How to make collective purchase order from planorder generated from MRP
Hi Experts,
I have 2 queries are
1) Is there any option to create collective Purchase order or Purchase requisition from Plan order generated from MRP ?
for e.g one packaging material is use in different finish goods products when we run MRP on all finish goods its generates Plan order of FG and BOM. In packaging material it dependent of 3 to 4 FG and its generate 3 or 4 different Plan order.
It is possible to create collective PR or PO ?
2) Is there any possibility to convert Plan order onto Purchase order by vendor , material and delivery date ?
I have use ME59N and MD15 but its not useful for me.
Thanks
Farrukh khan
Dear farrukh,
when MRP run You should set mrp control parameter
Create Purchase requisitions :- 1
then after mrp run Purchase requisitions created.
and
we can change collective Purchase requisitions in to one Purchase order.
go to selection variant in ME21N,
then select Purchase requisitions and put all Purchase requisitions.
and adopt and create Purchase order.
but condition is it will create only same material and same vendor.
Jainashu
Similar Messages
-
How to make Open Sales Orders consider unallocated stocks in MRP run
Dear Experts,
Maerial BOM MATERIAL TYPE STRATEGY GROUP PLANNING STRATEGY DESCRIPTION
Req-DM Req-CU
3. TF180TK fert 20 KE make-to-order
2. TH300TK halb 20 KE make-to-order
1. TA300TK roh 10 LSF KSL make-to-stock
As listed above material in line no.1 is required to produce 2 and
2 is required to produce 3.
I have open open sales orders for material TF180TK(fert).
What settings do I need to effect, to make the System consider Stocks & Open Purchase Orders for material TA300TK (roh) which are not allocated to these Sales Orders , when MRP run is carried out at plant level using MD01?
RegardsDear Bisolaaina,
I Think by mistake this duplicate thread might have been created so pls close it
Regards
Madhu -
In an extended classic scenario, how can we make few purchase orders to sta
Hi All,
In an extended classic scenario, how can we make few purchase orders to stay local (i.e. without copying it to the back end). The decision criteria to stay local is information other than product category, i.e. using pcard and the cart value.
Thanks
MuraliMurali,
As I said usually this integration is done using ALE - IDOCs. You can find the all the configuration do be done here.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
In this the filtering can be done at two levels.
1. Data Filtering
2. Segment Filtering
Data Filtering:
Data filtering can be done in dustribution model where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Look at BD64 where you can do the config for data filtering.
Regards,
Ravi
Note : Please mark the helpful answers -
Delay in automatic OBD creation after GRN in collective purchase order
Gurus,
1. For certain articles only, there is a delay in automatic outbound delivery creation once GRN is done for a collective purchase order. The stores raise individual POs to the DC and the DC raises a collective PO to the factory/ manufacturing unit in this case. The delay is in the creation of the OBDs to these individual stores. Please let me know what settings determine this and also maybe the name of the program that creates these deliveries.
2. Also for certain articles, when we run the t-code WF10 to create the collective purchase order, we get the "No documents found" message. Please assist.
Thanks!
SuhasHi,
When you say GRN is posted, I assume you've confirmed it's actually posted?
How big a delay? Is it just outputting the delivery, or is it calculating the distribution and creating it?
We found we had poor performance on Idoc processing (R/3 4.7) and this was due to merchandise distribution specific code, where by the memory wasn't being cleared during processing of large volumes of data. An OSS note exists for this issue and was relatively easy to apply. I'll try to find the number tomorrow.
On the issue you have on no documents found. Check the STO delivery creation date on shipping data, if the procurement period you have selected in WF10 doesn't include this date, it will be excluded.
We had this issues a lot with poor data setup. We now operate this in batch variant as FROM Today's date - 1 month TO today's date + 2 months.
Without more info it's difficult to advise, WF10 can be a tricky beast to use reliably.
Check out any other OSS notes, as we did apply a few to get working correctly.
Are you configured to use parallel processing in WF10? If so is server group configured correctly? Again another lesson learnt we had.
Hope some of that was of help.
Dave -
Different collective purchase order for same site/vendor combination
Gurus,
We are trying to create a collective purchase order (WF10) from the distribution center (site) to the manufacturing site (vendor).
When we generate the work list, for certain articles, separate CPO numbers are being generated. How can we ensure that all the articles are available in just one CPO instead of multiple CPOs? What settings do I need to look at? Please assist.
Thanks,
SuhasAll,
This has been resolved. In the purchasing info record, the Region (EINA-REGIO)was maintained differently for a few articles.
Thanks,
Suhas -
How to find Specfic Purchase Order is being edited or not
Hi Friends,
How to find Specfic Purchase Order is being edited or not.
Thanks in Advance.
Murali Krishna KHi ,
When you are creating or editing a purchase order the table T160
has a field TRTYP which keeps a track or edit or create or display.
* Masked
A Display
B Edit
C Display from archive
E Single-item planning
H Add
V Change
X Initial transaction
S Standard parameter: normal mode
U Convert indiv. planned order
L Delete
P Planning file entry
K Copy reference
D Print
Please reward points if useful. -
How pop up form Purchase Order !
How pop up form Purchase Order and show last record
Basically you perform same steps as you would do manually in B1 app, that is
- Click Modules - Purchasing A/P - Purchase Order = .ActivateMenuItem("2305")
- Click Data - Last Data Record = .ActivateMenuItem("1291")
Pls, try searching this forum for more details, it's all there.
For example, Load standard SBO form from add-on might be useful.
HTH
Juha -
Hi Folks,
I have a sales order in place where the delivery date for the article is say 31.12.2008.
In the Article Master
Pl deliv time =1 days
GR processing time = 1 days
While creating Collective Purchase order,
Procurement period is entered as 30.12.2008 to 31.12.2008
Schedule line interval 1 day
When I exceuted, system throws the following message;
No documents was selected,application log generated.
Application log shows "Incorrect scheduling call, start date was not transferred correctly".
Pls help me to solve the above issue.
ThanksDear Kumar,
For CPO:
Check Article Master RP parameters and selection of Articles at CPO
For Merchandise Distribution:
(a) We can use the merchandise distribution functions to control the flow of merchandise from the vendor to the recipient (store or Customer)
(b) If the recipient of the articles is known at the time of procurement. You use either an allocation table (push method) or a collective purchase order (pull method) to plan distribution.
(c) The merchandise is procured externally and flows through the distribution center. It can either be put away in the distribution center or moved through the distribution center using cross-docking or flow-through.
(d) In the push method, merchandise distribution is planned using an allocation table. The procurement documents (vendor orders) and issue documents (warehouse orders or deliveries) are then generated as follow-on documents for the allocation table.
Flow through: The complete delivery for a single recipient is picked from all received Articles. Afterwards the next recipient is processed
Cross-Docking: The received units are already pre-packed for a specific recipient. They are just moved through the distribution area.
You have to carry out following tasks for Merchandise Distribution configuration:
(a) RP Types
(b) Planning Calendar (if required)
(c) Site Profile for Merchandise Distribution
(d) Adjustment profile per processing method
(e) Distribution profile on Article in DC
Article Master Data level
(a) RP Parameters (mandatory)
(b) Forecast Parameters (if required)
(c) Distribution Profile (mandatory)
Bye and all the best,
Muralidhara -
How can I send purchase order through SAP mail ?
How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?
just do it as <b>Anji reddy</b> said to you ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the the belwo program is for sending <b>the Spool Request data as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish -
How we know the Purchase Orders List thru MRP or Manual
Hello Experts,
We have started making purchase orders thru purchase requistions which are generated thru MRP/APO. But at the same time some purchase orders are being made manually. Now we want to make list of those which are created thru PR and those which are made manually.
Kindly advise.
Rajeev GuptaDear Rajeev
What I am guessing is that through MRP you must be generating schedule lines as a automatic procurement & another part is manual PO which is not covered through MRP.Both these will have a different number range of document when it is saved or created .From document no. you can identify .
Please check this hint & come back .If useful reward points,
Vivek Maitra -
How to get the Purchase order Qty in the object dependency
Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
SriniHi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ). -
How to view the purchase order output
Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A -
How to Close Service Purchase Orders
Dear All,
Please guide me how to close Service Purchase order if the part services are pending and Net value is not completed or no service entry done.
But still we need to close the purchase order.
Is there any manual provision in Service Entry Sheet or Purchase order ?
Please help.
Shailesh PanchalHi,
Activate Delivery Complete Indicator on Service Purchase Orders through configuration.
SPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level-PT9F-Define Screen Layout at Document Level-Optional
Now check all the service purchase orders for which you want to close.
Hope this will help you.
BR,
Patil -
How to make compressor give me 1280x720 h.264 from my 1440 x 1080 sequenc
can someone please tell me how to make compressor give me 1280x720 h.264 from my 1440 x 1080 sequence, with compressor I load up my high defition h.264 but i cant see where i can chage the size, I can tab on the preset and change max bit rates and other stuff but not to make it 1280 x 720,
Thanks for the help,
DazIn Compressor 3's Settings window:
Apple > Apple Devices > H.264 for Apple TV
this is one of the presets that is supplied as standard and it is pre-configured for H.264 1280x720 output
if you're building your preset from scratch then you can set the output frame size in the Dimensions area of the Geometry pane -
HT4539 how to move my purchased movies and tv shows from apple tv to pc
how to move my purchased movies and tv shows from apple tv to pc or to nas drive because my apple tv storage is full
Welcome to the Apple Community.
Did you try restarting the router.
Are you trying to watch them from the internet or a library on a computer.
Maybe you are looking for
-
Over the past couple of weeks we have been working on a solution which uses the newly available adobe XPAAJ api's (XML/PDF Access API for Java) for Java. The client has a legacy requirement to where users are issued with a pdf form which they complet
-
Server 2008 R2 SP1, BitLocker to go, image restore, Unexpected results
On Svr 2008 R2 SP1, I wanted to test backup and image restore with a Bitlocker encrypted USB disk. Here's what I did: I turned on encryption on the USB disk, Chose password method and set it to auto-unlock on this computer. Ran a full system backup w
-
Stuck in recovery mode. Keep getting (-1) error when trying to update.
I have problems every single time I update my phone. This is getting ridiculous. Apple needs to step there god **** game up. My phones stuck in recovery mode and I use it for extremely important things. Any suggestions?
-
Benefits- Work Injury Compensation
Hi, currently I am working on Insurance Plan for Work Injury Comppensation that is only applicable for those warehouse workers. Under the coverage variant I have defined Outpatient Primary Care as well as Inpatient Care. For the paramter group: I def
-
In DEc '03 i bought a muvo2 .5gb and since i have had it it has not worked properly, i t keeps on freezing when in use and when loading music...i have spoken to creative many times and all they ever say is replce the firmware...this does abosolutly s