How to Modify ME2L (Purchase Orders by Vendor) ?
Hi I would like to modify (adding a new Select-Parameter) to the selection-screen of transaction ME2L.
Any Experience witdh that ?
Thanks a lot !
Hi David,
There are numerous Enhancement Points And Implicit Enhancement Points in the Report code RM06EL00 (Program for Tcode ME2L).
See if any of these helps in meeting your requirement.
Create implementations of the requisite Enhancement Points and Implicit Enhancement Points and add your requisite code.
Otherwise you can create a copy of the program RM06EL00 and make necessary changes to the custom code. Then attach the custom code to a tcode.
Hope this helps.
Regards,
Abhisek.
Similar Messages
-
How to print the modified old Purchase Order
Dear Friends,
What is the process of printing the modified old Purchase Order.
With Regards,
Siva kumarDear,
Please check the link with screenshots.
http://www.finance.utoronto.ca/fast/qrg/purch/po/print.htm
Regards,
Syed Hussain. -
Report to display open purchase order by vendors
Hi all,
Please let me know the report that displays the open purchase orders by vendors
Thanks in advance
sunilDear Sunil,
Added to erlier reply, you can get by ME2L/ME2M...., inselection parameters select WE101. Which gives all the POS that are open. You can restrict y giving the vendor number.
If your proble is resolved, please close the issue
With Regards,
krishna -
Hi
We need to modify Standard Purchase Order Stylesheet (po_standard_xslfo.xsl) . Current stylesheet generating PO like the following.
<FOR-EACH>
ITEM_NUM
ITEM_DESCRIPTION
<FOR-EACH>
SHIP_TO_ADDRESS_LINE1 NEED_BY_DATE QUANTITY
</FOR-EACH>
</FOR-EACH>
Based on this, we are getting the output like this:
Item Num 1
Itme Description 1
Ship To: Needed: Quntity
1234. A1 Avenue JUL 200
SomeCity, CA 90706
1234. A1 Avenue AUG 200
SomeCity, CA 90706
4567 B1 Avenue JUL 100
City2 , CA
Itme Description 2
Ship To: Needed: Quntity
5689. c1 Avenue JUL 200
SomeCity, CA 90706
Our requirement is like this:
Item Num 1
Itme Description 1
Ship To: 1234. A1 Avenue, SomeCity, CA 90706
Month: JUL AUG SEP
Quantity: 200 200 100
Ship To: VVV4567 B1 Avenue , SomeCity, CA 90706
Month: JUL AUG SEP
Quantity: 100 200 100
So we need to add ship_to group (ITEM/SHIP_TO) .
How can we use group by item, ship_to..
<fo:block> <xsl:value-of select="ITEM_NUM"/> </fo:block>
<fo:block> <xsl:value-of select="ITEM_DESCRIPTION"/> </fo:block>
<xsl:for-each select="/PO_DATA/LINES/LINES_ROW/LINE_LOCATIONS/LINE_LOCATIONS_ROW">
<fo:block> <xsl:value-of select="SHIP_TO_ADDRESS_LINE1"/> </fo:block>
<fo:block> <xsl:value-of select="substring(NEED_BY_DATE,4,3)"/> </fo:block>
<fo:block> <xsl:value-of select="QUANTITY"/> </fo:block>
</xsl:for-each>
</xsl:for-each>
In the above code I need split the data by ITEM_NUM/ SHIP_TO_ADDRESS_LINE1.
I am new to xsl-fo. I tried different ways,but ship_to_address_line1 is generating wiith each quanty and need_by_date.
Please guide me.
Thank you
Raju
Edited by: subbaraju on May 7, 2009 2:36 PMHi Chandra
Thank you very much for your suggestion.
I tried that way, I created some sample xml file, I created sample rtf file and I generated xsl-fo file. I copied the part of code into my PO_STANDARD_PO.XSL. I am getting some error.
I noticed PO_STANDARD_PO.XSL is xsl version 1.0 and the generated sample data is with xsl version 2.0.
The generated code is using “for-each_group”, “sum()”, “current-group()” etc. Is these functions will work in xslt 1? Or do we need to code different way?
We are in Oracle APPS 12.0.4.
Thank you
Raju
Edited by: subbaraju on May 26, 2009 11:56 AM -
How can I send purchase order through SAP mail ?
How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?
just do it as <b>Anji reddy</b> said to you ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the the belwo program is for sending <b>the Spool Request data as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish -
How to create customer purchase order
Hi,
How to create customer purchase order?
Thanks & Regards,
Naren.Dear Naren,
As you told we create a purchase order to the vendor by ME21N. This is done by the MM consultants. Now to create a purchase for the customer to say is nothing but to create a Sales Order based on the Purchase Order details of the custome by T.Code VA01.
Please get back if need any further explanation.
Thanks & Regards
Sadhu Kishore -
How to get the Purchase order Qty in the object dependency
Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
SriniHi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ). -
How to view the purchase order output
Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A -
How to Close Service Purchase Orders
Dear All,
Please guide me how to close Service Purchase order if the part services are pending and Net value is not completed or no service entry done.
But still we need to close the purchase order.
Is there any manual provision in Service Entry Sheet or Purchase order ?
Please help.
Shailesh PanchalHi,
Activate Delivery Complete Indicator on Service Purchase Orders through configuration.
SPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level-PT9F-Define Screen Layout at Document Level-Optional
Now check all the service purchase orders for which you want to close.
Hope this will help you.
BR,
Patil -
How to make collective purchase order from planorder generated from MRP
Hi Experts,
I have 2 queries are
1) Is there any option to create collective Purchase order or Purchase requisition from Plan order generated from MRP ?
for e.g one packaging material is use in different finish goods products when we run MRP on all finish goods its generates Plan order of FG and BOM. In packaging material it dependent of 3 to 4 FG and its generate 3 or 4 different Plan order.
It is possible to create collective PR or PO ?
2) Is there any possibility to convert Plan order onto Purchase order by vendor , material and delivery date ?
I have use ME59N and MD15 but its not useful for me.
Thanks
Farrukh khanDear farrukh,
when MRP run You should set mrp control parameter
Create Purchase requisitions :- 1
then after mrp run Purchase requisitions created.
and
we can change collective Purchase requisitions in to one Purchase order.
go to selection variant in ME21N,
then select Purchase requisitions and put all Purchase requisitions.
and adopt and create Purchase order.
but condition is it will create only same material and same vendor.
Jainashu -
How to find Specfic Purchase Order is being edited or not
Hi Friends,
How to find Specfic Purchase Order is being edited or not.
Thanks in Advance.
Murali Krishna KHi ,
When you are creating or editing a purchase order the table T160
has a field TRTYP which keeps a track or edit or create or display.
* Masked
A Display
B Edit
C Display from archive
E Single-item planning
H Add
V Change
X Initial transaction
S Standard parameter: normal mode
U Convert indiv. planned order
L Delete
P Planning file entry
K Copy reference
D Print
Please reward points if useful. -
How pop up form Purchase Order !
How pop up form Purchase Order and show last record
Basically you perform same steps as you would do manually in B1 app, that is
- Click Modules - Purchasing A/P - Purchase Order = .ActivateMenuItem("2305")
- Click Data - Last Data Record = .ActivateMenuItem("1291")
Pls, try searching this forum for more details, it's all there.
For example, Load standard SBO form from add-on might be useful.
HTH
Juha -
How to deal with purchase order purchased with sale order
Hi,
I know we can produce with sale order, and the finished products can be priced in their own sale order and line item even when the finished product master data is set 'S' in its price control field. But how to deal with purchase order purchased with sale order if its price control is 'S' and the purchased material can be priced differently with its own sale order?
thanks.Hi,
That is to say, we want to get these results:
1. material purchased must match its sale order and its item
2. the purchased material is valued by sale order and its item when it is put into the stock.
3. the purchased material is set "valued by standard price' in its material master data.
How to practice?
Thanks. -
How to find Purchase order by vendor code
Hi Gurus
Our user forget the purchase order no which was created by him, he has the document no eg 4600000485 and vendor 100414 but unable to trace it I try to find with ME2L no success ....
Generally the t code was cico
Any clue to know how to find the P.O please , I know the user code
regards
PizonHi
Goto table EKKO, enter Vendor Number (LIFNR). You will get a list of PO numbers (EBELN), as vendor number is not the primary key. From this list, you can figure out the PO # you want say probably using ERNAM (person who created).. The corresponding line item details can be fetched from EKPO.
THanks
Vijay
PLZ reward points if helpful -
Purchase Order to vendor through mail
Hi Experts,
Now I am creating Purchase Order .As per my configuration the pos will go to vendor only through mail and conformation for send user.
But my client wants send that mail like CC to some other departments (officials) at the same time.
Please advise me how I can send mail to other departments.
Thanks in advance,
Nagi ReddyThanks for your replay,
Now I am maintaining more than 1 mail id in vendor master. But email itu2019s going to one email id only.
Now i am maintaining 3 email ids. But system will send PO to only one mail id (which mail id is having standard number is activated.)
i am trying to maintain standard code for all mail ids. But system is accepting for only one mail.
Please advise me how can solve this problem
Thanks in advance,
chandhu
Maybe you are looking for
-
This problem has perplexed me for quite some time. I have been trying to find a solution to this for a while now and have had no luck. The problem I face is that I have trouble getting a cd from one band and all of the music from another band to sy
-
Ok, so I plug in my touch 3rd gen and I can't tell if it is really charging. It doesn't seem like it is. I can only see the charging icon sometimes, and then after the icon goes away, the ipod won't respond! I'm not sure what to do. Than I thought th
-
How to reverse Depreciation??
Dear Members, For an asset dep key is assigned wrongly. Depreciation has been posted for a period. Is there any possiblity to reverse depreciation for single asset ..if soo how to reverse it.?? regards, shashi kanth reddy
-
Variable speed transitions?
Hi, I want to set up a transition (cube spin in this case) where i can vary the speed of the transition similar to doing time remap but on the transition. I'd like it to get progressivley faster, like a tween in flash any ideas? thanks, andy g5 Mac
-
Assign authorization object to standard transaction (VA02)
I've success to create an authorization object and assigned to va02. I also use su24 to check indicator for my customize object. There are reported that it is Check. I think it is activated. Then i access va02, but it still can access, I suppose i no