How to manually set print ordered metadata?

How do you manually set the Print ordered or printed metadata for apeture versions? I have ordered prints through other sites, (Costoc, Smugmug, Mpix...), and would like to be able to manualy set this flag for the images I have printed. Is there a way to do that or is a custom field the best I can do?

Not that I know of (without mucking inside the Aperture package). Sounds like a good use of a custom field, though. You could put in the printing service and the date -- ex: 20120122 Costco, 20120122 Mpix -- and then sort on the field to get a list in order printed, or use a Filter HUD Rule to group by printing service.
You can trigger the built-in Printed flag by ... printing-without-printing. Set up a PDF Printing Workflow that doesn't actually print, and select it from the PDF menu on the second printer dialog that comes up. You could likely automate the whole thing.

Similar Messages

How can i set print mode at run time in smartforms???

Hi expert,
In smartforms how can I set print mode at run time.
I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
If it is possible then plz give me answer asap.

Hi,
Set These settings
While calling smartform, paas control_parameters and output_options as mentioned below and set
user_settings = ' '.
It will send the smartform output to spool.
DATA: wa_output_options TYPE ssfcompop,
wa_ctrl TYPE ssfctrlop.
wa_output_options-tdimmed = 'X'.
wa_output_options-tddelete = 'X'.
wa_output_options-tdimmed = ' '.
wa_output_options-tddest = 'LOCL'.
wa_ctrl-no_dialog = 'X'.
CALL FUNCTION lv_fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = wa_ctrl
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = wa_output_options
user_settings = ' '
x_adrp = x_adrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar(Reward if helpful).

When creating a rectangle shap, how to manually set dimensions

I am creating a rectangular shape with the tool (U).
How can I manually set the dimensions (height and width).
I know I can see the dimensions with the info button in the right side bar, bug I want to edit those values.
Is this possible?

You can set the dimensions before using the rectangle tool in the
tool options bar (fixed size).
Or you can change the dimensions after, by using the move tool or Edit<Free Transform Path
and entering the dimensions in pixels (px) in the width and height boxes.
MTSTUNER

How can we set the Order block for One-Time Billto-address?

Hi Experts,
How can we set Order bolck,if user uses one-time bill to address and needs to trigger workflow for releasing process according to order block.
Please suggest me.
Thanks and Regards,
Kiran

suggest me pls!!!!

How can I set the order of search engines on my Macbook?

When I use "Manage Search Engines" to rearrange the order of my search engines, the order changes temporarily, only to revert to the order the search engine add-ons were installed, the next time Firefox is restarted. How can I set the hierarchy of search engines to suit my preference, and have it stay that way?

It may be your preferences problem.
Try to Reset your firefox and try it newly
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to automatically set Print Scaling to 'None'

Is there any way to automatically set print scaling to 'none' on an existing PDF document?
This setting is set manually by going to File > Properties, and then going to the 'Advanced' tab and changing the 'Page Scaling' preference from 'Default' to 'None'. This preference can then be saved with the document.
There seems to be no way to do this via javascript but if anyone has found a way to automate this that would be great!!!
Ideally I want to run this as a batch process across a number of PDFs. Maybe as a last resort there is a way to do this using "execMenuItem"????
Many thanks in advance for your help!!!!
HJ

Would something along these lines would work???
"if printing 1:1 is critical, my recommendation would
be to have an area on the page(s) for which scaling must be performed
where you explicitly state the requirement for no scaling AND in which
you place an line of known length, let's say an inch or a centimeter with
text that warns that if that line is not exactly at the size specified,
to reprint without scaling."
(extract from post at: http://lists.frameusers.com/pipermail/framers/2008-March/011530.html)

2012 essentials r2: how to "manually" set up host and virtualized 2012e r2?

So 2012e r2 is supposed to make it easier to setup a virtualized server.
How do we set this up? Found this for OEM partners, but looking for "manual setup" directions:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/341bd905-1d99-4e3d-af16-04aadf9e9ab9/installing-windows-server-2012-essentials-r2-hyperv-role
Can one manually install hyper-v on essentials then setup VM, and then remove some roles to get back to a leaner host? I'd like to set this up manually and add particular drivers and Intel RST management, then remove roles
thanks

OK thanks! Now some other questions:
1. From what I have been able to determine, if I install Essentials as the DC and root of the domain/forest, I don't need to have CALS for up to 25 users and up to 50 devices (which I assume are other member servers?). I don't want to deal with CALS
and I have only about 15 users, but I have 3 to 5 servers, so this is what I think I want to do, install 2012 R2 Essentials as the DC and root of the domain. Am I right about the CAL issue, that I won't need them for member servers?
2. I am migrating from SBS2008, and on the one SBS2008 server I have Exchange 2007 and SharePoint w/Companyweb. I understand that I cannot install Exchange 2013 on the DC, and also that I have to do something with Sharepoint which also does not
come with Essentials. So the question becomes whether to try to install these on VM's or to move them to member servers. I've read a lot about using Essentials on VM, but it seems with only one VM I cannot install Essentials/Hyper V on the
physical server, and then install Essentials on VM1, and there is no other VM available for Exchange & SharePoint. But then there is the suggestion in some forum responses to put Essentials as the VM1 of the 2012 R2 Std server, then put Exchange
& Sharepoint on VM2. If this is done, does the Essentials on VM1 still operate like the DC/root of domain and eliminate the need for CALS or does this all change because it is residing on a 2012 R2 Standard physical server? Without CALS, how would
you log into the physical server to start up the VM1 w/Essentials?
3. With all this in consideration, maybe this is all just too complicated to recreate all the functions of SBS2008 on one physical server? Could I not just install Essentials and SharePoint on the physical server used as the DC and root of domain and
then on a 2012 R2 member server install Exchange 2013. I can see now after going through the migration from SBS2003 to SBS2008 that having Exchange on it's own server will make upgrades in the future a lot easier.
skb

Manually set Tab Order

Is there a simple way to manually set the tab order for a few fields?
Example: 2 page form . On first page, tab thru #1-5, then tab to ONE field on page 2 then jump back to page 1 to continue? Im using Adobe Designer 7.0

Take a look at the discussions on this thread:
Gretchen Payne, "Tab Order is set correctly, but does does not work when previewing" #16, 1 Aug 2007 10:01 am

How can I set printing margins of report?

Hello,
I am trying to print programmatically a portrait of a JPEG image that has been created by a Front Panel.
I print it by creating a Standard Report.
While the JPEG image is fine, the printed image is compressed at the long edges. So, the printed image is a little bit distorted.
I change the Printing:Margins Property of the vi at the First Call of the vi, but the result is the same.
On the other hand, if I open the JPEG image with a program like Picasa and print it, the printing image is not compressed/distorted.
I attach an image of the code that is used to print the JPEG and an image that shows the Printing:Margins Property.
How can I print it correctly via LabVIEW?
Solved!
Go to Solution.
Attachments:
Print_code.JPG ‏31 KB
PrintingMargins_code.JPG ‏22 KB

Hello,
I tried the solutions that you proposed and I have the following results:
1. The solution to print the Front Panel through the invoke node of the vi's reference is not ideal, because the desirable printer cannot be chosen.
2. I cannot use the Word Report because I have not the Report Generation Toolkit for Microsoft Office.
3. I used the HTML Report and I change the print settigns by modifying the registry keys in the following folder:
"HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\PageSetup"
I can change the margin_bottom, margin_left, margin_right, margin_top, Shrink_To_Fit and assign the values 0,0,0,0,no to them.
The result in the printing image is obvious. It is no longer compressed and it is positioned almost according to the margins. Although all margins are set to 0, it has to be positioned 2cm more at left and about 2cm higher to be proper.
But the footer and header registry keys even if they are deleted (I cannot assign empty string from command line), they are appeared in the printed page.
I attach the new vi files that modify the registry keys of the above folder before printing and restore them after printing.
Also, the Front Panel size of the Report.vi has been changed and set equal to the A4 paper size 21x29cm and a little bit bigger in order not to print the decoration border.
So, the problem of proper printing of HTML report remains having only to remove the footer & header and understand why the printing image is not positioned at full left and full top even if the registry keys margin_left and margin_top are 0 and 0.
On the other hand, if the vi's Front Panel JPEG image is printed from a Photo-program, it is printed correctly given that the margins are set to 0 and the "Scale" option has been disabled.
Thank you very much for your help.
I am looking forward to hearing from you if it is possible.
Attachments:
PrintReport.vi ‏336 KB
Report.vi ‏6 KB

HP 8600 911g - connected to Imac 24; Maverick OS; how to change pages printing order

HP 8600 911g - connected to Imac 24; Maverick OS; how does one change pages printing order

Hi Dave 6373,
I understand you have an Officejet 8600 that you're using with 10.9 and would like to know how to change the order the pages print in. I will do my best to assist you in resolving this issue!
From my browsing our 10.9 Mac I was able to find the setting I believe you are looking for. You will want to open the program/document you're printing with and select File and Print. You will then see a screen similar to the one in the screen shot below. You'll want to select Paper Handling and then under page order change it as you wish. You can also save this as a preset by clicking where it says Default settings (next to Presets: ) and choosing the Save option.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How Do I Set Printer to Work Wirelessly?

Help! I have a new MacBook Pro and a HPC4780 printer and am trying to get the printer to work wirelessly. The HP person walked me through the printer set up over the phone and the printer itself works. However, it will not print off my computer. I have an airport express router. When I ran the test on the printer I received a Failed response for " Network Name (SSID) found". I would appreciate any guidance at this time. Am getting frustrated! Thanks.

Hello Anne.
I'm more than happy to help you through the steps. But the more I think about how it can impact your Mac's ability to connect to the Net and your beginner status then I think we should try a different tack. Obviously your Mac has no issue connecting to your network and is currently working fine so I suggest we need to confirm all these network settings in the Mac and then somehow check what the printer is set to.
I have to inform you that I have an Airport Extreme, not an Express, so apologies to you now if some of the steps don't apply. Also, changing the settings in the Mac will impact your ability to connect to your wireless network and most likely the Internet. If you don't feel comfortable with changing these Mac network settings and impacting your ability to connect to the Net then it might be best to leave things alone and get some help from the Apple store. If you are confident with the Mac then here's some steps...
So open the Airport Utility, you should see your Airport Express in the list of the devices in the left column and in the right pane some information about the device. At the bottom of this pane is the Manual Setup button - press this.
The new view will now show several icons in the toolbar. The one you want is Airport, which is probably selected by default. With the Airport icon selected you will see several buttons below it, such as Summary, Base Station, Wireless and Access Control. Press Wireless. This is where you will see your wireless network name (SSID) and the type of wireless security being used. Write down your network name and the type of security you are using. Note that the password is not shown here so hopefully you know what you set previously.
With the Airport Utility still open press the Advanced icon in the toolbar. Under the 'Logging and Statistics' tab is the button 'Logs & Statistics'. Press this and then press the Wireless Clients button. This will show all the devices currently connected to the Airport Express. The names of the computers is not shown - only their network address so you would need to know what the HP network address (also called MAC address) is to see if it was one of the connected devices. I would expect that based on the error you got before this printer is not showing in the list. You may have to check your HP documentation to determine what its MAC address is.
With the Airport Utility still open go back through the steps the HP support got you to do to connect the device to your network, using the information you obtained from the Airport Utility. If the device appears to connect to your network then you can check the Wireless Clients view of Airport Utility to see if it shows the HP connection.
Hope this helps you. Please reply if you need more assistance.

How can i set the order of my accounts in favourite folders compact view? the order of the accounts in this view is different from the original order :(

i set up the desired order of the accounts (tools/options/advanced/general/config editor/mail.accountmanager.accounts) and when i switch to favourite folders compact view (view/folders/favourite + compact view), the order is totally different, hence i dont have the desired order in this view, but i want to use tb in this view, because this is the most appropriate to manage multiple folders, thank you for your help in advance, Joe (win7)

You could have used this extension.
https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/
I don't think manually changing things via config editor is a good idea. You may reverse those changes before trying the extension.

How can I set print paper quality in Aperture

I have recently converted from IPhoto to Aperture. Great but for one thing. In IPhoto when I send to print to my Canon ip5200r it prompts me for type of paper. In Aperture I can't find how to change papaer setting. All prints are coming out low quality. Any ideas??

Can I direct you to a great online resource that covers all aspects of Aperture and printing:
http://digitalmedia.oreilly.com/2007/02/13/insideaperturepodcast-9.html

How do you set Tab Order using the Articles window in CC?

I am in CC 9.2.
The work flow I described below was working but then I upgraded and alas no joy.
The instruction I found here seems to be obsolete for cc9.2. Tab order through the articles doesn't seem to work any longer.
Basically. I have a log form with 3 text columns and 3 checkbox columns.
I created the first group of fields.
I created the article as instructed.
I then stepped and repeated 10 times.
When exporting to an interactive PDF, its not flowing in the order that I listed them
As the other user stated "object/interactive/tab order" window is way to painful of a process. Can anyone help?

I guess this confirms. Adobe... it worked before... do I need to down version my files? Because I have over a hundred forms I need to create and manually having to set each text box is going to be a major time and budget issue.

How Do I Set Print Quality in PSE 10 to above 720 DPI?

Hello Everyone,
I am trying to print a 4888px x 3456px (A4 aspect ratio) to an A4 sheet from an Epson SC-P600 inkjet printer.
In the PSE 10 Print Dialog Box I have set PSE to Manage Colours and selected my printer ICC profile. From the Print Dialog Box's "More Options" window I click Printer Preferences and set the Print Driver's Print Quality to SuperPhoto 5760dpi x 1440dpi.
After clicking OK a few times to get back to the PSE10 Print Dialog Box, I see 720 DPI as the Print Quality value at Item 2 - Printer Settings on the right hand side of the PSE print dialog box. Even if I change the printer driver's print quality to 1440dpi x 1440 dpi, the print quality value remains at 720 DPI at item 2 in the PSE print dialog box.
I expected to see a value of either 1440 DPI or 5760 DPI values in the PSE print dialog box after setting the print quality in the printer driver.
How can I tell the PSE10 print dialog box that my printer is set to 1440dpi, or higher, or will the printer still print at the the printer driver's setting regardless of the DPI value in the PSE print dialog box?

save your settings as a preset... after you click print and change your settings... click on the Presets drop down and save as... it defaults to the last used preset provided you saved your changes.

How to manually set print ordered metadata?

Similar Messages

Maybe you are looking for