How to open the second VM in Oracle 11gR2 2-nodes RAC system ?

Folks,
Hello. I have been installing Oracle Database 11gR2 RAC system using 2 nodes that are 2 Virtual Machines (rac1 and rac2) on the top of VMPLayer 3.
I follow the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html to do.
The original Virtual Machine rac1 has run correctly. I configure rac1 network (eth0 and eth1) by opening VM rac1 and using command "[root@rac1\] #neat" as root user to invoke the network configuration.
For the second Virtual Machine rac2, I simply copy all files in "C:\VM\rac1" into "C:\VM\rac2". Then I have done the following:
1) In the directory "C:\VM\rac2", rename "rac1.vmx" to "rac2.vmx".
2) Change display name from "rac1" to "rac2" in the file "rac2.vmx".
The next thing to do for rac2 is to open the Virtual Machine rac2 and configure its network (eth0 and eth1) by using the command "[root@rac2\]#neat" as root user.
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1).
Can any folk tell me how to open the VM rac2 to configure its network by this step ?

Hi,
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1)."rac2" is a new virtual machine after you copied and changed the display name and you need to add this in the vmware enventory (I am talking about vmware server and vmware player should have the same way as it is supposed to run multiple vritual machines on your PC). Then it will be visible it to you. Now start this new machine and edit the network configuration.
Salman

Similar Messages

How to check the load balancing in Oracle 11gR2 2 node RAC

Dear All,
Can any one please assist me how to check whether the incoming connections are evenly distributing across the nodes..?
We have two nodes, when we check the sessions counts in both nodes, Most of the time we could see node -1 has more no of sessions than node-2..? So just wanted to know whether load balancing is happening or not ...? If not how to enable it and distribute the incoming connections evenly..?
Oracle 11gR2 / RHEL5

SQL> select inst_id,count(*) from gv$session where username is not null group by inst_id;
INST_ID COUNT(*)
1 43
2 40
Not sure how to check the users are connecting through scan or not ..? But below are scan setttings...
SQL> !srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
SQL> !srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node za-rac-prd-02
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node za-rac-prd-01
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node za-rac-prd-01
SQL> !srvctl config scan
SCAN name: rac_prd.abc.local, Network: 1/10.100.130.0/255.255.255.192/eth6.64
SCAN VIP name: scan1, IP: /rac_prd.abc.local/10.100.130.55
SCAN VIP name: scan2, IP: /rac_prd.abc.local/10.100.130.54
SCAN VIP name: scan3, IP: /rac_prd.abc.local/10.100.130.53
SQL>

What to audit and how to manage the audit records in oracle 11gr2

can anyone help me how to audit and manage the audit records in oracle 11gr2

867726 wrote:
can anyone help me how to audit and manage the audit records in oracle 11gr2
Hi,
I would recommend have a read this link for details http://download.oracle.com/docs/cd/E11882_01/server.112/e10575/tdpsg_auditing.htm#TDPSG50000
Cheers

How to add a second database along with existing two node RAC environment

Hi,
I was wondering if anyone can help me with this.
My Environment:
1. Two node RAC Cluster database (11.2.0.2) with ASM running perfectly (Oracle Sid = test-1)
2. I have installed a second single instance db on node 2 (Oracle Sid = test-2) with NTFS file system for datafiles
3. Database is up and running, but I am not able to connect it from any client.
4. I am getting ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
5. Database (test2) is registered with grid LISTENER
5. TNSPING from client machine response is ok
Am I missing something here, happy to provide more info if requested.
Thanks,
PS

C:\Users\root.test_prod>lsnrctl
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 23-FEB-2012 11:58:05
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Start Date 18-FEB-2012 19:51:47
Uptime 4 days 16 hr. 6 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\11.2.0\grid\network\admin\listener.ora
Listener Log File C:\app\11.2.0\grid\log\diag\tnslsnr\IRIS11G-DB-2\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.202)(PORT=1520)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.215)(PORT=1520)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1322 refused:0 state:ready
LOCAL SERVER
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 4496>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=57695))
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 9340>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=58653))
The command completed successfully
LSNRCTL>

How to create second database at ASM in 4 node RAC system

Hi Experts,
we use 4 nodes RAC (11.0.1) with 10.2.0. 4 database in red hat5.0
we want to add second database at ASM in RAC system based on manager decision.
how do I add second database in ASM with exist database?
Do I need to created new ASM insatnce?
how to create two new diskgroup? is it under existing ASM instance or new ASM instance?
how to reset ASM properity to support ( or new) ASM instance and two database?
Do I need to configure AMS again after added more space into ASM?
I could not find ducument that add seconf database into ASM in RAC system.
I want add second database by dbca. any experience for add second database in ASM RAC ?
Thanks for help!
JIm

Hi... I'm in the same situation.
I need to add a new second database on a RAC installation based on already available ASM instance.
I'm using 11gR2.
I read your suggested documentation. Then I typed asmca and analyzed my asm configuration:
As you can see I have a DISK GROUP NAME with several FREE space.
!http://img522.yfrog.com/img522/8405/dbca20100203173248.jpg!
If I select Volumes tab the following is my current configuration:
!http://img682.yfrog.com/img682/562/dbca20100203173343.jpg!
Selecting Create button, I can insert some values as you can see:
!http://img403.yfrog.com/img403/9889/dbca20100203173403.jpg!
First question:
Is this the right way to create space for a new database ? Consider that running dbca.. no DISK GROUP NAME is available.
Second question:
When I created my first database on this DISK GROUP NAME no volumes were created. Why now I have to do it ? Is this necessary to really separate datafiles coming from different databases ?

Oracle 11gR2 (2 node) RAC Architecture requirements for ASM implementation

My architect is the following:
* RAC1 server of Red Hat Linux Enterprise 5.5 64bit
* RAC2 server of Red Hat Linux Enterprise 5.5 64bit
* NFS Server (SAN) with Red Hat Linux Enterprise 5.5 64bit
- Exported files systems for Shared Data, OCR and Voting Disks to nodes RAC1 and RAC2
I've installed the ASM packages on to my NFS Server (SAN) and then realized that I still need a way to share the storage. It is my understanding that Oracle ASM for Red Hat Linux Enterprise 5.5 64bit DOES NOT PROVIDE Shared Storage to the other nodes (RAC1 and RAC2). It seems that I need something else???
I've implemented Oracle RAC 11gR2 using NFS and wanted to try building Oracle RAC using ASM in my playground (home server's).
Does anyone have any ideas on how I might be able to use ASM with out having a true network shared storage. I'm using NFS because it is part of the Red Hat Enterprise 5.5.
Any ideas are appreciated !!!

Hi,
I would't recommend NFS for RAC in a enterprise solution. However if you are doing this for your playpan, then this is what you can do.
Once the NFS shares are presented to the servers, you need to mount your filesystems on the RAC servers to access the NFS shares.
e.g, If the the following NFS shares are presented to rac nodes:
/mnt/disk1
/mnt/disk2
And let say you want to have your ocr and voting disks on /mnt/disk1 and database on /mnt/disk2.
Firstly, you need to mount the shared on one of the rac nodes as follows. I will mount /mnt/disk1 as /u01/shared for my ocr and voting disks and /mnt/disk2 as /u01/asmdata by updating my fstab file as follows:
nfs_server:/mnt/DISK1 /u01/shared nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,noac,vers=3,timeo=600 0 0
nfs_server:/mnt/DISK2 /u01/asmdata nfs rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,actimeo=0,vers=3,timeo=600 0 0
Mount the FS on both servers and then create the block devices into each filesystem. You don't need to run oracleasm to create disks on it but rather change your ASM discovery path to the location where you have the block devices created and mount your asm diskgroups.
That is how I got my 11g RAC setup.
Hope that helps.
Pranilesh

Oracle 11gR2 2 node RAC on Oracle Linux - can't discover

Hi folks,
My rac1 can't discover iscis targets on openfiler, please assist/help/guide, been stuck for quite some time :-(
[root@rac1 send_targets]#
[root@rac1 send_targets]# iscsiadm -m discovery -t sendtargets -p openfiler
[root@rac1 send_targets]# ping openfiler
PING openfiler (192.168.1.11) 56(84) bytes of data.
64 bytes from openfiler (192.168.1.11): icmp_seq=1 ttl=64 time=0.284 ms
64 bytes from openfiler (192.168.1.11): icmp_seq=2 ttl=64 time=0.224 ms
64 bytes from openfiler (192.168.1.11): icmp_seq=3 ttl=64 time=0.226 ms
64 bytes from openfiler (192.168.1.11): icmp_seq=4 ttl=64 time=0.211 ms
^C
--- openfiler ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.211/0.236/0.284/0.030 ms
[root@rac1 send_targets]# iscsiadm -m discovery -t sendtargets -p 192.168.1.11
[root@rac1 send_targets]# service iscsid status
iscsid (pid 2446) is running...
[root@rac1 send_targets]# uname -a
Linux rac1.mydomain 2.6.32-100.26.2.el5 #1 SMP Tue Jan 18 20:11:49 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
[root@rac1 send_targets]#
If possible to just direct me to some link, I'm following this: http://www.oracle.com/technetwork/articles/hunter-rac11gr2-iscsi-088677.html#8
But it is not telling, if it doesn't discover ... then what?
Thanks in advance.

Hi ,
Did you install the iscsi-initiator-utils rpm package in all nodes? we must install this package in all rac nodes, and then discover the LUN in all nodes.
Also try giving the ip address of openfiler instead of giving the hostname
Regards,

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?

Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

How to open a second grid, by clicking on first grid

Hi
On my htm page, i have a grid, by clicking on any of row of the first grid, i want to open a second grid, below the first gird, which will contain only the values of that row.
For the first gird, I am using the code      <PARAM NAME="DoubleClickEvent" VALUE="Doubleclick">
and i have written a function as Doubleclick in the java script.
Now want code i should write under the function (Doubleclick) in the java script.
Can you help me out with the code for the same.
thanks,
Ashish

Hi
Padma,
I am new to this technology, can u tell me how to hide the second grid, what code i should add in the applet.
And my grid is containting the following data:
Airline             AirportTo        AirportFrom      Price
Jet                     BOM                 DEL                    4500
Kingfisher           PUN                  IND                     4000
Say, now when i will select 2nd row, my second grid should get following data
Airline             AirportTo        AirportFrom      Price
Kingfisher           PUN                  IND                     4000
Can you explain the code more in detail.
thanks,

How to open a package body in Oracle sql developer

How to open a package body in Oracle sql developer..any shortcut for that

I need another way to get to my package body. I'm on a locked down system, so the only way I can reference anything is if I already know the name of it. I accidentally overwrote my text document that I was using to work on it and I closed out of the package body in sqldeveloper. There must be a command, like an alter or some such. Anyone know the old fashioned way of looking at a package?

How to open the Data Perspective function of Smart View in EAS?

How to open the Data Perspective function of Smart View in EAS?
I use my Smart View to connect one ASO cube, and I found the button of Data Perspective is grey. It's not available.
In Smart View Users' Guide, it says:
Note: Data perspective may not be enabled in your Smart View system. Your options for data perspective are enabled and configured by the administrator in Oracle Essbase Administration Services.
But I could not find how to configure the this option in EAS.
Does anyone know about this?

I have already turned on the varying attributes function, but the data perspective button is still grey, not available.

How to open the forms in Browser.

Dear all,
can anyone tell me how to open the forms develop in form 6i in browser like Internet Explorer.
Muhammad Nadeem

Hi,
The following Host built-in takes you to the specified site,
Host('Netscape http://www.oracle.com');
Best Regards,
Deepak Rai
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rama Ala ([email protected]):
Hi,
We can open internet browser by using HOST command in FORMS. How to open specific URL into the browser through FORMS.<HR></BLOCKQUOTE>
null

Help: How to open wrapped store procedure on oracle database

Dear Gurus,
how to open the wrapped store procedure on oracle database?
anyone can help me...?
reply me soon
take care

Any other way so that I can see the flow of data that written on wrapped store procedure?You need to see the source code which has keeped outside of database. Read a wrapped code is not common for humans...
reply me asap If you want an asap answer, raise a SR for oracle support, not through a forum which is based on volunteers.
Nicolas.

How to open the OWB Design Center in Linux

Hi All,
Currently, our OWB10.2. is installed in the Window2003 server, I could login the servers and go to Program -> OWB -> Design Center to open the Design center and create my own project or mapping.
We just install OWB 10.2.0.4 in a Linux Ret Hat server, I don't know how to open the Design Center from the Linux.
Should I open it from the Linux server(How), or I could remotely launch the Design Center from my PC (Window XP) to create my project (actually try to migrate project from the weindow2003 server to Red hat Linux server)?
Thanks
Kevin

Hi David,
I found the file and executed it, but got this list of errors, do you have any idea?
Thanks
Kevin
[kchia@odsdev01 unix]$ ./owbclient.sh
StaticLoader: Setting locale to en_US_
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at Launcher.main(Launcher.java:167)
Caused by: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:134)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
at sun.awt.motif.MToolkit.<clinit>(MToolkit.java:81)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at java.awt.Toolkit$2.run(Toolkit.java:748)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:739)
at java.awt.Component.getToolkitImpl(Component.java:830)
at java.awt.Component.getToolkit(Component.java:814)
at java.awt.Component.createImage(Component.java:2632)
at oracle.wh.ui.common.CommonUtils.getIcon(CommonUtils.java:622)
at oracle.wh.ui.framework.beans.splash.SplashBean.setImageLoc(SplashBean.java:111)
at oracle.wh.ui.framework.beans.splash.SplashBean.<init>(SplashBean.java:42)
at oracle.wh.ui.framework.StaticLoader.main(StaticLoader.java:67)
... 5 more
java.lang.reflect.InvocationTargetException

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

What happens when you try to use the clone stamp tool?
It should work with the images side by side.
You can setup photoshop cc to be like photoshop cs2 was on your other mac, by going to Photoshop>Preferences>Interface and unchecking
Open Documents as Tabs and Enable Floating Document Window Docking
And also going to Window and unchecking Application Frame

How to open the second VM in Oracle 11gR2 2-nodes RAC system ?

Similar Messages

Maybe you are looking for