How to "Manually" publish WCF service in Service Registry

Since WCF service publication is not yet supported by ES Explorer for .NET, will someone know me how to do that in SAP NetWeaver CE 7.1.
I did the following:
Services Registry->Publish and picked up the WSDL from WCF, and pressed the Publish button.
Now when I go to "Service Definition" tab, and put service interface name in Find dialog box, the service appears in "Found Service Definitions:.." list, and can see details in "General" and "Endpoints" tabs in the bottom.
However, the "Classifications" and "System Details"  tab don't show anything since I just imported the standard WSDL from WCF without any SAP specific extesions.
Can I somehow manually edit them, and classify my service, since I could not do that from the ES Explorer tool?
Edited by: Fakher Halim on Dec 9, 2008 11:49 AM

Rima,
I only have publish button on my CE page. I an using  SAP NetWeaver    CE 7.1 SR5. It does not have a "Next" button on its web page. However, I could successfully do the classification of this service.
Here is what I am doing:
1. Going to the first page http://LOCALHOST:50000/index.html. Here I have 8 options, e.g. "Web Services Navigator"; "SAP NetWeaver   Administrator"; and "Services Registry".
I  click on    "Services Registry".
A new browser window opens. (I can also do the same by directly navigating to http://LOCALHOST:50000/sr and logging on).
2. The title of this page is "Services Registry".
I click on "Publish" Tab, and see "Publish Services" page underneath it. On this page I just have a single text box with accompanied label "Endpoint WSDL: " and a single yellow button "Publish"
3. When I copy paste my service WSDL, the only button I can press is "Publish" .
After pressing that button, and waiting for a few seconds a green checkbox appears with message indicating that service is successfully published. I never see the "Next" button you mentioned in your solution.
Can you please guide me on that?

Similar Messages

  • Publishing a Web ABAP Service with ABAP stack

    Hi,
    We are only running ABAP Stack (we don't have Java Stack) in a SAP ECC 6.0 version.
    We have a RFC (or BAPI), for instance BAPI_CUSTOMER_GETDETAIL.
    How could we publish a Web ABAP Service?
    Thanks.
    Regards,
    Marta.

    Hi,
    I think this could be possible,
    refer below links
    Working With Web Services From ABAP
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a4433436-0301-0010-f2a9-9281ad574054
    ABAP Web Services in the Real World
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
    Journal Part XIII: Developing ABAP WebServices
    /people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
    SAP Network Blog: BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
    /people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
    Thanks
    Swarup

  • Manual data enter into SAP Service Receipt

    Hi,
    Can anyone please tell me how to manually enter data into SAP Service Receipt?
    1. What is the transaction for that?
    2.What are the steps to do?
    I'm new to SRM. Any help will be highly appreciated...
    Thanks!
    Uma.

    Hi,
    I am not sure to understand what you mean with "sap service receipt"...
    If it is "Confirm good receipt or service" in SRM, transaction are :
    BBPCF02 to receive your own purchase order
    BBPCF03 to receive all purchase order (central recipient)
    Kind regards,
    Yann

  • BizTalk published WCF service throwing HTTP 404 error using ISA reverse proxy settings

    I have published my schemas as a WCF service from BizTalk 2010 "Publish WCF Service" wizard. I used Wcf-basicHTTP adapter in receive port. I am able to run the service successfully on localhost IIS and I tested my biztalk solution by sending request using SOAP UI and got response successfully.... Now: Actually, I need to give this service endpoint to my vendor who will send request from outside my company's network i.e. internet. In my infrastrucrue BizTalk is behind the firewall so, we setup a REVERSE proxy server at DMZ layer and it is configured properly. I have tested a simple WCF service by replacing the localhost with Proxy server configured address <DNSName> and it worked absolutely fine. But when I change localhost in my BizTalk schema based published WCF service it is not working and I am getting following error. Really strugling to get it resolved. I wasted a whole 3 days....very upset. Please help me out by giving the detailed step solution. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /BizTalkServiceInstance/MyService.svc I am surprized why other c# code based WCF services are working fine with reverse proxy settings. Server Error in '/' Application. The resource cannot be found.Is there any special things to consider Biztalk exposed wcf servcie over ssl in IIS cluster with ISA

    Hi Singam :)
    First I would start by browsing any other files (files other than the one from WCF) just to ensure that the reverse-proxy’s redirection rules are set correctly. If you get the same 404 error when you try to access other service/files “through reverse-proxy”,
    then it’s an issue in the redirection rule(s) in reverse-proxy.
    If others are fine i.e. no issue in reverse-proxy setup as such, then try the following for WCF service's web.config file. I have seen this issue in WCF service (not just BizTalk’s artifacts exposed as service in reverse-proxy). Add serviceHostingEnvironment
    config as show with in serviceModel section.
    <system.serviceModel>
    <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
    </system.serviceModel>
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How to publish a SAP Web Service in SAP XI/PI 7.0

    Hi,
    First I've to say that I'n new in this deals with SAP Web Services and SAP XI/PI.
    I've created a Web Service with TX SE80 using a standard BAPI.
    I've created the Client Proxy with TX SE80.
    I've created a Logical Port wiht TX LPCONFIG.
    I've tried this is SOAMANAGER but I have this error...
    "SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
    I would like to publish this service in my SAP XI/PI 7.0
    How can I solve the error in SOAMANAGER?
    How can I publish de SAP WS that I've created in SAP XI/PI?
    Thanks a lot.
    Waiting for your news.
    Fernando.

    Hi Dimitri,
    I had the same problem:
    "SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
    And by following Nags hints I got solution:
    1, On the system where is your service provider, run transaction SICF
    2, Execute this transaction
    3, Go to node: default_host/sap/bc/srt/wsil
    4, Right click on "wsil" -> choose "Test service" - web browser should open with XML definition of service
    5, Find your service provider. In my case it looks like this:
    <service>
    <name>ZTEST_WS</name>
    u2212
    <wsdlNamespace>
    urn:sap-com:document:sap:soap:functions:mc-style/service
    </wsdlNamespace>
    <wsdlName>service</wsdlName>
    u2212
    <wsdl>
    http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
    </wsdl>
    </service>
    5, Look for WSDL link -> in my case:
    http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
    I dont know why, but this link is different like WSDL link in service definition which I can see in SE80:
    http://xxx.yyy.com:8000/sap/bc/srt/wsdl/sdef_ZTEST_WS/wsdl11/ws_policy/document?sap-client=800
    6, Use this link (from "wsil") instead of link from SE80 in SOAMANAGER to create logical port
    7, Yours logicall port should be created without errors.
    My question - have anybody idea, why this links are different and why only that second one works?
    Peter

  • How do I manually uninstall FIM Portal and Service 2010

    I installed Forefront Identity Manager 2010 as follows:
    Server 1: FIM Sync Service
    Servers 2, 3: SharePoint Farm, FIM Portal and Service
    I've had issues from the installation. When installing FIM Portal and Service on Server 2 it failed to recognize fim sync service on server 1. We had FIM service unavailable errors in most usage scenarios (even though asmx returned service description).
    I was able to use RunAs different user to start browser as the service account used to install and run the FIM service, browse to the identity management site using
    http://localhost and saw the fim portal. I was never able to see the portal using DNS address or server name from the server 2 or any other computer on the network, or using any other account (although I checked the option to
    enable portal access for authenticated users).
    I tried to uninstall - this went through all the steps but failed during apply and did a rollback. However, subsequent attempts to change, repair or uninstall all fail with message that the site was not found, please create it...
    I would like to manually remove FIM Service and Portal and begin again. How do I manually remove FIM Service and Portal when uninstall fails?
    Thanks,
    David Saylor

    Are you getting this error message while uninstalling FIM?
    FIM Portal and Service is trying to find a site which is not there anymore.  Just add  the url which FIM was looking into the Central Administration >> Alternate Access Mappings 
    Save and exit out from Central Administration and try to uninstall now and it should work.  It worked for me.
    http://aryannava.com/2014/03/26/how-do-i-manually-uninstall-fim-portal-and-service-2010/
    Aryan Nava | Twitter: @cloudtxt | Blog:
    http://virtualizesharepoint.com
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.
    Aryan, you should convert your blog post into a Wiki article:
    http://social.technet.microsoft.com/wiki/contents/articles/23330.technet-guru-contributions-for-march.aspx
    Thanks!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • How to migrate publish service from Lightroom 4 to Lightroom 5?

    I have been upgrading from LR4 to LR5. Then I imported the LR4 catalog. But no Publish service was following to LR5.
    I have used the FLICKR plugin a lot - made more than 80 FLICKR-sets. Therefore I would be terribly sorry if I do not succeed in restoring the contact to the old service files. Does anybody know how to migrate publish services from Lightroom 4 to Lightroom 5? Very fine if it's going to be a kind of a workaround.
    Best regards
    Jimmy

    You'll need to backtrack a little, open your LR4 catalogue in LR5 and allow it to upgrade the catalogue with publish services.
    If you've done work on images in the "wrong move" catalogue, identify those images, select them, and do a File > Export as Catalog. in the "right move" catalogue, bring this work in by File > Import from Another Catalog.
    Alternatively, it may be worth looking at Jeffrey Friedl's Flickr plugin as he may have looked at this problem. Maybe someone here will know if it would help.
    John

  • How to design a wcf service for specific requirement

    i have 2 question on wcf.
    1) suppose some one develop a bus booking service using wcf and expose the same service over 2 different endpoint like tcp and http but i like to know what would be the advantage of having 2 or more endpoint for single service ? in what kind of situation
    people use this trick? discuss in details.
     2) how can i offer some extra functionality for tcp client. suppose my service has 5 function but http client can call only 2 and tcp client can call all. how do i design wcf service in this way. any idea would be appreciated. thanks

    Hi Mou_kolkata,
    >> 1)what would be the advantage of having 2 or more endpoint for single service ? in what kind of situation people use this trick? discuss in details.
    In my mind the advantage of providing different endpoints for a single service is that each endpoint could use different binding and we would use different endpoints for logical grouping by function, we could also apply different levels of security
    in the binding for each endpoint. For example you can expose an interoperable endpoint for Java, PHP, ... clients and a proprietary binary endpoint which could be faster but only for .NET clients.
    Besides, please also try to check this similar thread:
    http://stackoverflow.com/questions/6033788/when-why-would-i-use-multiple-endpoints-vs-a-single-endpoint-in-a-wcf-service .
    >> 2) how can i offer some extra functionality for tcp client. suppose my service has 5 function but http client can call only 2 and tcp client can call all. how do i design wcf service in this way. any idea would be appreciated.
    An esay way is to create two services. One service is for http client with 2 functions and the other service is for tcp client with 5 functions.
    Or maybe you need do some authentication, for more information, please try to refer to:
    http://stackoverflow.com/questions/11566182/how-do-i-restrict-access-to-some-methods-in-wcf .
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can we publish Flows as Web Services in SAP BODS ? How ?

    Hello Friends,
    Can we publish Flows as Web Services in SAP BODS ? How ?
    Best Regards,
    Bheem.

    Hello
    Batch jobs and real-time services can be published via the Data Services web service.  See the Integrator Guide for full details - http://help.sap.com/businessobject/product_guides/sbods42/en/ds_42_integrate_en.pdf
    Michael

  • How to get report from BI Publisher in BIEE presentation services

    Hello all, I have installed the BIEE and BI Publisher in the same host, and I have followed the configuration in the oracle biee install documentation, but when I want to access to the BI Publisher Enterprise or get the report from the BI Publisher in the presentation services, I will get the error saying cannot access to the BIP, do I need to do any further configuration or do I need to install any other component?
    Thanks in advance~

    For me, it seems integration problem. Verify the following:
    1. Are you able to login into BI Publisher Directly? If yes,
    2. What Security Model being Setup in BI PUB? (You can verify this from xmlp-server-config.xml file)
    3. If it is XDO or BI Server ==> Password Synchronization Steps between BI Preso Services and BI Publisher.
    4. If it is BI Server ==> Create necessary roles in RPD..
    -Vency

  • How do I turn off the Genius app in App Store. I've gone to Settings/Privacy/Location Services/System Services then swiped Genius for apps 'off''. Also, I've gone to Settings/ITunes and App Stores/Click on AppleID/View Apple ID and then turn off Genius.

    How do I turn off the Genius app in App Store. I've gone to Settings/Privacy/Location Services/System Services then swiped Genius for apps 'off''. Also, I've gone to Settings/ITunes and App Stores/Click on AppleID/View Apple ID and then turn off Genius. Still nothing has worked. I'm still stuck with Genius offering the same apps to me. Mind you, once I click on the App Store there is nothing I can do but swipe left and right. There's absolutely nothing at the bottom of the screen like a features tab, nothing. There is, however, a categories button at the top, but that's it. Irrelevant.

    FWIW, I just got off the phone with Apple technical support about this.  I use Genuis for creating playlists, so I don't want to disable it, but Apple support confirmed that there is no way to avoid syncing Genius data without disabling Genius altogether.  I'd read somewhere else that subscribing to iTunes Match might allow you to avoid this, but that is NOT the case, as I've confirmed, and Apple support has confirmed.  For me, it routinely syncs thousands genius of items, so I have to allow a lot of time for my manual syncs.

  • Getting the Request Object in the EJB published as a Web Service

    Hi experts,
    I have a Portal Service that call a BAPI in a back-end system with the Connector Framework. I have a Portal Component that calls the Portal Service, passing the Locale (request.getLocale()) and the User (request.getUser()) object. It's work fine!
    I need to call the Portal Service by an EJB that is published as a Web Service. The connection between the EJB and Portal Service is ok, but I don't know how to get the Locale and the User object in the EJB to pass to the Portal Service.
    Is possible to get the request object from the HTTP SOAP Request?
    Thanks,
    Gustavo

    Hey Alice!
    The Feature Hashing module is actually a wrapper around
    Vowpal Wabbit's implementation of the murmurhash. Thus, it takes text in, and produces 2^N new features based on the text, where N is the bitsize specified in the module. These features (and not the original text!) should be used during model training.
    The Learner will then keep track of these features behind the scenes.
    When you publish your web service and these features are recomputed for new input text (same N), they are used as the features for scoring.
    Does that make sense?
    Regards,
    AK

  • OSB -How to communicate with a Asynchronous SOAP Service using OSB

    Hi,
    I am new to OSB and I need some help in working with Asynchronous SOAP Service.
    Test Case : OSB --> Proxy Service --> Business Service-->External Service pointing to Asynchronous service WSDL.
    While testing the proxy service using sb console i don't get a response back.
    After some googling I found out the following:
    ->We need to create another Proxy service for listening to callback from that Asynchronous service.
    ->Setting the "WS-replyTo" in header variable while sending the initial request to Business Service(pointing to Asynch wsdl).
    Even after this I am not getting some response.
    Questions :
    1. Can someone let me know in detailed way(end to end) what has to be done to achieve this ?
    2. The Asynch wsdl exposes only one port in the <service> tag ie., which is haing the binding related to "process" operation. ( but not processCallback operation)
    So in this case how do i make my responseProxy service listen to callback port ? When I try to do I just see the process binding only.
    Thanks and Regards,
    Sridhar.

    Vernetto,
    I am not sure about the publish, but yes we can do this without JMS also. Please refer to this post which is quite helpful which routes back to a proxy service.
    http://eelzinga.wordpress.com/2010/03/23/oracle-service-bus-invoke-asynchronous-webservices/
    Regards,
    Sridhar.

  • Can't publish to Azure Cloud Service from Visual Studio 2013

    I have a VS project that I upgraded from VS 2012 to VS 2013. I can run it locally, and had no issues publishing to Azure when I was using VS 2012. When I attempt to publish the upgraded app to an Azure Cloud Service that already exists, I am getting this
    error.  Note that I have checked the Service Config files and did a search on the entire solution and can not find any reference to "LocalStorage1" anywhere in the Project or Solution. I have another VS 20113 Project that publishes just fine
    to Azure Cloud Service. Any ideas on how to fix this?
    PUBLISH ERROR:
    Windows Azure could not find the resource LocalStorage1 in the service package. To upgrade the deployment, you must add the resource. Otherwise, perform a new deployment.

    That's actually what I meant in my first post. When publishing to a new service, it is fine, because the deployment does not have to compare what is already there (it is a new service, so nothing is there) and what is in your package. But while upgrading
    a service, bunch of settings have to match between an existing service and the package you are trying to upload. So the error you got wasn't about you having something extra in your package, but having something extra in your existing service and missing in
    the package you were uploading. Hope that helps.
    Anyway, please move this question to cloud services forums (this one is for web sites only), as there are experts in that area and they might be able to help you better.
    Thanks,
    Petr

  • How to differenciate purchase requsitions coming from services and others

    Hi,
       I would like to know how can i differenciate pr coming from services and pr coming from production.when i list the pr it is combining both.but i want the segregation of pr raised by services and others.any input...

    Hi,
    Are you able to differentiate the PR's by manually Checking them.
    If so how.Please mention the field
    Thanks & Regards
    Kishore

Maybe you are looking for