How to make update method permanent once and forever?

Hi,
Every time I get an update to Flash and install it, at the end of the install I get the three update choices of ‘Allow Adobe to install updates (recommended)’, ‘Notify me to install updates’ and ‘Never check for updates (not recommended)’. Every time I choose the second option and every single subsequent time there is an update I have to go through the same procedure again because the first option becomes selected. I do NOT want Adobe to perform automatic updates. Is there a way to set it to notify me of updates but never bug me to change my update method? I have tried changing the setting through the Control Panel but this doesn’t make any difference either. I just want to be notified of updates but not be pestered with those same three options EVERY time.

This answer is NOT working. The line "SilentAutoUpdateEnable=0" is already present. And it still queries for the annoying question, even when asked and answered ad nauseum.
Adobe should in the very next update, as a minimum, make it such, that the chosen value in "Choose your update method:" remains PERMANENT and FOR EVER until the user changes it. It is WILDLY annoying to have to answer this question over and over and over and over and over and over again. Make a new value or something that will be written to the mms.cfg file, that will permanently understand this setting, I Want to update, but I want to know when and how and why, and I especially want to do it myself - Automatic updates can for novice users be nice, until it screws up the entire system - but for super user level or above it is an annoyance, that programs do not respect the answers of the user. It SHOULD ask this question ONCE, and never ever there after - unless the user changes the behaviour, in e.g. the mms.cfg file.
I hope this is crystal clear --- it should be, and I cannot fathom that millions of other users are not annoyed by this popup box ... When i press "DONE" ... it should be EXACTLY THAT - notify me to install updates, BUT NOT to ask it every time what "update method" i want to use -- i've only told you a million times before --- just freaking get the answer and understand it.
Annoyed regards : CyberstormXIII

Similar Messages

  • I merge projects in aperture, it works fine until aperture restarts.  After aperture restarts, the projects are no longer merged, and are back the way they were.  Can anyone suugest how to make the merge permanent?

    I merge projects in aperture, it works fine until aperture restarts.  After aperture restarts, the projects are no longer merged, and are back the way they were.  Can anyone suugest how to make the merge permanent?

    I tried the first aid tasks but the issue is still there.  I have more info now though.  It's not a problem with merging.
    The problem is that new projects are being generated everytime aperture starts (with the same name, ie 01, 02.... and 01 (1), 02 (1) .....)
    When aperture start, it shows "importing".  When I click on importing, it goes into the activity box.  In the activity box, has many lines as below.  The added projcts are all empty.  It's annoying because i have many useless projects being generated.

  • How to you update the html once a Mail app is published?

    I have a sample Office 365 Mail app
    https://code.msdn.microsoft.com/vstudio/Outlook-Email-Forwarder-App-650a5b41/view/Discussions/0?showDiscussionForm=True
    The app loads great and I can see run it ok. But if I update the HTML page it never gets updated. How do I update the code for the mail app once it is up and running? I was able to update it once but  am not sure what I did.
    Any suggestions?

    Hi,
    >> But if I update the HTML page it never gets updated. How do I update the code for the mail app once it is up and running?
    In debug mode, you need to reload the app by click the mail app to reflect the changes.
    >> How to you update the html once a Mail app is published?
    If you have already published the web application (for example, on Azure), you need to re-publish the web application to reflect the page changes.
    Please let me know whether it works for you.
    Regards,
    Jeffrey
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to make a button to stop and run a for loop?

    How to make a button to stop and run a for loop?  and if it is stopped it shall start from where i t stopped.

    Your VI has some very fundamental flaws.
    The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
    Thus the terminal of the start/stop button belongs inside the FOR loop.
    Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
    Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
    Once you solve (2), the x indicator will contain a random value whenever you "stop".
    As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
    Place e.g. a 500ms wait inside the FOR loop to solve this.
    Don't place terminals of indicators on top of formula nodes.
    Your formula does not produce any output, so really has no purpose.
    Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
    It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
    LabVIEW Champion . Do more with less code and in less time .

  • Hi to all,how to make back up if i want update my ipad ti ios5,then how to make update to ios5?

    Hi to all,how to make back up if i want update my ipad ti ios5,then how to make update to ios5?

    Update your iTunes to the most recent version.
    Using the cable, connect the iPad to the computer and iTunes. It should tell you that there is an update to the iOS available and ask you if you want to download it.
    iTunes will back up your iPad as part of this - make sure to let iTunes do it.
    After iTunes installs the new OS, it will restore the backed-up data and media. Make sure to let your iPad do this before unplugging it - it's not clear that the iPad is being restored, but if all goes well it will be.

  • I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

    I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

    Hello Huss87bash,
    This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • How can i update data in okc_k_items and csi_item_instances tables?

    How can i update data in okc_k_items and csi_item_instances tables?
    by EBS .
    Thanks.

    For csi_item_instances table, you can use the following API:
    CSI_ITEM_INSTANCE_PUB.UPDATE_ITEM_INSTANCE
    For okc_k_items, try using the following API:
    OKC_CONTRACT_ITEM_PUB.UPDATE_CONTRACT_ITEM
    Hope this helps!

  • How to make it selected when clicked and open popup

    Hi,
    I 've a form in the parent page with many form elements.
    I've 2 radio buttons with values "Yes" and "No". I am opening a modal popup when clicked on "Yes" radio button. The modal popup is opening fine.
    But when I click "Yes", it' s not selected. After modal popup is closed, when I return to parent page, the option "Yes" is still not selected.
    How to make it selected when clicked and open popup?

    Perhaps try moving the application to your preferred desktop and then right-click it's dock icon > options > Assign to This Desktop.

  • How do i update my mac software and how do I know which operating system I am on

    how do i update my mac software and how do I know which operating system I am on

    1. Choose About this Mac from the Apple menu to check the installed version.
    2. Incremental updates are available in the Software Update pane of System Preferences or the Mac App Store's Updates tab. The source for full version upgrades varies; 10.6 through 10.8 are in the online Apple Store, and 10.9 is in the Mac App Store.
    (95523)

  • Web pages open too small. How to make zoom setting permanent?

    web pages open too small. How to make zoom setting permanent?

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • How to make a method global so that it can be used in another component.?

    Hi,
    Is it possible to make a method global so that it can be used in another component.?
    i.e I have one component C1 and methods declared in this component M1, M2, ...
    Now I have another component C2 and in this component i want to use method M1 of component C1.
    how to do so?
    Any inputs will be appreciated.
    Thanx.

    Hi,
    As Uday said, To make the method as global of component say C1, You have to make method as interface by clicking the check box.
    Now while using the method in other component say C2, you have to follow following steps:
    1. In used component of comp. C2, add component C1.
    2. Instantiate the component atleast once in any of the method of component using code wizard option:
    'Instantiate Used Componet'.
    3. Now you can call the method of component C1 using code wizard option 'Method call in used controller'

  • How do i update & test import maps and syndication maps?

    HI,
    Can anyone guide me/ let me know the steps - how do i update & test import maps & syndication maps during upgrade in development system>
    Regards,
    Harmony

    Hello Harmony
    Different service packs SAP MDM 7.1 supprot the same Syndication and Import map format.
    For Import map is updating you can use Import manager
    For syndication map is updating - Syndicator
    If your syndication and import map have been saved into repository just archive repository from your source landscape and unarchive it in destination.
    If your syndication and import map haven't been saved  in repository.
    Exporting your maps to xml(syndication maps from syndicator and import maps from Import Manager) before migration and importing it to new repository.
    According updating(modification) repository structure:
    For Import map is updating you can use Import manager
    For syndication map is updating - Syndicator
    Another way(very exotic) - make changes in exported xml maps.
    That's all
    Regards
    Kanstantsin Chernichenka

  • MM-FM integration. How to stop update of Fund Center and Commitment Item

    Hello!
    Anyone please help. MM-FM integration.
    Our problem is after automatic creation of PR and PO from work orders, and the fund center and commitment item in the PR and PO has been changed/updated by the user, and then we change something in the work order and save it, the fund center and commitment item of the PR and PO goes back to default value (based on FMderive). Is there a way to stop this?
    Thanks in advance for your help.
    Regards,
    Rona

    It seems like you have selected "Do not overwrite target values" option in both Funds Enter and Commitment Item in the derivation rule defined.
    Go through SAP Note 666322, make sure the Trace feature in On and then choose the option "Overwrite Target Values" in both Funds Enter and Commitment Item in your derivation rule. After that, see the Difference before and after values in the trace log created after performing the derivation rule.
    I am sure this will help.
    Regards,
    Amar Lal

  • I need to update to 6.0 but it doesn't work--I've tried several times and it never gets past the stage of "connecting to update server"--so how can I update without uninstalling first and losing all my bookmarks and passwords?

    I have a MacBook Pro with Lion. Every few days Firefox will tell me, "you really need to update to 6.0," and I say, "yes please!" but then it says "connecting to update server" for ages and ages and nothing ever happens. I wouldn't mind uninstalling the old one and downloading a new one, except that I have lots of bookmarks and passwords saved, and I don't want to lose them all. So what's going on, how can I update?

    Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
    If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
    I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
    What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
    Thanks again,
    Rob

  • How I make deprecated method in JB4

    Hi, i make deprecated method like this:
    * @deprecated
    public String fillCharsToLimit(String value, int limit, char chr, boolean fromFirst) {
    value = value.trim();
    if (value == null || (value.length() == 0 && limit <= 0))
    ;//do st
    (in project properties i enable Show deprecations)
    I except that compiler say me warning.
    Its ignore deprecation in my code, but when I use deprecated method from JDK all is OK, only my method no why?
    Thanks DK

    You don't get a deprecation warning if the deprecated class or method and the code that uses the deprecated class or method are compiled at the same time. See Bug 4216683 http://developer.java.sun.com/developer/bugParade/bugs/4216683.html for details.

Maybe you are looking for

  • Video in iMovie won't play.

    I have edited an entire almost 45 minute long iMovie, but when I play it, certain videos I added and edited won't play, and the screen will stay on the picture that was shown before the video. How do I fix this?

  • Slow Wireless think i've solved problem

    Hi All, Thought I'd put this up if anynone else has had a similar problem, apologies if this has been already raised. Syptom: Wireless speeds have dropped to over half normal expected speed against a fixed wired connection using HUB 3. Fixed Ethernet

  • Flashing file Icon

    When I open my mac book there is a file icon with a question mark that flashes all the time and I can't get onto the desktop or into the system - help, please!

  • Pdf music files coming out fuzzy from pagemaker conversion

    Hello, We are using the new conversion to INdesign since our printer will not support pagemaker printing now with Indesign now on our computers.  When I try to convert a document with PDf Music files in it from pagemaker into Indesign they come out f

  • Error in Create Operation in SUP MBO Developement

    Hi all, I have created MBO with getlist RFC and I have created CREATE operation for that MBO using CREATE RFC. After that i have created two screens one for getlist and one for create. In the create screen i have configured the submit button action t