Issue-Mapping Multiple Source Occurence to Single Target Occurence

Hi Gurus,
I have a requirement where the source has occurence 0 to 4 where as the target has occurence 1 to 1 .
Let the source segment be S where the child elements for S are S1 and S2 .
S1 takes the values 1 , 2 & 3 .
S2 takes the values X , Y & Z .
I need to map S2 to target field T1 if and only if S1 has the value "2" .
How can we achieve this ? I tried using the node functions but couldn't achive as i want the 2nd value of S2 from the given set of values ( X , Y & Z ) .
Please help me out in this issue.
Thanks in advance .
Regards,
Sarat

Hi,
You can use this mapping:
S1 --> removeContext --> equalsS --> ifWithoutElse --> removeContext (used to remove suppressed values) --> T1
constant: 2 -
> / ____________/
S2 > removeContext--
> /
Hope this helps,
Edited by: Mark Dihiansan on Nov 11, 2009 1:44 PM

Similar Messages

Mapping Multiple Source fields to Single Target Fields with differnt Values

Hello Friends,
I am having a senario where I have to mapped multiple fileds from source str. to same Idoc Fields with ( differnt default values )
E.g Source Str.
- ShopNO
- OrderTyp
Has to mapped to Idoc Str E1EDK14-Orgid.
E.g Mapping:
So when ShopNo will mapped to E1EDK14-Orgid the default value should be "MOP" & E1EDK14-Qualf should be 019
and when OrderType will be mapped to E1EDK14-Orgid the default value should be "STD" & E1EDK14-Qualf should be 012
So I tried of using node "UseOneAsMany".....but there I cant define the vaule of field orgid, and seconly how to specify the values of field Qualf?
Do i need to write my own specify function ? or I can sovle this issue using standard avaiable functions ?
Regards,

Hi Ravi,
Thanks for your reply....
I am facing following problem... when I try to duplicate the segment and do mapping....... and then when I save, I got following error msg:
The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KSCHL. Skipping mapping
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KRATE. Skipping mapping
Any suggestion ?
in other words, when I do duplicate it creates me the segment, but when I save it, it gets disappered .........
Regards,
Edited by: Shah H on Oct 26, 2009 3:17 PM

How to map multiple source structures to single target structure

Hi all,
I have the scenario of 2 input files so i am using BPM for it. I have created the message types of the 3 input files. I have to finally generate an XML file which will contain the data of all the 2 files. That is i have to do 3:1 mapping.
Source Structure of File 1:
DT_PWC_Customer
RECORDSET
CUSTOMER
 REF_NO
 CUSTOMER_NO
Source Structure of File 2:
DT_PWC_Customer
RECORDSET
METER
 REF_NO
 METER_NO
Target Structure of Final Output File:
DT_PWC_CustomerMeterData
RECORDSET
CUSTOMER_METER
 REF_NO
 CUSTOMER_NO
 METER_NO
Above nodes i have shown in a heirarchical order..nodes with same indentation are at same level.
Can anybody tell me how to do this mapping in IR in graphical editor.
RAJEEV GUPTA

Hi,
To elaborate my requirement, I want to tell that since i will be having 2 input files- one for Customer & one for Meter. I want to finally generate one XML file which will have data from both these 2 input files. That is, if Customer file has 3 records(3 REF_NO, 3 CUSTOMER_NO) and Meter file has 4 records(4 REF_NO, 4 METER_NO), the final output XML file will have 7 records(7 REF_NO, 3 CUSTOMER_NO,4 METER_NO).
Thanks,
Rajeev Gupta

Multiple source values to single target in value mapping

Hi Experts,
I have to acheive below thing using value mapping.
Source                        Target
ABC                            111
CBA                            111
XYZ                             222
ZYX                             222
When I am trying to do this in ID, It is not allowing me.
Is there a way to do this?
Regards,
Prasad

Source            Target
ABC               111
CBA               111
XYZ               222
ZYX               222
For the above source and target you have to create 2 value mapping groups.
In more detail I want to say is,
1. Just create your value mapping by using Source & target Agency & Schema.
2. Create your first value mapping group which will return the traget value as '111'.
3. Create your second value mapping group within the same Agency & Schema which will return you '222'.
While creating it If get any warning just ignore it..
Note: You can add multiple value mapping groups if you have different outputs for different sources.
Regards,
Sarvesh

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1 TenderPickup
2 TenderLoan
7 TenderPickup
101 TenderPickup
102 TenderLoan
107 TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

Mapping multiple source fields to one target field

Hi,
I'd like to take the XML content fromy my outbound message and put this into a single field within my inbound message.
Please can someone suggest a suitable XSL mapping or user defined function I could use to achieve this.
Thanks,
Alan

Hi,
OK, so I now have the XML data in one wrapper tag called inbound but when this is passed to the inbound ABAP proxy I obtain the error as listed below.
Any ideas how I overcome this?
XML payload
<?xml version="1.0" encoding="UTF-8" ?>
<inbound>
<![CDATA[ <n0:outbound xmlns:n0="http://homeoffice.gov.uk/immigration/migrant/cas/bulk-cas-re" xmlns:prx="urn:sap.com:proxy:NUD:/1SAI/TASDBA95DB1CF1834B8939A:700:2008/06/25"><ApplicantID>123</ApplicantID><FamilyName>Bloggs</FamilyName><GivenName>Blogs</GivenName><Nationality>GB</Nationality><Gender>1</Gender><CountryOfBirth>GB</CountryOfBirth><PlaceOfBirth>Gloucester</PlaceOfBirth><DateOfBirth><FullDate>1976-06-23</FullDate></DateOfBirth><ApplicantPassportOrTravelDocumentNumber>123</ApplicantPassportOrTravelDocumentNumber></n0:outbound>
]]>
</inbound>
Error
Error during XML => ABAP conversion (Request Message; error ID: CX_ST_MATCH_ELEMENT; (/1SAI/TXS2EC9427C9FBC1EDCA9A0 XML Bytepos.: 48 XML Path: inbound(1) Error Text: System expected the element 'inbound')) System expected the element 'inbound'
Thanks,
Alan

Mapping Issue with 7 source tables and one target table in one step

Hi,
Request for a small help in OWB.
I am trying to map 7 source tables to a single target table in one step.These source tables are in Oracle 10G database but dont have PK and FK relation ship.
I am able to link one table to the target by pointing some of the columns. But when coming to the second table it is giving some error message :
Ap18003: Connection target attribute group is already connected to a incompatible data source. Use a joiner or set operator to join the upstream data first before connection it to this operator.
As per the error message I used a Join operator and tried to map the second table to the target but still giving me the same error message. Could some body give me a hand to give out from this step.
Thanks for your help in advance.
Cheers,
Krishna.

Hi,
like this:
Ingroup1
- id -> Number(9,0)
- name -> VARCHAR2(500)
Ingroup2
- my_id -> Number(9,0)
- name -> VARCHAR2(500)
Outgroup
- id -> point to target_table.id
- name -> point to target_table.name
Not:
Ingroup1
- id -> Number(9,0)
- name -> VARCHAR2(500)
Ingroup2
- name -> VARCHAR2(500)
- my_id -> VARCHAR2(9)
Regards
Detlef
null

Send Multiple field values to Single Target field in Message Mapping

Hi,
My Requirement is to Map Multiple fields to Single field in Target side.I have to send all the values concatenated and pass the same to target Field in Message Mapping.
We can use Concat function,but more that 15 fields are there.If using concat,the mapping will be complex.
Is there any way to simplify this requirement or we can use any UDF for this,kindly suggest.
Regards,
Madhu

>>>We can use Concat function,but more that 15 fields are there.If using concat,the mapping will be complex.
I don't think it's complex but just that it occupies more mapping area
Just write a simple UDF - a one line code and pass all your input variables.
return var1+var2+var3+var4+...+var15;

Load into single target table frm multiple source table in single interfac

Hi
I have four source table and a single target table.
I need to move data from either of these tables into a target table , and we have to decide the source table based on user input.
Example :
Lets say there are four tables A,B,C,D and one target table T.
If user input says A
then the data from table A will move to table T
And again , if the user says table C then data from table C will move to table T.
And we have to create only one interface for achieving this in oracle Data Integrator ( ODI ).
You can take assumptions in source and target table.

Hi ,
In ODI 11g , there are new feature callled dataset. It allows to use UNION , MINUS etc.
Google it , you will get many tutorials on Dataset. check the link
http://www.rittmanmead.com/2011/06/odi-11g-new-mapping-and-interface-features-part-1/
In your case , you can provide filter conditions on your tables i.e.
Say My target table is EMPLOYEE , My source tables are EMPLOYEE and DEPARTMENT
INSERT INTO EMPLOYEE(CUSTOMER_ID , CUSTOMER_NAME) SELECT CUSTOMER_ID , CUSTOMER_NAME from employee where 'EMPLOYEE' = :EMP
UNION DEPARTMENT_ID , DEPARTMENT_NAME from departments where 'DEPARTMENT' = :EMP ;
Just pasted the Screenshots on following page : http://oracoholic.blogspot.in/ . Have a look
Edited by: user8427112 on Jan 8, 2013 11:04 AM

Problem in work flow of PE while mapping 2 source structure into 1 target

We have scenario in BPM where in we have to mapp 2 source structure's into target.
To be more specific one structure occurance is 0 to unbounded and other one is of single occurance.
We have done the mapping with target structure and tested it manually in mapping . its working fine..
While testing it in Configuration scenario, In the workflow process i.e PE process flow, we were not able to get one of the source message structure as the input Message. Instead of two source messages, it is seen only one. Please guide us in this issue.

actually we are receiving only one message, henece we do not need a correleation. But once we receive this message we are splitting into multiple messages in the transformation step. and we use these split messages in different transformation steps. but in one of the transformation steps we are unable see one of the split messages in the transformation step(though we have used the proper container element.). Please let me know if any ideas on this.

Message mapping - Map 2 source contexts into one target context

Hi,
I have an issue as follows:
Source context 1 (defined as 1.....unbounded)
Source context 2 (defined as 1.....unbounded)
Target context 1 (defined as 1.....unbounded)
I need to map both source contexts into the single target contexts.
For example....
Source context 1 has 3 entries
Source context 2 has 2 entries
Target context would have 5 entries in total (Source context 1 and Source context 2)
I have only limited knowledge of working with multiple contexts so need a bit of advice.
Can someone provide an easy way to do this ? I'm sure there is.
Cheers
Colin.

The answer is quite simple.
Right-click on the target node in the mapping editor and select the option "duplicate subtree".
You will then have two destination nodes.
Now you can map source1 to target1 and source2 to target2

Message mapping---1 source structure and n target structures

I would like to know how many message mappings we need if we are mapping one source structure to 3 different target structures of a single receiver. I am assuming its just one message mapping.
Depending on the above answer how many interface mappings do we need.

Kalyan,
you need multi-mapping that maps one source structure to multiple target structures. Just search multi mapping in SDN and you will find many good posts.
Basically, in MM editor, go to signature tab and in the target messages add additional message types. Simple. --> Only one MM and one IM
Jayson

Multiple sources to a single table

Hi,
I have two seperate target tables from two seperate mappings. I need to determine the row count from the two tables and feed it in a seperate mapping to a single target table as two seperate attributes. My several attempts have resulted in the error "Attributes flowing into target table have different data sources". Is there someone in this forum that could recommend some solution to this. Any help would be greatly appreciated.
thanks in advance

Hi,
there are several variants:
1) insert your target table into mapping twice
2) use UNION ALL (Set operator)
Oleg

Multiple Source Structure in single flatfile using lsmw idoc method

Hi Abapers,
we have a requirement for Business partner Data mIgration into CRM system using LSMW idoc method,I got a flat file
which has multiple source structures like(header structure,Tax structure,Mailstructure,Identification structure,bankdetails structure,card strcuture........etc of 12 structures) with identification for each structure. can any one help me how to handle this in lsmw or any link of this kind of scenario will be helpful for me .
Thanks and Regards,

Hi Saeed,
For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
Regards,
Madhu.

Firefox issues with multiple users on a single computer.

I have an issue with Firefox and multiple users on my computer. There are two users setup and I'm running Win7 Ultimate x64. When the other user logs in, my settings in Firefox get screwed up somehow. Even if that user does not open Firefox.
Examples of problems this causes:
Gmail - Cannot load the standard interface, however it will load the HTML only interface.
Facebook - Cannot post anything.
vBulletin Forums - Some forums will no longer normally load - a text-only version loads as if I was browsing from a mobile device.
There may be other issues, but these are the main ones. If I clear my cookies, cache and browsing and download history, then restart Firefox, everything works again.
This seems to happen most often when the other user logs in, and uses Firefox to log on to their Gmail account.
How can I fix this?

Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Issue-Mapping Multiple Source Occurence to Single Target Occurence

Similar Messages

Maybe you are looking for