How to obtain Campaigns for the confirmed Business partner?

Hi,
Currently when we go to the campaigns view, we can see all the campaigns created in the system. Is there a way to obtain the campaigns relevant to the confirmed business partner.
The Search object (MktRootCampaigns) contains only one parameter called "profile_id". (Campaign Profile attached to the IC Web client profile).
This campaign profile is created in SPRO .... and attached to the IC Web Profile.
The problem here is ... this profile allows setting of parameters statically in SPRO .....
Example we can mention in the profile parameters To show all campaigns with low priority
The other way is to enhance the BOL search object.
I tried adding a new parameter to the search object MktRootCampaigns structure CRMS_IC_MKT_CAMPAIGN_SEARCH to allow dynamic search of campaigns ....
The structure CRMS_IC_MKT_CAMPAIGN_SEARCH does not allow enhancement of the search structure... since its enhancement category is "cannot be enhanced"
I checked note 914809. But this structure does not allow me to change the enhancement category either.
Any insight into this would be helpful.
Kind Regards
Vandana

Hi,
Something like this is given in the interaction center book. With call lists though ...
campaigns and call lists use the same GENIL class.
It should be of help.
Regards
Shivani.

Similar Messages

Which value should I send for the field "business partner type " in DTW

I need your help. I am trying to create a new business partner using DTW. Please let me know wich possible values should I send to DTW for the field "Business Partner Type" (this label appears on sap-bo when enteringa new BP).
The database field name is OCRD.cmpprivate, so I tried to find the related field in the input file and I found "CompanyPrivate" is this the corresponding field for the "business partner type"?
I have been trying with the following values but the DTW fails with the error "invalid item name in enum BoCardCompanyTypes":
tYES
tNO
cCompany
cPerson
I
C
cI
cC
Thank you for your help
Jorge Manzo

Please note: I use DTW Version 88.1.7; API Version 8.81.319
To set CmpPrivate (it is exactly BoCardCompanyTypes) use following:
cCompany - Card represent a company.
cPrivate - Card represent a private person.
To set CardType see Godon's replay.
A lot of info you can find in "SAP Business One SDK - Help Center" docs.
Thanks,
Grzegorz

How to fetch data for the Change Request in PROCESS_EVENT

Hi All,
I need to write some custom logic on Save/Submit button. For this I am planning to enhance the PROCESS_EVENT method of class CL_USMD_CR_MASTER. Within this method I need to access runtime data of the change request currently being processed.
I am going to create a post-method exit for this PROCESS_EVENT method. Is this correct?
I have heard we have APIs in MDG which can be used to fetch data, however I do not know how to use the same.
Can someone please help me with sample code how to fetch the runtime data of the Change Request
Thanks in advance.
Regards,
Vanessa

What MDG domain are you working on? What you are trying to do is called "reuse mode" enhancement and you do NOT want to tinker with the FPM feeder classes in this case. SCN document Configuration and Enhancement of SAP Master Data Governance contains many examples on how to achieve this.
This is a how-to document for MDG-M reuse mode enhancement: Extend MDG-M Data Model by a New Entity Type (Reuse Option)
This is a how-to document for MDG-C/S reuse mode enhancement: SAP How-To Guide: Extend the MDG Business Partner - Node Extension (Reuse Option)
Keep in mind, these examples are mainly for additional "master data" fields. If you need additional fields that are not master data but are more related to the Change Request itself, you should use this how-to document: Enhancement of the User Interface Building Block for Change Requests
Again, all of these documents can be found on the first document I referenced above. I suggest that you bookmark it.

How can i define the same business partner as Vendor and Customer and link between them

Hello Professionals,
I want to define the same business partner as customer and vendor and link between them,
How can i do this in SAP B1?
Thanks in Advance,

Hi Karem
Our Account People doing like this only in my company.
If you Raise A/R Invoice means customer list only show in Business Partner List.
If you Raise A/P Invoice means Vendor list only show in Business Partner List
We Follow different Code for Customer and Vendor as show below.
for Vendor = Code Starts with V0001
for Customer = Code Starts With C0001
With Regards
Balaji

How to configure Ogone for working with business catalyst ?

How to configure Ogone for working with business catalyst ?
In france ogone seems to be the only solution for seamless payment and there's no explications on the forum to configure it.
Thx for your answers

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

HT4009 How to obtain refund for unauthorized in-app purchase in Real Racing 3 game

Recently my 6 year old son was playing Real racing 3 game, he has without our knowledge clicked "Buy" on few options and I have been billed Rs.16610 on my credit card. He was not prompted for any password when he clicked buy option.
As soon as we received alert on these transactions, we blocked the credit card and also removed the card from the itunes account to avoid such mistakes in future.
We need help to find how to obtain refund for this transactions made without proper consent.
Thanks

You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can turn off in-app purchases on your iPad via Settings > General > Restrictions > In-App Purchases 'off, and you should also have a Require Password setting on the Resrictions screen which you can set to 'Immediately' (the default is a 15 minute perid during which it doesn't need re-entering).

How to obtain license for 10 users of siebel software?

Hi All,
Can anybody please tell me:
How to obtain license for 10 users of siebel software?
how much does that cost (in US $)?
and how to become partner with siebel for implemeting siebel applications
Thanks,
viswambhar sarma.

Updated: March 2015
National Instruments provides this forum as a courtesy to its customers. However, this is not the primary method for requesting support and assistance with the DASYLab product. NI does not actively sell the DASYLab software, nor does it actively support it.
Where else can you obtain assitance?
Your reseller - it's likely that they are familiar with your hardware and can provide help.
The www.dasylab.com web page has updates, drivers, product information, an extensive list of technical notes.
Measurement Computing Corporation has product information, product updates, and support information.
In Europe, MeasX GmbH & Co Kg sells, supports and enhances the DASYLab software
We recommend that you contact your reseller first. They know your hardware and software environment, and are most likely to be able to assist you quickly.
You can request help directly from a support engineer by going to the Support section of the www.dasylab.com web page. This is automatically routed based on geography, to the person best suited to assist you.
If you post a question in this forum, we cannot guarantee a response time.
When requesting support for DASYLab
DO NOT post your full DASYLab serial number
Please tell us
the version of your DASYLab software,
the level of your software (Lite, Basic, Full, Pro)
the exact DAQ device by manufacturer and model,
your operating system and computer,
and, if appropriate, a copy of your worksheet.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

How to implement tooltip for the list items for the particular column in sharepoint 2013

Hi,
I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
Any help will be appreciated

We can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/

How do I test for the presence of an active open document in Photoshop?

I’m new to Adobe scripting, and one of my first scripts deals with the activeDocument in Photoshop.
If there is no activeDocument, I want to display a message and terminate the script. My efforts
so far have been met with frustration. While developing the script in ExtendScript Toolkit,
I used the test expression "activeDocument in app", and everything worked as expected. And when I installed the script
in the Photoshop scripts folder and ran it from Photoshop with a document open, it also worked.
But when I ran the script from Photoshop with no document open, it failed.
Moreover, after that,the script failed when I tried to run it in ESTK.
I did some testing and found that my test expression, "activeDocument in app"
was returning true, even though no document was open.
Still in ESTK, I replaced the “app” with ”Application” in the test expression. That worked when
I stepped through the script. But when I tried to run it without stopping, it stopped at the
test expression, and displayed the error message, “Application is undefined.”
So how do I test for the presence of an open document in Photoshop ??

After posting this, I discovered the Photoshop Scripting Forum, and I found my answer there.—
I should have used “app.Documents.length” as my test expression.

How to creat deadlock for the purchase order in SAP Workflow

How to creat deadlock for the purchase order in SAP Workflow

Hi Ben,
Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date? If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
DATA: vf_doc_date(10),
             internal_date TYPE d.
     vf_doc_date = sy-datum.              "Document date.
     internal_date = vf_doc_date.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
    EXPORTING
      date_internal            = internal_date
    IMPORTING
      date_external            = vf_doc_date
    EXCEPTIONS
      date_internal_is_invalid = 1
      OTHERS                   = 2.
Regards,
Vivek

How can I test for the bas unit enterd in a control?

How can I to create a polymorphic vi where the user can enter either volume or temperature.
how can Labwiev test for the base unit entered
pseudocode example:
input X
if X.base_unit == m^3 do .......
thanks for any suggestion to resolve or avoid my problem
Solved!
Go to Solution.

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to create Variables for the Key Figures

Hi All,
How to create Variables for the Key Figures
Thanks
Bhaskar

Hi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P

How do I Prepare for the Adobe Certified Associate (ACA) exam.

how do I Prepare for the Adobe Certified Associate (ACA) exam

I have NO idea where you should ask that question, but THIS forum is about help with installing Cloud programs
If you will start at the Forums Index https://forums.adobe.com/welcome
You MAY be able to select a forum for the specific Adobe question you have
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How to define roles for the reports that i have created using WAD?

Hi all,
Can anyone let me know how to define roles for the reports generated using WAD. And what is the procedure for creating and defining roles. Is this process take care of Bw consultant nor the basis guys.
Can anyone let me know the entire procedure about the roles in bw 3.5
thanxs
haritha

Following links might helps you
create a role
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/authorizationinSAPNWBI&

How to obtain Campaigns for the confirmed Business partner?

Similar Messages

Maybe you are looking for