How to identify the maximum data loads done for a particular day?
Hi all,
There is huge volume of data been loaded on a last monday, and then data was deleted from the cubes on the same day. And hence i needs to see which are all the cubes which was loaded wtih lot of records for a particular day,
i happened to look at rsmo, i am unable to see the ods nor the cube data loads,
were do i seet it?
Thanks
See if the table RSSELDONE helps. This will give you the recent data load details. Based on those loads , you can search the targets.
And also check table TBTCO which will give the latest job details. You will have to analyze the same jobs to know what loads were done . Give a selection for date.
Similar Messages
-
How to identify the project in CMOD used for a particular data source
Hi
I had a Business Content Data source which is enhanced with ZZ fields and user exit is written in CMOD.
How can i find in which project used to write the code for that particular data source.....
When i check CMOD i can find nearly 10 to 20 different projects
ThanksHi,
One simple way is goto CMOD and give project names with Z* or Y*. First findout the naming convensions following in your project and see.
Then gibe projects one by one and select COMPONENTS option and click on Display, if you find the following Function Exits means it is our DataSource project
EXIT_SAPLRSAP_001
EXIT_SAPLRSAP_002
EXIT_SAPLRSAP_003
EXIT_SAPLRSAP_004
Thanks
Reddy -
How to identify the Stanadard Extractor will support for Real time Data
How to identify the Stanadard Extractor will support for Real time Data Acquisation . Enabled
Hi
In the ROOSOURCE table you can find the extract structures, go through all the fields of the extractor and if you find all of your equired fields exist ok else try to enhance for teh needed fields and go with user exit to populate the data for that fields' -
How to identify the bill-to-site location for a customer
Hi All,
How to identify the bill-to-site location for a customer.
I want to determine the language output of the AR invoice report based on the bill-to site address.
If the bill-to site is located in Sweden, the document should be in Swedish. If the bill-to site is located outside of Sweden, the document should be in English.
I have defined a query but not able to identify from which column I can identify the bill-site-location.
select --a_bill.org_id,party_name,account_number,a_bill.CUST_ACCT_SITE_ID
from
apps.hz_parties party
,apps.hz_party_sites party_site
,apps.hz_cust_accounts b
,apps.hz_cust_acct_sites_All a_bill,
apps.hz_locations loc,
apps.hz_cust_site_uses_all u_bill,
apps.ra_customer_trx_all trx
where party.party_id=party_site.party_id
AND a_bill.party_site_id = party_site.party_site_id
AND b.party_id = party.party_id
AND loc.location_id = party_site.location_id
AND u_bill.cust_acct_site_id = a_bill.cust_acct_site_id
AND trx.bill_to_customer_id = b.cust_account_id
AND trx.bill_to_site_use_id = u_bill.site_use_id
Thanks,
JoohiHi ,
Check this apps.hz_cust_site_uses_all here site_use_code will be there , you can find Bill_To Ship_to , from there you can find the site_use_id and location Id
Thanks
Shagul -
HR - How to identify the list of infotype populated for a pernr.
Hi,
When we go to pa30 tcode, and input a pernr and press enter, we can see the list of infotype populated for the particular pernr with a "tick" symbol. I would like to know, how SAP identify the same. Is there any table in which these information is stored.
Please do let me know the detail asap. This is urgent to me.
Regards
Gopalakrishnan SHi,
You can run a report named "RPLINFC0" to get list of infoypes which are used for a PERNR.
I think its enough for you.
Regards,
Purnima -
How to Debug the Failed Data loads?
Hi..All
Can Any one plz explain How to Debug the different types of Failed Data Loads?
Thanks & Regards
JonnHi Jonn,
If any data failed ....1st analyze where it occurs according to that what we have to decide...
Analysis:
1.Check the Status Tab in RSMO--here we can get error information
2.Check the Details Tab in RSMO--here we can get whether extraction is completed,and where it is exactly failed i.e while updating from PSA or in Update rules etc
3.Check the corresponding request job log in SM37.
4.Check whether any shortdump in ST22.
5.Check the Request status in the Target...some times activation job failed in SM37 but in the Target we found as activated.
6.Check BD87 Transaction for any IDOC errors.
7.Check SM58 for TRFCs
Hope this helps u.....
Mohan -
How to update the Weekly data using BAPI for MD61
Hi All,
i have used two BAPI's in my Z program to upload data from flat file to sap-system (BAPI_REQUIREMENTS_GETDETAIL and BAPI_REQUIREMENTS_CHANGE) and i uploaded the Monthly Data from the flat file on sap system successfully.
but i have to also upload the Weekly Data on the sap system using BAPI.
is there any BAPI for the same or what can be the solution for the uploading weekly data on sap system ?
Please reply me.
Thanks in advance..
Edited by: Prajapati_Shyam on Dec 29, 2010 4:19 PMHi Jovito,
thanks for your reply,
i developed a Z program to upload monthly data as well as weekly data into tcode MD61 by selecting the radio button weekly or monthly but i am not able to upload the weekly data as i didnt' get any BAPI OR any other logic to upload weekly data Or not able to use the existing BAPI BAPI_Requirement_create , because the upload file is in monthly format.
MD61 tcode can be used for both data (Monthly or weekly data).
can you suggesst me any BAPI to upload the weekly data or any other logic for the same
thanks & regards
Prajapati -
How to find the objects that are used for a particular BEx query
Hi ,
I am preparing the inventory for BEx queries. Means for a particular BEx query I want to know the correcsponding
1. Selection screen variables
2. Characteristics
3. Restrcited, Calculated and normal key figures.
I have checked all the BEx query related tabe but unable to find the proper relation between these tables to get the desired output.
Can you help for table joins to get the output as mentioned above.
Thanks in advance.
Regards,
SaiHi,
you want find the total information about query details use the T CODE - RSRTQ.
give the proper selection then execute.
please find the doc.
RSRTQ – Query Definition – Multipurpose T-Code on BEx Queries
Thanks,
Phani. -
How to manage the "no data" loading in process chain
Hi,
I want to load some master data in delta mode with a process chain. The treatment works good except in one case.
If I have no data selected during the extraction ( cause the system doesn't find any data matching with the delta field ), the process chain appears in red as if some problems was encountered instead of giving a traffic light green.
How is it possible to manage this case of treatment as a normal treatment ?
Thanks for your help.Marc,
in RSMO ,
Using Settings -> Evaluation of Requests ->
if no data is available in the system, the request
select Green (is Judged to be successful). this will cause the load to be successful if Zero records are fetched and the Process chain will not fail.
Cheers
Tushar -
How to kill the present data load
Hi All,
I am loading data into a masterdata object and found that it is takign too long. The status is still Yellow color. I want to stop this loading and do some changes and then want to load it again. How can I stop the present load?
Thanks,
RPK.Hi RPK,
Donot Cancel that Job.
first you have to make sure that the Process is Related to your load.
To find the Process id. Goto SM37 - > Double click on the Job - > Click on Details -> there you will find the Apllication server name and the Process id.
You Can Cancel the job in SM37 also.
just select the your Job and click on STOP.
if it is not getting cancelled then you cancel the Process in SM50.
Thanks,
-Vijay -
How to Identify the Network Topology being used for a running ForeFront TMG Stand Alone array?
Hello Experts,
My client has decided to move their datacenter from one location to other including the ForeFront TMG servers which are being used as Reverse Proxy and TMG Gateway in DMZ environment.
I need to know the network topology used for this configuration so that I could chose the same topology when creating new TMG environment at new datacenter. Here are some details :
1. There are 2 TMG servers configured in a DMZ Workgroup in Stand Alone array.
2. Both servers have 3 NIC attached to them. (one has all public IPs configured, another one has internal IP address and the third one has Management IP which is used to connect the server via RDP).
3. There are more than 50 websites published via this standalone array.
I am very new to Forefront TMG technology and need to know the Topology used to create such environment.
Thanks
LalitHi,
According to your description, you can use the 3-leg perimeter network template and choose which network adapter connects to the LAN, which network adapter connects to the external network and which network adapter connects to the DMZ.
Did you set up TCP/IP settings for the three NICs? If not, please refer to the link below:
Recommended Network Adapter Configuration for Forefront TMG Enterprise Edition Servers
More information:
Microsoft Forefront TMG – How to use TMG network templates (Note:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.)
Best regards,
Susie -
How to identify the right Install Disc Version for a specific mac model???
Hello
i hope someone here can help me here...
I have 12 mac mini's and about 20 Packs of the original OSX 10.4.x CD'/DVD's (the grey ones).
How can i find out witch CD (and AHT) is the right one for witch mac mini model? They all have the line 'mac mini' but the are different Versions of OS and AHT and every time when i try this i get the wrong one for a specific model.
I have been looking for more detailed informations but can't find anything!?
Any Idea?
Why Apple does not provide a table with all Model Numbers and e.g. the fitting AHT Versions?
Heeeelp pleeeeease - i am going crazy here...
Thank's !Hello iKing
Apple keeps that info close to its chest, because the whole idea of the grey disks is to limit their currency as potential upgrade disks in the secondhand market.
So rather than post here in this user's forum, instead contact Apple and explain your problem and provide the serial numbers of your Mac minis and Apple should be able to tell you the corresponding version numbers of the relevant disks.
And after, I'd suggest use a texta/soft marker pen on the CD/DVD's to pair them with their hardware.
A spelling error was edited. -
How to decide the maximum number of elements for DMA FIFO in R series FPGA
Greetings!
I'm working on a project with NI R series PCIe-7842R FPGA board. To achieve fast data transfer I'm using target-to-host DMA FIFO. And to minimize the overhead, I'd like to make the FIFO size as large as possible. According to the manual, 7842R has 1728 kb (216KB) embedded block RAM, i.e., 108,000 I16 type FIFO elements available in theory (1728,000/16). However the FPGA had compilation error when I requested such amount of elements. I checked the manual and searched online but couldn't find the reason. Can anyone please explain? And in general, what's the max FIFO size given the size of the block RAM?
Thanks!Hey iron_curtain,
You are correct that moving larger blocks of data can lead to more efficient utilization of the bus, but that's almost certainly not the most important factor here. Assuming of course that the FIFO on the FPGA is big enough to avoid overflows, I'd expect the dominant factor to be the size of read performed on the host. In general, larger reads on the host lead to improved throughput, up to the speed of the bus. This is because FIFO.Read is a relatively expensive software operation, so it's advantageous to make fewer calls to get the same amount of data.
Note that the larger your call to FIFO.Read the larger the host buffer needs to be. Depending on your application, it might need to be several times larger than the read size. You can set the buffer size with the FIFO.Configure node.
http://zone.ni.com/reference/en-XX/help/371599H-01/lvfpgaconcepts/fpga_dma_how_it_works/ explains the various buffers involved. It's important to note that the DMA Engine moves data asynchronously from the read/write nodes on the host and fpga.
Let me know if you have any questions about any of this.
Sebastian -
How to get the list of collaboration rooms for a particular user??
Hello Experts,
I have a requirement to get the list of all the collaboration rooms for a given user. I have started developing the Web Dynpro application by reusing necessary jars required to the web dynpro application.
on some action I am trying to execute the below code:
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
which I have got from help.sap.com
But, there's some exception being raised and not able to retrieve the list of rooms.
Could somebody tell me what am I doing wrong.
Regards,
Raghu.Hi,
the below is the code that I have used to get the list of rooms. But I'm getting into the NullPointerException .
I have added the catch block for time being, but could you please let me know the reason for NullPointerException?
public void onActiongetRooms(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActiongetRooms(ServerEvent)
IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
try{
IService service = PortalRuntime.getRuntimeResources().getService(IRooms.KM_SERVICE_ID);
IRooms roomsAPI = (IRooms) service;
String roomID = "00bd6231-fdca-2c10-919c-97bf74054b7d";
IRoom room = roomsAPI.getRoom(roomID);
String roomname = room.getName();
msgMgr.reportSuccess(roomname);
} catch (NullPointerException e) {
// TODO: handle exception
msgMgr.reportException("Null Error:"+e.getMessage(), true);
catch (RoomInstantiationException e) {
// TODO: handle exception
msgMgr.reportException("Error :"+e.getMessage(), true);
//@@end
Any thoughts are much appreciated.
Thanks in advance.
Raghu -
Specifically, I need info from March 23, 2012 between the time of 7:30 and 2pm. I need it ASAP.
You can do save a screenshot of the history manager window with that history on display and print hat out.
See also:
*History Export: https://addons.mozilla.org/firefox/addon/history-export/
*[[/questions/835204]]
Maybe you are looking for
-
Problem with final issue of production order components
Hi Gurus, Currently we have a problem with the production order components. The problem is that, we needed some components (components which are categorized as dangerous goods) deleted from the production orders. So we tried to manually tick the fina
-
Bootcamp on macbook air 2013 with thumb drive
i did all the steps i had to do to get windows on my thumb drive now when i go to bootcamp on my air it asks for an iso file which i cant find. can someone help me out with this please. i can load windows 7 as bootable and it shows the start screen b
-
How to fill color in a cell having particular string when using convertto-html
Hello Scripters, I have downloaded AD health check script but I am wondering if the cell color be changed for a particular string. Like all the cells having text "Failed"..should be in red color. Here is the script- Function Getservicestatus($service
-
MY ITUNES SHUT AS IT WAS INSTALLING A NEW OPERATING SYSTEM
as i was installing the new IOS 4.3.10 on my iphone, my itunes randomly shut its self down and now my iphone is stuck with out an operating system WHAT DO I DO?
-
T2000 onboard RAID monitoring in Solaris 10
hey all, i have a new T2000 with the system disks mirrored via the hardware LSI raid controller. solaris 10 is installed. how do i get alerted as to when one of the 2 drives in the mirror taps out? i think ALOM will monitor the hard drives and genera