How to output jpg from g3110 scan

New g3110 scanner. How can I get jpg output of photos scanned?

Hi,
Based on the following specs, it should scan as jpg and many formats buy default:
http://www8.hp.com/au/en/products/scanners/product-detail.html?oid=3723468#!tab%3Dspecs
The following manual may help:
https://multimedia.nscad.ns.ca/pdfs/scanner_hp_canjet_g3110.pdf
Have you installed software and drivers to your computer yet ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to output sound from Zen Neeon to speaker without using

how to output sound from Zen Neeon to speaker directly?
as far as i know, i can only play content in my mp3 player using speaker with usb cable connected to pc
i just wonder how i play using "play" button in mp3 player and the sound will output to speaker directly?
need extra line-in cable?

my speaker system is subwoofer,but i not very sure it's 2. system.
the cable from the speaker is slightly too big to connect to the player headphone jack. and no sound come out after i play.
why?

Barcode - How to output an underscore when scanning

Hi,
I am currently working with a Zebra Label that outputs some text, variables and a barcode.
We are using code39 for the barcode.
How do you output an underscore when scanning the barcode?
Does code39 support outputting an underscore? If not, what barcode style does support it?
Thanks,
John

The CLK of the FPGA is 200MHz and the Sampling frequency of the ADC is 50 MHz, so I set the FFT IPCore CLK to 50 MHz.
This is a little confusing. So is your FFT's clock pin actually running at 200 or 50? The FFT has 2 parameters: Target clock frequency and target data throughput. It sounds like you should be setting the former to 200MHz and the latter to 50MHz.
I'm guessing your output buffer is overflowing because the FFT is outputting new rames way faster than you'd read them through UART. Thus your address is rolling over a bunch of times between uart reads and the data is getting totally corrupted. You should probably drop down chipscope to see for sure, thought.
Another thing you could try is use a SR register on your buffer write enable to only capture the first output frame from the FFT.

How do i print from a scanned negative?

I scanned an old negative to my computer; how do I convert it to a positive image so it can be printed. I am using Photoshop Elements 10

Found this, it worked.
Apply the Invert filter
The Invert filter inverts the colors in an image. Use this command, for example, to make a positive black-and-white image negative or to make a positive from a scanned black-and-white negative.
note: Because color print film contains an orange mask in its base, the Invert command cannot make accurate positive images from scanned color negatives. Be sure to use the proper settings for color negatives when scanning film on slide scanners.
When you invert an image, the brightness value of each pixel is converted into the inverse value on the 256‑step color-values scale. For example, a pixel in a positive image with a value of 255 is changed to 0.
1. Select an image, layer, or area.
2. Choose Filter > Adjustments > Invert.

How to Output Nodes from XML web service to a FLV?

Hi
I've used AS3 to query a web service and obtain the resulting XML. I need to parse the result down to just a few nodes for a given location. I can tackle that separately. I am wondering how I output the parsed XML to a flash video file (.flx)? The video has place holders for the XML node values. What do I need to do to place the XML results in the video?
Thanks,
Sid

Andrei1 wrote:
What is a content of XML nodes? I am not sure what you mean by "inserting nodes". Do you mean that you want to display some information over the video?
And yes, encoders do take XMLs to inject metadata into video. But this is metadata only.
OSML = Open Source Media Framework:
http://www.opensourcemediaframework.com/
By inserting nodes, I mean that the XML web service returns data for each city, which needs to be parsed to just high temp, low temp and current condition. Those 3 values needed to be dispalyed over, or woven into, the video at each city location. My thought was that AS3 could somehow recognize the 3 placeholders for each city and insert the high temp, low temp and condition icon into each placeholder. However, when I import the FLV file into Flash, there are no elements into which I can infuse this data.

How to output value from stored procedure

Hi folks, I need to output the OrderFK from a stored procedure not really sure how to achieve this any help or tips much appreciated.
Sql code below
USE [TyreSanner]
GO
/****** Object: StoredProcedure [dbo].[AddCustomerDetails] Script Date: 11/12/2014 20:56:34 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[AddCustomerDetails]
/***********************Declare variables ***********************/
/******tblCustomer******/
@Forename nvarchar(50),
@Surname nvarchar(50),
@HouseNo nvarchar(50),
@CustAddress nvarchar(50),
@Town nvarchar(50),
@Postcode nvarchar(50),
@ContactNo nvarchar(50),
@EmailAddress nvarchar(50),
/******tblLink_OrderProduct******/
@ProductQuantity int,
@TotalProductSaleCost decimal,
@ProductFK int,
@FittingDate date,
@FittingTime Time
As
DECLARE @CustomerFK int;
DECLARE @OrderFK int;
Begin TRANSACTION
SET NOCOUNT ON
INSERT INTO [TyreSanner].[dbo].[Customer](Forename, Surname, HouseNo, CustAddress, Town, Postcode, ContactNo, EmailAddress)
VALUES (@Forename,@Surname,@HouseNo,@CustAddress,@Town,@Postcode,@ContactNo,@EmailAddress)
Set @CustomerFK = SCOPE_IDENTITY()
INSERT INTO [TyreSanner].[dbo].[Order] (CustomerFK)
VALUES (@CustomerFK)
SET @OrderFK = SCOPE_IDENTITY()
INSERT INTO [TyreSanner].[dbo].[Link_OrderProduct](OrderFK, ProductFK, ProductQuantity, TotalProductSaleCost, FittingDate, FittingTime)
VALUES
(@OrderFK, @ProductFK, @ProductQuantity, @TotalProductSaleCost, @FittingDate, @FittingTime)
COMMIT TRANSACTION

Hi brucey54,
There’re several ways to capture the value from a Stored Procedure. In you scenario, I would suggest 2 options, by an output parameter or by a table variable.
By an output Parameter, you need to make a little bit modification on your code as below:
USE [TyreSanner]
GO
ALTER PROCEDURE [dbo].[AddCustomerDetails]
@Forename nvarchar(50),
@FittingDate date,
@FittingTime Time,
@OrderFK int output
As
DECLARE @CustomerFK int;
--DECLARE @OrderFK int;
Run the following code, Then @OrderFKvalue holds the value you’d like.
DECLARE @OrderFKvalue int;
EXEC AddCustomerDetails(your parameters,@OrderFKvalue output)
Anyway if you don’t like to add one more parameter, you can get the value by a table variable as well. Please append “SELECT @OrderFK;” to your Procedure as below:
USE [TyreSanner]
GO
ALTER PROCEDURE [dbo].[AddCustomerDetails]
SET @OrderFK = SCOPE_IDENTITY()
INSERT INTO [TyreSanner].[dbo].[Link_OrderProduct](OrderFK, ProductFK, ProductQuantity, TotalProductSaleCost, FittingDate, FittingTime)
VALUES
(@OrderFK, @ProductFK, @ProductQuantity, @TotalProductSaleCost, @FittingDate, @FittingTime);
SELECT @OrderFK;
Then you can call the Stored Procedure as below:
DECLARE @T TABLE (OrderFK INT);
INSERT @T EXEC AddCustomerDetails(your parameters) ;
SELECT OrderFK FROM @T;
There’re more options to achieve your requirement, please see the below link:
How to Share Data between Stored Procedures
If you have any question, feel free to let me know.
Best Regards,
Eric Zhang

How to output HTML from com.sun.HTTPExchange

My trival web server outputs output plain text. How do I output HTML?
Thanks,
Siegfried
package xml.webservicesDemo;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.net.InetSocketAddress;
import com.sun.net.httpserver.HttpContext;
import com.sun.net.httpserver.HttpExchange;
import com.sun.net.httpserver.HttpHandler;
import com.sun.net.httpserver.HttpServer;
public class WebApp implements HttpHandler {
     public static void main(String[] args) {
          try {
               HttpServer server = HttpServer.create(new InetSocketAddress(8123),0);
               HttpContext ctx = server.createContext("/apps/myapp/myNewApp",new WebApp());
               server.setExecutor(null);
               server.start();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
     public void handle(HttpExchange t) throws IOException {
          InputStream is = t.getRequestBody();
          byte[] bBody = new byte[1000];
          int count = is.read(bBody);
          String sBody = bBody.toString();
          String response = "hello siegfried";
          t.sendResponseHeaders(200, response.length());
          OutputStream os = t.getResponseBody();
          os.write(response.getBytes());
          os.close();
}

For that kind of work, I wouldn't recommend this class ( sorry, my other reply is to your first question ).
This is a SIMPLE http server. You would have to emulate an application server ( like Tomcat ) yourself if you want full-blown servlet / jsp functionality. You could define a simple jsp-ish domain specific language and parse it yourself, though.
That might be an interesting exercise, but not one that would appeal to me.

How to output XML from package

Hi people,
Thanks in advance for reading this post!
I am new to XML DB and I wonder if it's possible to do the following:
I want to use a package that has a procedure that will output me an xml document that I will fetch from a .NET application.
What I want is this:
I have an employee table. Each employees has a set of medical restrictions and/or task history, etc...
What I want is to output an XML that would look like this:
<EMPLOYEES>
<EMPLOYEE>
<ID>1</ID>
<FULLNAME>LUCKY EMPLOYEE</FULLNAME>
<QUALIFICATION>
<ID>0</ID>
<NAME>QUALIFICATIONNAME0</NAME>
</QUALIFICATION>
<QUALIFICATION>
<ID>1</ID>
<NAME>QUALIFICATIONNAME1</NAME>
</QUALIFICATION>
<QUALIFICATION>
<ID>2</ID>
<NAME>QUALIFICATIONNAME2</NAME>
</QUALIFICATION>
<QUALIFICATION>
<ID>3</ID>
<NAME>QUALIFICATIONNAME3</NAME>
</QUALIFICATION>
</EMPLOYEE>
<EMPLOYEES>
I'm not sure of the approach to take for this, anyone can suggests me something?
Thanks a lot!

Can you paste it in here?
It may be useful for other people in the future to have something to look at!
Thanks!

How to output sound from MacBook Pro to stereo receiver/amplifier?

Does anyone here know what I would need to buy to send audio from my MacBook Pro to an external integrated stereo amplifier? I'm sure there's something. I'd like best quality so if you know of a USB solution please let me know.

Typo above, 'headphone port' not 'headphone post.'
Glad to help, and thanks for the !
FYI, the mic port is the same, so if you have a need to get digital audio into your MBP, the mic port will do that as well as analog.
The headphone port actually does triple-duty, in that it's both analog and digital out, and with the longer plug found on the iPhone headset, the headphone port can also function as an analog input.

How to remove texture from a scanned photograph

PSE 8, Epson Perfection V700 Photo scanner, Windows XP
I am scanning some old photos to use in a photobook. The photos were printed on textured paper. The texture is not really noticeable on the original photo but quite noticeable on the scanned image where the scanner picks up the hills and valleys. Can someone suggest a way to minimize the texture without blurring the sharpness of the image or is that a contradiction in terms?
Thanks. Eva

Did you try screening using the scanner's "Descreen" filter. You'll find it in the professional mode. The below article is about your scanner and shows a screen shot of Professional mode.
http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=75660&afterinter=true
When you click the + beside Descreen, you should get several options.
This is one of my epson scanners...not your model but the options should be the same or similar.
If you can't scan again or it doesn't solve the problem, have a look at this article.
http://www.scantips.com/basics6c.html

ABAP program to output data from SAP table to an XML format file?

hello ABAP experts,
Does anyone know how to output data from SAP table to an XML format file? Would be appreciated if someone show the detailed sample codes and we will give you reward points!
Thanks!

Edited by: Jose Hugo De la cruz on Aug 19, 2009 8:23 PM

CreatePDF Desktop Printer will no longer be available so how do I print a PDF from a scanned document????

CreatePDF Desktop Printer will no longer be available so how do I print a PDF from a scanned document????

Hi jwlaunch,
This document describes some alternatives to CreatePDF Desktop printer: Adobe CreatePDF Desktop Printer is no longer available
Please let us know if you have additional questions.
Best,
Sara

How to output HTML when called from a browser

We are trying to replace a small web app with a bpel app so it has to return HTML. I keep getting XML of the HTML as output from this simple app. It doesn't interpret the html. The bpel uses a simple assign that puts an HTML string into the "body" message then passes it to the "reply".
I have found out how to call this from the browser by changing "orabpel" in the url to "httpbinding" and then adding the "operation" onto the endpoint.
from: http://server:7777/orabpel/default/ws1/1.0
to: http://server:7777/httpbinding/default/ws1/processIs it possible to output html back to the browser and have the bpel look like a web page? Setting the mimetype of the output message type to "text/html" seems to have no effect at all.
Here is my wsdl:
<?xml version="1.0"?>
<definitions name="HTTPGetService"
             targetNamespace="http://services.otn.com"
             xmlns:tns="http://services.otn.com"
             xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
             xmlns="http://schemas.xmlsoap.org/wsdl/"
             xmlns:xsd="http://www.w3.org/2001/XMLSchema"
             xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
             xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/">
    <message name="HTTPGetServiceRequestMessage">
        <part name="Region" type="xsd:string"/>
        <part name="EffectiveDate" type="xsd:string"/>
        <part name="EndDate" type="xsd:string"/>
        <part name="acc1" type="xsd:string"/>
        <part name="acc2" type="xsd:string"/>
    </message>
    <message name="HTTPGetServiceResponseMessage">
        <part name="body" type="xsd:string"/>
    </message>
    
    <portType name="HTTPGetService">
        <operation name="process">
            <input message="tns:HTTPGetServiceRequestMessage"/>
            <output message="tns:HTTPGetServiceResponseMessage"/>
        </operation>
    </portType>
    <binding name="HTTPGet" type="tns:HTTPGetService">
        <http:binding verb="GET"/>
        <operation name="process">
            <http:operation location="/process"/>
            <input>
                <http:urlEncoded/>
            </input>
            <output>
                <http:urlEncoded/>
                <mime:content type="text/html" part="body"/>
            </output>
        </operation>
    </binding>

Hi,
Open up admin console. Expand "Servers" node to view servers in domain.
Right click on a server (or select Logging/ General tab) and select "view
server log".
Regards,
Jon

How to open jpg, tiff files in camera raw from elements 10 organizer

How to open JPG, TIFF files in camera raw from Elements 10 organizer.

Thanks for that Damead, I agree with you that Organiser is real pain (there is a total lack of intuitiveness if that is the correct word).
For my own work I use 'Lightroom' for around 90% of the time, only going into PSE10 for the 10% difficult bits the Lightroom can't handle.
I only needed to sort out the JPEG file opening method within PSE10 for some freinds in a small Photo Group that I run in Woodhall Spa, UK. 50% of the 12 members are beginners & a number of them do not have Raw capability on their Camera's, but now they can get their JPEG's into Camera Raw within PSE10 they have the same simple tabular form of adjustment sliders (not as many as in Lightroom of cause) but it gets over the labourious problem of going thru the PSE10's individual tool selection process each and every time since we are trying to get everyone in the Group working with individual Tools rather than the 'Auto' functions. We do this so that they learn what they are doing rather than staying 'dumb&happy' within Auto all the time & they also learn how to get more detailed control for each photo.
Ref. your comments on file handling/usage, I agree with your comments. Its far and away much more preferable to set up a file structure in 'Finder" (or in 'Explorer' if still using Windows) that you understand so you always know how to find the files. Also, I also never ever use the Camera Auto Load programme but physically 'drag & drop' photo files direct from the 'card' into the file system so I always know thier place (ie: they go into the location I want, not that which the Auto Loader wants).
As regards your comment about 'Lightroom', I don't have any problems at all since I just imported the whole of my photo file structure into the Lightroom Library Catalouge and then it automatically shows up on the LHS of the screen, still in that format, so you can search it direct within Lightroom and display all of the photo's in variuos arrangements and sizes; everything is as easy to find as it is in 'Finder' plus of cause you have all the 'Tagging' possibilities to use as well. As you add more new files into the 'Finder' structure, all you need to do in Lightroom is reimport, starting 1 level up from the new files and Lightroom will find the new files that need loading (ignoring the older ones already in the Library at that or lower levels) then 1 click and its done.
Your comments about getting others to follow a set file structure is very pertinant and also applies to evrything else that one ever does apart from just photo work; the times I have had to help others find info/files etc on their PC's because they don' know the location of anything is too many to contemplate.
Regards

How to output the digital clock and synchronization signal from the NI USB-6211

Hello,
I need to connect the NI USB-6211 to control a digital to analog convertor chip (AD5541). However, this chip requires three input signals :1) Clock input, 2) Logic input or a synchronization signal and 3) Signal Serial Data input (CS, SCLK, DIN).
how to output the digital clock and the synchronization signal from the NI USB-6211?

Hi SaberSaber,
You should be able to use the counters to generate a pulse train that could be used for clock and synch purposes.
Hope this helps. Let us know if you have more questions.
Dave C.
Applications Engineer
National Instruments

How to output jpg from g3110 scan

Similar Messages

Maybe you are looking for