How to open sounds and audio properties using Labview function

Hi All,
How to open the sounds and audio properties of the control panel using the Labview system exe vi.
Is there any dll also to open this property.
If there is dll which is that and how to program the dll to serve my purpose.
Solved!
Go to Solution.

Have you looked at the "Graphics and Sounds" section within the Functions Palette (Block Diagram)? There are VI's that already exist for this.
R
Message Edited by JoeLabView on 09-04-2008 07:44 AM
Attachments:
sounds.PNG ‏12 KB

Similar Messages

  • How to send video and audio (videoconference) using JMF without using RTP

    Hi everyone,
    I am creating an application using JMF, a videoconference, but I would like to transmit the packets by myself without using RTP. I would have a socket (or virtual Serial Port -- > Bluetooth) and I would send the info that way. Is it possible??
    Thanks in advance!!
    Cheers

    Yeah, you'd need to implement something like this for that.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]

  • How do I play CD audio tracks using LabVIEW?

    I need to be able to play and stop tracks from CD's. Is it possible. I know it's easy to play wav's but I need to play the source.

    Hi,
    I've made an example for you based on MCI command
    mciSendStringA from winmm.dll
    This example plays the specified track from CD.
    The idea is in sequential sending of the next strings to driver:
    "open cdaudio wait"
    "set cdaudio time format tmsf wait"
    "play cdaudio from T1 to T2"
    "stop cdaudio wait"
    "close cdaudio wait"
    The example is attached and works fine on my PC.
    Good luck.
    Oleg Chutko.
    Attachments:
    PlayCD.vi ‏48 KB

  • Camera microphone dose not appeer at Sounds and audio devices properties

    My webcam vista pro disappeered from the list of voice recording hardware in the Sounds and audio devices properties. I alradytried uninstall and reinstall, and it didn't work. how can I make my computer to recognize it's

    There is no built-in microphone for Vista Plus either. The current selling webcam model that has built-in microphone is Live! Cam Optia AF and Live! Cam Voice. You can also use this comparison chart to see which webcam has built-in microphone.
    http://www.creative.com/products/com...lect.asp?cat=4
    Jason

  • Audigy , Sound and Audio Devices Properties 'No Audio Device' appears

    <p class="MsoNormal">Out of the blue, in the Sound and Audio Devices Properties, on the Volume tab ?No Audio Device? appears.
    On the Sound tab of Sound and Audio Devices Properties, my Default Device says ?Modem # Line play back and is my only drop down choice. I made no configuration changes or installed any new software, it just stopped working.
    I have searched for solutions, to no avail. I have an ?!? next to the Microsoft Kernel Audio Mixer in Device Manager that upon re-install displays a message that there was a problem installing this hardware(MEDIA) I/O operation has been aborted because of either a threadd exit or an application request(both installing from driver folder and recovery CD).
    I don?t particularly care what sound device I have, just one that works again. I?ve uninstalled the sound devices and let them re-install on reboot and have checked the BIO settings (I don?t have any sound related settings there).
    In Admin Tools > Services ?Windows Audio? is started and set to Automatic. When I manually try to play a windows sound in the Sounds tab I get an error message that says my sound card may be in use.
    Under Sound and Audio Devices in Device Manager I currently have(when I ?Show Hidden?):
    -Audio codecs
    -Legacy Audio Drivers
    -Legacy Video Capture Devices
    -Media Control Devices
    -Video codecs
    Don't know what else to try. Any help would be appreciated.

    cesario85 wrote:
    OK The sticky label says SB0240
    Here's the screenshot:
    [img"]http://www.strikeforceguild.com/temp-images/IRQs.gif" width="640" height="45[/img]
    I have since tried putting in a different sound card (another soundblaster, I think a 28 model) and installed its drivers but had the same problems. Im having a go at using the onboard sound though, just to see.Message Edited by cesario85 on 09--2005 06:57 PM
    Audigy shares IRQ with IDE controller and firewire controller. This is not good.
    NOTE: I suppose you're running your PC on "Standard PC" -mode (since IRQ's >5 not showing). If so, you can try to assign IRQ for the PCI slot, Audigy is installed, manually from BIOS. See your motherboard manual page 4-26.
    Can you check if your PC is running as "Standard PC" and not as "ACPI Uniprocessor PC" (Device Manager --> Computer). Make it "ACPI Uniprocessor PC" --> you get more IRQs (virtual) in use.
    NOTE: You may need to reinstall OS to get this done.
    Also you may need to enable APIC mode on BIOS.
    How To:
    A) Go to 'Device Manager' a short cut to get there is "Right Click" on the My computer Icon on your desktop (Control Panel --> System --> Hardware),
    B) Next click on 'Computer', then double click on 'Standard PC'. Then select 'Driver' and then 'Update Driver'.
    C) At this point you will see a screen pop up asking you to do this "Automatically" or Select 'Display a list of the known drivers for this device', - Choose this option.
    D) Next you will see - 'Show all hardware of this device class'. Now you can select "ACPI Uniprocessor PC" in the list shown in the window to the right.
    E) Now Windows needs/will re-start and re-install all hardware/ settings needed to run in this configuration.
    .jtpMessage Edited by jutapa on 09--2005 0:23 PM

  • My computer has lost its sound and audio? how can i get it ?

    My laptop has lost its sound and audio. I dont know how to fix it. help me please.

    It's not lost. It's never there. FaceTime icon is only present in ipad and ipod touch. You can use FaceTime right of Messages. check this link out : http://iphone-and-i.blogspot.com/2012/01/how-to-activate-facetime-in-iphone-4s.h tml

  • I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it

    I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!

    Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
    Mac OS X: Gray screen appears during startup
    Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS).

  • I have downloaded the 30 day free trial using Adobe Download Assistant but I do not know how to open it and start using it.

    I have downloaded the 30 day free trial using Adobe Download Assistant but I do not know how to open it and start using it.

    This was so annoying!! It took me a good couple of hours but i figured it out, you need to do the following: Go to the folder where you saved the download (in my case i saved it in My Downloads) -> click on 'Adobe Photoshop Elements 12' -> click on 'PSE 12' -> click on 'Setup' (select the icon which is a box with a shield) -> follow instructions and....voila! You will need to restart when it suggests so save anything else first, then when it reboots you should see the icon on your desktop....hpe this helps!

  • Satellite P30-145: Don't have an audio device in 'Sounds and Audio devices'

    Hi guys,
    I've only just fixed one problem with the help of one fantastic member but now I have another!
    All of a sudden my speakers decide not to work!! I checked the volume etc and alll was fine but when I went in control panel>sounds and audio devices it says I don't have an audio device!!!
    It worked fine this morning and I havn't done anything that could have done this.
    These problems I'm having are all spontaneous, I don't know what's going on!
    Does anyone know how I can fix this and does anyone suspect virus activity? (I have done a scan which said I don't have any)
    I use a P30-145
    Many thanks

    Hi
    Did you check the device manager?? Is the sound card listed properly in the device manager or some yellow exclamation marks appear?
    Did you try to reinstall the sound driver? If not, please try it.
    Of course I would also recommend to update the anti virus applications and to scan the system for virus and malware

  • Downloading images and audio file using java

    Dear All
    I have a directory on my webserver which contains images,audio files and many other data files.
    I want to download all the file but the problem is when i download image and save it, it is not viewable. I dont want to use Image class as i may have to downlaod audio files too. Please guis which stream shouldi open to download any kind of content using same code.
    Thanks in advance. And if u have some example please let me know
    Regards
    Jafery

    downloading images and audio file using java -------------------------------
    how to write it back to dataoutputstremI don't understand what you are talking about.
    Server: DataOutputStream -> Client: DataInputStream -- the two is a pair.

  • How to install sound and vibration toolkit 8.5

    Hello all, I have just started using labview and would like to run the "SVXMPL_Third Octave Analysis for Multiprocesor" example as an example for multithread programming, but I run into the issue that the "Sound and Vibration" toolkit is required before running the example.  I have installed the labview 8.5. I have gone through the posed link and gone through  the list of products installed in my machine (ControlPanel>Add and Remove Programs> National Instruments Software), but I couldn't find the "sound and vibration toolkit". I have tried to run the installation setup in order to add the toolkit. it looks like I have already installed all the available software. I don't know how I should install the toolkit.  I appreciate on any comments on how to install the toolkit.   I appreciate if you can help me on how to install "sound and vibration toolkit" in my machine.  

    Never mind.  I got it.

  • My sounds and audio is not working. it's not in mute. help please

    i need help. my sounds and audio is not working. but it's not in mute button.

    Hi,
    Can you post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to create fourier transform properties using labview

    Hi everyone
    i am a new user to Labview and i only have 2 weeks left to complete an assignment.
    This assignment involves the implementation of the various types of fourier transform properties using Labview. These properties include linearity, time shifting, frequency shifting, time scaling,
    I do not really know how to implement them using Labview
    PLS HELP!!!
    Thanks

    i am refering to the fourier transform properties listed below:
    A) time shifting
    x(t-a) ------- >  exp (-jwa) X(w) 
    For the time shifting property above, i have problem creating the exponential term using labview
    B) time scaling
    x(at)-----------> 1/a X (w/a)
    C) Time convolution
    Y(w) = F[h(t) * x(t)] = H(w)X(w)
    where * stands for the convolution operation and F stands for fourier transform
    Please provide diagrams if possible. Thank you
    PLEASE HELP!!!!!!!!  THANKS!!!!!!!

  • I have a iPad2 you tell me how to view movies and games to use facebook

    I have a iPad2 you tell me how to view movies and games to use facebook.
    Thanks and best regards,
    Luigi Vitali

    Hi Luigi,
    well, your Question is not very concrete.
    you can watch Film with Itunes. You can rent or buy there Movies.
    You also can sync movies from your mac to the Ipad - just add them to the Mediathek and sync the Folder/File. Quick Time give you the Function - put these open Video File to Itunes. You also have the possibilty in imvoie. 
    With Facebook games, i cant help help you - i dont like Facebook, and i dont use this service. But when these games are Flash Games you arenot able to use them with you Ipad, because ipad have not Flash support.

  • How to unlink video and audio in FCPX

    I am new in FCPX.. can someone tell me how to unlink video and audio in FCPX ? and how to mute audio rather than low the -db ?

    There's no 'Unlink' audio (as such) in FCP X but if you select a clip in the timeline, and press Shift+Ctrl+S, the audio breaks away from the clip. Select this, and you can toggle it on and off by pressing V.
    Take care with this, because it's easy to get the audio out of sync. You need to move the audio and video together if you have to move them, so I would select them both and press Option+G to make them into a Compound Clip (to preserve sync).
    To mute the audio embedded in a clip, select the clip in the timeline and press Cmd+4 to open the Inspector.
    Click the Audio Tab at the top of the Inspector and uncheck the Audio Waveform(s). Your Audio will be muted.
    To mute audio for the entire project, go to the Roles tab in the Timeline Index (next to the film reel icon) and uncheck Audio or Dialogue (as appropriate).
    Andy

Maybe you are looking for