResponder, param.regid, param.regname, param.address, param.phone, param.email, param.company);
      private function deleteRegistrant (e: MouseEvent): void {
      var param: Object = getParams ();
      connection.call ("RegistrantService.deleteRegistrant", updateResponder, param.regid);
      private function addRegistrant (e: MouseEvent): void {
      var param: Object = getParams ();
      connection.call ("RegistrantService.addRegistrant", updateResponder, param.regname, param.address, param.phone, param.email, param.company);

    the datagrid has sortItems and sortItemsOn methods you can use.

  • How to make the manufacture date as  not required field

    When upload initial stock, the manufacture date is made as a required field to enter but actually there are no related information for some materials.  Is there any configuration to disable this function and make manufacture date field as an optional field?
         Thanks a lot!

    Hi,
    Use t.code: OMJX and make  date of manufacture {field nameGOITEM-HSDAT} field as hide or display as you required and save.
    Now try ur trasnaction.
    Regards,
    Biju K

  • During synchronization, how to make the iPhone data will not be replaced by data from iTunes, but otherwise?

    Well, I recently iTunes has Buge and when I reopened everything was gone. I did not backup later, so my library is composed only of my purchases on the iTunes Store. I want to sync my iPhone with iTunes, but if I make this sync, iTunes will erase all data on the iPhone and replace with data from the iTunes library. But I want the opposite, that is to say replace iTunes data with data from the iPhone. How do I do this?
    Thank you in advance!
    PS: I know that many will tell me that iTunes syncing only occurs from iTunes to iPhone, not vice versa, or need to use an extraction program .. But is it any other solution?

    Dudley,
    Try this Knowledge Base Article:
    iCal, Mac OS X 10.5: Empty "Home" and "Work" calendars may appear after installing Leopard
    Since you have a .Mac account, have you been using .Mac Backup?
    ;~)

  • How to make the batch determination process automatic

    hi
    ive maintainde my raw material for batch determination. but the thing is. when i create a production order.
    the material with batch is not pulling out batch automatically.i ahve to select the material and go to the bottom if the screena and select the batch determination. then its working.
    can i automate this.
    i mean when i create a production order.it automatically pulls out a batch. with out me doing the batch determination.

    Dear deepu,
    to do automatic batch determination set the Batch Entry field in material master to 3 for all batch manged materials. After this create and release the order, system will determine the batches automaticaly. Since u r alreeady using manual determination all other settings remain same. Just u need to change in material master
    sree

  • Fix Date & Qty Field in Schedule Lines Sales Order

    Dear Friends,
    I want to understand the need and use of the Fix Date & Qty field check in the sales order -> Item -> Schedule Lines.
    Can anybody explain me the need of the same.
    Regards,
    Harsh

    If the availability check for an item determines that the item cannot be delivered fully on the requested delivery date, and, as a result one or more schedule lines have to be created for later delivery dates, the customer can decide whether to accept these delivery dates and quantities.
    You can record the customer's decision either by setting an indicator in the Fixed date and qty field or by leaving this field blank. The field is displayed both on the schedule line overview screen and on the availability screen.
    <b>Customer Accepts the Schedule Line Proposal</b>
    If the customer accepts the schedule lines which are proposed by the system, mark the Fixed date and qty field. The system then transfers the requirements for the schedule lines to material requirements planning.
    <b>Customer Requires Goods Earlier</b>
    If the customer requires the goods earlier than the date that the system can confirm after the availability check, leave the Fixed date and qty field blank. The system then only passes on the requirements for the requested delivery date and does not take the quantities and dates confirmed by the system after the availability check into account. In this case, it is assumed that the requested delivery date can be kept to because, for example, additional production capacity may become free. The system only confirms the sales order once the entire order quantity can be delivered on the requested delivery date. In the subsequent delivery processing, the sales order is only considered to be completed when the entire order quantity has been delivered or when all partial delivery agreements have been fulfilled.
    A fixed item is considered to be completed once the entire confirmed quantity (which can be smaller than the originally requested order quantity)has been delivered. Therefore, it does not make sense to fix the confirmed quantity to 0 as the item is considered to be completed from the start.
    During rescheduling, the fixed quantities and dates are no longer taken into account.
    The same info u can get easily from help.sap.com
    Message was edited by:
            sam masker

  • How to get the fixed result in a DES/CBC mode with fixed input data and fix

    How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
    below is my code:
    byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
    byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
    SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
    Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
    cipher.init( Cipher.ENCRYPT_MODE, skey );
    byte[] result = cipher.doFinal( DESInputData );

    Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
    // Create CBC-mode triple-DES cipher.
    Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
    // Specify IV.
    IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
    // Initialize cipher with proper IV.
    c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
    // Encrypt and decrypt should work ok now.
    For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
    An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
    Regards,
    Ronald Maas

  • After clicking on an open tab, how to make the focus automatically go to the body of page?

    After clicking on an open tab, how to make the focus automatically go to the body of page?
    Right now, clicking in an open tab and using arrow keys now moves through the open tabs. I liked the old versions where right after clicking in a tab you could directly go to navigate the page with the arrow keys.
    Is there a something I can change in about:config to change this behavior?
    Thanks in advanced.

    Firefox should still set the focus the the browser area if you click a tab.<br />
    Only with very old browser versions you could set the focus to a tab by clicking a tab.
    This behavior is likely caused by an extension.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How to make the exchange of data between 2 while loop in real time

    hello
    I have 2 while loop
    the 1st while loop includes the data acquisition program
    the 2nd while loop includes the control program
    my question is how to make the exchange of data between 2 while loop in real time
    I tried with the local variable and direct wiring between the 2 while loop
    it does not work (there is a delay)
    Solved!
    Go to Solution.

    Bilalus,
    Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions. 
    Warm Regards,
    William Fernandez
    Applications Engineering
    National Instruments

  • How can I make the status bar hide automatically when using safari?

    How can I make the status bar hide automatically when using safari?

    When Safari is in FullScreen mode, menu bar will be hidden.
    Safari window to fit the screen?
    Move the mouse pointer to the bottom right corner of the Safari window.
    Double arrows will appear. Drag it to resize the window to fit the screen.

  • How can I make the iPhone podcast app automatically stop playing after one episode?

    How can I make the iPhone podcast app automatically stop playing after one episode?

    When playing a song, are the controls at the top of the screen there? (Genius, Shuffle, Loop?)
    If not, tap the center of the page once to expose them
    now keep tapping the circle on the left part of the exposed controls untill a one (1) appears...

  • HOW TO MAKE THE FIELDS ON TABLE CONTROL SCREEN FIXED!!

    Dear all,
    Can you please tell me as to how to make the fields on the table control screen fixed (not respond to the scroll bar) i.e. simillar to MC88 screen , the first two fields are fixed and don't respond to the scroll.
    Please Help!!!!
    Vj

    Hi
    In TC, goto attributes and set 'Fixed columns' as 2. This will fix the first 2 columns.
    Regards
    Navneet

  • HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    Welcome to the Apple community.
    Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

Maybe you are looking for