How to move frame-by-frame in QT7 Pro

I can't figure this out and it seems so simple (it must be because I could find nothing on a search). One of my movies will go frame-by-frame with the left and right arrows, but another movie jumps in .80 increments. How do I set up QT7 so that the keyboard arrows move the movie exactly one frame at a time? Thanks.

One of my movies will go frame-by-frame with the left and right arrows, but another movie jumps in .80 increments. How do I set up QT7 so that the keyboard arrows move the movie exactly one frame at a time?
Actually, both movies are probably incrementing at the frame level. However, in one case the time reference is counting frames and in the other it is displaying the actual time increment of the frame. Basically, there are three similar but different time displays:
1) #:##:##.## indicating H:MM:SS.TT the the fractional . (period) TT unit is in hundredths of a second and the size of the incremental difference depends of the frame rate of the movie. (E.g., a 29.97 fps movie has an increment of about .03(333)/frame. This is the most common formatting you will likely see for most home movies and conversions.
2) #:##:##:## indicating H:MM:SS:FF where : (colon) FF is the current frame is expressed as a whole number between 00 and the frame rate for the movie. This format is commonly seen when viewing Apple/iTunes Trailers which normally contains a dedicated timing track. However, this can be turned off using the QT Preference which is usually defaulted to allow the display timing track data if included in the file. Unfortunately, there is no way to force this form of display if no track is included in the movie file.
3) #:##:##;## indicating H:MM:SS;FF where ; (semi-colon) FF s the current frame is expressed as a whole number between 00 and the frame rate for the movie. This formating option is usually dependent on the plication application in use. For instance, if you play a non-trailer/non-timecodded file in QT 7 and in MPEG Streamclip, you will get a time reference display (type 1 above) but get the "semi-colon" frame reference display in the MPEG Streamclip player.
Hope this helps you to understand the different displays and how to tell them apart.

Similar Messages

How to Move System Object to QA and PRO Systems

Hi Friends,
I have one doubt in SSO. By using SSO I Connected to BI and BCS Systems in DEV System. Now all working fine. Now I want to Move those IViews to QA and PRO System.
By using EP DEV Portal I have Connected to BI and BCS DEV Systems By using SO(SystemObjcet)
We have BI and BCS different Systems Like DEV, QA and PRO Systems
Could you tell me what is the process.
I have some Questions:
1. Can I create SO(System Object), System Alias and user mapping in QA and PRO Systems. Is it required.
2. Can you tell me what is the process.. in Briefly.
Regards
Kumar

Hi Friends,
Thank you for the Repley
Transportation I know. Now we have to SO (System Object) in DEV to QA and PRO Systems.
In DEV My SO having BI and BCS DEV System Details(Like Application Host Name, Gateway, Logical System Name, etc)
Now Same SO have to Move QA and PRO. Here we will Provide QA and PRO BI and BCS Details (Like Application Host Name, Gateway, Logical System Name, etc)
Vijay Says Like that is it currect way.
I think most probe ally we can create SO (System Object) in QA and PRO Portal also along with BI and BCS (of QA and PRO) System details.
Is another way is there. Please let me know.
Regards
Kumar

How to move clip one frame at a time or nudge

Tried searching this, as I'm sure it's basic and in the owner's manual, but I can't find it:
I can't control how far I'm dragging something across the timeline. Can I grab and nudge rather than grab and drag? I'd like to be able to move a clip one frame over.
Thanks.

If there's nothing in the way you can use the [ and ] keys or comma and period. Shift-bracket will move five frames.

How to move grouped text frames as a group?

I have a threaded text frame with two text frames total in the thread. I am trying to move only the second half of the threaded text frame from the second-to-last page to the last page of my document. I have been able to successfully do this using this code:
var myDocument = app.activeDocument;
var myEndFrame = myDocument.pages[myDocument.pages.length-2].textFrames[1].endTextFrame;
myEndFrame.move(myDocument.pages[myDocument.pages.length-1]);
However, this code does not work when the second half of my threaded text frame has another text box grouped inside of it (such as a pull quote). In that case, the script will only move the threaded text frame part and not the other text box grouped with it. I need the two text boxes to remain grouped, and I would like to move the entire group together to the last page of my document. I have tried everything I can think of to get this to work and have been unsuccessful. (For example, I tried to get my code to move the entire group, but I can't get it to recognize the grouped text boxes as a group.) It could be that I'm missing something obvious. Any help would be greatly appreciated.

Hi,
Suggest to check myEndFrame.parent before move.
If its constructor.name == "Group" redefine myEndFrame. I mean:
myEndFrame = myDocument.pages[-2].textFrames[1].endTextFrame;
if (myEndFrame.parent.constructor.name == "Group") myEndFrame = myEndFrame.parent;
myEndFrame.move(myDocument.pages[-1);
Jarek

How keep / move libraries between MacPro an MacBook Pro ?

I'm running instances of Aperture on both my Macbook Pro and my MacPro. I need to be able to "migrate" (or move) pictures between the machines, so that the desktop machine is the permenant home, and the Macbook keeps just recent stuff.
Is there a good way to move the Aperture library, or specific projects / folders from one machine to another ? Or, do I have do an export > import ?
Thanks.

Since you can create libraries at will, you can just rename the library on the mbp, copy it to the macpro, and open it from there (you can put it where you want it, make sure aperture is not running, then double click it to automatically set Aperture's prefs to that library, or you can just go to aperture's prefs and choose that library file, quit, and relaunch aperture).
Then for new stuff brought in on the mbp, you can export the project(s) and import it on your macpro as needed, deleting projects from the mbp as you wish (and deleting the stand-alone exported project on your macpro after it's imported so as not to waste space).
Mark

How to move some xml element and its content to a new frame

Hi All,
How to move some xml element and its content to a new frame.

Hi Chinnadk,
Sorry my code its comment some lines. Now only I check the forum thread, you just try one more time.
#target InDesign;
#include "/Program Files (x86)/Adobe/Adobe InDesign CS5.5/Scripts/XML Rules/glue code.jsx"
var myDoc = app.activeDocument;
//____________________ XML RULE SET
var myRuleSet = new Array (new margintag);
with(myDoc){
    var elements = xmlElements;
    __processRuleSet(elements.item(0), myRuleSet);
function margintag(){
    this.name = "margintag";
    //this.xpath = "//margintag[@type='mn2']";
    this.xpath = "//margintag";
    this.apply = function(myElement, myRuleProcessor){
        with(myElement){
            app.select(myElement);
            try{
                var myPrePara = app.selection[0].paragraphs[-1].parentTextFrames[0].paragraphs.previousItem(app.selection[0].paragraphs[-1]);
                if(myPrePara.characters[-1].contents=="\r"){
                    myPrePara.characters[-1].remove();
                var myTextframe = myElement.placeIntoInlineFrame(["7p9","6p"]);
                myTextframe.appliedObjectStyle= myDoc.objectStyles.item("MN1");
                myTextframe.fit(FitOptions.FRAME_TO_CONTENT);
                myTextframe.parentStory.paragraphs.everyItem().appliedParagraphStyle = app.activeDocument.paragraphStyles.itemByName("MN1");
                }catch(e){}
            app.selection = null;
        return true;
thx,
csm_phil

How can you get frame by frame control of the image on a movie buttom?

Working on IDVD 7.0.4, I'm trying to position still frames for each of my movie buttons. I read the help pdf and the slider worked an several images, but would not let me move frame by frame to select. When I found the image I wanted and selected it, as soon as I clicked away it reverted to a spot several frames later in the movie. Is there a way to move frame by frame in the still mode?

You may find this useful:
http://www.kenstone.net/fcphomepage/idvd_07stone.html

How to move titles around in the frame

How to move titles around in the frame

Double click on the text and a target button will appear on the baseline. Drag it with that.

How to add frame by frame control in MDIApp.java?

Hi,
In the SimplePlayerApplet.java sample code, I can play video frame by frame. I would like to modify MDIApp.java code to do the sample. Can anybody show me how to do it ?
Thanks

One of my movies will go frame-by-frame with the left and right arrows, but another movie jumps in .80 increments. How do I set up QT7 so that the keyboard arrows move the movie exactly one frame at a time?
Actually, both movies are probably incrementing at the frame level. However, in one case the time reference is counting frames and in the other it is displaying the actual time increment of the frame. Basically, there are three similar but different time displays:
1) #:##:##.## indicating H:MM:SS.TT the the fractional . (period) TT unit is in hundredths of a second and the size of the incremental difference depends of the frame rate of the movie. (E.g., a 29.97 fps movie has an increment of about .03(333)/frame. This is the most common formatting you will likely see for most home movies and conversions.
2) #:##:##:## indicating H:MM:SS:FF where : (colon) FF is the current frame is expressed as a whole number between 00 and the frame rate for the movie. This format is commonly seen when viewing Apple/iTunes Trailers which normally contains a dedicated timing track. However, this can be turned off using the QT Preference which is usually defaulted to allow the display timing track data if included in the file. Unfortunately, there is no way to force this form of display if no track is included in the movie file.
3) #:##:##;## indicating H:MM:SS;FF where ; (semi-colon) FF s the current frame is expressed as a whole number between 00 and the frame rate for the movie. This formating option is usually dependent on the plication application in use. For instance, if you play a non-trailer/non-timecodded file in QT 7 and in MPEG Streamclip, you will get a time reference display (type 1 above) but get the "semi-colon" frame reference display in the MPEG Streamclip player.
Hope this helps you to understand the different displays and how to tell them apart.

How do I replace the frame from the monitor on my GX740?

Problem: When I move the hinges on my laptop, sometimes the screen goes black until I move it into a different position, like the light disconnects (in fact, I'm pretty sure that's exactly what happens, as I can still see some stuff on the screen; it's just not lit). Having had LCD problems in the past with other machines, I figured "hey, probably just a loose connector, it happens; I should be able to just lock that strip back in place quite easily" (why they don't just make those connectors less prone to falling out - especially ones located in or near hinges - eludes me).
Sure. If I can just get inside the monitor frame. Which it seems I can't. I removed the screws, but when I tried to pull off the plastic frame, it cracked. The plastic frame around my monitor now has visible cracks in it.
So now I need to know not only how to remove this frame, but if possible, also where I can get a replacement for just that one part. I'll gladly take just an answer to the first part and live with the cracked frame as long as I can do something about the loose connector, but if there's an answer to the second part as well, that'd be really neat.
So...how do I remove the frame? Where can I get a new one now that I've ruined this one? Are there spares? Are they expensive?
I'd greatly appreciate a quick answer to the frame removal question, as I intend to bring this computer on a trip overseas and would like the LCD light to not have disconnected completely by the time I arrive, so I'd like to properly attach it before it's time to leave.
I've never had a machine that's so hard to open. This strikes me as quite user-unfriendly design, especially given how little it takes for an LCD connector disconnect, especially one located in the hinge area of a laptop.

GX720 disassembly guide
https://forum-en.msi.com/moderator/assembly-guides/ms-1722-disassemble-sop.pdf
GX700 disassembly guide
https://forum-en.msi.com/moderator/assembly-guides/assemble-1719.pdf
I'm not certain they are the same as the GX740 but I would I imagine they are very similar.
As far as finding another bezel, your best bet might be ebay.
http://www.storesavings.com/products--search-msi-bezel.html?aid=31738-4176544-53943996&utm_source=google&utm_medium=cpc&utm_campaign=watches&utm_content=&utm_term=+msi%20+bezel&utm_a=1s5&utm_t=b&utm_n=s&utm_c=34127592272&utm_p=&utm_m=&gclid=COiglouo670CFUoV7AodN1UA1g&qo=6143279&so=1 That might work as well, not sure though.

How do I go frame to frame after a few seconds?

Hello,
I'm new here so forgive any mistakes or lack of knowledge.
(Brief history: I have programmed in Pascal before, currently learning Java and Flash)
So my question is i want to be able to move from frame to frame after X amount of seconds. I have searched online for coding on how to do this with the action script and managed to get the first frame working. The problem occurs with my 5th frame as frame 1 goes to frame 5 in 5 seconds but when i want frame 5 to go to frame 10 in 10 seconds it decides not to work.
Below is the code i used in order to accomplish the first frame:
stop();
var myTimer:Timer = new Timer(5000, 1);
          myTimer.start();
    myTimer.addEventListener(TimerEvent.TIMER_COMPLETE, function(e:TimerEvent)
        play();
If there is a problem with the code or if there is an alternative way for better practice please do let me know.
My 5th frame code:
stop();
var myTimer2:Timer = new Timer(5000, 1);
myTimer2.start();
    myTimer2.addEventListener(TimerEvent.TIMER_COMPLETE, function(e:TimerEvent)
        play();
Thanks in advance. If anyone is struggling to understand my question, apologies because i am really bad when it comes to structuring sentences.

You should not have to create more than one timer for this. Also, you should not be building the event handler function into the listener, keep it as a separate function.
In frame 1 you could have...
     stop();
     var myTimer:Timer = new Timer(5000, 1);
     myTimer.start();
     myTimer.addEventListener(TimerEvent.TIMER_COMPLETE, moveOn);
     function moveOn(e:TimerEvent):void {
           play();
and all you would need in frame 5 would be....
     stop();
     myTimer.start();

How to edit videos frame-by-frame and export in H264?

I wish to edit some videos and then export them in H264 so I can use them on a website.
I have tried to edit with iMovie 08 but can only edit second-by-second. I want to edit frame-by-frame ie to the millisecond. And it appears that iMovie 08 does not export in H264.
I have looked at iMovie 11 which has a Precision Editor which would work to edit as I want but for that I would have to upgrade from Leopard to Snow Leopard which I don't want. It would export H264.
I also have QuickTime Player 7 Pro but that too seems to edit only by the second not by the frame; it does however seem to produce H264
How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
Thanks for any ideas

I want to edit frame-by-frame ie to the millisecond.
Am a bit confused by what you say. iMovie and QT 7 Pro are both "frame" level editors. However, some forms of editing are, by their very nature, applied over a range of frames which may be a part of your problem. In addition, since "normal" movies have frames which are spaced apart in the 16 to 42 ms range, your requirement to be able to edit to the nearest millisecond would seem unreasonable and would probably be unsupported for playback purposes without skipping 90+ percent of the frames on most platforms.
And it appears that iMovie 08 does not export in H264.
All of the "Share" and/or "Export" options (except Final Cut XML...) either default to H.264 or allow export to H.264 (or X264 if installed) video compression.
How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
Difficult to say since you have not given any indication as to what you mean by "editing" here. You could, for instance, edit normal movie clips in a normal manner and then use an application like the JES Deinterlacer to change the playback time reference to achieve an effective 1 millisecond/frame playback rate you seem to want to target even though your platform cannot play every frame during playback.

How do I fade one frame into another?

In Flash pro 4 how do I fade out of one keyframe and fade into the next one with a slow transition? thanks.

Try this set alpha to 0. Move ahead 20 frames or how fast or slow you want it.Change the alpha to 100%.Then create motion tween in the button symbol and place the movie clip in the over state.
Then it should fade as the movie plays.You can implement it the way you want it.
Hope this helps
Good Luck!

How to go back to frame 1 when the timeline reaches a certain frame?

I have a timeline that has some label frames at the very end of the timeline. During the timeline a user will hit a button on a frame and will jump to one of the label frames. On the label frame is another button that when clicked - returns the user to the previous frame. How do I make the movie return to frame 1 - without a button - but before it reaches the label frames? In other words, by simply reaching a certain frame in the movie, I want the timeline to go back to frame 1.
I am using Action Script 3 on a PC
Thank you.

Thanks from me as well. I'm trying to make an interactive house simulation game (basic) and hit this issue where the timeline needs to skip to the next segment as several options are available per room (listed one after the other in the timeline). Flash isn't particularly easy to use when it comes to this kind of thing. Is Flash Catalyst CS5 more suited to this?

Loading external movies in specific frames

Here's what I'd like to have my project do: By clicking on a
button in frame 5 I'd like to load a movie into an empty movie clip
in frame 20. I'v ewritten the script to create the empty movie clip
and also load the movie, but the movie loads into all frames of my
project. I'd ideally like to have the movie clip waiting for my
only in frame 20. Anyone know how to make this happen?
Thanks
Eric

you could not load it into an empty movie clip located on
frame 20 from frame 5, flash wouldn't know where to load it since
the movie clip hasn't shown up... you could load it in on frame 5
and give the movie clip a _visible = false; or set it's _x and _y
properties to be off the stage, then on frame 20 set it to _visible
= true; or move its _x and _y properties to be on the
stage..

How to move frame-by-frame in QT7 Pro

Similar Messages

Maybe you are looking for