How to Manage Group of database users
hellooooo
how i can create user(application administrator) who have responsability of group of user as a follow:
user administrator1
The group of users only (user1_1, user1_2, user1_3 ..... etc)
And also user administrator2
The group of users only (user2_1, user2_2, user2_3 ..... etc)
And so on
So that any one of them (administrator1, administrator2, ... etc) can create or delete or modify users and
set roles and read all roles and privileges ,only on users that belong to them (administrator1, administrator2, ... etc).
Hi Forstmanon,
As far as I know, there is no way with SQL to restrict CREATE USER or ALTER USER statements to specific user accounts.
So what you intend to do seems impossible with SQL.Correct me, what could be the problem.. ?? As they are privi's too which are assigned to specific user. :-) I agree that grouping can't be carried out.
OP,
hellooooo
how i can create user(application administrator) who have responsability of group of user as a follow:
user administrator1
The group of users only (user1_1, user1_2, user1_3 ..... etc)
And also user administrator2
The group of users only (user2_1, user2_2, user2_3 ..... etc)
And so on
So that any one of them (administrator1, administrator2, ... etc) can create or delete or modify users and
set roles and read all roles and privileges ,only on users that belong to them (administrator1, administrator2, ... etc).As you have stated, try to check the what all roles (Privileges required - precisely by User..) and assigned that privs to a specific role. Next have to two different Administrators Accounts (Perhaps, if you are providing sysdba to them, then can perform any thing across the users - grouping might not possible).
- Pavan Kumar N
- ORACLE OCP - 9i/10g
https://www.oracleinternals.blogspot.com
Similar Messages
-
How to manage and prevent database lock for database admin and development
how to manage and prevent database lock for database admin and development
[email protected]Hi,
can someone advise me some good book or even better a PDF or a white paper on the Web where it's explained well how to design and manage a relational database (that is normal forms, tuning, design, implemantation...)?
I've been working on Oracle databases for a few years as pl sql programmer, but I'd like to read something describing well the relational database theory, because I've been asked to work as database designer.There are many books available in the market, please go through this link -- http://www.amazon.com/gp/bestsellers/books/549646/ref=pd_ts_b_nav
I've been told to read "Fundamentals of Database Systems" by Ramez Elmasri, but I ask here for some more advices.I would strongly recommend reading this book, it was my best reference during my college study and even after starting my DBA career.
Thanks,
Hussein -
How to create a valid database User/Group for installing Linux 5,3
HI:
I am trying to install E-Business Suite on LINUX and gave me the following error report
Unable to validate Database User/Group :oralce /dba
Provide a valid Database User/Group for the installation.
when I was installiing on Windows, it did not gave me this error.
How do I have to crate a user/Group to install eBusiness on my Linux/
Please help
AliHi user;
hi Ali;
Yes I run as a root userKeep using root
When I use the following at the terminal
It gave me a error message
" Provide a valid Database User/Group for the installation. "
Here is what I type at the terminalIts seems normal becouse u try to create same user!
root@vis groupadd dba
root@vis useradd -g dba -d /home/oracle vis
root@vis useradd -g dba -d /home/oracle oracle Try this plz:
groupadd dba << i think this group already created!
useradd -g dba -d /home/applmgr applmgr << for apps node
useradd -g dba -d /home/oramgr oramgr << for db node
As you notice we define 2 different user under /home path!
Regards
helios -
How to manage HTML DB end users in Oracle Database 10g Express Edition?
I successfully installed Oracle XE on my Windows/XP PC.
I followed 'Getting Started Guide' and created a new application using the hr.employees table.
I could run this application by logging in as hr/hr.
How can I create other HTML DB end users to run this application?
I can only create database users in Oracle XE environment.
Help needed....This MyApp application (Application 100) was created by the HR Oracle account.
I could use
http://127.0.0.1:8080/htmldb/f?p=100
to run this application by logging in as hr/hr .
For the above URL, if I logged in as anotherOracleAccount/password, I got the 'Invalid Login Credentials' message.
As you said, I could use
http://127.0.0.1:8080/htmldb/f?p=4550
to get into HTML DB of the Oracle XE environment by logging in as anotherOracleAccount/password.
Since MyApp is using the HR-owned 'employees' table, should we grant some privileges on hr.employees to anotherOracleAccount?
I tried this, I still got the 'Invalid Login Credentials' message. -
How to manage groups centrally in SharePoint 2007 ?
In SharePoint 2007, do anyone know how to manage the groups centrally across all site collections?
For eg: If you have the same group name in all site collections, then by adding the user to one group can add him automatically
to all other groups in all other site collections.
So do you know about any tool or any plug in ??
Please help
chiragHere's a codeplex project for group syncronization:
http://spgroupsynch.codeplex.com/
Mike Smith TechTrainingNotes.blogspot.com
my SP customization book -
How to manage the payment approver users?
Hello community,
I would like to understand more on the payment approval process in SAP Business ByDesign. Despite it is quite easy to find the payment approval process in the help center, it is really hard to find how to manage to whom the payment approval request is sent. How can a system administrator can decide which users have the faculty to approve payments? How to change/update the list of approver users?
Of course I have the rights to manage all users by assigning them business roles and access rights. I have access to all workcenters.
Thank you in advance for your help.
LucaHi Luca,
You can define threshold amounts for payment approvals depending on company, payment method, and user. No task will be created if the amount of the outgoing payment is below the specified threshold.
You can define this threshold for both incoming and outgoing payments on the Fine-Tune task Business Task Management for Payment and Liquidity Management
After maintaining a threshold amount to trigger the approval process, you can define who is the approver via Application and User Management work center, Employee Work Distribution view. In the Finance and Administration group, define the approvers within Approver for Liquidity Management.
The approval task is then sent to all approvers that you've maintained. If the task is completed for one of them, the payment gets approved. If there is no approver maintained, the task is sent to all authorized managers.
Please, mark my reply as answered or helpful if this answers your question.
Additionally, I'd also suggest you to post financial related questions on the Financial Management forum (http://scn.sap.com/community/bydesignbc/fm), which would have a greater visibility from our financial experts team.
Thanks a lot.
Best Regards,
Alexandre. -
How to manage oracle 9i databases from 11g ?
Is there any option similar to 9i OEM's "Add Database to tree" in 11g ?
currently I monitor 30 databases, all running 9iR2, using enterprise manager console. I had removed Oracle 9i from my system to install 11g, so is there anyway to monitor 9i database from 11g or do I have to re-install 9i into a new home ?
My system is Windows XP and most databases are on linux.What, precisely, do you mean by "11g Enterprise manager console"? Are you talking about a web-based interface? Or a Java-based console application?
If you have not done a separate OEM install, you're most likely using the database control, as web-based interface that allows you to manage a single database. You would need to install the Grid Control in order to manage multiple databases through the same interface.
You're probably right, that's why I asked the question. Perhaps the original poster meant the "10g Enterprise Manager console". Perhaps he meant the "11g Enterprise Manager Database Control". Perhaps he meant the "11g Enterprise Manager Grid Control". Or perhaps he meant something different (i.e. SQL Developer is a console application that ships with 11g and has a variety of reporting scripts).
The OP for the 11g installation could not have possibly made a separate OEM install, OEM is not included in 11g any more and he has not mentioned trying such intall. The OP was clear enough, so IMO there is no confusion, 30 9i databases, 1 11g database. There was not a 10g in between. I would not go so far as to say an 11g grid control, since there is no such grid control, the latest version for grid control is 10.2.0.4.0 for R2 and 10.1.0.3.0 for R1. And SQLDeveloper, yes, it is a java application included with 11g, and you can launch scripts from there, but in no way it is a managing environment the way the OP pretends.
Regards.
~ Madrid
http://hrivera99.blogspot.com -
How to manage groups/users in mac os x lion
Is there a replacement for 'NetInfo Manager' in Mac OS X Mountain Lion ?
If you are wanting to re fresh a page in safari click on the clock wise arrow next to the RSS icon in the address bar. This is a link that may help http://support.apple.com/kb/HT4550
-
How to trace a particular database user ?
Everyone knows that there is an Oracle username "SCOTT" in all the database installation.
How to enable tracing for the SCOTT user, so I can can get all the tracing info of the user SQL's
Note: I know I can get the sid,serial# info and trace a particular session id, but here i wanted to trace the entire user SCOTT, no matter how many Sessions he opens.
Help me with this !!!!Phil,
The one what you listed tracing by service name is interesting, correct me if I understood it wrong way.
Lets say:
Database Host name: ABC_HOST
Database Instance & DB: ABC
Port 1521
Now I have 3 computers connecting to this database using the following TNSnames.ora
====================================
ABC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = abc_host)
(Port = 1521)
(CONNECT_DATA = (SID = ABC)
======================================
Now based on your suggestion you are saying that one computer from which I wanted to trace
the database sessions, I can create a new entry in the tnsnames.ora as follows:
====================================
ABCTRACE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = abc_host)
(Port = 1521)
(CONNECT_DATA = (SID = ABC)
======================================
Now using the DBMS monitor package i can do this to start tracing DBMS_MONITOR.serv_mod_act_trace_enable('ABCTRACE') )
Correct me if I am wrong -
How to manage affectaion of the user equipment.
Hi Experts
In the management of SAP hardware on each equipement is assigned to a user (number), please how can we make this setting on SAP, Also How can we manage this change of assignment (Changing the number) while keeping history assignments for each equipment ?
Thanks in advance.Hi Experts,
Is it possible to assign the number of the user equipment in the equipment file ( Each PC is used by a person using it ) ?
Is what we can manage this affectaion when changing the user ?
Otherwise, is there any other method to configure and manage this situation ?
Thinks in advance.
Edited by: yahya el hammami on Mar 30, 2009 7:00 PM.
Edited by: yahya el hammami on Mar 31, 2009 10:40 AM -
How to create groups and assign users thru program
Hi,
I am planning to create groups by program and assign users to them based on some condition.Once users are assigned to those groups we need to change the Language value for those users in User profile
We are using Central User Administration.
Please let me know the solution
Thanks
Bala Duvvuriprobably you can use this code to create a group
IGroupFactory groupFact = UMFactory.getGroupFactory();
IGroup group = groupFact.newGroup(wdContext.currentContextElement().getGroup());
group.commit();
for this required com.sap.security.api.jar -
How to create groups and add users?
Hello,
I have created 3 groups as Portal_Admin and added 2 users for each group.
When I am trying to grant permissions to these groups to the Applications owned by Portal30( I have logged in as portal30 at this point), I am unable to see these groups but am able to see these individual users.
I am trying to grant access to individual menu items/sub menus of a Portal Menu.
Is it correct way to do things?
Or am I wrong somewhere?
My Idea:
I would like to create 20 users 10 of each belong to particular Oracle schema and then organize these 20 as groups
who will access certain application objects.
I wanted to give Admin an option to add/del/modify users to and from a Group once initial setup is done.
We really stopped here.
Your help is appreciated.
Thanks
MadhavIt's a bug.
Type the name of the group you want to add the user to and click apply, if you typed it correctly the the group name will appear.
We are building a fix for this.
Portal PM -
How to query Group based on User? isMemberOfGroup?
EP6 SP2...
I am trying to find a way to see if a user is a member of a certain group.
But am having no luck.
I tried using the IUser.isMemberOfGroup()...
but I am not sure what the arguments(String arg0, Boolean arg1) should be.
If I want to know if the logged on user is a member of "Group A", what would my code be?
I tried...
<b>IUser User = request.getUser();
if (User.isMemberOfGroup("ExternalBW", true))
{ do this }
else
{ do that }</b>
In my case, I would have expected to <i>do this</i>.
What should the String arg be for isMemberOfGroup? The name of the group?Hello Eric,
The first argument is a Unique Group Id, you can find it in User Administration->Roles->Navigate to the role->Edit->copy the content of "Unique ID" field.
The second argument is <b>true</b> if you what to search recursively, means if the user assigned to a group.
Best Regards,
Dmtiry -
How to manage route entries on user Mac laptop?
Hi,
I have several Mac's in a small office and one has route entries no other Mac show. How can I permanently rid these entries. I have restarted the router and then the Macs and this has not worked. My route table from a netstat has some of the following entries:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.1.1 UGSc 321 0 en0
default 192.168.1.1 UGScI 1 0 en1
127 localhost UCS 0 0 lo0
localhost localhost UH 2 409 lo0
169.254 link#4 UCS 0 0 en0
172.16.97/24 link#9 UC 1 0 vmnet8
172.16.97.255 link#9 UHLWbI 3 464 vmnet8
172.16.227/24 link#8 UC 2 0 vmnet1
172.16.227.1 0:50:56:c0:0:1 UHLWI 0 10 lo0
172.16.227.255 link#8 UHLWbI 2 666 vmnet1
192.168.1 link#4 UCS 6 0 en0
192.168.1 link#5 UCSI 2 0 en1
192.168.1.1 0:26:bb:71:8a:d5 UHLWI 344 638 en0 316
192.168.1.1 link#5 UHLWI 1 0 en1
192.168.1.10 link#4 UHRLWI 0 32 en0
192.168.1.40 localhost UHS 4 312 lo0
I want to delete the routes starting 172.16.n.n and wonder how they got into the route table; what type of device they are; and how to remove them.
I am just a standard user with some limited UNIX experience. I cannot switch user to root in a Mac Terminal screen, as I do not know what the 'root' SU password is. But I have administrative user rights on the Mac and the Router.
Thanks,
DonYes.
VMWare (and Parallels as well, for that matter) offer networking services in a variety of modes: Bridging, NAT and Host-only. To be able to connect VM's "internally" for NAT and Host-only networking, VMWare itself needs to provide something like a "virtual router" for each of those services.
There are three private address spaces defined by RFC1918. 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16. In your case, your standard internal IP addresses used on your network are in the 192.168.0.0/16 class and VMWare has chosen two addresses in the 172.16.0.0/12 range for vmnet1 and vmnet8.
eliminating them will kill network connectivity for your VM's. Plus, the next time you reboot, VMWare will just recreate them anyway - you can see the kernel messages in the Console. -
How to create global groups for end users
Just started deployment of Lync 2013. We do not host our exchange / mail internally. It is a hosted solution (not exchange). We do use outlook though.
It has been a long time since I set up Lync (Since OCS 2007 / 2007 R2)
Can someone please tell me how to create groups for all users on the Lync Client and populate them from groups in AD.Right now we are using Spark and we have decided to use Lync. In Spark it queries AD every day and populates the groups from AD
groups that we have defined.
I know that users can create there own groups, but we prefer to have every client have every group (department) and those in department listed below rather than them have to manually add them individually.
Thanks for your direction.
JohnHello john,
Lync Client can't use AD group or Exchange mail group. You can't create Lync client group with AD GPO. each Lync user can create their own group in Lync client and of course can delete.
You can not manage Lync client within the
group as the centeral. There is no such
feature in Lync. you can examine 3rd party applications. for example ;
http://www.vytru.com/contacts-manager-for-microsoft-lync.html
Regards
Zulfikar CAGLAR
The statement is incorrect. You CAN use Distribution Groups from Active Directory in Lync Client:
http://support.sherweb.com/Faqs/Show/how-to-add-contacts-from-distribution-lists-in-lync-2013
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you.
Maybe you are looking for
-
EPrint Print Report Not Printing
I've set up my HP Photosmart 7510 e All-In-One printer wirelessly and it works fine, but I just got an iPhone and now I'm attempting to set up ePrint. When I go on my printer and click "Print Report," I get a message that the report will take a few m
-
How can I change the color of a folder icon and also the color of the text
I am using Yosemite. Is there any way to change the color of a folder icon and also the color of the text?
-
Since the latest iTunes update, when I connect my iPhone to the PC to backup and sync, I get a window that says Ther are No Files or Folders in this view and the phone does not show up in the device list in iTunes. Anyone have a resolution to this p
-
Please help - install Instant Client on RHEL4
Can someone please give me, or point me to, a detailed step-by-step guide on how to install the instant client on Red Hat? Also, the person I am working with says I need the Oracle Advanced Networking Option and enable encryption and integrity settin
-
How to configure StorEdge 3510 as a SAN?
Hi all, just joined! We've got a StorEdge 3510 set up as a DAS (private loop mode) connected to three servers. We've gone through hell and high water getting things configured (firmware upgrades were particularly troublesome), but now that we've got