How to meet customer's demand in the query?

There are a lot of record in DSO, for each plant the customer wants to display the latest record.
e.g
Plant Date amount
A1 2007/08/09 30
A1 2007/12/05 50
A1 2007/12/28 30
in the query A1 2007/12/28 30 will be displayed.
PS: Remodellierung and new DSO take into no consideration. The customer wants it only in the Query
Thanks

You might consider to use virtual KF. It is useful in cases when you need to report new informations query but for some reasons remodeling of infoproviders in not an option. Virtual KF is is populated via customer exit/BADI within query runtime. See following SDN how to:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true

Similar Messages

How to use custome tag lib in the JSP page?

How to use custome tag lib in the JSP page?...with JDeveloper

http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtTopicFile.working_with_jsp_pages%7Cjsp_ptagsregistering~html/

How to write customer exit in my BI query to get (current fiscal quarter) and (current fiscal quarter - 1 ) without user input

Hi all,
I need your help how to write customer exit in my BI query to get (current fiscal quarter) and (current fiscal quarter - 1 ) without user input.
in my query info object is 0CALQUARTER and variable is ZFIS_QTR.
in 0CALQUARTER fiscal quarter stored in 201301,201302,201303,201304 and 201401 format, for current fiscal quarter 201401 and (current fiscal quarter - 1 ) would be 201304.
please replay ASAP to deliver the report to client.
thanks in advance.
-- Rakesh Nagpure

I am Getting the same error for both the codes that i have written...
Do i Need to write sth else in the code...
Code:
WHEN 'ZVLIVELEASES'.
IF I_STEP = 2.
        L_DATE = SY-DATUM.
        SELECT * FROM "DSO_ACTIVE_TABLE"
            INTO TABLE ITAB_LL where "EXPIRY_DATE" > L_DATE.
        LOOP AT ITAB_LL INTO WA_LL.
        CLEAR l_s_range.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        l_s_range-low = WA_LL-"EXPIRY_DATE".
       APPEND L_S_RANGE TO E_T_RANGE.
        ENDLOOP.
   ENDIF.
Error: Error for variable in customer enhancement ZLIVELEASES

How can i pass a parameter to the query to filter the result of this lookup

Hello,
i'm developping a web application with JDeveloper 10.1.2 and JHeadStart.
i realy need to know how can i filter the lookup (LOV) query result.
in other word, when i click on the lookup, it show all the row that exist in may data base table.
what i want is how can i pass a parameter to the query to filter the result of this lookup ?
Thank you

Hi,
have a look if this helps
http://oracle.com/technology/products/jdev/tips/fnimphius/restrictlovlist/restrictlov.html
Frank

How can i register column with in the query

hi all
how can i register column with in the query?

Thanks.
In my business one, the column width was registed.
But I don't know how can I do it.
So I try to save the query again after change column width.
Then the query was opend with changed column width.
Is it right function?
Is there any way to register the column width?
It's very troublesome to change column width every time.
seiichi

How to display language key (0LANGU) in the query for BW report

Hi,
Can someone tell me how to display language key (0LANGU) in the query? I want to display which language (English or French) is used for material description in BW report. Thx.

hi,
check if the infoobject is kept as lang dependent or not for material text, else you need to create a masterdata attribute with text and lang keys and do corresponding mapping, so then it can be displayed in your report
regards
laksh

How to access custom attribute value on the timecard at runtime

I have created 2 attributes; Project and Task.
Once a employee selects the Project from the Projects custom LOV I want the Task LOV to display only the tasks related to that particular project.
How to access the PROJECT_ID during runtime which the user selects from Projects LOV?

Hi
I have added the below text in the ldt file.
But its not working? Any suggestions?
What may be going wrong?
# CSR Project List
BEGIN HXC_LAYOUT_COMPONENTS "XXCSR1 Payroll Timecard Layout - Project"
OWNER = "CUSTOM"
COMPONENT_VALUE = "XXCSRPROJECT"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "XXCSR_HXC_TIMECARD_PROJECT"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "211"
COMPONENT_DEFINITION = "CHOICE_LIST"
RENDER_TYPE = "WEB"
PARENT_COMPONENT =
"XXCSR1 Payroll Timecard Layout - Day Scope Building blocks for worker timecard matrix"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "XXCSR1 Payroll Timecard Layout - Project"
OWNER = "CUSTOM"
QUALIFIER_ATTRIBUTE_CATEGORY = "CHOICE_LIST"
QUALIFIER_ATTRIBUTE1 = "Custom1VO"
QUALIFIER_ATTRIBUTE4 = "N"
QUALIFIER_ATTRIBUTE5 = "15"
QUALIFIER_ATTRIBUTE6 =
"XxcsrProjectId|Projects List|RESULT|N"
QUALIFIER_ATTRIBUTE10 =
"oracle.apps.hxc.selfservice.timecard.server.Custom1VO"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "Projects List"
QUALIFIER_ATTRIBUTE27 = "Attribute1"
QUALIFIER_ATTRIBUTE28 = "Projects List"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
# CSR Project List
# CSR Task List
BEGIN HXC_LAYOUT_COMPONENTS "XXCSR1 Payroll Timecard Layout - Task"
OWNER = "CUSTOM"
COMPONENT_VALUE = "XXCSRTASK"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "XXCSR_HXC_TIMECARD_TASK"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "212"
COMPONENT_DEFINITION = "CHOICE_LIST"
RENDER_TYPE = "WEB"
PARENT_COMPONENT =
"XXCSR1 Payroll Timecard Layout - Day Scope Building blocks for worker timecard matrix"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "XXCSR1 Payroll Timecard Layout - Task"
OWNER = "CUSTOM"
QUALIFIER_ATTRIBUTE_CATEGORY = "CHOICE_LIST"
QUALIFIER_ATTRIBUTE1 = "Custom2VO"
QUALIFIER_ATTRIBUTE4 = "N"
QUALIFIER_ATTRIBUTE5 = "15"
QUALIFIER_ATTRIBUTE10 =
"oracle.apps.hxc.selfservice.timecard.server.Custom2VO"
QUALIFIER_ATTRIBUTE14 =
"HxcCuiTaskProjectId|PROJECT|Y"
QUALIFIER_ATTRIBUTE15 =
"pro_id = ::XxcsrProjectId"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "Projects List"
QUALIFIER_ATTRIBUTE27 = "Attribute2"
QUALIFIER_ATTRIBUTE28 = "Task List"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
# CSR Task List
###########################################################

How to use customer exit variable in the report

Dear All,
i want to use a standard customer exit variable in the report properties.
In the Bex Query Designer right hand bottom you will find two buttons "Properties" and "Task". Click on task you will get different option. Choose properties from there and then select "variable sequence tab".
I need to add a standard variable there. How can i achieve it?
Appreciate your early help.

You need to add variable to corresponding charctertic then you can get that varaible for sorting the sequence....
If 0CUST is the varaible then you need to assign it 0CUSTOMER then 0CUST will be available for the sequence.
Edited by: shanthi bhaskar on Apr 2, 2009 5:41 PM

How to create custom FYI Notification in the iRecruitment Notification Approvals Transaction type

Dear All,
Does anyone know how to create a custom FYI Notification using the Notification Apporval Transaction type??
my requirement is when the Candidate complete filling his personal information and upload required document, a notification should be sent to the recruiter informing that all documents have been uploaded.
Can anyone tell me how to do that?
Thanks
Regards

Hi,
Please see this thread.
Want to send public message to all oracle apps users while instance up
Re: Want to send public message to all oracle apps users while instance up
Also, see these docs/links.
Managing Downtime in Restricted Mode from OAM [ID 364236.1]
R12 Enabling Applications Maintenance Mode and Preventing User Access [ID 557964.1]
Downtime and Apache Restricted Mode in Release 12
http://blogs.oracle.com/stevenChan/2008/03/downtime_and_apache_restricted_1.html
Thanks,
Hussein

Any one know how to use "custom" option present under the data access tab in XLS file format of Data Services

Hi Experts,
Any one know how to use or what is the purpose of "custom" option present under the data access tab in Excel workbook file format of Data Services
Thanks in Advance,
Rajesh.

Rajesh, what is the Custom Protocol you are trying to use? It should be something like PSFTP, etc.,
Cheers
Ganesh Sampath

How to display custom error message if the Required field is not entered?

Hi,
I have made one input field as required field in a view.
I want to display one custom error message ,if the required input field is not entered.
Please help me regarding this.
Thanks,
Deepika

hi deepika....
First go to message pool under webdynpro components.
Create a new message there..of type error.
Enter your text.
Now to avoid null pointer exception , in wdDoInit(), initialise the value
wdContext.currentDateTimeElement().setDate("");
now create an action for submission of data. If field is empty, then within the button write:
msg = wdComponentAPI.getComponent().getMessageManager();
if(wdContext.currentDateTimeElement().getDate().equals(""))
msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true) ;
between begin others put:
regards,
pinki
IWDMessageManager msg = null;

How to create custom BOL object for dynamic query in CRM 7.0

Hi,
Could anyone please explain me with steps that how to create the custom BOL object for dynamic query in CRM 7.0, I did it in previous version but its throwing exception when i try to create the object of my dynamic query class. I just defined the entry of my in crmv_obj_btil to create the dynamic query BOL object. do i need to do any other thing also to make it work?
Regards,
Kamesh Bathla
Edited by: Kamesh Bathla on Jul 6, 2009 5:12 PM

Hi Justin,
First of thanks for your reply, and coming to my requirement, I need to report the list of items which are there in the dynamic select statement what am getting from the DB. The select statement number of columns may vary in my example for different countries the select item columns count is different. For US its '15', for UK it may be 10 ...like so, and some of the column value might be a combination or calculation part of other table columns (The select query contains more than one table in the from clause).
In order to execute the dynamic select statement and return the result i choose to write a function which will parse the cursor for dynamic query and then iterate the values and construct a Type Object and append it to the pipe row.
Am relatively very new for these sort of things, welcome in case of any suggestions to make it simple (Instead of the function what i thought to work with) also a sample narrating the new procedure will be appreciated.
Thanks in Advance,
mallikj2.

How to include non database item in the query

Hi
I have a Master-Detail form. where in the detail block one of the field is text item 'X' attached the list of values(Y). Master block includes non database items which is based in the decoding result of the database items for example:
Gender(Male, Female)>> non database item
Gender_id(M,F)>>database item
the form is created based on the template.fmb form for apps. When I run the form in the query mode, i can query about any database item while including query about others non database item does not affect.
how to can i modify it so this could be handled??
I know that one way to avoid this issue is to create a view with all my desired field.
but there should be away to override the build in query used by oracle apps...
any one has a link, source, document... etc that help on this??
any idea how to do it without creating a view??
thnx alot

Hi HST,
You can code the handling in POST-Query of the corresponding block to retrive the corresponding data depending on the Queried data.
Regards,
Kiran

How can i reuse a structure in the query designer in 3.5

Hi all,
we are using the version BW 3.5, now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

HI Richard,
Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
1) Structures
2) Keyfigures
3) Dimensions
then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
1) With Key figures
2) Without Key Figures
If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
Regards
ReddY A

How to compare two amount colomns in the query ?

Hi,
I need to compare two amount colomns in the query and based on that i need to change the color of the colomn
Is it possible by using exceptions.if yes please tell me how to do it.
Regards
Ansari

Hi,
you can give this a try:
1) Create a formula keyfigure (Keyfigure A> Keyfigure B)* 1+(Keyfigure A< Keyfigure B)* 0, so here you get value as either 0 or 1,
2) Hide this Formula Keygiure for display in the report, and create a exception on this Formula keyfigure for its value 0 or 1 with the desired colors.
3) While defining the exception on the 3rd tab we get the option to specify the Columns for implication of this exception, their you can specify the desired 2 Keyfigures to be highlighted with the colors.
Hope this helps ..
Regards,
Umesh.

How to meet customer's demand in the query?

Similar Messages

Maybe you are looking for