How to parameterize SAP PO Performance Monitoring

Hello,
we have upgraded our SAP PI 7.1 to SAP PO 7.4 (Java Only). Now I ‘d like to parameterize the Message Performance Monitoring. I cannot find the parameter to change the amount of days in which the performance data is available. It seems that the default value is set to 7 days, but I can’t find the parameter to be changed. Please advise how to reset the parameter.
Thanks for your support.
kind regards
Daniel

Hey Leela,
thanks for your advice. But unfortunately this isn’t the value Im looking for. The parameter “xiadapter.inbound.persistDuration.default” only define that messages and their payload are available for this amount of milliseconds.
I’m searching for the parameter to change the number of days I can display in the performance monitoring. For example I can check the performance data from the 1.12.2014 until the 8.12.2014. On the 9.12.2014 the aggregated data are lost.
Which parameter I have to change to get a higher amount of aggregated performance data. Because I want to see performance data from the 1.12.2014 one month later not only one week.
I have added a Screenshot from my performance monitoring. In this view I only can see the performance data from the last 7 days (aggregate into days). I want to see the last 31 days in this view.
Thanks for advice

Similar Messages

How do I write/use performance monitor to run an action when something happens?

I notice that I get a popup if desktop resources are over-used asking me if I want to turn off the glass desktop.
That's fine.
I've been looking in Performance Monitor for how this is done, as I have a program that periodically runs amok and starts indexing my Documents directory. I usually start to notice my machine getting sluggish when the process gets to about 1.5-2+GB
in Virtual and working memory. At that point it seems to be increasing it's network usage rate geometically, and interrups will start getting delayed or lost -- keyboard will lock up for periods, lots of things freezing temporarily (music will get 10-20
second dropouts) It can even cause a complete system lockup
So what I would like to do is monitor any instance of this process by name ('explorer'), and restart it when it gets to over 1.5GB of usage.
I setup a monitor of virtual size and working memory in the performance monitor, but I don't see how to set up an alarm that starts an action to restart it. (restarting it will cause the problem to go away for anywhere from a few hours to several days).
I've no clue as to what triggers it.
I found a bunch of XML scripts in
Windows/pla/Rules with names like:
Rules.System.CPU.xml*
Rules.System.Common.xml*
Rules.System.Configuration.xml*
Rules.System.Diagnostics.xml*
Rules.System.Disk.xml*
Rules.System.Finale.xml*
Rules.System.Memory.xml*
Rules.System.NetDiagFramework.xml*
Rules.System.NetTrace.xml*
Rules.System.Network.xml*
Rules.System.Performance.xml*
Rules.System.Performance.xml.orig*
Rules.System.Summary.xml*
Rules.System.Wired.xml*
Rules.System.Wireless.xml*
These have some XML language in them that looks like it woud be for monitorying and doing actions:
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
<Rule name="$(RuleDiskSummary)" enabled="true">
   <Step select="/Report/Section/Table[@name='hotFile']">
    <Exists>
     <Otherwise>
      <Delete select="Summary"/>
     </Otherwise>
    </Exists>
   </Step>
   <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
    <Exists>
     <Otherwise>
      <Insert>
       <Node>
        <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
         <Data name="max" label="diskQueue"/>
        </Summary>
       </Node>
      </Insert>
     </Otherwise>
    </Exists>
   </Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
Question is, how can I setup it for calling a trigger script when
parameters for Explorer get out of spec.
On confusing issue that stopped me from proceeding, was the time schedule to run the report:
I only allows for once/day.
I need / want continuous monitorying -- say at 1 minute or 3 minute intervals (5 might work, not sure -- doesn't take long for Explorer to get to 1-2G with a network connection of 10Gb.
So how can I monitor and control it?
A side issue -- I notice a resource-control agent for Win 2008 -- but this was disabled for Win7.
Anyone know why resource usage on Win7 was considered less important than on Win2k8 server?
My version of Win7 is Win7-x64-sp1 "Ultimate" [sic] (it doesn't include professional features like resource control)...
Thanks...This has bothered me for over a year and has persisted through new profiles and reinstalls of of the OS.
I have a feeling it is related to MS disabling Network disks in their indexer, so Explorer ends up doing it as a surrogage for things like the search engine (with the results not stored, because they are not local -- the worst of both worlds?)... but that's
just a feeling...
Thanks!
Astara...

You can create a Data Collector Set (create manually, not template), then choose performance counter Alert, configure alert actions, from the script, seems you want to monitor the “physicalDisk” performance, so you can set the “physicalDiskCounters”
into alert action, please follow the instruction in the link below.
Monitor disk space
http://www.ms-opsmgr.eu/?cat=43
If you want to view the detailed process related about explorer when your machine getting sluggish, I'd like to introduce a tool named process explorer to you.
http://technet.microsoft.com/en-in/sysinternals/bb896653.aspx
It can clearly show you the processes running in your system, along with the hierarchical relationship and the cpu usage.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

PI 7.1 Performance Monitoring - Advanced Adapter Engine (AAE)

Hi Experts,
how can i use the "Performance Monitoring" from the RWB, to see all the messages (including the messages from the AAE) for a specific timeperiod? For example, i want to know how many messages go through the PI (including AAE) on one day.
Best regards,
Sven

Hi Sven,
Kindly find the below documents will helps you more
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c02dde55-b30d-2c10-a68b-e80e0d86336d
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10cf9746-e819-2c10-bd82-97bfbde8214a
Regards
Venkat Rao .G

Solution manager for performance monitoring

Hi,
We have implemented solution manager in our project.Can anyone tell me how is this useful for performance monitoring and how can we check expensive sql statements using this.
It would be helpful if anyone can provide me some documentation on this.
Thanks

Hi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/3f99cc89-0701-0010-9c86-eae847ae6cd2
refer above threads,
Thanks
Syf

How to genarate performance monitoring report in SAP PI automatically

Dear All,
I have a requirement where I need to automatically generate a report of monthly data of Performance monitoring in SAP PI and send it to business users.
As per my understanding, this can be achieved by pulling the data every month from the tables where these data of Performance monitoring is maintained internally within SAP PI.
Please provide me inputs as which table stores these data/ and solutions to acheive this.
Thanks
Azahar

Refer below links .. You can write abap report to make it happen
Re: Get count of the messages to particular Interface in a day and send email
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
http://wiki.sdn.sap.com/wiki/display/XI/UsefulABAPtablesinSAP+XI

Performance Monitoring - How to get the data

Hi all,
we have a tool to monitor non sap systems and services and would like to use the same tool to get some runtime information from PI services, specially soap interfaces. The information we want is available at runtime workbench, performance monitoring.
Is there a standard function we can use to get this data (EJB , Bapi, RFC, etc...) ? Today we are importing daily a file with this information from RWB, but this is enough only for statistical purposes, not for monitoring.
Some tip?
thank you.
regards.
roberti

Roberti,
Three are a number of ways to tackle these things - I usually like CCMS just because SAP spends so much time making it work for everything anyway - if your tool can connect to this - you can get some decent information from here about your system status, queue's and java.
Speficially for Messages, I don't think that there are monitors defined as RFC BADI's or BAPI's to use but if you feel saucy, tables for messages are SXMSPMAST2 and SXMSPMAST - should give you a programming head-start to get some data and pass that back although you would only replicate the functions in CCMS.
Of course with all SAP Products, you have to go through the application to get this data, no ODBC connections or otherwise - there are other options like DBCON to allow you to 'send' data to other Db's if you need to do it that way.
Hope that helps somewhat and if this answers your question, please set your thread to answered.
Edited by: David Milliken on Feb 22, 2008 8:06 PM

How to restrict user to only see Performance Monitoring in RWB?

Hi
I have an issue, where I would like to let a business person see how many requests, there have been the last 24 hours for a given interface in PI 7.11. This can be done, in the RWB -> Performance monitoring, but how do I restrict the user, to only have access to the Performance Monitoring link in RWB?
Shold I just give him the UME role "NWA_READONLY" even though, this probably will also give him access to the other links in RWB? Or is there a smarter way?
BR
MIkael

Hi,
There is no way to provide access to only Performance monitoring in RWB.

How to monitor user logs,security logs,trace file,and performance monitori

Hi guys,
pls tel me how to monitor user logs,security logs,trace file,and performance monitoring.
thanks
regards
kamal

Hi,
you can have a look in the Netweaver administration :
http://<portal>:<port>/nwa
Go to monitoring, Java system reports, etc..., you will find what you want.
Fabien.

Performance Monitor: what does ProcessingTime exactly mean

Hello,
we have to analyze the poor performance of our Idoc --> SOAP Implementation. In order to figure out,
where exactly the time get lost, we have re-check all stepts og the overall process. The Integration
Process makes some simple things:
- Receive Idoc
- map the dest. message
- Call Receiver by SOAP async
- read the Response, and set the status of the IDoc async.
All works fine but rather slow (not using the BPE is not an option!)
The Performance Monitor for the synchron SOAP Inbound Interface to the
receiving application tells us 1104 msg/h, respectively 2,172 sec/msg.
My question is, which time-periode do these numbers exactly span? Is
this the duration simply for the begin/end of the SOAP-Call independent
of the BPE? In other words: how and where can i see, whether the poor
performance comes from the fact, that the BPE just fires so few messages
per minute via the interface, or the SOAP-Call itselfs is very slow?
If the latter is true, the bad performance would have nothing to do with the
BPE but simply with the SOAP-Server, right?
Thanks in advance
Gunnar

Hi,
Please go through the below links, these will help you to analyse about the performance issues
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/489f5844-0c01-0010-79be-acc3b52250fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/defd5544-0c01-0010-ba88-fd38caee02f7?prtmode=navigate
/people/prasad.illapani/blog/2007/04/27/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-iii
Thanks
Swarup

1636215 - Performance monitoring for the Advanced Adapter Engine

Hi ALL,
How can we monitor the performance by changing the parameter to true in the above note please please help me
Thanks,
Raj

Hi Dheeraj,
Since you've gone through the note, I'm assuming you know how to activate the performance monitoring for adapter engine.
However, there are reservations against doing it in any system Dev/Quality/Production. Reason being, it becomes performance/load intensive when the perf. monitoring is on.
Still, you can diagnose bottlenecks and execution trends in Dev/Quality using performance monitoring as suggested in the note but be aware that your box is coping well with it. Please note, once activated, you don't have to do anything else. System will automatically collect performance data and you will be able to browse through it using the performance monitoring link.
How to use it???
You see a performance monitoring link in Monitoring Home (navigate via Configuration and Monitoring home from PI/PO homepage).
It will help you analyze the flow of message on periodical basis (hourly/daily etc) and will give you more stats on number of messages in that time duration, average time taken, message sizes (min, max and avg), interface-by-interface detail of runtime consumption at every stage etc.
Please go through standard SAP help for more clarity:
Monitoring Performance - Advanced Adapter Engine - SAP Library
Apart from this, there is this great blog by Suseelan around monitoring:
http://scn.sap.com/docs/DOC-35805
Hope this helps.
Regards,
Abhishek

How to work sap solution manager

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. please search first. >
Hi experts,
can anybody what is the use of sap solution manger and how its work.
Regards,
arti singh

The SAP Solution Manager supports you throughout the entire life-cycle of your solutions, from the Business Blueprint to the configuration to production processing. It provides central access to tools, methods and preconfigured contents which you can use during evaluation, implementation and operational processing of your systems.
Features
Implementing and Upgrading SAP Solutions
     Central access to all tools for your project (Project Administration, Business Blueprint, Configuration, Test Workbench, create Group Rollout templates)
     Central management of all information for your Project (roadmaps, system landscape, project documentation)
     Compare and synchronize customizing in different SAP components
Solution Monitoring
     Central System administration
     Analysis of your system landscape with Service Level Reporting
     Real-time System Monitoring
     Business process monitoring
Services and Support
Access to programs and Services to monitor and optimize the performance and availability of your system landscapes, and minimize risks when running your systems
Service Desk
Solution support with workflow to Create and Process Problem Messages
Change Management
Manage change requests, with workflow to trace and audit changes and transports in your system landscape with Change Request Management.

How to improve query & loading performance.

Hi All,
How to improve query & loading performance.
Thanks in advance.
Rgrds
shoba

Hi Shoba
There are lot of things to improve the query and loading performance.
please refer oss note :557870 : Frequently asked questions on query performance
also refer to
weblogs:
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695
This is the oss notes of FAQ on query performance
1. What kind of tools are available to monitor the overall Query Performance?
1. BW Statistics
2. BW Workload Analysis in ST03N (Use Export Mode!)
3. Content of Table RSDDSTAT
2. Do I have to do something to enable such tools?
Yes, you need to turn on the BW Statistics:
RSA1, choose Tools -> BW statistics for InfoCubes
(Choose OLAP and WHM for your relevant Cubes)
3. What kind of tools is available to analyze a specific query in detail?
1. Transaction RSRT
2. Transaction RSRTRACE
4. Do I have an overall query performance problem?
i. Use ST03N -> BW System load values to recognize the problem. Use the number given in table 'Reporting - InfoCubes:Share of total time (s)' to check if one of the columns %OLAP, %DB, %Frontend shows a high number in all Info Cubes.
ii. You need to run ST03N in expert mode to get these values
5. What can I do if the database proportion is high for all queries?
Check:
1. If the database statistic strategy is set up properly for your DB platform (above all for the BW specific tables)
2. If database parameter set up accords with SAP Notes and SAP Services (EarlyWatch)
3. If Buffers, I/O, CPU, memory on the database server are exhausted?
4. If Cube compression is used regularly
5. If Database partitioning is used (not available on all DB platforms)
6. What can I do if the OLAP proportion is high for all queries?
Check:
1. If the CPUs on the application server are exhausted
2. If the SAP R/3 memory set up is done properly (use TX ST02 to find bottlenecks)
3. If the read mode of the queries is unfavourable (RSRREPDIR, RSDDSTAT, Customizing default)
7. What can I do if the client proportion is high for all queries?
Check whether most of your clients are connected via a WAN connection and the amount of data which is transferred is rather high.
8. Where can I get specific runtime information for one query?
1. Again you can use ST03N -> BW System Load
2. Depending on the time frame you select, you get historical data or current data.
3. To get to a specific query you need to drill down using the InfoCube name
4. Use Aggregation Query to get more runtime information about a single query. Use tab All data to get to the details. (DB, OLAP, and Frontend time, plus Select/ Transferred records, plus number of cells and formats)
9. What kind of query performance problems can I recognize using ST03N
values for a specific query?
(Use Details to get the runtime segments)
1. High Database Runtime
2. High OLAP Runtime
3. High Frontend Runtime
10. What can I do if a query has a high database runtime?
1. Check if an aggregate is suitable (use All data to get values "selected records to transferred records", a high number here would be an indicator for query performance improvement using an aggregate)
2. o Check if database statistics are update to data for the Cube/Aggregate, use TX RSRV output (use database check for statistics and indexes)
3. Check if the read mode of the query is unfavourable - Recommended (H)
11. What can I do if a query has a high OLAP runtime?
1. Check if a high number of Cells transferred to the OLAP (use "All data" to get value "No. of Cells")
2. Use RSRT technical Information to check if any extra OLAP-processing is necessary (Stock Query, Exception Aggregation, Calc. before Aggregation, Virtual Char. Key Figures, Attributes in Calculated Key Figs, Time-dependent Currency Translation) together with a high number of records transferred.
3. Check if a user exit Usage is involved in the OLAP runtime?
4. Check if large hierarchies are used and the entry hierarchy level is as deep as possible. This limits the levels of the hierarchy that must be processed. Use SE16 on the inclusion tables and use the List of Value feature on the column successor and predecessor to see which entry level of the hierarchy is used.
5. Check if a proper index on the inclusion table exist
12. What can I do if a query has a high frontend runtime?
1. Check if a very high number of cells and formatting are transferred to the Frontend (use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
2. Check if frontend PC are within the recommendation (RAM, CPU MHz)
3. Check if the bandwidth for WAN connection is sufficient
and the some threads:
how can i increse query performance other than creating aggregates
How to improve query performance ?
Query performance - bench marking
may be helpful
Regards
C.S.Ramesh
[email protected]

How should I report forum performance issues?

The forums rely heavily on the caching features of browsers to improve the speed of page rendering. Performance of these forums should greatly improve after a few pages because more and more of the images, css and javascript is cached in the browser. As a consequence, when reporting forums performance issues the report should include some information on the state of the browser cache to determine whether the issue is a browser issue or a server issue. Such detailed information is generally not available from just watching the browser screen, but needs to come from specialized tools such as performance monitor plugins and recording proxies.
The preferred report method for performance issues is to use the speed reporting features build into or available as a plugin for a browser for both the page you want to report a problem with and several refence pages in the site. Detailed instructions are listed below separated out for different browsers. If possible, please use Firefox for submitting the report because it provides an export format that can be read back electronically.
Known performance issues
The performance issues with any screen with a Rich Text Editor, such as the Reply window and the compose Private Message window have been acknowleged and improvements are being implemented.
Mozilla Firefox (preferred)
Warning: it is currently not recommended to generate a speed report when logged in. The speed report has enough detail for somebody else to hijack your session and impersonate you on the forums. If you really must report while logged in, make sure you log out your browser after generating the speed report and wait at least 4 hours before posting.
Install the Firebug plugin
Install the NetExport 0.6 extension for Firebug
Enable all Firebug panels
Switch to the "Net" panel in Firebug
Click on this link
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Browse to the page where you are experiencing the performance problem.
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Browse to the page where you are experiencing the performance problem.
Export the data from the Firebug Net panel
When you report a performance problem please attach the 6 exports from the Firebug Net panel and an explanation of how you are experiencing the issues (for instance how much slower it is then normal) and include a description of your internet connection (dial-up, dsl, cable etc.) and the country from where you are connecting. If you have non-standard tweaks to your Firefox configuration (such as pipelining enabled) or are running any plugins please include that information in your report as well.
Google Chrome
Open the Developer Tools (Ctrl-Shift-J)
Navigate to the resources tab
Enable resource tracking.
Click on this link
Export the resource loading data.
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Navigate to the page where you experience the performance problem
Export the data
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Navigate to the page where you experience the performance problem
Export the data
Since Google Chrome does not have an export format for the Resource Tracking information best current practice is to take a screenshot and note the hover details for any resource with a tail that is longer then 25% of the total load time. When you report a performance problem please attach the screenshots and an explanation of how you are experiencing the issues (for instance how much slower it is then normal) and include a description of your internet connection (dial-up, dsl, cable etc.) and the country from where you are connecting.
Apple Safari
The Apple Safari Web Inspector has a Resources panel similar to the Resources panel in the Google Chrome developer tools.To get there, follow these steps:
Show the menu bar.
Go to preferences
Go to the Advanced Tab
Check “Show Develop menu in menu bar”.
From the Develop menu select “Show Web Inspector”.
Collecting the performance information and exporting works exactly the same as in Google Chrome. Please refer to the instructions for Google Chrome.
Microsoft Internet Explorer
IE does not have native features to analyze web traffic. No plugins have been found that produce the required information (please let us know if we missed any). For now, please reproduce the issue with Firefox, Chrome or Safari.
Please note that due to the reliance on Javascript for the interactive effects the performance of these forums will be much better on MS IE 8 then on previous versions of MS IE.

Hi
It works, check once again...
regards
Swami

How to Measure Function Module Performance?

Please can you tell me how I can measure the performance and trace the actions of a Function Module in R/3?
The function module in R/3 is run when a user calls a WebDynpro action from a WebDynpro screen within the SAP Portal.
I have tried running a trace on a user (ST05) but that only shows table actions (e.g. reads/fetch etc.). Also it does not appear in ST04 or ST03N. I would like to know how long the program actually takes to run.
Thanks.
Paul

Hi,
if I want to measure the runtime required to run some Abap, I use SE30. However i used it only for normal Dynpro application, not WebDynpro.
The detail level of the created trace can be configured. The aggregation level should be set to "Full" or "By call" at the beginning. Disabling aggregation leads to huge trace files.
You can select which statements should be traced. If you disable an option it's runtime is not lost but add to the traced action in the next level. If for example "Open SQL" is disabled, the time used by it is added into the net time of the method, function module of subroutine. Otherwise if "Open SQL" is enabled the net time of a function module does not include SQL time. SQL time is then listed separately.
Greetings

Help needed in getting real time system performance monitor

Hi,
I need a real time system performance monitor for my solaris.
i am able to graph system usage graph on a daily/weely basis using the ksar grapher.
In the same way i need to capture the system utilisation real time to be viewed on a webpage. Please let me know if there are any free tool/scripts capable of doing it.

Hi,
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Hope this helps.
Thanks,
JituK

How to parameterize SAP PO Performance Monitoring

Similar Messages

Maybe you are looking for