How to manage the "no data" loading in process chain

Hi,
I want to load some master data in delta mode with a process chain. The treatment works good except in one case.
If I have no data selected during the extraction ( cause the system doesn't find any data matching with the delta field ), the process chain appears in red as if some problems was encountered instead of giving a traffic light green.
How is it possible to manage this case of treatment as a normal treatment ?
Thanks for your help.

Marc,
in RSMO ,
Using Settings -> Evaluation of Requests ->
if no data is available in the system, the request
select Green (is Judged to be successful). this will cause the load to be successful if Zero records are fetched and the Process chain will not fail.
Cheers
Tushar

Similar Messages

  • How to identify the maximum data loads done for a particular day?

    Hi all,
    There is huge volume of data been loaded on a last monday, and then data was deleted from the cubes on the same day. And hence i needs to see which are all the cubes which was loaded wtih lot of records for a particular day,
    i happened to look at rsmo, i am unable to see the ods nor the cube data loads,
    were do i seet it?
    Thanks

    See if the table RSSELDONE helps. This will give you the recent data load details. Based on those loads , you can search the targets.
    And also check table TBTCO  which will give the latest job details. You will have to analyze the same jobs to know what loads were done . Give a selection for date.

  • My question is how i manage that delta infopackage in my process chain

    Hello Sir,
    i have a delta infopackage which sciduled in a process chain but it does not pick any delta i have to manualy run repair full infopackage dally and then delta comes in to picture my target is a dso so it does't have any problem.
    the datasourse is costamize
    delta pointer is cal day
    my question is how i manage that delta infopackage in my process chain

    Hi
    IS the process type "delta infopackage " is executing in the process chain or not? Plz once check in SM37 Tcode . and Why r u running the repair full request infopackage . If u miss any delta records then only u have to run the repair full request . If delta records are not extracted then better to manually extract the delta infopackage.
    Plz once check in SM37 Tcode whether the execute infopackage process step is running or not? or any error has occured in that PC.
    Thanx & Regards,
    RaviChandra

  • How to stop the data loads through process chains

    hi,
    I want to stop all the data loads to BI through Process chains where load happens periodic.
    kindly suggest how can I proceed.

    Hi,
    Goto RSPC find your PC and double click on START then change the timings, i.e. give starting date is 01.01.9999 like that Save and ACtivate the PC, it won't start till 01.01.9999.
    Thanks
    Reddy

  • How to Debug the Failed Data loads?

    Hi..All
    Can Any one plz explain How to Debug the different types of Failed Data Loads?
    Thanks & Regards
    Jonn

    Hi Jonn,
             If any data failed ....1st analyze where it occurs according to that what we have to decide...
    Analysis:
    1.Check the Status Tab in RSMO--here we can get error information
    2.Check the Details Tab in RSMO--here we can get whether extraction is completed,and where it is exactly failed i.e while updating from PSA or in Update rules etc
    3.Check the corresponding request job log in SM37.
    4.Check whether any shortdump in ST22.
    5.Check the Request status in the Target...some times activation job failed in SM37 but in the Target we found as activated.
    6.Check BD87 Transaction for any IDOC errors.
    7.Check SM58 for TRFCs
    Hope this helps u.....
    Mohan

  • How to manage the regulatory data import into specification database?

    Hi experts,
    We have a EH&S implementation project for a distribution company which has no other sap module and very limited scope.
    They want to get the 3E data, compare and update and send/updates with vendors and customers and also inteface the data with AS 400.
    They are not willing to use  the Ariel ADM tool and any other additional licensing, due to limited scope.The 3E is sending the file in xml format. So the EH&S OCC connector could be used. but this again needs the use of ehs expert, which needs additional licensing and scope increase.
    Does anybody worked on intergrating 3E data into specifications without usig ADM and OCC?
    Regards
    Milmuk

    Thanks C.B.
    Our requirement is just to import the regulatory data for the compliance check from 3E. Once the data gets captured in specification property tree, we can utilize it further. We don't have the scope and resources to make a complex design.
    If the specification system could be able to receive the regulatory content in any other file format, we can ask 3E to provide the files in that format ( if possible). As I understand,the standard systems used are IMDS or OCC or Ariel ADM. IMDS also seems to have a separate license.
    Does anybody worked on integrating 3E/regulatory  data into specifications without using ADM and IMDS? ( very much using the standard SAP out of the box functionality). We are using ECC 6 with EhP 5.
    Regards
    Milmuk

  • Master Data Loading in Process Chain

    Hello All
    I want to design process chain for Master data loading we have 8 modules in our project such as SD,MM,FI,CO,PP,QM,PM and LO how Design PC .Each Module one start varient and All Text,Attribaute and hierarchies  Loading parallel ofter one Attribute Change run this Approach is Right Please guide me
    and Module dependence are there ?
    Like First load SD then MM like please guide me
    Regards,
    Ravi

    Hi.......
    Welcome to SDN.........
    It is also possible to load like this:
    load attributes
    change run load texts in parallel
    because chnage run and texts don't disturb each other.
    If you want also to load hierarchies the following order is recommended:
    load attributes
    load hierarchies
    changerun
    texts at last or in parallel with changerun.
    And for loading diiffterent area...........first tell me which architecture you are using..........split or LSA........
    as per ur update u didnt mentioned the type of architecture wheather it split,or,LSA or some other thing which u are useing,
    if you use Split architecture the load ,GD,DP,FC from FC completion of master data COPA will start so Complusary load FC first ,,u can run simulateanously (GD,DP,FC)it will be no problemand have to cross check about configuration of ur server also ,later you can start pp,tp in case of HR it will be total independent so check when u want to load
    IN Case of LSA (layerd Scaleable architecture) first laod Masterdata .. which will same for all the Process areas (like 0costcenetr,0employee) later start the Trancation data which you feel which is important as per my knowledege go for FC in turn COPA because usually reports morely based on FC and COPA
    Hope this helps......
    Thanks==Points as per SDN........;)
    Regards,
    Debjani..........
    Edited by: Debjani  Mukherjee on Oct 22, 2008 4:03 PM

  • How to kill the present data load

    Hi All,
    I am loading data into a masterdata object and found that it is takign too long. The status is still Yellow color. I want to stop this loading and do some changes and then want to load it again. How can I stop the present load?
    Thanks,
    RPK.

    Hi RPK,
    Donot Cancel that Job.
    first you have to make sure that the Process is Related to your load.
    To find the Process id. Goto SM37 - > Double click on the Job  - > Click on Details -> there you will find the Apllication server name and the Process id.
    You Can Cancel the job in SM37 also.
    just select the your Job and click on STOP.
    if it is not getting cancelled then you cancel the Process in SM50.
    Thanks,
    -Vijay

  • How to schedule system defined info package in process chain?

    Hi
    How to schedule the system defined infopackage in process chain?
    Regards
    Saddy

    Hi Saddy,
    Hope the following links will give u a clear idea about process chains and clear ur doubts.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    Business Intelligence Old Forum (Read Only Archive)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    ****Assign Points if Helpful****
    Regards,
    Ravikanth.

  • HT4847 How i can download my backup data? And how to manage the data on i Cloud?

    How i can download my backup data? And how to manage the data on i Cloud?

    You can't download an iCloud backup, except to restore it to your device should you ever need to.
    iCloud data can be managed within the apps on your iPad.  Any changes to the data within the apps corresponding to the data you are syncing with iCloud will take place in iCloud.  You can also manage some of this data on icloud.com from your computer.
    This article explains ways to manage your iCloud storage space, should you need to reduce you iCloud storage: http://support.apple.com/kb/ht4847.

  • How to iterate the webservice Data control result set?

    Hi all,
    How to iterate the webservice Data control result set? I have an jsff page where I am displaying the single UserDetails by webservice DataContol. As per my design requirement I should iterate the DataControl resultSet to get the user details and push the same in to Managed bean. Please help me how to do this, any sample code please to iterate the resultset and get the data from it.
       <?xml version='1.0' encoding='UTF-8'?>
       <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
              xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
              xmlns:f="http://java.sun.com/jsf/core"
              xmlns:c="http://java.sun.com/jsp/jstl/core">
       <c:set var="uiBundle" value="#{adfBundle['edu.syr.oim.uiBundle']}"/>
       <af:pageTemplate viewId="/templates/jsffTemplate.jspx">
        <f:facet name="fTop"/>
        <f:facet name="fCenter">
          <af:panelGroupLayout layout="scroll" inlineStyle="width:100.0%;">
       <af:panelTabbed id="pt1">
        <af:showDetailItem text="#{uiBundle.PRIVACYFLAGS}" id="sdi4">
                <af:panelGroupLayout id="pgl4" layout="scroll">
                  <af:spacer width="10" height="10" id="s3"/>
                  <af:panelFormLayout id="pfl6">
                    <af:panelLabelAndMessage label="#{uiBundle.STUDENTEMAIL}"
                                             id="plam35">
                      <af:outputText value="#{bindings.stuEmail.inputValue}"
                                     id="ot42"/>
                    </af:panelLabelAndMessage>
                    <af:panelLabelAndMessage label="#{uiBundle.STUDENTHOMEADDRESS}"
                                             id="plam39">
                      <af:outputText value="#{bindings.stuPermAddr.inputValue}"
                                     id="ot35"/>
                    </af:panelLabelAndMessage>
                    <af:panelLabelAndMessage label="#{uiBundle.STUDENTHOMEPHONE}"
                                             id="plam40">
                      <af:outputText value="#{bindings.stuPermPhn.inputValue}"
                                     id="ot37"/>
                    </af:panelLabelAndMessage>
                    <af:panelLabelAndMessage label="#{uiBundle.STUDENTCURRENTPHONE}"
                                             id="plam42">
                      <af:outputText value="#{bindings.stuCurrAddr.inputValue}"
                                     id="ot40"/>
                    </af:panelLabelAndMessage>
                    <af:panelLabelAndMessage label="#{uiBundle.STUDENTCURRENTPHONE}"
                                             id="plam36">
                      <af:outputText value="#{bindings.stuCurrPhn.inputValue}"
                                     id="ot38"/>
                    </af:panelLabelAndMessage>
                    <af:panelLabelAndMessage label="#{uiBundle.STUDENTACAINFO}"
                                             id="plam41">
                      <af:outputText value="#{bindings.stuAcad.inputValue}"
                                     id="ot36"/>
                    </af:panelLabelAndMessage>
                    <af:panelLabelAndMessage label="#{uiBundle.EMPHOMEADDRESS}"
                                             id="plam38">
                      <af:outputText value="#{bindings.empPermAddr.inputValue}"
                                     id="ot39"/>
                    </af:panelLabelAndMessage>
                    <af:panelLabelAndMessage label="#{uiBundle.EMPHOMEPHONE}"
                                             id="plam37">
                      <af:outputText value="#{bindings.empPermPhn.inputValue}"
                                     id="ot41"/>
                    </af:panelLabelAndMessage>
                  </af:panelFormLayout>
                </af:panelGroupLayout>
              </af:showDetailItem>
       </af:panelTabbed> Above is my jsff code. Here how/where to add the phase listener to paopulate the managed bean while page render. Do I need to iterate the DC to get and push the each parameter in to ManagedBean or is there any easy way to do this by EL mapping directly at jsff. Please clarify.
    Thanks
    kln

    That is what exactly I am trying right now. I am binding each of my page fragment outputText item in to backing bean and by that way trying to populate the values.
    But the issue here is, the backing bean method doesn't getting any value until I hit any of the link or the button in the fragment. While loading the page the bean set and get is null. If i hit any link or button it is filled up with the vaule. As per my design, I would like to populate the bean method along with page load before any user action. But cant able to do this!! :(
    Below is my sample code what I am trying right now
            <af:panelLabelAndMessage label="#{uiBundle.NETID}" id="plam13">
                      <af:outputText value="#{bindings.netid.inputValue}" id="ot4" binding="#{UserDataBean.netId}"/>
           </af:panelLabelAndMessage>
    backing bean ex:
    private RichOutputText netId;
    static String netidVal;
        public void setNetId(RichOutputText netId) {
           netidVal= netId.getValue() == null? "":netId.getValue().toString();
           this.netId = netId;
        public RichOutputText getNetId() {
           return netId;
        public String getNetIdVal() {
           return netidVal;
        }Thanks
    kln

  • How to handle the error delta load?

    Hi Experts,
    We have a InfoCube include three InfoSource: 2LIS_11_VAITM, 2LIS_12_VCITM, 2LIS_13_VDITM.
    The delta load of 2LIS_12_VCITM failed on Oct 23,2006.  It blocked all of the latter data load, even though 2LIS_11_VATIM and 2LIS_13_VDITM load the data successfully.  And 2LIS_12_VCITM didn't do any load step after Oct 23, 2006.
    How should I do to fix this problem and make all of the data can be go into InfoCube correctly?
    Thanks,
    Lena

    Hi Jerome,
    Thanks so much for you help. Currently, the data loaded successfully.
    But I have another issue, because of the failed request status is red, it seems it blocked all of data to go into InfoCube (even though the delta load is successful). I can not see the new data in the InfoCube. And in the InfoCube manage, the "Request for Reporting Available" field for the successful request is null.
    How should I do?
    Thanks,
    Lena

  • How to manage the host root folder?

    I'm using iWeb08, and I'm on system OSX 10.5.8.
    Last week I flawlessly transferred my site from Apple to another host.
    My question is, to make a few simple changes to it, {mostly text and links}, do I have to load up ALL the files again to the ftp host?  I don't know how to manage the root folder yet and I don't want to clutter the folder or cause the site to malfunction.
    Is there any useful posts on managing a hosting root folder??
    Problems or thing I should know using iWeb08?
    Thanks...  Ghary.com

    Once you get to know the file structure its possible to just upload the changed files by intelligent guesswork.
    You can also look at the date on the local published files but this would be rather time consuming.
    Most FTP apps have a synchronise feature to handle this for you but you need to set this up carefully and do a test run to make sure it doesn't wipe out essential files on the server.
    If you do a lot of updates and you want to get your web pages downloading faster, an optimizer will do all the thinking for you. These screenshots are of one of Ton Brand's Optimizers - HTML Optimizer Plus
    On the first pass all the files are optimized and uploaded...
    After that, Smart Handling is turned on and only the changed files are processed...
    The original folder is 10.1 MB and the Optimized one is 7.7 MB. That's without optimizing the PNG images. The finished site downloads fast. It needs to since its designed to work on mobile devices.

  • How to extract the historical data from R/3

    hi
    I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
    how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
    regards

    Hi Satish,
    As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
    After data source enhancement it is supported to load normally because you don't get any historical data for that field.
    Best way is to take down time from the users, normally we do in weekends/non-business hours.
    Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
    1. Load set-up tables by yearly basis as a background job.
    2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
    This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
    Then after you can load all the data into BI first into PSA and then into Cube.
    Regards,
    Ravi Kanth.

  • How to correct the birth date in Apple account? How to change the numerals to English for UAE location?

    I purchased iPhone 5S and opened new Apple account with preffered language English and location UAE. I was directed to enter my birth date with only Arabic language option. There was no way to change the language or skip the step. I had to enter an arbitrary birth date to go to the next step. How to correct the birth date now and change the numerals to English?

    Solution!!
    I was finally able to get the installer build to work, even though it takes about ten minutes!!  The network and CPU activity is minimal, so I don't know what LV is waiting on during all this time?
    For this installation it appears to be related to the directory structure created by the Volume License Manager 2.1 software.  There are two sets of users at my company, LabVIEW Professional and Developer Suite, which have different license numbers and installers.  The errors were related to source files located in the Products folder of the network distribution.  My installation expected the Products folder to be in a different location that it was actually placed by the VLM software.  I copied the entire Products folder from _SourceFiles up to the LabVIEW 8.5.1 folder and now it works, although very slowly.
    LabVIEW 8.5.1
    -->_SourceFiles
        -->Bin
        -->Device Drivers
        -->Licenses
        -->Products   (original location)
        -->Signal Express
    -->Dev Suite
    -->LV Pro
    -->Products    (manual copy)
    I hope this information may be of use to NI or other users.
    Message Edited by jrjones on 08-12-2008 03:21 PM
    Message Edited by jrjones on 08-12-2008 03:23 PM

Maybe you are looking for

  • HT1338 IWEB  pages

    After my iweb was erased by an Apple Genius,. I put the information on the PAGES program. The actual site is still on the mobile me web. I am missing the iweb part  Is there a way that I can put the information back on i web so that I can publish and

  • In Regards to Flash Pro CS6, has this product been Discontinued?

    I cannot find it in the Adobe marketplace. Does the physical boxed product no longer exist or something?

  • Urgent: MAC & Windows Projector discrepancies

    Hey gang, I've run into a persistent problem here. I'm running Director MX (can't yet upgrade to 11 per client because of a few issues with incompatibility) on both a Mac G5 Quad and MacPro, there is no difference in functionality between the two sys

  • I need help with creating a rollover within an accordian

    I made a feature for my portfolio page..  when you click on an image inside an accourdian my portfolio will drop down.. the only thing im having trouble with is giving the illusion that the string is being pulled down i adjusted the states but when i

  • How do i change the java coffee icon??

    Does anyone know how to do this. I have tried the following but it did not work: public question()           super("<-- How can i change this Icon");           displayArea = new JTextArea();           getContentPane().add(new JScrollPane(displayArea)