How to map multiple source structures to single target structure

Hi all,
I have the scenario of 2 input files so i am using BPM for it. I have created the message types of the 3 input files. I have to finally generate an XML file which will contain the data of all the 2 files. That is i have to do 3:1 mapping.
Source Structure of File 1:
DT_PWC_Customer
RECORDSET
CUSTOMER
 REF_NO
 CUSTOMER_NO
Source Structure of File 2:
DT_PWC_Customer
RECORDSET
METER
 REF_NO
 METER_NO
Target Structure of Final Output File:
DT_PWC_CustomerMeterData
RECORDSET
CUSTOMER_METER
 REF_NO
 CUSTOMER_NO
 METER_NO
Above nodes i have shown in a heirarchical order..nodes with same indentation are at same level.
Can anybody tell me how to do this mapping in IR in graphical editor.
RAJEEV GUPTA

Hi,
To elaborate my requirement, I want to tell that since i will be having 2 input files- one for Customer & one for Meter. I want to finally generate one XML file which will have data from both these 2 input files. That is, if Customer file has 3 records(3 REF_NO, 3 CUSTOMER_NO) and Meter file has 4 records(4 REF_NO, 4 METER_NO), the final output XML file will have 7 records(7 REF_NO, 3 CUSTOMER_NO,4 METER_NO).
Thanks,
Rajeev Gupta

Similar Messages

Mapping Multiple Source fields to Single Target Fields with differnt Values

Hello Friends,
I am having a senario where I have to mapped multiple fileds from source str. to same Idoc Fields with ( differnt default values )
E.g Source Str.
- ShopNO
- OrderTyp
Has to mapped to Idoc Str E1EDK14-Orgid.
E.g Mapping:
So when ShopNo will mapped to E1EDK14-Orgid the default value should be "MOP" & E1EDK14-Qualf should be 019
and when OrderType will be mapped to E1EDK14-Orgid the default value should be "STD" & E1EDK14-Qualf should be 012
So I tried of using node "UseOneAsMany".....but there I cant define the vaule of field orgid, and seconly how to specify the values of field Qualf?
Do i need to write my own specify function ? or I can sovle this issue using standard avaiable functions ?
Regards,

Hi Ravi,
Thanks for your reply....
I am facing following problem... when I try to duplicate the segment and do mapping....... and then when I save, I got following error msg:
The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KSCHL. Skipping mapping
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KRATE. Skipping mapping
Any suggestion ?
in other words, when I do duplicate it creates me the segment, but when I save it, it gets disappered .........
Regards,
Edited by: Shah H on Oct 26, 2009 3:17 PM

Issue-Mapping Multiple Source Occurence to Single Target Occurence

Hi Gurus,
I have a requirement where the source has occurence 0 to 4 where as the target has occurence 1 to 1 .
Let the source segment be S where the child elements for S are S1 and S2 .
S1 takes the values 1 , 2 & 3 .
S2 takes the values X , Y & Z .
I need to map S2 to target field T1 if and only if S1 has the value "2" .
How can we achieve this ? I tried using the node functions but couldn't achive as i want the 2nd value of S2 from the given set of values ( X , Y & Z ) .
Please help me out in this issue.
Thanks in advance .
Regards,
Sarat

Hi,
You can use this mapping:
S1 --> removeContext --> equalsS --> ifWithoutElse --> removeContext (used to remove suppressed values) --> T1
constant: 2 -
> / ____________/
S2 > removeContext--
> /
Hope this helps,
Edited by: Mark Dihiansan on Nov 11, 2009 1:44 PM

Multiple source values to single target in value mapping

Hi Experts,
I have to acheive below thing using value mapping.
Source                        Target
ABC                            111
CBA                            111
XYZ                             222
ZYX                             222
When I am trying to do this in ID, It is not allowing me.
Is there a way to do this?
Regards,
Prasad

Source            Target
ABC               111
CBA               111
XYZ               222
ZYX               222
For the above source and target you have to create 2 value mapping groups.
In more detail I want to say is,
1. Just create your value mapping by using Source & target Agency & Schema.
2. Create your first value mapping group which will return the traget value as '111'.
3. Create your second value mapping group within the same Agency & Schema which will return you '222'.
While creating it If get any warning just ignore it..
Note: You can add multiple value mapping groups if you have different outputs for different sources.
Regards,
Sarvesh

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1 TenderPickup
2 TenderLoan
7 TenderPickup
101 TenderPickup
102 TenderLoan
107 TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

Mapping multiple source fields to one target field

Hi,
I'd like to take the XML content fromy my outbound message and put this into a single field within my inbound message.
Please can someone suggest a suitable XSL mapping or user defined function I could use to achieve this.
Thanks,
Alan

Hi,
OK, so I now have the XML data in one wrapper tag called inbound but when this is passed to the inbound ABAP proxy I obtain the error as listed below.
Any ideas how I overcome this?
XML payload
<?xml version="1.0" encoding="UTF-8" ?>
<inbound>
<![CDATA[ <n0:outbound xmlns:n0="http://homeoffice.gov.uk/immigration/migrant/cas/bulk-cas-re" xmlns:prx="urn:sap.com:proxy:NUD:/1SAI/TASDBA95DB1CF1834B8939A:700:2008/06/25"><ApplicantID>123</ApplicantID><FamilyName>Bloggs</FamilyName><GivenName>Blogs</GivenName><Nationality>GB</Nationality><Gender>1</Gender><CountryOfBirth>GB</CountryOfBirth><PlaceOfBirth>Gloucester</PlaceOfBirth><DateOfBirth><FullDate>1976-06-23</FullDate></DateOfBirth><ApplicantPassportOrTravelDocumentNumber>123</ApplicantPassportOrTravelDocumentNumber></n0:outbound>
]]>
</inbound>
Error
Error during XML => ABAP conversion (Request Message; error ID: CX_ST_MATCH_ELEMENT; (/1SAI/TXS2EC9427C9FBC1EDCA9A0 XML Bytepos.: 48 XML Path: inbound(1) Error Text: System expected the element 'inbound')) System expected the element 'inbound'
Thanks,
Alan

LSMW - ME21 How to map multiple line items

Hi all,
I am using LSMW tool with batch input recording technique to create POs via ME21. I have defined source structures as HEAD with POSI as its subordianted structure. This settings worked perfectly for one single item line. However, it created a new transaction for each line item in the file. I did some searches in this forum and I noticed that someone suggested to dynamically set the line positon at the processing points. I tried a few times and could not get it work. Anyone knows how to map multiple items in LSMW, please help.
Here is part of my recording:
EKPO-EMATN(01)                 000995NM
EKPO-MENGE(01)                                 1      RM06E-EEIND(01)                2006.04.27             EKPO-NETPR(01)                             10         EKPO-WERKS(01)                 0001                   EKPO-LGORT(01)                 0001
My input file looks like this:
H 77777400 NB2006.05.140001001T
L000995NM00000000052006.05.15         1000010001CAON
L000998NM00000000052006.05.15         1000010001CAON
H 77777400 NB2006.05.140001001T
L000995NM00000000052006.05.15         1000010001CAON
Thanks!

Hi
If you have used a b.i. recording, all abap code is inserted in std table /SAPDMC/LSGBDC.
The program to generate the B.I. session is automatically created when you run "Create Batch Input Session" step.
What means the numbers of items you can insert depend on the totals of items you have used while creating your b.i. recording:
If you have simulated to insert only one item, you'll be able to insert only one item in your project.
So you should simulate to insert severals items not only one, but I think it should be better you use a std method to create PO by LSMW:
- Std B.I: object 0085, method 0001 (RM06EEI0);
- BAPI   : object BUS2012, method CREATEFROMDATA1
Max

Urgent ! How to add multiple JToolBars in a single JFrame

How to implement multiple JToolBars in a single JFrame
or what is the concept behind floating toolBars.If anybody can help me ,Thisis very urgent

If you insist on multiple toolbars, use the following code:
JToolBar tb1 = new JToolBar();
//add stuff
JToolBar tb2 = new JToolBar();
//add stuff
//put the toolbars on the top of the window
JPanel toolbars = new JPanel(new BorderLayout());
toolbars.add(tb1, BorderLayout.NORTH);
toolbars.add(tb2, BorderLayout.CENTER);
getContentPane().add(toolbars, BorderLayout.NORTH);Stephen

How to set multiple styles on a single component in flex ?

Hi ,
I would like to know how to set multiple styles on a single component in flex.
Can anyone give me an example as to how to set multiple styles for a single component ?
Thanks ,
Regards,
Ajantha

Hi tuliptaurus,
You can setStyleName property for chnaging the external css dynamically by using the setStyle() method ...
btn.setStyle("styleName","blendButtonSkinOther");
You can change the external css by using the styleaName property with setStyle method..the line in blue..where blendButtonSkinOther is another css class..
blendButtonSkin {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
blendButtonSkinOther {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
Thanks,
Bhasker Chari

How to delete multiple data domains with single step ?

how to delete multiple data domains with single step ?

You can go to your Endeca-Server domain home e.g.($WEBLOGIC-HOME$/user_projects/domains/endeca_server_domain/EndecaServer/bin)
run
[HOST]$ ./endeca-cmd.sh list-dd
default is enabled.
GettingStarted is enabled.
endeca is enabled.
BikeStoreTest is enabled.
create a new file from the output just with the domains that you want to delete and then create a loop
[HOST]$ vi delete-dd.list
default
GettingStarted
endeca
BikeStoreTest
[HOST]$ for i in $(cat delete-dd.list); do; ./endeca-cmd.sh delete-dd $i; done
Remember that this can not be undone, unless you have a backup.

Does anyone know how to add multiple pictures to a single frame in iMovie?

Does anyone know how to add multiple pictures to a single frame in iMovie?

Maybe you would be better off posting this in the iPhoto or iDVD categories of the forums.
http://discussions.apple.com/category.jspa?categoryID=143
http://discussions.apple.com/category.jspa?categoryID=128
The answer to your question depends on what you ant to do with the DVD.
Do you want a DVD menu, slide show etc.
iPhoto will allow you to burn straight to a DVD. Just select the album you want to burn then go to share in the tool bar and select Burn.

How to insert multiple records in a single query

Dear all,
Can you please tell
how to insert multiple records in a single query ??

INSERT INTO table_name (column_1, column_2) VALUES ('value_A', 'value_B')OR
INSERT INTO table_name
(column_1, column_2)
SELECT 'value_A', 'value_B' FROM DUAL
UNION ALL
SELECT 'value_C', 'value_D' FROM DUAL
;Edited by: Benton on Nov 9, 2010 1:59 PM

How to call multiple strus actions froma single jsp

how to call multiple strus actions froma single jsp, and that actions should be automatically called pls help me
Thanks in advance

how to call multiple strus actions froma single jsp, and that actions should be automatically called pls help me
Thanks in advance

How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

Message mapping---1 source structure and n target structures

I would like to know how many message mappings we need if we are mapping one source structure to 3 different target structures of a single receiver. I am assuming its just one message mapping.
Depending on the above answer how many interface mappings do we need.

Kalyan,
you need multi-mapping that maps one source structure to multiple target structures. Just search multi mapping in SDN and you will find many good posts.
Basically, in MM editor, go to signature tab and in the target messages add additional message types. Simple. --> Only one MM and one IM
Jayson

How to map multiple source structures to single target structure

Similar Messages

Maybe you are looking for