How to monitor proxy in ECC
Hello friends,
I would like to know which all places in ECC system i can check for my myxy in error or success.
Regards,
Vishal K
the message is something like
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SAPGlobal/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
Similar Messages
-
Hi friends how to monitor to proxy communications
1)how to monitor to proxy communications in outbound side
Hi Ganga,
Check this blog:
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy
and check this thread also,
Outbound xml file is not getting generated
May be it will help you.
Regards,
Vikas -
Hi
I have done a Proxy to File scenario. The file is not getting created in the target directory. I wana know what went wrong. Since this is a proxy scene and not a File to file, how do I start about this ?
What are the transactions that I need to use to monitor the Proxy from ECC side ?
RegardsHi
So I have to log in to the ECC Development server and check SXMB_MONI. I thought this transaction works only in XI.
How do I find out whether it has left ECC or not in SXMB_MONI ? Which field gives the necessary input ?
Regards -
Proxy Activation - ECC 6.0 to SAP PI system
Hi All,
Our envirnonment -
1) SAP ECC 6.0 ( R/3 system)
2) SAP PI ( R/3 system)
To establish communicate between SAP ECC 6.0 to SAP PI ( R/3 system using proxies )-
we have setup following steps on ECC 6.0 system-
1) Created a HTTP connection in the business system of type H.
Please let me know what is the path prefix we need to set.
2) Configuration Business system as local Integration Engine.
3) Connection between Business System and System Landscape Directory
Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
I have developed a sample interface to send data from SAP ECC --->PI --> File system ( Proxy to file interface)
When i run the report to call the proxy it is pushing the data on the integration engine of the ECC system.
How can i debug what is the problem is ? why the data is not getting pushed on PI system using proxy ?
How can i debug this ? Please let me know if i am missing any thing in proxy activation between ECC to PI system.
Regards,
KishoreHi ,
I have cross checked the activation steps.
I am able to create a interface proxy to File
SAP ECC R/3 system --- > SAP PI ---> File system
I have created a proxy on ECC R/3 system using SPROXY. when i trigger the proxy using a abap report the data is not getting pushed on to SAP PI system .
When i do a SXMB_MONI on ECC system it should call the integration server as out bound ... It is throwing a error message as mentioned below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Integration Server
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">ITEM_MISSING</SAP:Code>
<SAP:P1>Envelope</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please let me know how to proceed .
Cheers,
Nanda -
Need to create ABAP proxy in ECC 6.0
Hi All,
I need to create Abap proxy in ECC 6.0 .Tha actual senerio is iam getting data from XI in XML format and i need to validate and update the date in the ZEE table fields respectively.i need to Modularize the class and keep the validation part separate. we should do validation framework for custom Master Data objects which can be turned On and Off. This can be used as a common framework for all master data validations.can any one guide me how to create abap proxy from staring till end ...Thanks in advance ...
Regards,
SRIramHi,
I got these below steps from SDNforumonly ..i do not have the link however i have the steps:
1.check Delivered Languages service.sap.com/languages.
2.check note 42305
3.In transaction SMLT , Choose Classify Language (Language symbol or F5 )
4.Supplement this language with English or German (Recommended)
5.The language must be defined in the instance profiles so that you can log on in these languages. The relevant parameter is
zcsa/installed_languages.
6.Go to the language for which you want to install extra packages and choose or choose Language --> Import Package
7.in the next screen , enter the path for language packages.
8.start immediately or schedule it .Optionally you can use the target server to exceute this ( to avoid performance issues
,if you are importing in production timings, and you cna exculde this server from logon group )
9.if any problems in importing then analyze the log and restart the import .
10.After importing the languages, you must also import the language data in the Support Packages.Choose Language --->
Special Actions ---> Import Support Packages
11.Go to the language that you want to supplement and choose or Language ---> Supplement Language(this is client specific ,
so execute for each client in your system)
And also to the above if your system is running on non unicode you need to install the code pages (example AIX locale command) .
Thanks. -
How to transport proxy object abap part
Hi ,
I am working with one outbound proxy . The proxy was working fine in production ,now one requirement came in which we have to add one extra field to Proxy .field has been added in message type and proxy was generated in respective ABAP box
abap coding every thing was done and it worked fine in Dev . I transported the PI part ( DT,MT,MI and MM ) .
However I am not sure how to transport the ABAP proxy in ECC from dev to prod .
Can you kindly please tell me all steps I tried to search in SDN but getting confused in what object I have to transport and how from ECC .
Regards,
SaurabhHi Sarvesh ,
Thanks a lot for all your reply .
It partially worked as I created the transport with proxy object but not toatally as all my objects are not included in the transport .
when I am doublicking the My proxy interface and then going in used object TAB then I am able to see the structures .
Abap team wants to include these structure in the transport .
Actually the code has already been transported and it is throwing the dump value as it is unable to find the new field as the new strucutre is not transported .
Should I tell Abap team to manually make some random change in the str now and save them again so that when I re generate proxy then it will be added to transport.
Regards,
Saurabh -
Hi,
Please provide me any links or documents deatiling on "How does a proxy gets triggered in ECC using CL_PROXY_INBOUND_ADAPTER, CL_PROXY_INBOUND_AGENT etc".
Thanx
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Sep 27, 2011 2:09 PMHi Kalpana,
you don't need to regenerate all the objects individually. You can go to the Message Interface and only regenerate it. If Message Interface name has been changed, you will then create a new proxy, not regenerate the old one.
regards.
roberti -
How do I logon in ECC or R/3 from BI (RSA1)?
How do I logon in ECC or R/3 from BI (RSA1)? I already searched the forum; I did my home work before I post this thread.
I will assign points to valuable information. Thanks in advance!
York.Hi,
IF my assumption is correct, if your in the monitoring screen (loading some data,and would like to login to source sytem)
then in the monitor screen,go to environment>job overview>login to source sytem
please let me know your concern is answered or not
cheers,
Swapna.G -
How to monitor a specific transaction in Solution Manager ?
Hi all,
I have configured the Service Level Reporting and it works correctly.
But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
Have i to configure the Business Process Monitoring ?
Thanks.Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker -
How to monitor an application using JMX
Hi,
How can I monitor the portal application running on portal server by using MBeans (JMX)? For this I need to make a connection between my portal application and MBean class, How to monitor operations? How can I do that? If anybody has come across the same requirement pls explain me with the implementation details.Hello,
I have done that in a project (not Portal, but pure Java Application, should be no difference), working fine.
The steps are as follows:
- create MBean Server (e.g. MBeanServerFactory.createMBeanServer("test");)
- create your MBeans
- make them accessible to clients (register the MBeans in the server)
- query them from clients
see http://java.sun.com/developer/technicalArticles/J2SE/jmx.html
for very good explanation including sample source code.
CSY -
How to monitor OSD TS failure and get alert or report?
How to monitor OSD TS failure and get some alert or generate an report?
We have SCCM 2012 R2 CU1 with MDT 2013.
I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
(I thinking of "Task Sequence - Deployment Status" reports)
I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
We do have SCOM, SCSM, SCO.
Is there anyone that can point what way or what option I have?
/SaiTechSpecifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
Cheers
Damon -
How to configure proxy services in OSB for Rest based services?
how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick -
How to monitor disk space in BW
can some body help me out on the following issues.
1)How to monitor disk space in BW?
2)How can I delete Application logs in BW?When I research with DB02 transaction code in BW, I encountered following tables having lot of log , please some body can help me, how to delete the following log data?
ARFCSDATA ARFC Call Data (Callers)
BALDAT Application Log: Log data
BSRWBSTORE Storage for binary large objects (Excel) -
How many monitors can you use on a new imac with GEForce 780m?
My husband bought a new 27" iMac with the optional GEForce 780m with 4 gig of video ram. He wants to know how many monitors he can run simultaneously, and at what resolutions. He would obviously be using the Thunderbolt ports to do this. I thought this information should be easily found in the technical specs for either the iMac or the video card itself on the NVidia site, but it is not.
Catherine Gramze wrote:
Ok, rkaufman. Can he use two 4k monitors in addition to his iMac display? He wants to know what his options are in terms of number of monitors and the resolution. Yes, I know which monitor you buy will be the limiting factor for the actual display, but he has not yet purchased these additional monitors. If thunderbolt allows him to run 3840x2160, how many of them can he run at once at 32 bpp? How many if he chooses 2560x1600 instead?
To be honest I don't know how many Thunderbolt displays he can run, I would STRONGLY recommend contacting Apple to ask. You can ask the online store (phone number is in upper right of it's home page) or if you have an Apple Store in your area, making an appointment with a business specialist and asking that question. -
How to set proxy authentication using java properties at run time
Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
public static void main (String[] args) {
URL u;
InputStream is = null;
DataInputStream dis;
String s;
try {
u = new URL("http://www.yahoo.com.au/index.html");
is = u.openStream(); // throws an IOException
dis = new DataInputStream(new BufferedInputStream(is));
BufferedReader br = new BufferedReader(new InputStreamReader(dis));
String strLine;
//Read File Line By Line
while ((strLine = br.readLine()) != null) {
// Print the content on the console
System.out.println (strLine);
//Close the input stream
dis.close();
} catch (MalformedURLException mue) {
System.out.println("Ouch - a MalformedURLException happened.");
mue.printStackTrace();
System.exit(1);
} catch (IOException ioe) {
System.out.println("Oops- an IOException happened.");
ioe.printStackTrace();
System.exit(1);
} finally {
try {
is.close();
} catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
GeorgeHi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
public static void main (String[] args) {
URL u;
InputStream is = null;
DataInputStream dis;
String s;
try {
u = new URL("http://www.yahoo.com.au/index.html");
is = u.openStream(); // throws an IOException
dis = new DataInputStream(new BufferedInputStream(is));
BufferedReader br = new BufferedReader(new InputStreamReader(dis));
String strLine;
//Read File Line By Line
while ((strLine = br.readLine()) != null) {
// Print the content on the console
System.out.println (strLine);
//Close the input stream
dis.close();
} catch (MalformedURLException mue) {
System.out.println("Ouch - a MalformedURLException happened.");
mue.printStackTrace();
System.exit(1);
} catch (IOException ioe) {
System.out.println("Oops- an IOException happened.");
ioe.printStackTrace();
System.exit(1);
} finally {
try {
is.close();
} catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George
Maybe you are looking for
-
What can I do to get my photos back to full resolution and fix them?
I imported photos two nights ago and when it popped up "delete from ___ drive?" I clicked delete like normal. Then my mac took longer to save and such, then iPhoto quit unexpectedly. My photos were off the disk and now I couldn't find them in my mac.
-
I have CM2012 and SQL 2012 installed in a lab. SQL does have SRS installed and enabled, the SRS service is up and running. In CM2012 I'm trying to add the reporting service point role. I'm on the Reporting Services Point page and I click Verif
-
Bridge CS6 crashing after a "Select All" command.
Hello all- I'm running Lion 10.7.4 on a 2008 MacBook Pro Unibody w/ a 2.4GHz processor and 8GB of ram. I have an SSD as my boot drive, it also houses all of my applications. All of my data / app data is stored on another 2.5 HDD that's in my optical
-
Two temp tables in a Stored Procedure
Hi guys, Is it feasable to use two stored procedures and form joins between them within a single stored procedure. I am trying a workaround for cursors in SYBASE. Thanks, Developer
-
Appearing Duplicate column in ABAP QUERY output list.
Hi , I have created a report using SAP QUERY having issue on output display showing duplicate columns name Weight Unit (LIKP-GEWEI ) and rest of field area coming fine . Kindly help to solve the issue . Th