How to obtain from tables Date and Time in MHP
Hello,
I'm working in a MHP project and I need to access information about the current time and hour. I have been using Calendar class but it doesn't work in my ADB. So I think that I should access to the SI tables using an asinchronus listener. Can somebody help sending some code snnipets.
Thanks very much
Hello,
yes I have tried it and it works in a my ADB but not in the real test enviorment. I have been using this expression:
Calendar cal = Calendar.getInstance();
System.out.println("La fecha es:\n Dia: "+cal.get(cal.DAY_OF_MONTH)+" Mes: "+(cal.get(cal.MONTH)+1)+" A�o: "+cal.get(cal.YEAR));
System.out.println("La hora es: "+cal.get(cal.HOUR_OF_DAY)+" minutos: "+cal.get(cal.MINUTE));
As you know this way shall be quite easier than accessing to the Tables but maybe I must access directly to the tables
Thanks very much.
Similar Messages
-
How can I print the date and time in a photo from iPhoto
How can I print the date and time in a photo from iPhoto
You want to print them on their own? Can't be done. WIth the photo? Install this
http://www.iborderfx.com/iborderfx/ -
How can I copy the date and time in Mail header?
How can I copy the date and time in Mail header?
I can copy everything else in the header for pasting in another application.
But not the date and time which is absolutely vital.
It was ok in 10.6I suppose you could copy it from the Raw Source. View>Message>Raw Source
-
HT2305 how can I correct my date and time on my 3G?
How can I correct my date and time on my 3G? Thanks in advance!
Just trying to go along the free route. I found Garage Buy This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try. -
How do I remove a date and time mark on a stored photo so I can put it into a calendar
How do I remove a date and time mark on a stored photo so I can put it into a calendar.....?
In Iphoto, yes. You can use PhotoShop Elements or some other editor. You can also crop. (You might be able to make the retouch brush smaller.)
-
How do I find the date and time stamp on pictures?
How do I find the date and time stamp for my pictures?
The Photos app will not do this but other apps will. iPhoto has an icon that when tapped with the photo open will show the EXIF information you are looking for. iPhoto is not free but you can purchase it in the App Store.
There may be other photo apps that provide this information as well.
PhotoForge2 will show the EXIF data as well as the GPS data if it is available. -
How can I get the date and time and display it on the report main page?
Gurus,
How can I get the date and time and display it on the report main page?
Thanks!Hello,
You can create a Formula Colum returning a date :
function CF_1Formula return Date is
begin
RETURN(SYSDATE);
end;
Put a Field in the Layout having this formula column as source .
Regards -
HOW DO I ACCESS PICTURE DATE AND TIME?
HOW DO I ACCESS PICTURE DATE AND TIME ON A IPHONE 4?
There may be a 3rd party app that provides for this. Apple's iPhoto iOS app provides this data.
-
How to prevent calendar from deleting dates and times from event names?
Calendar automatically discards date and time information from titles of new events. For example, creating a new event with the text "Staff Meeting 9 a.m. board room" leaves only "Staff Meeting". Calendar discards the "9 a.m. board room" information without asking. This feature is not helpful to me. How do I disable it?
>
Apple Support Communities > Mac OS & System Software > OS X Mountain Lion > Discussions -
In the past I’ve had no problem moving photos from my iPhone 4 into various folders on my computer while retaining their original date and time. I would import into iPhoto, then drag the photos from iPhoto into other folders via the Finder or Adobe Bridge (which is my principal image organizer). The original date and time of the photo would always travel with the jpeg into iPhoto and then into other folders. However, sometime during a recent session transferring photos in this way, the dates of the photos started to change at the point when I copied them out of iPhoto. Within iPhoto itself, the various original dates of the photos are retained. But in Finder and Bridge, copies of those same photos all carry the same (worthless) date: the date and time that they were imported from my iPhone. I can’t figure out what would have changed on my Mac to make it start re-dating my photos. I was happily dragging and dropping photos, and suddently I started to lose the original dates. Did I inadvertently change some settings? (I am running OS 10.6.8 and using iPhoto 8.)
(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN -
How can I display the date and time from the playhead info as a subtitle ?
Is there any way it is possible to display the video capture data and time during playback. I have seen some discussion on creating subtitles to do this, it would be nice if one could simply add a Title template with display fields for playhead information so that it automatically gets created during rendering.
In case you are wondering why on earth anyone would want this, I would like to use this for display on multisport racing videos.
ThanksThere is a Date/Time title in the titles browser, does just what it says...
-
How to enter a new Date and Time each day in a Numbers Spreadsheet...
Hi... I have finally decided to move away from Excel and really give Numbers a shot... I have an application where each day I first enter the current date and time into a particular cell of a new row and then I enter some data in cells adjacent (in the same row) as that entered date-time. Then the next day I want to again enter the (new) current date and time and add more data next to that new date-time and so forth day after day... You can't use something as simple as =NOW() because then everyday, ALL of the date-times would change to the current time... Nope, now what I want... I just want to be able to EASILY and QUICKLY enter the current date-time value in one call and then have that specific value stay there forever... In Excel, this is accomplished with the keyboard shortcuts of
<cntl> followed by a semicolon (;) for the date
then enter a single space (for separation of date versus time) followed last by
<command> followed again by a semicolon...
So all together that is,
<cntl><;><sp><command><;>
and that puts something like
4/10/2010 9:49:00 AM
in a single cell...
That's what I now want to be able to do in Numbers...
How do I do that??? Do I use the menubar item "Insert Date and Time" and if so, how exactly do I get the current time to show up in the chosen cell??? With formatting??? Is there a keyboard shortcut method like the one I mentioned that works for Excel?? I've perused the manual and though I found lots on date-time, I didn't see how to do specifically what I want to do... I likely just missed it as surely it must be easy to do...
Any feedback would be much appreciated... thanks... bob...Badunit wrote:
The result of running that script is "UI Enabled = TRUE".
I have cells named by the header values.
This may be the problem.
The script is an old one which deciphered only the letter+digit cell references.
Here is a new version which works with every kind of cell reference.
--[SCRIPT insertDateTime]
Enregistrer le script en tant que Script : insertDateTime.scpt
déplacer l'application créée dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Placez le curseur dans la cellule qui doit recevoir la date_heure
menu Scripts > Numbers > insertDateTime
La cellule pointée reçoit la date_heure.
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as a Script : insertDateTime.scpt
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Put the cursor in the cell which must receive the date_time.
menu Scripts > Numbers > insertDateTime
The pointed cell receives the current date_time.
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Yvan KOENIG (VALLAURIS, France)
2009/03/01
2010/04/11 is now able to treat every kind of cell references
property theApp : "Numbers"
--=====
on run
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
my doYourDuty(colNum1, rowNum1, tName, sName, dName)
end run
--=====
on doYourDuty(c, r, t, s, d) (*
c = columnIndex
r = rowIndex
t = table's name
s = sheet's name
d = document's name *)
local cdt
set cdt to my cleanThisDate(current date) (* the new date_time as a clean date_time *)
tell application "Numbers" to tell document d to tell sheet s to tell table t
set value of cell r of column c to cdt as text
end tell -- application …
end doYourDuty
--=====
on cleanThisDate(dt)
(* ugly code but once I got date_time with milliseconds so if necessary, I drop them *)
local l
set l to my decoupe(dt as text, ":")
if (count of l) > 3 then set dt to date (my recolle(items 1 thru 3 of l, ":"))
return dt
end cleanThisDate
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
It's available on my idisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:for_Numbers09:insertDateTime.zip
Yvan KOENIG (VALLAURIS, France) dimanche 11 avril 2010 14:16:41 -
How to set the system date and time in LabVIEW 6i?
Hi,
How can I set the time of the computer from Labview 6i? Is there any function to do this?
Thanks.Arnau wrote in message news:<[email protected]>...
> Hi,
>
> How can I set the time of the computer from Labview 6i? Is there any
> function to do this?
>
> Thanks.
Not natively that I know of. You could use a LabVIEW DLL call to link
to a Win32 API call which sets the date and time. You would need to
have privileges to do it.
Doug D.
[email protected] -
How do you change the date and time format in Pages
I've tried changing the date and time format a number of times for Pages but it does not change. I'm going to the System Preferences/Language and Text and Formats. I make the changes click on OK and go back to Pages. NO change.
Hi Uncle,
Page 116 of the Pages'09 User Guide: Control Click the date, Edit Date and Time.
Date and time can also be in a table. Format the table cell.
The User Guide is well worth a read. Download it from the Help menu in Pages.
Regards,
Ian. -
How to get last modified date and time of a file which is in apache server.
Hi ,
I need to get last modified date and time of a file in remote machine.
This file is in remote machine which has apache server installed.
I am trying to get this information by connecting to apache server from client by giving absolute URI of the file to file object.
URI is got from apache server URL by using toURI method.
when I use lastModified method , its throwing exception , because scheme of URI is not file.
I can't give scheme as file because ftp server is not installed on that server
Is there any other way to get this information .No, unless you can use an FTP client.
Maybe you are looking for
-
Problem in establishing connection with mysql 5.0
Hi, I am using JCAPS 5.1. I tried to insert data to mysql database table. But i got following error java.sql.SQLException: Error in allocating a connection. Cause: Physical Connection doesn't exist. My intention is to read file in which data are comm
-
Why doesn't ctrl click to open URL in new tab always work?
Same action as control enter (windows desktop); should open link in new tab. Works most, but not all of the time. What might be the reason for that? Using version 31; I only started seeing this behavior recently.
-
How to use real-time tracking and filing in EchoSign
Click the link to learn how to use the notification, tracking, and filing features available in the Adobe electronic signatures service, EchoSign.
-
How can we print the webreport into PDF file(not using the Web Analyzer)
Hi I have a report in 'WAD 3.5' . And this report will be executed in the web browser . My user wants to print this Web Report in the PDF file (or) import into excel file . So how can we do it , if the report is in web browser . Pls let me know regar
-
Assign field symbols in infotype 0021 BADI implementation (HRPAD00INFTY )
Hi there, In PA30 infotype 0021, i have to change the value of T_VIEW_REPID by implementing BADI HRPAD00INFTY [Program MP002100->screen 2000->MODULE BEFORE_OUTPUT->PERFORM badi_before_output(sapfp50m)]. I'm trying to use field symbols (as below) to c