How to mark an IDOC for deletion?

Hello,
How can I mark an IDOC for deletion?
Thank you for sharing your experience.
Kind regards,
Linda

1st way:-
IDOC Related programs
1. Archive RSEXARCA and RSEXARCB
2. Delete RSEXARCD
3. Read archiveRSEXARCR
4. Restore RSEXARCL
2nd way:-
use FM EDI_DOCUMENT_DELETE .
pass the IDoc Number to it and delete the one which you want.
3rd way:-
use the tcode WE11 or program RSETESTD to delete an IDOC
but iDocs don't actually get deleted, just flagged with a deleted status (68). Transaction BD87 can do it, it does depend though on the existing Status of the iDoc though.

Similar Messages

Bapi to mark a material for deletion in a particular plant and a particula

Hi all,
can any send me the code for bapi to mark a material for deletion in a particular plant and a particular storage location
Thnaks

I would assume that it is something pretty close to this.
report zrich_0001 .
data: headdata type bapimathead.
data: plantdata type bapi_marc.
data: plantdatax type bapi_marcx.
data: sldata type bapi_mard.
data: sldatax type bapi_mardx.
data: return type bapiret2 .
data: returnm type table of bapi_matreturn2 with header line.
data: xmara type mara.
parameters: p_matnr type mara-matnr,
            p_werks type marc-werks,
            p_lgort type mard-lgort.
select single * from mara into xmara
          where matnr = p_matnr.
headdata-material        = xmara-matnr.
headdata-ind_sector      = xmara-mbrsh.
headdata-matl_type       = xmara-mtart.
headdata-STORAGE_VIEW = 'X'.
plantdata-plant    = p_werks.
plantdata-del_flag = 'X'.
plantdatax-plant   = p_werks.
plantdatax-del_flag = 'X'.
sldata-plant    = p_werks.
sldata-stge_loc = p_lgort.
sldata-del_flag = 'X'.
sldatax-plant    = p_werks.
sldatax-stge_loc = p_lgort.
sldatax-del_flag = 'X'.
call function 'BAPI_MATERIAL_SAVEDATA'
     exporting
          headdata             = headdata
          plantdata            = plantdata
          plantdatax           = plantdatax
          storagelocationdata = sldata
          storagelocationdatax = sldatax
     importing
          return               = return
     tables
          returnmessages       = returnm.
check sy-subrc = 0.
Regards,
Rich Heilman

Mark Infocube Data for Deletion

HI Everyone.
I am attempting to understand if there is a way in the Infocube to mark specific
data for deletion rather than actually delete that data using selective deletion and than
unmark it when we are ready to show the data again?
Please let me know your thoughts.
Thanks Uday

Hi Uday
There is nothing called 'marking for deletion'... The last post on this subject is what you can follow at the most i.e. delete the data from the Infocube but not from PSA and try to use it from the PSA as required.
Cheers
Umesh

How to mark an attribute 'for reference"?

Hello,
I have a Z category under the Product Hierarchy r3prodstyp and we are using two attributes under that Z category. Can someone tell me how to mark these attributes for reference.

Hi Priyanka,
Send me the same on [email protected]
Best Regards,
Pratik Patel.

How to tigger SISCSO01 Idoc for sales order confirmation

Hello Experts,
I have a requirement where in I need to send the sales order confirmation as an IDoc. I need to use SISCSO01 IDoc type for that.
Can any please tell me how to configure SAP to trigger this IDoc when ever a sales order is confirmed.
In which T-Code is this sales order confirmation is done? and how to trigger the IDoc?
Thanks,
Suma

Hi Suma,
We need to maintan BD64 and WE20 with the Idoc SISCSO01 type. This is will automatically trigger the Idoc when we create a sales order.
You need to matain NACE for tiggering the IDoc. For that use BA00 in output types and configure program RSNASTED, from rotine as ALE_PROCESSING. In default values give transmission medium as ALE and parter function as SP.
Then come back to NACE-Condtion records and maintain meduim as A and date as 4.
Please reward if helpfull.
Thanks,
Srikanth

How to generate Outbound idoc for Material Reservation

Hi Experts,
I want to send outbound IDoc when a material reservation is created with tcode MB21.
I have been working on this issue and finding the solution in SCN for a week...
I found some messages similar to this but I could not find out the correct way how to do that.
At this moment, I configured BD64/WE20 referring the following topic which seems to be feasible solution but could not find any outbound IDocs created, unfortunately.
Implement ALE_RESERVATION_CREATE
I appreciate if someone can help me how to create outbound IDoc with MB21 or advice some possibility of missing configuration or steps.
Best Regards,
Kenji

Hi;
Have been able to find the solution to create the IDoc MRESCR after entering a reservation?
I am in the same situation and I do not see the IDoc output in the BD87.
It would be nice if you share the solution.
Thanks in advance

How do I execute IDOC for message type LOIPRO

How is it possible to execute IDOC using message type LOIPRO which I have configured with change pointers? Change pointers are using object ORDER.
I am looking to only generate IDOC for production order changes / updates that meets the criteria set by the change pointers. If something in the order changes, but that field is not being looked at by change pointers, I don't need IDOC to pick up that order.
I don't want to have to run RCCLTRAN or RCCLORD on a scheduled job. Only need to have activity if change pointers are activated. Am I going down the wrong road using LOIPRO ?

Hi Bob,
Could you please guide me through the process of creating/triggering a change pointer based LOIPRO? Your help much appreciated.
Tabraiz

How to create process variant for delete index in a process chain

Respected all
I am creating a process chain, but unable to create process variant for the delete index. kindly tell me the
step by step proceure for creating the variant for delete index. also if we use variant which is previously prepared then will it be safe? will it affect the other running process chian.
pls reply
thanks
abhay

Hi,
Please do not use an already created variant for index deletion. It might delete indices of some other cube.
You can follow the following steps -
1. Open the chain in Edit mode and click on "Process Types" button
2. On the Left hand side you will have various process types. Choose "Data Target Administration" and expand it.
3. Choose the first process "Delete Index" (it will be marked with a trash bin sign) and drag it to your chain
4. It will ask you create a variant. Press the create Button
5. In new window enter the Process Variant technical name and description
6. Then in new window choose Object Type = Cube through dropdown and Object name via browsing. After choosing the cube name click on "Transfer Selections"
7. Save and return to your chain
8. It will automatically generate a create index step also after delete index.
9. You need to break the link between create and delete step and insert infopackage in between to get the following steps - delete index --> load cube --> create index.
Please let me know if this is helpful..
Regards
nishant

How to mark PCI devices for pass through in host using Powercli?

PCi devices in host can be retrieved using Get-VMHost command . How do i mark the device for pass through in host?
Please help on how this can be done. Thanks in advance.

Hi,
I don't think supressing through Global Personalization will change the business logic. Within the Business Logic it checks for the mandatory field.
After the changes I guess you need to make the changes accordingly.
The below link might be of some help.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
Please correct if I am wrong.
Cheers-
Pramod

How to remove User IDs for deleted users from the Disk Quota list

Hello,
We have a computer lab setup with an Xserve managing 15 stations in the lab. Users are setup with networked home directories and quota's are setup on the drive containing the home directories to limit users' storage.
The user account and the quota limit are setup with Workgroup Manager. When a student has been gone for a while and we are sure they no longer need the account we delete their account within Workgroup Manager and move their Home folder to the trash.
When viewing disk usage in Server Admin (by selecting the volume and clicking the Quatas tab) user ids for deleted users are listed and it still shows the disk usage and quota settings for the user.
How can I remove theses user ids from the quota list?
Any help would be appreciated.
Brian

I would restore User's file structre back to normal just by copying from standby user?
Did you mean copy files to a new user profile? If so, hope this link can be helpful for you
http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
For the unknown user, as you said, it's probably a user account from second OS or
action. If you're annoying about this unknown user, then you can remove all occurrences of granted rights to the specified SID with this command icals [/remove[:g|:d]] <Sid>[...]] [/t] [/c] [/l] [/q]
http://technet.microsoft.com/en-us/library/cc753525.aspx
Yolanda Zhu
TechNet Community Support

How to flag a material for deletion?

Hi All,
Any FM or transaction that I can use to flag a material for deletion?
Thanks in advance.

FYI
BAPI_MATERIAL_DELETE Flag Material for Deletion
MALU Update Program: Set Deletion Flag Mat.
MATERIAL_UPDATE_LVORM Update changed deletion flags in material mas
 DPRL Change Material When Profile Deleted
MBAD Delete Material Documents
MM06 Flag Material for Deletion
MM16 Schedule Material for Deletion
MM70 Sel. Materials Flagged for Deletion
MMDE Delete All Materials
PPRL Change Material When Profile Deleted
Tip: You can see the Package =M* to find out all MM related object in SE37,se93 as well as in SE38.
Hope thisll give you idea!!
Pl... award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

How to create outbound IDOC for Accounting document type RV

Hello All,
We have a requirement to create a downpayment request for a customer. We have copied the FAZ billing type and created a ZFAZ. For this the accounting document type generated is RV. This RV is a statistical document and does not contain any debits and credit entries. It is just to inform the customer to pay. We have to generate an IDOC for the same. I have configured FIDCC1 standard FI message type for this in ALE. But it does not seem to work.
Does anyone have any inputs on this ? May be RV does not use the message type FIDCC1 ? Anything in relation to RV or downpaymnts, please let me know..
Appreciate your responses.
Thanks
SH.

Hello Alpesh,
I tried adding breakpoints to the following userexits and many other places where they occur..but while creating billing doc FAZ nor while generating accounting document RV they were triggered.
I have created a distribution model and created the partner profile with outbound for basic type INVOIC02 for message type INVOIC . What do you say?
Just a note that this is an outbound process and i cannot use process codes.
- EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
- EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
Thanks
Smitha
Edited by: Smitha H on Jul 25, 2008 7:56 AM

How to trigger FIDCCP02 idoc for outbound vendor invoices?

Hi
1. How can i trigger the idoc FIDCCP02 for outbound processing? I am trying to use this idoc to send the vendor invoice data to another system.
2. How do i send existing data from sap to another system thru idocs?
pls give me the steps.
Regards
Sujai

Hi Sujai,
First you have to fill the your data into a table which is like the structure of EDIDD.Here you have to fill the all segmetns in the sequence which defined in the idoc type only other wise you will get error 26.
Then pass the control record data in the structure like EDIDC here you have to fill the sender,receiver,partner profile,idoc type message type like stuff.
Then pass these table and structure to the function module MASTER_IDOC_DISTRIBUTE.
Then idoc will created by above funciton module.
If you want pass data in xml format then you have to create xml port in we21 and pass this port name in the EDIDC structure.
Thanks,
radha.

How to find the IDOC for the archived message in integration engine

Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

How can we implement workflow for Deleted content

Hi Experts,
whenever we delete a content , It never went into Workflow.
I want when user delete any content, It should go into workflow. When approver approves it, only then content item should actually deleted. If approver rejects it, content item should not get deleted.
Is there any way to achieve this ??
thanks

Several things jump out about how you may be using delete.
First is that delete rights are set up as separate and distinct from Read and Write (contribute) rights. This is true even for content authors.
There is good reasoning behind this. Basically, because deleting items has special and often regulated meaning, giving users delete permission should be a very intentional action and never a default.
Second, using the "expiry" functionality is a much better and safer option in most cases. Expiring a piece of content removes it from visibility to all except the sysadmin. Expiring content effectively "soft deletes" the item from the user experience while allowing the administrators to still recover the item if necessary. Another advantage of expiring content rather than deleting it is that as the content approaches the expiry date or as an expiry action is triggered, this can automatically trigger actions like a workflow review, email notification, BPEL service call etc. This gives you advance warning as well as the ability to intercept, review, and sign off on the action. You can also run batch jobs to archive and store or archive / delete "expired" items if you determine that you still need to do this.
Finally, if you have considered the above options and still determine that you need to capture "delete requests" then the best option is to write a custom component that intercepts the delete service request and triggers a workflow, notification, expiry or other action.
Remember that when you delete an item you must consider whether or not you are deleting just the latest released revision or all revisions or some selection of revisions. OOTB, UCM allows those with delete permissions to delete revisions one at a time. The repository manager applets provide admins with a bit more batching flexibility.
Hope that helps,
Warmly,
Billy Cripe
Fishbowl Solutions

How to mark an IDOC for deletion?

Similar Messages

Maybe you are looking for