How to make the batch determination process automatic

hi
ive maintainde my raw material for batch determination. but the thing is. when i create a production order.
the material with batch is not pulling out batch automatically.i ahve to select the material and go to the bottom if the screena and select the batch determination. then its working.
can i automate this.
i mean when i create a production order.it automatically pulls out a batch. with out me doing the batch determination.

Dear deepu,
to do automatic batch determination set the Batch Entry field in material master to 3 for all batch manged materials. After this create and release the order, system will determine the batches automaticaly. Since u r alreeady using manual determination all other settings remain same. Just u need to change in material master
sree

Similar Messages

How to make the Fix Date & Qty automatic

Dear Friends,
In the Sales order schedule line there is an indicator Fixed Date & Qty.
How can I make this indicator to be automatic when I create the Sales Order.
Please help
Ravi

Hi Ravi,
Goto SHD0 T.Code and create a transaction variant.
Assign the same to your sales order type.
When you try to create a sales order then this will be ticked by default.
The same you can do in OVZJ T.Code also.Here against your sales area,you have to tick it.
Regards,
Krishna.

After clicking on an open tab, how to make the focus automatically go to the body of page?

After clicking on an open tab, how to make the focus automatically go to the body of page?
Right now, clicking in an open tab and using arrow keys now moves through the open tabs. I liked the old versions where right after clicking in a tab you could directly go to navigate the page with the arrow keys.
Is there a something I can change in about:config to change this behavior?
Thanks in advanced.

Firefox should still set the focus the the browser area if you click a tab.<br />
Only with very old browser versions you could set the focus to a tab by clicking a tab.
This behavior is likely caused by an extension.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can I make the status bar hide automatically when using safari?

How can I make the status bar hide automatically when using safari?

When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen.

How can I make the iPhone podcast app automatically stop playing after one episode?

How can I make the iPhone podcast app automatically stop playing after one episode?

When playing a song, are the controls at the top of the screen there? (Genius, Shuffle, Loop?)
If not, tap the center of the page once to expose them
now keep tapping the circle on the left part of the exposed controls untill a one (1) appears...

HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

How can make the events listed in my chalenda become automatically a reminder in the reminder?:

Welcome to the Apple community.
Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

How the stock determination process works

Hi All
Can any one tell me how the stock determination process works in inventory management?
if possible give me the steps involved in stock determination process .
Regards
M S K

Hi
i hope this helps
http://help.sap.com/saphelp_47x200/helpdata/en/d8/2f3746996611d1b5480000e82de955/frameset.htm
regards
maniraj

Customization steps of the text determination processes

Can anybody anybody tell the customization steps of the text determination processes (transaction codes: VOTXN and SO10) of the header of the sales documents step by step in a detailed manner?
Thanks in advance.

Hi Hikmet,
In a business relationship, it is essential that business partners exchange information throughout the logistics chain. In sales and distribution, this exchange of information is supported by texts in master records and documents. You can maintain these texts for one particular customer or define them so that they can be used more flexibly.
Texts can be used in many areas of sales and distribution:
Sales notes for customers
Sales texts for materials
Explanations in order confirmations
Shipping instructions in deliveries
http://help.sap.com/saphelp_erp2005vp/helpdata/en/38/9e9263a1f611d199ad0000e8a5bd28/frameset.htm
reward points if it helps u
with regards
Rajesh
RMD
Posts: 381
Questions: 24
Registered: 1/10/07
Forum points: 690
   Re: Text determination
Posted: Apr 5, 2007 12:42 PM    in response to: raju pusapati       Reply      E-mail this post
Hi,
In a business relationship, it is essential that business partners exchange information throughout the logistics chain. In sales and distribution, this exchange of information is supported by texts in master records and documents. You can maintain these texts for one particular customer or define them so that they can be used more flexibly.
Texts can be used in many areas of sales and distribution:
Sales notes for customers
Sales texts for materials
Explanations in order confirmations
Shipping instructions in deliveries
You can define as many text types as you require (sales texts, shipping texts, internal notes, supplement texts etc.) for master records and documents.
You can take the settings for the texts from Sales and Distribution Customizing under Text control.
Features
You store the texts that are to serve as information carriers in the system and in the output in the customer master record, the material master record, and in the sales and distribution documents. In addition the following processing and control functions are supported:
Texts are proposed from the master records in the sales and distribution documents, if you have made the appropriate setting.
Texts can be copied from a reference sales and distribution document into another sales and distribution document (e.g. from an inquiry into a sales order or from an order into a delivery).
The copying of texts can be made language dependent, if required.
You can change copied texts.
You can integrate standard texts into the sales and distribution documents.
If you want to use texts more than once, you can enter these texts as standard texts and include them in the master record or document texts. If you define standard texts, they are included in the sales and distribution forms when they are issued.
Some standard texts to which you can refer in the sales and distribution documents have been defined in the standard version of the SAP R/3 System.
Notes on Entering Text
You can use standard texts to give notes to the employee entering an sales and distribution document regarding the information he should include in specific header or item texts and the sequence in which he should do it. For example, by including a standard text such as a header note in the sales document, you can make sure that the employee specifies in the first line whether the customer has taken advantage of a sales promotion in his purchase order and in the second line, how (newspaper, radio etc.) he found out about the promotion.
Proposals from the Master Records
The standard text above must first of all be created and then included in a text in the customer master. You can define in Customizing whether this text is automatically proposed from the customer master record in the header note of the document header when you create a sales document.
Standard texts can be proposed in the documents at header and item level in the same way from the material master record.
Create
To create a standard text, proceed as follows:
Select Tools ® SAPscript ® Standard text on the main menu screen.
Enter a name for the text to be created in the field Text name, the indicator ST in the field Text-ID, and the abbreviation for the language in which you want to create the text in the field Language.
Select Create/Change.
You switch to the SAPscript editor. If no standard text has been created with this name, the following message is displayed: Text stands for the language indicator with which you control the language of the standard text. The line in which you make these entries must have the formatting key /: (paragraph format for a command line) in the format column.
Calling Up At the Time of Issue
In Customizing any number of standard texts can be included in the definition of a sales and distribution forms. The texts then appear in the appropriate place in the form when each output is issued.
Further Information
You will find additional information on the SAPscript editor and on INCLUDEs as well as examples online in the hypertext system under the text module name STXD_ED. Proceed as follows:
Select Tools ® Hypertext ® Structures on the main menu screen.
Enter the text module name in the Structure field and in the Language field the abbreviation for the required language.
Select Structure ® Display.
You reach the Display Structure screen.
Place the cursor on the entry that you want to read and select Goto ® Document ® Read.
The content of the text module is displayed on the screen.
Select Back to return to the initial screen.
Also Visit-
http://help.sap.com/saphelp_47x200/helpdata/en/90/758534c960a134e10000009b38f83b/frameset.htm
REWARD IF U FINDS THIS AS USEFUL....
Regds
MM

HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable? The article referenced is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable? The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
You have two or three options (depending on your Mac Model).
1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
2. Download Software from Apple servers...
3. Install Windows...
Are any additional instructions really necessary?

Batch determination process in SD- Delivery: any Function module?

Hi All,
I want to use the logic used in SD-Delivery for batch determination in Batch Search Strategy report.
Is there any function module avaialable for batch determination process done in SD so that I can make use of it?
Thanks in advance,
Rgds,
MAdhuri

Hi Madhuri,
My requirement is to select that batches that were picked up by the delivery (i.e. those that passed the search strategy) using the Material and Plant combination, Customer as an optional parameter.
Could you please provide the function modules that are required to make use of the function module "VB_BATCH_DETERMINATION"? Also, could you please let me know if we need to take into consideration any other factors when using the function module VB_BATCH_DETERMINATION
Thanks in advance!
Thanks,
Manohar. Dubbaka.

How to make the calculation or formula in bottom of the coloum

How to make the calculation or formula in bottom of the coloum in Discoverer report.
Regadrs
Manikandan

Hi Ros
You have a couple of issues, one that is simple to resolve and one that is not so simple.
First, the simple one - the word TOTAL. To alter the word that Discoverer inserts next to a total, or to even remove the word altogether, use this workflow:
1. Right-click on the total and from the pop-up menu select Edit Total
2. At the bottom right-hand corner of the Edit Total dialog box is the area where the label is maintained. You will see a checkbox for the label
3. If you uncheck the label you can change the label to anything you like, including nothing
4. After you have set the label, click OK and close the Edit Total dialog box
Note: In Desktop, this is done via a drop-down from the Total dialog box. If you click the drop-down, the last item in the list is called Generate Label Automatically. If you uncheck this you can create your own label.
Your second issue concerning the non-totaling of the grand total on some items means that there is something preventing one or more of the totals from calculating. First of all, try to determine which item or items is causing the problem by adding individual totals to each of the desired columns. You will eventually find the column which has the culprit. If you use the above workflow to suppress the display of any labels your total line will look as though you have totaled all items.
Next, having found the column that will not total, try to figure out why the values will not add up. Could the column be a calculated item? If so, it is possible that you have used SUM on the outside of the calculation, like this:
SUM(some item - some other item) - this will not total if the original items themselves are in the query and are also being summed. This is because you are mixing aggregate and detail items within the total.
Try changing the formula like this:
SUM(some item) - SUM(some other item) and see if this helps.
If this is not the cause then try changing the formula for that column's total to CELL SUM instead of SUM. This causes Discoverer to literally add the values in the column.
If this is not the cause, could you possibly be trying to total repeated values? By default, this is disabled in the later versions of Discoverer. The repeated values will be caused if you have multiple joins in your query and the item that you are totaling is from the many end of a one to many relationship. Suppose you had items from a header table and line table in the same worksheet with there being multiple lines for the same header, and now let's say you have a column which is returning something from the header. That value will get repeated and if you try to total it would generate the wrong answer, hence out of the box Discoverer is trying to protect you from yourself.
However, it could be that the column really should be totaled but because Discoverer has detected a one to many join it will not total that column. To prove that this is the reason, change the join from a one to many to a one to one. Don't worry, this won't stop the query from working. If this allows the total to work then you can either leave the join as it is with a one to one, which won't harm Discoverer or you can edit the pref.txt on the server and change one of the preferences.
The preference I would change is called AllowAggregationOverRepeatedValues. By default this is disabled and will be set to 0. Changing this to a 1 will now tell Discoverer that repeated values can now be totaled. Don't forget to apply the preferences correctly by execiting applypreferences.bat, on Windows or applypreferences.sh, in Linux or Unix, and then stopping and restarting the Discoverer server.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

How to trun off batch determination for certain shipping points ?

During Delivery Notes creation we would like to turn off the batch determination on basis of certail shipping points. can some please guide what is the best way to do it. We do not want it turned off for all the shipping points but for a special ones.
The idea is when we create Delivey for certain shipping point we do not need to fill in the batch code and yets save, pick confim, goods issue during delivery creation process....
we have sepcial shipping points for consignment process and for them we need to skip the batch determination......
Thanks in advance
Rajey

I don;t think you can control based on shipping point because batch creation is controlled at movement type level

How to make the Page UP and down work on a table control screen?

Dear all,
Can some one suggest how to make the table control screen work with Page Up and Page down controls.
when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
Regard,
Vj

Take this code as a referance:
Sample code for vertical scrolling in PAI processing will look like this:
MODULE user_command_XXXX INPUT. (XXXX is screen no.)
CASE ok_code.
    WHEN 'P--'.
      CLEAR ok_code.
      PERFORM paging USING 'P--'.
    WHEN 'P-'.
      CLEAR ok_code.
      PERFORM paging USING 'P-'.
    WHEN 'P+'.
      CLEAR ok_code.
      PERFORM paging USING 'P+'.
    WHEN 'P++'.
      CLEAR ok_code.
      PERFORM paging USING 'P++'.
*&      Form PAGING
*       Form to do scrolling for screen XXXX
*      -->CODE   OKCODE value (P--, P-, P+, P++ )
FORM paging USING code.
DATA: i TYPE i,
        j TYPE i.
CASE code.
    WHEN 'P--'. <table control name>-top_line = 1.
    WHEN 'P-'.
      <table control name>-top_line =
              <table control name>-top_line - line_count.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
    WHEN 'P+'.
      i = <table control name>-top_line + line_count.
      j = <table control name>-lines - line_count + 1.
      IF j LE 0. j = 1. ENDIF.
      IF i LE j.
        <table control name>-top_line = i.
      ELSE.
        <table control name>-top_line = j.
      ENDIF.
    WHEN 'P++'.
      <table control name>-top_line =
             <table control name>-lines - line_count + 1.
      IF <table control name>-top_line LE 0.
        <table control name>-top_line = 1.
      ENDIF.
ENDCASE.
ENDFORM.                               " PAGING
Regards,
Ravi

How to make the status of a sales order complete of which PART DELIVERY

How to make the status of a sales order complete of which PARTIAL DELIVERY has already done. <b>(Assigning rejection status not accepted)</b>

Hi Gyana
There is no document with me. But I can confidently say that because I am using this functionality.
In my case I have created a Order Reason as "Short Closed". once you short close this order only the balance quantity gets rejected (provided you have already made previous delivery and PGI).
Try it in one of your test clients if you have. Once it is short Closed it wont also show in the orders due for processing in Production.
Also you can generate reports based on this if your customer wants to know how many order he has short closed, qty of item short closed etc.
Try it.
Rgds
Sunil

How to make the exchange of data between 2 while loop in real time

hello
I have 2 while loop
the 1st while loop includes the data acquisition program
the 2nd while loop includes the control program
my question is how to make the exchange of data between 2 while loop in real time
I tried with the local variable and direct wiring between the 2 while loop
it does not work (there is a delay)
Solved!
Go to Solution.

Bilalus,
Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions.
Warm Regards,
William Fernandez
Applications Engineering
National Instruments

How to make the batch determination process automatic

Similar Messages

Maybe you are looking for