How to MSS ISR script.

I have a small question in MSS ISR adobe interactive form. I am trying to make few UI elements readonly when the user clicks the review button. I am trying to figure out what script I need to write beneath these UI elements that'll make them readonly when the user clicks the review button on the page. By the way the button is not on the Interactive form, its on the webpage (EP).
Kind Regards

Hi Raja Sekhar,
I created a custom PCR form from the SAP standard form.
I wrote a FormCalc code in form:ready event as
xfa.host.messagebox($record.CONTROL_PARAM.ISR_MODE)
if($record.CONTROL_PARAM.ISR_MODE == "DISPLAY" |
$record.CONTROL_PARAM.ISR_FORM_VIEW =="ISR_APPROVE" )
then
this.access = "readOnly"
else
this.access = ""
endif
When I click the Review button, I'm getting a message box with the value CREATE. The controls are in edit mode in review page. But the other forms are working fine. Do you know what is the problem with this?
Thanks
Sundar

Similar Messages

Help in MSS ISR form UI elements.

I have a small question in MSS ISR adobe interactive form. I am trying to make few UI elements readonly when the user clicks the review button. I am trying to figure out what script I need to write beneath these UI elements that'll make them readonly when the user clicks the review button on the page. By the way the button is not on the Interactive form, its on the webpage (EP).
For this, do I require to maipulate the ISR badi QISR1 or just the scripting would do (javascript/formcalc).
Kind Regards

Any comments for this topic? I'm having the same issue.
Thanks,
CL

How to print the script in condensed mode

Hi to all,
Pls help me.
How to print the script in condensed mode and particular window only print in the condensed mode.

Hi,
Hi
It will remove the blank spaces in front of the variable
and if you use the extension NO-GAPS
It will remove all the blank spaces in the variable field.
DATA: ws_val1 type char12.
ws_val1 = ' 100 123'.
Condense ws_val1.
Write / ws_val1.
Condense ws_val1 no-gaps.
write / ws_val1.
It will give output as
100 123
100123
The CONDENSE statement deletes redundant spaces from a string:
CONDENSE c NO-GAPS.
This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
Please check this link for sample code.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
Regards,
Raj.

How to run a script on Oracle server from isqlplus

Hi I am trying to run a script on my workstation from Oracle server through isqlplus workarea. I entered following command and get the following error. i have enabled isqlplus URL by editing web.xml file already. Can please someone help how to run the script?
@http://myaixserver.com:5560/scripts/Databasestartupstages.sql;
SP2-0920: HTTP error 'page not found (505)' on attempt to open URL

So far, you haven't specified your rdbms version and isqlplus behaved differently on a 9iR1, 9iR2 from the one release on 10gR1/R2. on 9i it was a servlet based on a JServ servlet executor machine, meanwhile on 10g it is a J2EE compliant application deployed on an OC4J container, so configuration is different.
You may want to take a look at these references -->
* Starting iSQL*Plus from a URL
* Creating Reports using iSQL*Plus
~ Madrid

How to print the script before realasing?

how to print the script before realasing?

Do you want to see the output of your SAPscript??and print it?? before you release.
Then goto NACE tcode and configure your script.
Example :
Goto Transaction NACE --> Select Application V1(Sales) --> Click on Output Types --> Select the output type as BA00 (as generally BA00 is the output type associated with Sales Order ) --> Double click on the Processing Routines folder on the left and it will display the Form name and the corresponding driver programs name.
Goto tcode VA03, and display the output from menu and do your printing.
Close the thread once your question is answered.
Regards,
SaiRam

How to get the script of a table or view in SQL Developer?

Dear friends/expert,
Could you tell me how to get the script for a view or a table easily in SQL Developer like pressing F4 in TOAD?
I found that I can press SHIFT+F4 for a view in SQL Developer and get the script of the view in Details Tab. But how to move the script to SQL worksheet to edit? It is very easy to do in TOAD.
And I didn't find a way to get the script for a table till now. Is there any way to do that?
Thanks in advance.
Best regards,
Ning

1. Although the team might put a lot of effort in keeping track on the forum, a lot of posts still go by without answer.
2. If you have an enhancement request, log it at the announced SQL Developer Exchange, so others can vote to add weight on the issue. Be clear and detailed in the explanation.
3. Given the structure of the application, I guess it won't be easy (maybe impossible) to add the functionality you are asking. Do you have a suggestion on how to access the info?
4. If your request gets accepted, still another year or two may go by until the functionality gets added. For sure you'll be better off writing a user defined extension or report (querying DBMS_METADATA.GET_DDL).
Hope that helps,
K.
Edited by: -K- on 12/01/2009 09:37

How to Run Indesign Script in a file from plugin code in CS4?

Hi, I have the code to execute the InDesign script stored in external file for InDesign CS3. InterfacePtr<IScriptManager> scriptManager(Utils<IScriptUtils>()->QueryScriptManager(kJavaScriptMgrBoss)); InterfacePtr<IScriptRunner> scriptRunner(scriptManager, UseDefaultIID()); IDFile scriptFile(scriptFilePath); if (scriptRunner->CanHandleFile(scriptFile)) { ScriptData returnValue; PMString errorString; ErrorCode error = scriptRunner->RunFile(scriptFile); ASSERT(error == kSuccess); } But the RunFile() method is cs4 expects an additional argument of the type RunScriptParams. Someone please show me with a code snippet on how to excute a script file in CS4??

Dear Ian
Here I'm used the below coding in CS3, Its working fine....
//In CS3 Coding
PMString jsFullPath("c:\\windows\\sample.jsx"); // a path to my java script file
do
const
IDFile outFile(jsFullPath);InterfacePtr<IScriptManager> scriptManager(Utils<IScriptUtils>()->QueryScriptManager(kJavaScriptMgrBoss));
ASSERT( scriptManager ) ;
InterfacePtr<IScriptRunner> scriptRunner(scriptManager,UseDefaultIID());
ASSERT( scriptRunner ) ;
if(scriptManager){
InterfacePtr<IScriptRunner>scriptRunner(scriptManager,UseDefaultIID());
RunScriptParams params(scriptRunner);
ErrorCode err = scriptRunner->RunFile(outFile, kTrue, kFalse);
while(kFalse);
But the same time I used this coding in CS4, Its not woking
//In CS4 Coding
PMString jsFullPath("c:\\windows\\MacID\\BIN\\sample.jsx"); // a path to my java script file
do
const
IDFile outFile(jsFullPath);InterfacePtr<IScriptManager> scriptManager(Utils<IScriptUtils>()->QueryScriptManager(kJavaScriptMgrBoss));
ASSERT( scriptManager ) ;
InterfacePtr<IScriptRunner> scriptRunner(scriptManager,UseDefaultIID());
ASSERT( scriptRunner ) ;
if
(scriptManager){
InterfacePtr<IScriptRunner>scriptRunner(scriptManager,UseDefaultIID());
RunScriptParams params(scriptRunner);
ErrorCode err = scriptRunner->RunFile(outFile, params);
while(kFalse);
I changed the "RunFile" arguments also
RunScriptParams params(scriptRunner);
ErrorCode err = scriptRunner->RunFile(outFile, params);
But Still I'm facing the problem in InDesign CS4. That's mean "Adobe InDesign CS4" shout down for serious error happend.
Please kindly help me, for solving this problem.
Thanks & Regards
T.R.Harihara Sudhan
Message was edited by: Adobe-InDesign CS4

How To send SAP SCRIPT AS an email.

Hi,
Any one knows how to send sap script output to users in the form of an email.
Is there any other way to send it apart from sending the script output to spool and converting the spool to PDF and send that PDF to user?
It would it helpful for me if u can let me know any peace of code as an example for the same.
Message was edited by: Narasimha

Hi,
This may be too late but here is a really easy way
Here is a snippet of code that will help you out.
You can use the OPEN_FORM of the SAPscript to have a device type of MAIL instead of PRINTER
      Form OPEN_FORM
      Open SAPscript form to send to user
FORM OPEN_FORM .
*--- Set recipient
GW_COMM_VALUES-ADSMTP-SMTP_ADDR = '[email protected]'.
*--- Set NAST details as these will not currently be set....
CLEAR GW_SNAST.
GW_SNAST-ANZAL = 1.
GW_TITLE = 'Mail Header Title'.
MOVE GW_TITLE TO GW_SNAST-TDCOVTITLE.
*--- Set sender and recipient details
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
    EXPORTING
      PI_COMM_TYPE              = 'INT'
      PI_COMM_VALUES            = GW_COMM_VALUES
      PI_REPID                  = SY-REPID
      PI_SNAST                  = GW_SNAST
      PI_MAIL_SENDER            = SY-UNAME
    IMPORTING
      PE_ITCPO                  = GW_ITCPO
      PE_MAIL_RECIPIENT         = GW_RECIPIENT
      PE_MAIL_SENDER            = GW_SENDER
    EXCEPTIONS
      COMM_TYPE_NOT_SUPPORTED   = 1
      RECIPIENT_CREATION_FAILED = 2
      SENDER_CREATION_FAILED    = 3
      OTHERS                    = 4.
*--- Open SAPscript in MAIL mode for e-mailing
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      DEVICE                      = 'MAIL'
      DIALOG                      = 'X'
      FORM                        = SapScript Form Name
      LANGUAGE                    = SY-LANGU
      OPTIONS                     = GW_ITCPO
      MAIL_SENDER                 = GW_SENDER
      MAIL_RECIPIENT              = GW_RECIPIENT
    EXCEPTIONS
      CANCELED                    = 1
      DEVICE                      = 2
      FORM                        = 3
      OPTIONS                     = 4
      UNCLOSED                    = 5
      MAIL_OPTIONS                = 6
      ARCHIVE_ERROR               = 7
      INVALID_FAX_NUMBER          = 8
      MORE_PARAMS_NEEDED_IN_BATCH = 9
      SPOOL_ERROR                 = 10
      CODEPAGE                    = 11
      OTHERS                      = 12.
When you have finished your SAPscript and call function CLOSE_FORM make sure you do a COMMI WORK after the call of this function.
You should then see the mail created in SOST.
Kind regards
Colin

How to Include JAVA script code in SAP BI7 web Reporting?

How to Include JAVA script code in SAP BI7 web Reporting?

In nw2004s there is a new web item called "Script" web item which lets you add javascript code. When you add javascript code in this web item, you don't need the opening and closing <script> tags...
Hope it Helps
Chetan
@CP..

How to download the script data into pdf file

how to download the script data into pdf file
i have one option to download the script data to pdf file --->rstxpdft4 program.
i have one doubt how to use this proogram.or any function module to download the script data to pdf file.
Thanks and regards,
Sri.

Hi Sri Sai,
I know one method to convert the sapscript to pdf file :
first generate a Spool Request for the required Sapscript
then goto transaction SP01 and copy the generated Spool Request number
now execute the SAP report RSTXPDFT4
here enter the copied Spool request number and the target directory into the parameters
execute the report
required pdf file will be generated into the target directory
i hope it will help you out
Please refer this simple program:
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Reward points if found helpful....
Cheers,
Eshwar.

How to call java script function from JSP ?

how to call java script function from JSP ?

i have function created by java script lets say x and i want to call this function from jsp scriplet tag which is at the same page ..thanks

I am new in indesign scripting, please tell me how to write a script to get content of a element in xml and then sort all the content

I am new in indesign scripting, please tell me how to write a script to get content of a element in xml and then sort all the content

Hi,
May the below code is useful for you, but I dont know how to sort.
Edit the tag as per your job request.
alert(app.activeDocument.xmlElements[0].contents)
//Second alert
var xe = app.activeDocument.xmlElements[0].evaluateXPathExpression("//marginalnote");
alert(xe.length)
for(i=0; i<xe.length; i++)
alert(xe[i].texts[0].contents)
Regards
Siraj

How to validate SQL scripts

Hi,
How to Validate SQL scripts?
I am having set of sql files i wish to run one by one if there is any error at one file i need to notify to the user.I have created Bat file in-order to execute in a sequence.how to validate in bat file
say
01.sql ---Sucess
02.sql --- Fail -- intimate and not to execute rest of sql files
03.sql
04.sql
Thanks!

933663 wrote:
I am going to create the database
cloneDBCreation.sql
CloneRmanRestore.sql
init.ora
initEDIDBTemp.ora
lockAccount.sql
postDBCreation.sql
postScripts.sql
rmanRestoreDatafiles.sql
dbname.bat
dbname.sqlSo i need to validate each and every .sql whether it succeed or not. if there is failure then needs to notify the user. Use the SQL*Plus macro/command, WHENEVER SQLERROR EXIT <n>, to terminate a sql script when it hits an error - and have it return a specific exit code to the caller (o/s command line in this case). Note that exit codes are typically defined as a single byte in shells - which means it can only returns 0 to 255.
In the command line shell, check the exit code of the previous command - which would be command than ran sqlplus and the sql script. If the exit code is for example 255, then you know the WHENEVER SQLERROR command was executed. And then you cease processing sql scripts.
Simplistically (I do not do Windows), it will look as follows:
--// sql script
whenever sqlerror exit 255
... rest of the script
@echo off
rem command shell script
prompt executing script 1
sqlplus -s /nolog @sqlscript1.sql
if ERRORLEVEL 255 goto :ScriptFailed
prompt executing script 2
sqlplus -s /nolog @sqlscript2.sql
if ERRORLEVEL 255 goto :ScriptFailed
goto :Success
:ScriptFailed
echo ...
goto :End
:Sucess
echo ..
goto :End
:End

How to enable java script in my Firefox browser? help its urgent.

how to enable java script in my Firefox browser? help its urgent.

go to '''about:config''' and search for '''javascript.enabled''' change its value to '''true'''
*[http://kb.mozillazine.org/About:config about:config]

How to enable java script in firefox

how to enable java script in firefox

See:
*[[JavaScript]]
Also make sure that an extension isn't causing problems.
* [[Troubleshooting extensions and themes]]

How to MSS ISR script.

Similar Messages

Maybe you are looking for