How to make use of customer reserve pricing types in copying control

Hi All
Please inform how to make use of 'customer reserve' pricing types like 'X,Y,Z & 1-9' keys in copying control.
Right now I'm on maintenance & supporting project for european client.  They used pricing type 'Z' for copying condition records from stadard sales order to returns(RE) order.  I wanted to know that what is 'Z' and how it is functioning to resolve one urgent ticket assigned to me.
Could you please guide me where should I verify its logic.
Thanks & Regards
Seshu

Hi Seshu,
Pricing type changes will done at user exit level. You may want to look at the user exit USEREXIT_PRICING_RULE (module pool SAPLV61A, program RV61AFZA)
Also, OSS note 24832 will help you to get an understanding.
Regards,
Please reward points if helpful

Similar Messages

  • Pricing type in copying control

    Dear all,
    what is used of E pricing type in copying control if i am copying from billing document to return sales document.If i am copying same price from invoice to return document which pricing type will use.
    actually i am using D right now but same pricing is not copied,so instead of this can i use E pricing type.if i'll use E pricing type what will happen.in which condition E pricing type will use.
    regards
    ajit

    actually i did stock transfer from plant to depo.ata that time assassable value of material was like 100.00 where duty will be calculate on the basis of assassable value lie on 100 with 8 percentage value will be 8.00.
    when i create sales order system will pick current price of the material like 110 .00 per quantityl but system calculating excise duty on the 100.00  not on 110.its coming correctlly if i crate sales order.but if i am creating return with reference to invoice this assassable value is not copied & system calculating excise duty on the current price which is 110..which is wrong.
    actully i have maitained assassable value in table for some cutomer & system pickid assassable from that table.thgis table is linkd with 351 Routine in pricing proceduer.if refering any document from invoice to return,everything should be copied nut its not happening.i am facing this problem last 1 month.
    please give me relevent solution.
    regards
    ajit

  • Pricing type in copy controls is changed from "D" to "B" Impact

    Hi,
    what would be major impact on pricing if pricing type in copy controls is changed from "D" to "B".
    Source document-contract
    Target document-returns, now it is D but client want it to B.
    This is not Standard, but would like to now the impacts on pricing.
    Regards,
    Vinod.

    I want the impact
    Imagine the client's original billing price was INR 500.00 but in pricing condition, INR 800.00 is maintained.  Now in this case, as you said, in copy control, if you maintain "B", then while creating return order, system will consider INR 800.00 and accordingly, credit note will also be generated.  Hence, the client is loosing the difference in excess of billing to the extent of quantity flowing in credit note.
    G. Lakshmipathi

  • Pricing type in copy control for billing documents

    Hi Experts,
    In copy control for billing documents, there is a pricing type M - copy pricing elements, turn value?
    What is the effect of this pricing type?
    thanks

    Pricing type 'M' is used in copying control - billing document to sales document and in particular for sales document type 'RK' - Invoice correct request.
    Pricing type 'M' is used as 2nd pricing type to correct the field VBRP-WAVWR with +/- sign.
    So in short, for pricing type M, no prices are re-determined, but values are corrected with +/- sign.

  • Pricing type in copy control

    Hi experts,
    I want to copy pricing elements unchanged from order to billing for this I have maintained pricing type " D - copy pricing elements unchanged  in copy control from delivery to billing at item level.
    Still the system is carrying out new pricing in billing
    I have also tried by maintainining copy control from order to billing
    Can anyone guide me for these ????

    Please check whether u have maintained any different document. procedure in billing type screen (VOFA).
    Also check at OVKK screen, u maintained a different combination  for the different document pricing procedure.
    If u maintained any diff doc. procedure in VOFA screen, please remove and see.
    do reward points if it is useful

  • Pricing Types in Copy Control

    Hi Xperts,
    Can any of you guide me the exact difference between the pricing type D: Copy pricing elements unchanged and E: Copy Pricing Elements and values unchanged which is maintained in the copy controls.
    Thanks
    Smita

    Hi,
    Just keep the cursor on the field and click on the F1 button. The system provides the details,
    D: Copy pricing elements unchanged. The system
    copies the pricing elements unchanged with automatically determined or manually entered surcharges and discounts from the reference document (scales are not read again). This means that the value remains unchanged even if the billing quantity is different to the order quantity
    does not redetermine the taxes
    E:Copy pricing elements and values unchanged. The system
    copies the pricing elements and values and automatically determined or manually entered surcharges and discounts from the reference document without changing them (scales are not read again). This means that the value remains unchanged even if the billing quantity is different to the order quantity.
    does not redetermine the taxes
    Regards

  • Pricing type of copy control in the IV billing type

    Hi Expert,
       I am facing problem on the interco invoice with IV billing type whereby while we are created a interco Sales order with normal order type ZOR and the condition pricing is as below :
    Customer pricing:
    ZR01 : 4.95 USD (direct material)
    ZR12 : 2.12 USD (Margin)
    Interco pricing (with static value)
    ZI01 : 0.24 USD (BOM cost)
    ZI12 : 4.71 USD (Margin)
    ZI30 : 1.8 USD (Mac sales)
    ZI31: 1.5 USD (Mac VA)
        As per normal that create the D/O and issue to customer invoice with the pricing as per sales order which is correct.
        Now after that we have to issue the interco invoice but the pricing is show as per below:
    ZI01 : 0.24 USD (BOM cost)
    ZI12 :
    ZI30 : 1.8 USD (Mac sales)
    ZI31:
       Question 1. Why the interco billing for ZI12 and ZI31 is unable to copy from sales order. For you information that the
    ZI12 and ZI31 having a scale as same as ZI12 and ZI12 is able to copy to customer invoice.
    customer condition price
    CnTy Material      ReSt S          Scale quantity UoM  Rate Unit per UoM Valid From Valid to
    ZR01 011-103449-01      From              20.000  EA  8.00  USD   1  EA  14.04.2011 31.12.999
                                             100.000      4.95
                                             250.000      4.49
                                             500.000      4.33
    ZR12 011-103449-01      From              20.000  EA  3.43  USD   1  EA  14.04.2011 31.12.999
                                             100.000      2.12
                                             250.000      1.92
                                             500.000      1.86
    Interco price.
    CnTy Condition type       Material      Material                     S          Scale quantity UoM  Rate Unit per UoM Valid From Valid to
    ZI01 BOM Cost(Inter-co)   011-103449-01 Handle Integrator Adjustment                               0.24  USD   1  EA  14.04.2011 31.12.9999
    ZI12 Margin(Inter-co)     011-103449-01 Handle Integrator Adjustment From              20.000  EA  7.76  USD   1  EA  16.04.2014 31.12.9999
         Margin(Inter-co)                                                                 100.000      4.71
         Margin(Inter-co)                                                                 250.000      4.25
         Margin(Inter-co)                                                                 500.000      4.09
    ZI30 Mac Sales(Inter-co)  011-103449-01 Handle Integrator Adjustment                               1.80  USD   1  EA  01.01.2014 31.12.9999
    ZI31 Mac Int VA(Inter-co) 011-103449-01 Handle Integrator Adjustment From              20.000  EA  2.00  USD   1  EA  01.01.2014 31.12.9999
         Mac Int VA(Inter-co)                                                             100.000      1.50
       Question 2. I have try to use pricing type 'B' or 'G' in the copy control(VTFL) are unable to pick up the pricing. Please help to advice.
    Thanks in advice.
    REgards,
    Jennie

    Hi Bheem,
        Do you mean that I have to click on the update button upon the release invoice and select 'C' : "Copy manual pricing elements and redetermine the others" but it is not working also. refer to screen capture below. Please help to advice how to overcome the problem Thanks.
    Regards,
    Jennie

  • Issue in Pricing Type in copy control: sales document to sales document

    Hi,
    I am trying to create a sales order with reference to quotation.
    I have a pricing procedure assigned to both documents.
    Now the business scenario is -
    1. Create a quotation. for a material of x quantity
    2. create a sales order with reference to the quotation and even if though quantity is changed in the sales order for the same material but total price should not change.
    I am trying to do this through copy control.
    in copy control for item category AGN i have selected pricing type E.  but still when i change the quantity in sales order. the total price is changing.
    can anybody help me with pricing type.
    Edited by: ankit.k.agarwal on Jun 27, 2011 9:44 AM

    Hi,
    Your pricing is in relation to quantity so when you change it price automatically Calculated by system
    For your requirement go to V/06
    go to details of condition say std PR00 and change CALCULATION TYPE as amount
    Kapil

  • How to determin the pricing procedure in copy control from invoice to so

    Hi,
    I have a request to create a sales order reference to a invoice. But in SPRO pricing procedure determination,i config different pricing procedure. 
    e.g. invoice ---procedure A
           sales order-----procedure B
    when i create the sales order , the procedure is A which is copied from invoice ,but i hope the procedure is B.
    how should i config the copy control. I have tried the B and C in pricing type of copy control.
    Thanks

    HI
    Try to maintain Different Document pricing procedure in Sale Document type and Billing type
    and also maintain settings in OVKK and test the cycle
    check and revert
    Regards,
    Prasanna

  • How do I use a custom UserInfo with a T3Client?

    This is related to my previous post, 4655. The problem is I if
    use a custom implementation of the interface
    weblogic.security.acl.UserInfo in a T3Client constructor, the
    client fails to connect. If I use
    weblogic.security.acl.DefaultUserInfoImpl, the client connects
    and disconnects without any problems. How do I use a custom
    UserInfo implementation with a T3Client?

    In don't know about the Gmail part, but for the Hotmail, try this link.
    Here's another link from a different source.

  • How to make use of adjacent data elements within the same buffer

    Hi,
             Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
             Here I also attach my VI showing what I did.
        Thank you very much in advance,
                            Suksun
    Attachments:
    wheel_encoder_1.vi ‏98 KB

    Hi Suksun,
          I hope you'll forgive me for distilling your code - mainly to understand it better.  I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array.  As in your code, the last velocity is being paired with the first position.  If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
    cheers
    Message Edited by Dynamik on 01-07-2006 03:17 AM
    Message Edited by Dynamik on 01-07-2006 03:19 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!
    Attachments:
    encoder2.GIF ‏14 KB
    encoder2.vi ‏102 KB

  • How can i use my custom login page in a custom partner application ?

    Dear All,
    I'm trying to customize a login page displayed other than the default sso login page
    by submiting my form to the regular pl/sql procedure : "PORTAL.wwptl_login.login_url"
    but i tried to type the requested partner application url in the browser i got the sso
    login page other than my custom login page. So, How can i use my custom login page in a custom partner application ?
    Regards,
    Mohammed Amin
    [email protected]

    I cannot begin to express my level of frustration. I have been trying to use the composition widget light box display for some time now. I drag the widget to my document. The default widget has three small trigger boxes and a large area made up of a forward and backward button, a background, a text box and a frame for your image.
    My steps have been …
    I click on the little trigger box.
    I click on the frame that holds the main image.
    I go to the fill menu and browse my computer for my image and then click OK.
    IT shows up on my screen. Yay
    I attempt to continue using the next two trigger boxes provided in the widget.
    After that, I add more by clicking on the little plus sign.
    This is where all heck breaks loose.
    Every single time I attempt to add thumbnails, something messes up. When I go to preview, either not all of my main images show up, or it starts with the wrong one, or some are missing. I have looked and looked for help on this and the only thing I can find is how easy it is to create a great portfolio lightbox display.  But as we know, that only works when your thumbnails are the same image as the images in your lightbox. If you want something different, you have to use the composition wizard. I am finding it extremely difficult and confusing to customize.
    Is there an exact sequence you need to use to add images to the slideshow? I am my wits end.

  • How to make use of SE37- Function Module & how to find out the table?

    Hi ,
    1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
    For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
    But after giving the particular name what should i do?
    Please help me.
    2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
    Thanks in adavnce for spending some time
    Raj.S

    Hi Raj
    Function Modules
    Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
    Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating  and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
    Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
    The Function Builder  also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
    Check this link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
    By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

  • How to make use of BAPI_CATIMESHEETMGR_CHANGE

    Hi All,
           We need to make use of BAPI_CATIMESHEETMGR_CHANGE for changing entered hours against an activity instead of adding new row for the same(BAPI_CATIMESHEETMGR_INSERT does that ) . Please guide me what all table parameters we should supply while executing this FM.
    Regards,
    Ganga.

    Hi Senthil,
    Now I have got how to make use of BAPI insert and change. But problme is when I need to add an hours entry for , say tuesaday of activity A for which already HAS monday hours,I am using  BAPI_CATIMESHEETMGR_INSERT AND IT IS ADDING ONE MORE ROW AS SHHOWN BELOW
    . But it adding new row. How top overcome this.
    <b>       Monday
          A     2</b>
    After insert
    <b>      Monday  Tuesday
          A     2
          A            3</b>
    =----
    SHould I use delete and insert.
    Please help me..;
    Regards,
    Ganga
    Message was edited by:
            Gangadharayya Hiremath
    Message was edited by:
            Gangadharayya Hiremath

  • How to make use of the presentation variable in SQL result query

    I have 2 prompts in my dashboard.
    Prompt1 decides the values of Prompt2.
    I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
    To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
    SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
    the query is resulting into
    SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
    but the value in selected_comp is "ABC".
    Can anybody help in how to make use of the presentation variable in query to get the correct value
    thanks
    Shubha

    Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

Maybe you are looking for

  • Emails going into "Junk" folder

    The default junk folder is called "Junk Email" however this one user has  "Junk" folder above that in which only emails that he receives from linkedin.com go in there. My first thought was that he has a rule sorting linkedin.com emails into that fold

  • Advice for asking the very best question. Read here first!

    Hi everyone, and welcome to the HP community forum. This area is all about users of technology helping each other. The people reading and answering your posts need help in getting you the best answer. Please read this message for insight into how to

  • So, what new features actually exist in CC Premiere vs. CS6?

    Anything new at this point? I know a feature comparision will be difficult as time goes on since the features will be regularly released but I'm curious. I'm debating, I can upgrade from CS5 to CS6 for $525 now and be good for the next few years, or

  • Debit memo and credit memo reference issue

    Dear all, Here there is case report from our clients: 1) Create a credit memo request CR 2) Post CR with billing type G2 3) Create a debit memo request DR with reference to previous billing doc G2 4) Post DR with BT L2, but it fails when it is releas

  • TS2621 Since my setting were updated I have been unable to access my emails. Any ideas why?

    My setting were updated yesterday and since then I have been unable to access my emails. Any ideas why this has happened and how I can resolve the problem? I have checked my settings and they are all fine.