How to map customer field to standard field using BAPI_PO_CREATE1 ?

Hi,
i am trying to transfer a customer field from SRM to ECC60 through BAPI_PO_CREATE1;
In SRM the EAN field does not exist; Thus we have created it.
While transfering the PO to ECC, we try tu use BBP_PO_INBOUND_BADI to map the SRM field to the EAN11 field in EKPO.
However, we do not find the EAN11 field in the BAPIPOITEM structure.
Steps already done :
BBP_CUFMAP
How do we map a customer field coming from an external system to an ECC standard field ?
Kind regards,
Yann

interface name is: SalesOrderCreateRequestConfirmation_In
have a look at this link to get some more details:
http://help.sap.com/esoa_erp2005/helpdata/en/44/62e384e370311de10000000a155369/frameset.htm
is that what you need?

Similar Messages

  • How to handle custom field  using BAPI_PO_Create1

    i  used to bapi_po_create1 to upload purchase order. in purchase order one custom field in item level warranty.
    in CI_EKOPODB . I was send custom data in bapi using EXTENSIONN. BUT I GOT
    ERROR PLEASE ENTER VALUE IN WARRANTY AND
    Error transferring ExtensionIn data for enhancement CI_EKPODB.
    IN A FORUM I GOT ANSWER TO IMPLEMENT BADI  ME_BAPI_PO_CUST. BUT I AM NOT KNOW HOW TO IMPLEMENT IT PLEASE GUIDE ME.
    PRANESH
    Edited by: Praneshom on Mar 31, 2011 11:26 AM
    Edited by: Praneshom on Mar 31, 2011 11:28 AM
    Moderator message: please do not post in all upper case.
    Edited by: Thomas Zloch on Mar 31, 2011 11:48 AM

    hi Diwakar.
    my warranty field is int4  length 10.
    I am already  use BAPI_TE_MEPOITEM.
    bapi_te_mepoitem-po_item = h_item..
    bapi_te_mepoitem-warrenty = '6'.
    WRNTY = bapi_te_mepoitem-warrenty.
    CONDENSE wrnty.
    CONCATENATE bapi_te_mepoitem-po_item WRNTY INTO POIT  SEPARATED BY SPACE.
    MOVE 'BAPI_TE_MEPOITEM' TO i_extensionin-structure.
    MOVE POIT TO i_extensionin-valuepart1.
    APPEND i_extensionin.
    bapi_te_mepoitemx-po_item = h_item.
    bapi_te_mepoitemx-warrenty = 'X'. "<--here the "difference"
    CONCATENATE  bapi_te_mepoitemx-po_item  bapi_te_mepoitemx-warrenty INTO POITX SEPARATED BY SPACE.
    MOVE 'BAPI_TE_MEPOITEMX' TO i_extensionin-structure.
    MOVE  bapi_te_mepoitemx TO i_extensionin-valuepart1.
    MOVE POITX TO i_extensionin-valuepart1.
    MOVE bapi_te_mepoitemx-warrenty TO i_extensionin-valuepart2.
    APPEND i_extensionin.
    Please review this code
    Thanks
    Pranesh

  • How to get custom field value in vbkd table using "SD_SALESDOCUMENT_CREATE" bapi

    Hi Experts,
    Need your help . In one program Iam using SD_SALESDOCUMENT_CREATE bapi .
    i/p for my report is am excel.
    excel is having  below formatt.
    To create salesdoc we are using SD_SALESDOC_CREATE bapi.
    but After execution of the program we are unable to find the ZZFV_SBCNT (which is custom  field) in VBKD w.r.t salesdocument.
    Need your help what we need to do to reflect the value in vbkd table.
    Here temp will contains the data from excel
    1)
    FORM f_move_header_data .
       wg_header-doc_type            = wg_temp-auart .                   "Order type
       wg_header-sales_org           = wg_temp-vkorg .                   "Sales Organization
       wg_header-distr_chan          = wg_temp-vtweg .                   "Distribution Channel
       wg_header-division            = wg_temp-spart.                    "Division
       wg_header-sales_off           = wg_temp-vkbur .                   "Sales Office
       wg_header-sales_grp           = wg_temp-vkgrp .                   "Sales Group
       wg_header-purch_no_c          = wg_temp-bstnk .                   "Customer purchase order number
       wg_header-pymt_meth           = wg_temp-zlsch  .                  "Payment Method
       wg_header-zzychan_role        = wg_temp-zzychan_role_i.           "Channel Role
       wg_header-zzysub_role         = wg_temp-zzysub_role  .            "Submitter Role
       wg_header-zzy_inv_for_opt     = wg_temp-zzinv_format  .           "Invoice Format Optio
       wg_header-ord_reason          = wg_temp-augru  .                  "Order Reason Code
       wg_header-bill_block          = wg_temp-faksp.                    "Billing Block
       wg_headerx-doc_type            = c_set .                   "Order type
       wg_headerx-sales_org           = c_set .                   "Sales Organization
       wg_headerx-distr_chan          = c_set .                   "Distribution Channel
       wg_headerx-division            = c_set.                    "Division
       wg_headerx-sales_off           = c_set .                   "Sales Office
       wg_headerx-sales_grp           = c_set .                   "Sales Group
       wg_headerx-purch_no_c          = c_set .                   "Customer purchase order number
       wg_headerx-pymt_meth           = c_set  .                  "Payment Method
       wg_headerx-zzychan_role        = c_set.                    "Channel Role
       wg_headerx-zzysub_role         = c_set .                   "Submitter Role
       wg_headerx-zzy_inv_for_opt     = c_set .                   "Invoice Format Option
       wg_headerx-ord_reason          = c_set .                   "Order Reason Code
       wg_headerx-bill_block           = c_set.                    "Billing Block
    ENDFORM.                    " F_MOVE_HEADER_DATA
    2)
    FORM f_move_item_data .
       wg_item-itm_number          =   g_itmnumber.                              "Item number
       wg_item-material            =   wg_process-matnr .                        "Material
       wg_item-target_qty          =   wg_process-target_qty.                    "Targeted Qty
       wg_item-item_categ          =   wg_process-pstyv.                         "Sales document item category
       wg_item-zzylegal_i          =   wg_process-zzlegal.                       "Legal Contract
    **********Added this line for vbkd-ZZFV_SBCNT****************************
       wg_item-zzfv_sbcnt          = wg_process-zzfv_sbcnt.      
    APPEND wg_item TO i_item.
    wg_itemx-material            =   c_set .                        "Material
       wg_itemx-target_qty          =   c_set.                         "Targeted Qty
       wg_itemx-item_categ          =   c_set.                         "Sales document item category
       wg_itemx-zzylegal_i          =   c_set.                         "Legal Contract
       wg_itemx-zzsteady_date       =   c_set .                        "Amortization Start Date
       wg_itemx-zzsteady_end_dat    =   c_set.                         "Amortization Stop Date
    **********Added this line for vbkd-ZZFV_SBCNT****************************
       wg_itemx-ZZFV_SBCNt     =   c_set.   "
       APPEND wg_itemx TO i_itemx.
       CLEAR : wg_itemx. 
    endform. 
    3)           
    FORM f_move_head_ext
    wg_extension-structure   = c_ext_vbak.
       wg_ext_vbak-zzinv_format = wg_temp-zzinv_format.
    wg_ext_vbak-zzychan_role = wg_temp-zzychan_role_i.
       wg_ext_vbak-zzysub_role  = wg_temp-zzysub_role.
       wg_extension+30 = wg_ext_vbak.
    APPEND wg_extension to i_extension.
    CLEAR wg_extension.
       wg_extensionx-structure =  c_ext_vbakx.
       wg_ext_vbakx-zzinv_format = c_set.
      wg_ext_vbakx-zzlegal      = c_set.
       wg_ext_vbakx-zzychan_role = c_set.
       wg_ext_vbakx-zzysub_role  = c_set.
       wg_extensionx+30 = wg_ext_vbakx.
       APPEND wg_extensionx TO i_extensionx.
       CLEAR wg_extensionx.
    ENDFORM.                    " F_MOVE_HEAD_EXT
    *&      Form  F_MOVE_ITEM_EXT
    *       Item Extension
    4)
    FORM f_move_item_ext .
    * Structure for BAPI parameter Extension
       wg_extension-structure = c_ext_vbap.
       wg_ext_vbap-posnr      = g_itmnumber.
       wg_ext_vbap-zzsteady_date       =   wg_process-zzsteady_date .                 "Amortization Start Date
       wg_ext_vbap-zzsteady_end_dat    =   wg_process-zzsteady_end_dat.               "Amortization Stop Date
       wg_ext_vbap-zzlegal             =   wg_process-zzlegal.                        "Legal Contract
       wg_extension+30 = wg_ext_vbap.
    APPEND wg_extension to i_extension.
    * Structure for BAPI parameter Extension - Update Indicator Fields
       wg_extensionx-structure =  c_ext_vbapx.
       wg_ext_vbapx-posnr = g_itmnumber.
       wg_ext_vbapx-zzsteady_date       =   c_set .
       wg_ext_vbapx-zzsteady_end_dat    =   c_set.
    *  wg_ext_vbapx-zzlegal             =   c_set.
    *wg_process-zzfv_sbcnt = c_set.
       wg_extensionx+30 = wg_ext_vbapx.
       APPEND wg_extensionx TO i_extensionx.
       CLEAR wg_extensionx.
    and bapi calling is like below.
    CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
         EXPORTING
           sales_header_in       = wg_header
           sales_header_inx      = wg_headerx
           logic_switch          = wg_logic_switch
           business_object       = fp_bus_obj
           status_buffer_refresh = 'X'
         IMPORTING
           salesdocument_ex      = g_sorder
         TABLES
          return                = i_return
           sales_items_in        = i_item
           sales_items_inx       = i_itemx
           sales_partners        = i_partner
           sales_conditions_in   = i_cond
           sales_conditions_inx  = i_condx
           sales_text            = i_text
           extensionin           = i_extension
         extensionex           = i_extensionx.
    still we are not getting ZZFV_SBCNT value in VBKD table w.r.t created salesdoc(g_sorder)
    Please help me from this issue.
    Thank You..

    Hi,
    Please let me know how to add custom fields in the characteristic list, My clients wants department and profit center grouping.
    Please tell me how to solve it..
    Thanks & Regards,
    Reena..

  • How to register User custom field using PHP?

    Hi!
    I am looking for a way to share user specific data between connected users. For example, all participants should know each other IDs(our own system IDs, not LCCS).
    User's custom fields looks the best solution for this, but I can't find a way to register one using PHP, while creating room.
    How to register User's  custom field using PHP? Or may be there are better solution to make such things?

    Got it, just need to add new node to UserManager collection.
    const USER_MANAGER_COLLECTION = 'UserManager';
    static private $USER_MANAGER_CUSTOM_FIELD_CONFIGURATION = array(
       'accessModel'=>self::ROLE_VIEWER,
       'publishModel'=>self::ROLE_VIEWER,
       'persistItems'=>true,
       'modifyAnyItem'=>false,
       'userDependentItems'=>true,
       'sessionDependentItems'=>false,
       'itemStorageScheme'=>self::STORAGE_SCHEME_MANUAL,
       'allowPrivateMessages'=>true,
       'lazySubscription'=>false,
       'p2pDataMessaging'=>false
    const USER_INVITE_ID_CUSTOM_FIELD = 'inviteId';
    static private function createUserManagerCustomFields($room){
       $account = self::init();
       $collection = self::USER_MANAGER_COLLECTION;
       $account->subscribeCollection($room, $collection);
       $account->createNode($room, $collection, self::USER_INVITE_ID_CUSTOM_FIELD, self::$USER_MANAGER_CUSTOM_FIELD_CONFIGURATION);

  • How to map journal fields and whats is the better  process type

    /Journal/JournalSuspenseCostCentre     NULL
    /Journal/JournalBalancingCentre     Lookup from Organisation ID
    /Journal/JournalMultiCompany     u2018Nu2019
    /Journal/JournalBatchNumber     NULL
    /Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
    /Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
    /Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
    How to map journal fields and whats is the better  process type idoc/proxies?please let me know
    Journal Line
    Multiple journal lines per header:
    Schema Element     Data
    /Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
    /Journal/JournalLine/JournalLineAccount     Bank account control Account Code
    /Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
    /Journal/JournalLine/JournalLineVolume     NULL
    /Journal/JournalLine/JournalLineDescription     Payee Name
    /Journal/JournalLine/JournalLineChequeBookReference     NULL
    /Journal/JournalLine/JournalLineMatchField     Cheque Number
    NB Contra accounting entries should be posted to:
    Schema Element     Data
    /Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
    /Journal/JournalLine/JournalLineAccount     Bank account control Account Code
    /Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
    /Journal/JournalLine/JournalLineDescription     Payee Name
    /Journal/JournalLine/JournalLineMatchField     Cheque Number
    /Journal/JournalPeriod     Current General Ledger Period
    /Journal/JournalYear     Current General Ledger Year

    It looks you are new to PI,
    you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
    Search in sdn for one end to end scenario you will understand easily
    Regards,
    Raj

  • How to map Idoc fields with external file

    Hi All,
    How to map Idoc fields with external file.
    I want to check the settings where Idoc fields are mapped with external file.
    Thanks in advance.
    Regards,
    Govind.

    If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment

  • How to populate cusotom fields using BAPI_GOODSMVT_CREATE  for MIGO

    Hi,
    I was to update custom field using BAPI_GOODSMVT_CREATE for MIGO and store it is MSEG table.
    Please tell me how to proceed.
    Moderator message: last warning, if you continue to post the same thread again, I will submit your user ID for deletion. See my comments in your previous posts.
    Edited by: Thomas Zloch on Jul 14, 2011 4:38 PM

    Hi ANID,
    Thanks for the reply.
    I have checked in the documention of the bapi and no communication structure regarding to the bapi is there so i am not able to figure out where to add the custom field so that it can be added in the MKPF table.
    Regads
    Dipak

  • Error while adding custom fields using EEWB.

    Hi
    While trying to add custom fields using the transaction EEWB i got an error message
    'No Logsys040 transport request exists for system workbench.Please let me know why it happens.
    Thanks
    sureshpaul

    closing this unresolved

  • Using ms project 2007 and vba macro to list all the custom fields used in the project?

    Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
    of the field I select is Duration1.
    I am trying to write a macro that will list all the used custom fields such as the result would look like:
    Duration1 ---> "expected duration"
    Text1       ---> "anything"
    Flag1        ---> "....."
    Number1  ---> "..............."
    Can anyone provide me with the solution?
    Regards,
    Chuck

    John,
    I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
    ' MSP Checks all Custom Task Fields
    Sub checkfields2()
    'This macro will check and report out which custom task fields are used
    'It requires Project 2002 and above as it relies on the GetField
    'and FieldNameToFieldConstant methods which were not introduced until
    '2002.
    'It does not include resource fields, however it is a simple matter to
    'do it by replacing the pjTask constant with pjResource.
    'Copyright Jack Dahlgren, Oct. 2004
    Dim mycheck As Boolean
    Dim myType, usedfields As String
    Dim t As Task
    Dim ts As Tasks
    Dim i, it As Integer
    Set ts = ActiveProject.Tasks
    usedfields = "Custom Fields used in this file" & vbCrLf
    myType = "Text"
    usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
    For i = 1 To 30
    mycheck = False
    it = 0
    While Not mycheck And (it < ts.Count)
    it = it + 1
    If Not ts(it) Is Nothing Then
    If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
    usedfields = usedfields & myType & CStr(i) & vbCr
    mycheck = True
    End If
    End If
    Wend
    Next i
    myType = "Number"
    usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
    For i = 1 To 20
    mycheck = False
    it = 0
    While Not mycheck And (it < ts.Count)
    it = it + 1
    If Not ts(it) Is Nothing Then
    If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
    usedfields = usedfields & myType & CStr(i) & vbCr
    mycheck = True
    End If
    End If
    Wend
    Next i
    myType = "Duration"
    usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
    For i = 1 To 10
    mycheck = False
    it = 0
    While Not mycheck And (it < ts.Count)
    it = it + 1
    If Not ts(it) Is Nothing Then
    If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
    usedfields = usedfields & myType & CStr(i) & vbCr
    mycheck = True
    End If
    End If
    Wend
    Next i
    myType = "Cost"
    usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
    For i = 1 To 10
    mycheck = False
    it = 0
    While Not mycheck And (it < ts.Count)
    it = it + 1
    If Not ts(it) Is Nothing Then
    If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
    usedfields = usedfields & myType & CStr(i) & vbCr
    mycheck = True
    End If
    End If
    Wend
    Next i
    myType = "Start"
    usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
    For i = 1 To 10
    mycheck = False
    it = 0
    While Not mycheck And (it < ts.Count)
    it = it + 1
    If Not ts(it) Is Nothing Then
    If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
    usedfields = usedfields & myType & CStr(i) & vbCr
    mycheck = True
    End If
    End If
    Wend
    Next i
    myType = "Finish"
    usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
    For i = 1 To 10
    mycheck = False
    it = 0
    While Not mycheck And (it < ts.Count)
    it = it + 1
    If Not ts(it) Is Nothing Then
    If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
    usedfields = usedfields & myType & CStr(i) & vbCr
    mycheck = True
    End If
    End If
    Wend
    Next i
    MsgBox usedfields
    End Sub
    This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
    Would you mind helping me achieve this?
    Thanks in advance.
    Chuck

  • How reset Acrobat form field using javascript API

    How reset Acrobat form field using javascript API

    There are several ways:
    resetForm(["Text1"]);
    or
    getField("Text1").value = getField("Text1").defaultValue;
    George

  • Customize Approval Form to add custom fields using SharePoint Designer

    Hi,
    i have a created a Custom approval workflow using SharePoint Designer 2010. This is two steps approval WF, All i did put the variable "CancelonRejection" Value "Yes" and one Approval action with 2 different users as Serial. Right now
    Status, Requested by, Consolidated comments and comment fields are available on the approval form. Now i want to add some fields with radio buttons on Approval Form, so that 1st approver can select those radio/check box. Once 1st approver will approved this
    then display all the values on 2nd approver approval from or send email to 2nd approver along with all the information from 1st approver.
    Thanks in advanced!

    Hi,
    According to your post, my understanding is that you wanted to customize Approval Form to add custom fields using SharePoint Designer.
    In the SharePoint Designer, you can customize the task form.
    Here is a great article for your reference:
    Creating Custom Workflow Task Approval Forms with SharePoint Designer 2010
    However, every task can only have one task form.
    That is to say, the two approvors will have the same task form.
    As a workaround, I recommend to customzie the task form using InfoPath.
    You can create different view for the approvors.
    You need to add form load rules to swich views based on the approvors.
    More information:
    Using Multiple Views in Customized List Forms
    Add, delete, and switch views (pages) in a form - InfoPath
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How  to add custom fields to the  sap standard  program ukm_bp_display

    How  to add new custom  fields to the  sap standard  program ukm_bp_display .
    could u  please any one help me on this?

    Hello Kumar,
    You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
    Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
    DATA: BEGIN OF gt_grid_alv OCCURS 0.
           partner LIKE but000-partner,
           credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
            INCLUDE STRUCTURE ukm_s_account.
            INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
    DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
          Gruppe Vector
            INCLUDE STRUCTURE ukm_s_bp_vector.
          Gruppe OBL = Obligo
          include structure UKM_S_BP_CMS_MALUSDSP_OUT.
            INCLUDE STRUCTURE ukm_s_display_segment.
            INCLUDE STRUCTURE ukm_s_bp_cms.
            INCLUDE STRUCTURE bus000_dat.
    *DATA:   icon(4).
          Gruppe RAST (Raster)
    DATA:
             rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
             rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
    DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
    "Summe raster 2 bis 6
    DATA:  END OF gt_grid_alv.
    Another way is you can  go  to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
    Hope this will solve yiour problems.
    Regards,
    Antony Thomas

  • How to populate custom fields in SAP standard Basic type DELFOR01(E1EDK09)

    I've a requirement to include and populate 2 custom fields in SAP standard basic type DELFOR01 and Segment E1EDK09 (it is at hierarchy level 1 ) .
    The requirement looks very simple but for this, as per my knowledge, I have to create a new  Basic type with the copy of segment E1EDK09 and attach it to outbound process code and write my own function module to populate the segments.
    It seems ok but the there are some existing codes in the user-exits for the SAP standard function module.These codes will not get triggered.(Or I've copy the user-exits code in my FM)
    Can we do it any other way to handle this kind of situation?
    Thanks in advance for your suggestions and help.

    Hi Phani,
    You have done it correctly. ECC additional data to be moved to EWM, 1. you need to enhance the CIF for master data/ bapi  to populate the data in the custom field in EWM. 2. Make your your are not enhancing only one structure. You need to do it in the CI includes so that the field is available in all the related tables/structures.
    3. The BAPI/FM which updated these tables will take care automatically to update the custom field data if the field is correctly added in all the tables.
    4. If the custom fields are added correctly and still the data is not getting saved , then need to check the mapping of the custom field and bepi extension.
    Let me know if this helps.

  • How to handle Custom field added in BP : Role Bill Account

    Hi Friends,
    I am working on an interface which creates Bill Account role for a BP but the problem is there are about 15 Custom fields added to standard BP transaction in BA role.
    As I am using BAPI_BUPA_FS_CREATE_FROM_DATA2 for creating the BP and
    BAPI_BUPA_CENTRAL_CHANGE for changing the BP role Bill Account?
    Can anyone tell me how to handle those custom fields in the existing BAPIs or there is some other way of doing it?
    Thanks in advance,
    Pradeep
    Note : Helpful answers will be rewarded.

    Hi,
    I have seen these BAPIs but are they used with normal BAPIs for BP creation and change.
    For example : I create the BP using BAPI_BUPA_FS_CREATE_FROM_DATA2 and for the Custom fields I should use these BAPIs as suggested by you alongwith the create BAPI.
    And will it work for Changing the BP also.
    Kindly clarify.
    Regards,
    Pradeep

  • In T-Code: MIRO ; how to add custom fields in Table Control

    In MIRO
    in PO Reference tabstip i want to add 2 custom fields ( say PO segment Invoice number and vechecle names i have to populate ).
    How to do dis ,
    any BADIs or any EXITS ????
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Regards,
    Ramesh.
    Edited by: Alvaro Tejada Galindo on Dec 29, 2009 11:24 AM

    ok

Maybe you are looking for