How to pass internal tables dynamically in the subroutine
Hi Folks,
I need to take 3 input files from presentation server. instead of writing the gui_upload for 3 times i want to have it in a subroutine. but i need to specify the tables structure in the subroutine which is not possible to specify in the form ...endform since 3 itabs are fully different.
is there a way i can handle this dynamically...!
Please send the code if u have the same kind of stuff.
Thanks for ur valuable time.
Hi Hasmath,
Try this
data: begin of itab1 occurs 0,
field1(2),
end of itab1.
data: begin of itab2 occurs 0,
field1(10),
end of itab2.
data: filename type string.
start-of-selection.
perform file_upload tables itab1.
perform file_upload tables itab2.
*& Form file_upload
text
-->P_ITAB1 text
form file_upload tables p_itab1." type any
call function 'GUI_UPLOAD'
exporting
filename = filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = p_itab1
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " file_upload
REgards,
Ravi Kanth Talagana
Similar Messages
-
Passing internal tables dynamically to a subroutine
Hi All,
How to pass internal tables dynamically to a subroutine?
In subroutine logic i'm fetching data from MARA table for all entries in the internal table passed to the subroutine. Based on some condition the internal table varies. I'm placing the code below
Both GT_AUFM & GT_AUFM1 are of 2 different structures having MATNR.
IF WA_AUFM1-BWART EQ '261'.
PERFORM GET_IF_SEMIFINISHED USING GT_AUFM1.
ELSE IF WA_AUFM1-BWART EQ '262'.
PERFORM GET_IF_SEMIFINISHED TABLES GT_AUFM.
ENDIF.
FORM GET_IF_SEMIFINISHED USING P_TABLE TYPE ANY TABLE.
REFRESH GT_MARA.
SELECT MATNR FROM MARA INTO TABLE GT_MARA
FOR ALL ENTRIES IN P_TABLE
WHERE MATNR EQ P_TABLE-MATNR
AND MTART IN R_MTART.
ENDFORM.
With this logic i'm getting an error that the specified type has no structure and therefore no component called MATNR.
Thanks,
Anil.refer this link
dynamic internal table -
How to fill internal table dynamically
Hi All,
how to fill internal table dynamically.
for example:
begin of itab occurs 0,
empid like pa0000-pernr,
empname like pa0001-ename,
grade(5),
end of itab.
now i want to append dynamically field itab-grade along with rest fields.
is this possible?? if yes kindly let me know how to do that.
Regards,
Kiran IHi kiran,
To fill and create and internal table dynamically you can use this code.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
is_fieldcat-fieldname = 'FIELD1'.
is_fieldcat-ref_field = 'MATNR'.
is_fieldcat-ref_table = 'MARA'.
APPEND is_fieldcat TO it_fieldcat.
is_fieldcat-fieldname = 'FIELD2'.
is_fieldcat-ref_field = 'SPRPS'.
is_fieldcat-ref_table = 'PA0001'.
APPEND is_fieldcat TO it_fieldcat.
is_fieldcat-fieldname = 'FIELD3'.
is_fieldcat-ref_field = 'BEGDA'.
is_fieldcat-ref_table = 'PA0002'.
APPEND is_fieldcat TO it_fieldcat.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
Test it...
DO 40 times.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = '12345'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = 'X'.
ASSIGN COMPONENT 'FIELD3' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = '20030101'.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'field1' OF STRUCTURE <l_line> TO <l_field>.
WRITE / <l_line>.
ENDLOOP.
regards,
Aashish Garg -
How to pass internal table to method of class
Hi all,
I am new to abap objects, i want to pass one internal table to class.
i am trying in this way.
class c1 definition.
method get_material importing t_stpo type any table
exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
for all entries in t_stpo
where stlnr = t_stpo-stlnr.
endmethod.
endclass.
ERROR:
"stlnr" is not available
if i use this way. its not giing error.
class c1 definition.
method get_material exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
for all entries in it_stpo
where stlnr = it_stpo-stlnr.
endmethod.
endclass.
how to pass internal table with some specific reference may be using like or type <it_xxxx>
thanksTry this.
TYPES : BEGIN OF ty_stpo,
stlnr TYPE stpo-stlnr,
idnrk TYPE stpo-idnrk,
menge TYPE stpo-menge,
END OF ty_stpo,
BEGIN OF ty_mast,
matnr TYPE mast-matnr,
werks TYPE mast-werks,
stlnr TYPE mast-stlnr,
END OF ty_mast,
tt_stpo TYPE TABLE OF ty_stpo,
tt_mast TYPE TABLE OF ty_mast.
DATA : it_stpo TYPE tt_stpo,
it_mast TYPE tt_mast.
* CLASS c1 DEFINITION
CLASS c1 DEFINITION.
PUBLIC SECTION.
METHODS : get_bom_numbers EXPORTING ex_stpo type tt_stpo,
get_parent_material IMPORTING im_stpo TYPE tt_stpo
EXPORTING ex_mast TYPE tt_mast.
endclass.
* CLASS c1 IMPLEMENTATION
CLASS c1 IMPLEMENTATION.
METHOD get_bom_numbers.
ENDMETHOD. "get_bom_numbers
METHOD get_parent_material.
ENDMETHOD. "get_parent_material
START-OF-SELECTION.
DATA : obj TYPE REF TO c1.
CREATE OBJECT obj.
CALL METHOD obj->get_bom_numbers
IMPORTING
t_stpo = it_stpo.
CALL METHOD obj->get_parent_material
EXPORTING
im_stpo = it_stpo
IMPORTING
ex_mast = it_mast.
Regards,
Rich Heilman -
How to pass internal table values to parameter
hi,
how to pass internal table values to parameter in selection screen.if is it possible means please sent codeings.
thanks.
stalin.hi,
tables : mara.
data : begin of itab_mara occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
end of itab_mara.
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_matnr like mara-matnr.
selection-screen : end of block blk1.
select matnr ernam from mara into corresponding fields of itab_mara
where matnr = p_matnr.
loop at itab_mara.
write :/ itab_mara-matnr,
itab_mara-ernam.
endloop.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo -
How to create internal table dynamically based on a table entry
hi Experts,
I have table yprod_cat. It has product categories.
In my ABAP program I need to create internal table dynamically based on the number of entries in the table.
For example:
If the table has 3 entries for product category
1. Board
2. Micro
3. Syst
Then create three (3) internal tables.
i_board
i_micro
i_syst
How can we do this? Any sample code will be very usefull
Thanks & Regards
Gopal
Moderator Message: No sample codes can be given. Please search for them or work it!
Edited by: kishan P on Jan 19, 2011 4:22 PMOur APEX version is 4.2We are using below SQL query to display radio groups dynamically..
SELECT APEX_ITEM.RADIOGROUP (1,deptno,'20',dname) dt
FROM dept
ORDER BY 1;
Created a form using SQL type and given abouve SQL query as source.. But when we run the page, there were no radio groups displayed in the page..
Below is the output of the query..
<input type="radio" name="f01" value="10" />ACCOUNTING
<input type="radio" name="f01" value="20" checked="checked" />RESEARCH
<input type="radio" name="f01" value="30" />SALES
<input type="radio" name="f01" value="40" />OPERATIONS
>
If Tabular Form:
Edit Region > Report Attributes > Edit Column > Change the Column type to "Standard Report Column"
If normal Page Item:
Edit Page Item > Security > Escape special characters=No.
Pl read the help on that page item to understand the security risk associated with =NO.
Cheers,
Edited by: Prabodh on Dec 3, 2012 5:59 PM -
How to pass internal table to form routine..?
Gurus,
I am creating a custom Function module in which i have declared few perform statements and passing internal table to it..but when i declare the form it gives me error that the internal table is unknown...Can u please suggest me what am i doing wrong...
DATA: Begin of tb_set_values occurs 0.
include structure rgsb4.
DATA: End of tb_set_values.
PERFORM read_sets_with_values USING wa_setheader CHANGING tb_set_values[].
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
CHANGING rtb_set_values LIKE tb_set_values[].
DATA: v_setid TYPE setid.
*DATA: Begin of rtb_set_values occurs 0.
include structure rgsb4.
*DATA: End of rtb_set_values.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
EXPORTING
SHORTNAME = rwa_setheader-setname
IMPORTING
NEW_SETID = v_setid.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
EXPORTING
SETNR = v_setid
TABLES
SET_VALUES = rtb_set_values.
ENDFORM.
What can be the error..please helpWell actually, I just tested it and it works fine as you have written it in my test program, so not sure what you are doing wrong. This was tested in NW 7.0
REPORT rich_0001.
DATA: setheader TYPE string.
DATA: wa_setheader TYPE string.
DATA: BEGIN OF tb_set_values OCCURS 0.
INCLUDE STRUCTURE t000. "<<-- Test with T000 instead "rgsb4.
DATA: END OF tb_set_values.
SELECT * INTO TABLE tb_set_values FROM t000.
PERFORM read_sets_with_values USING wa_setheader
CHANGING tb_set_values[].
*& Form read_sets_with_values
* text
* -->VALUE(RWA_SETHEADER) text
* -->RTB_SET_VALUES text
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
CHANGING rtb_set_values LIKE tb_set_values[].
DATA: ls_set_values LIKE LINE OF rtb_set_values.
LOOP AT rtb_set_values INTO ls_set_values.
WRITE:/ ls_set_values.
ENDLOOP.
ENDFORM. "read_sets_with_values
Regards,
RIch Heilman -
How to pass internal table from FM to mai report
Hi,
I have created a new FM and under this all mine data is coming in one internal table IT_OUTPUT. now how to take this internl table to main report along with whole data.hi
As i understand, your are using this function module in your report, giving some parameters then u r getting complete data into one internal table if i am not wrong.
When u execute ur report this function module will give u the data through internal table. Just use that internal table to display the data using write statement if it is classical report. If it is ALV report use REUSE_ALV_LIST_DISPLAY or REUSE_ALV_GRID_DISPLAY to display the internal table data in screen
Thanks
Siva Kumar -
Passing internal tables as parameters to subroutines
Hi,
This was going to be a question but I just had it answered by someone. Hopefully, this piece of information is going to be useful to other people as well.
I had a subroutine in my code which looks like this.
form fr_sub_get_data USING uf_file
TABLES ct_int_log STRUCTURE zinterface_log.
endform.
I was told by someone at work to change it as follows: -
form fr_sub_get_data USING uf_file
CHANGING ct_int_log type ty_tab_int_log.
endform.
The reason is that when using the tables' clause to pass internal tables as parameters, a header line is automatically created in the subroutine which lasts for as long as the subroutine is being excecuted. Its considered to be a bad practise to use header lines (Work-Areas are preferable).
Another important point to remember is that the 'tables' clause can only be used to pass <b>standard</b> internal tables as parameters. It can not be used for internal tables of other types.
Cheers!HI
GOOD
GO THROUGH THIS LINK
http://www.abapforum.com/forum/viewtopic.php?t=1962&language=english
THANKS
MRUTYUN -
How to Pass internal table from a program to Samrt form
Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
PraveenHai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b. -
How to create internal table dynamically?
hi all
I have a particular internal table in memory area( thru EXPORT TO MEMORY ID ....)
how can i create an internal table of this type in another program at runtime ?
this internal table need not be a data dictionary type.
i.e., i need to create an internal table of type which
is stored in a particular memory-id.
Regards,
Naveen........
nullHi,
Check this code :
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> type any.
PARAMETERS: p_cols(5) TYPE c.
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
* Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
* Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
DATA it_fieldcatalog TYPE lvc_t_fcat.
DATA lr_table TYPE REF TO data.
FIELD-SYMBOLS <lt_table> TYPE table.
*-- Import the fieldcatalog
IMPORT it_fieldcatalog TO it_fieldcatalog
FROM MEMORY ID 'CREATE_DYNAMIC_TABLE'.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Create the dynamic table with the field catalog as structure
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcatalog
IMPORTING
ep_table = lr_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Convert the reference into a table
ASSIGN lr_table->* TO <lt_table>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Export the created table so that the function module can import it
EXPORT lt_table FROM <lt_table>
TO MEMORY ID 'CREATE_DYNAMIC_TABLE'.
Regards
L Appana -
How to pass internal table between views
Hello Experts,
How to pass an internal table between views? I have followed some steps but its showing an error.
i have created a table type of ZTTYPE_VBAP and line type VBAP.
I have declared in component controllers attribute LT_VBAP of associated type ZTTYPE_VBAP .
But when i am using this in my method in component controller its not taking.Venkata123# wrote:
Hello Experts,
>
> How to pass an internal table between views? I have followed some steps but its showing an error.
>
> i have created a table type of ZTTYPE_VBAP and line type VBAP.
> I have declared in component controllers attribute LT_VBAP of associated type ZTTYPE_VBAP .
> But when i am using this in my method in component controller its not taking.
you will have to declare a node with the attributes in the context tab of component controller. by doing this you will make this node a global one in your entire application . now copy the value you have in the internal table of yours in this node.
after doing so you can read this node anywhere in the program and you can retrieve the values.
regards,
sahai.s -
How to pass Internal table in submit
Hi Friends-
i have a internal table with two fields it is like
begin of error occurs 0,
num(8) type n,
msg(50) type c,
end of error .
now this table i have to submit in another report and i have to use this table in that other report
but how i can pass this in submit pls guide me.
Regards
MeetaHi ,
I am writing the 2 options that I know of my knowledge:
OPTION 1 :
in prog1
loop at itab.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = itab-matnr.
append r_matnr.
clear r_matnr.
endloop.
submit prog2 via selection-screen
with s_matnr in r_matnr and return.
in prog2
select-options: s_matnr for mara-matnr no-display.
loop at s_matnr.
itab-matnr = s_matnr-low.
append itab.
clear itab.
endloop.
OPTION 2:
report zashish_1.
data: imara type table of mara with header line.
start-of-selection.
select * into table imara from mara up to 10 rows.
export imara to memory id 'YOURID'.
submit zashish_2 and return.
The submitted program.
report zashish_2 .
data: imara type table of mara with header line.
import imara from memory id 'YOURID'.
loop at imara.
write:/ imara-matnr.
endloop.
Hope these option might have clarified most of your doubts.
Regards,
Ashish Arora -
How to pass internal table with data in ABAP OO
Hi experts ,
Here is the problem...
I create a screen 100 and use the internal table to get data from database, and then press the button on screen 100 , it will call screen 200.
I use ABAP OO code in screen 200, and i want to keep the internal table with data that i get from the sceen 100 parts, but it seems that it just supports to create a new internal table and get data from database in ABAP OO. That means i need to create a new table to save the data in internal table ? Or there is any other solution something like exporting or memory id ...
ps . the internal table in screen 100 is declared in global area, the beginning of the code.
Please give me some advice, thanks a lot!
Regards ,
ClaireI have already know how to do, here is my code:
METHODS fill_tree importing itab2 like itab1.
CALL METHOD: me->fill_tree exporting itab2 = itab1.
In METHOD fill_tree,
declare
data: itab3 TYPE STANDARD TABLE OF itab,
itab3[] = itab1[].
It is useful to me, thanks a lot. -
How to pass internal table data from model to BSP page.
Hi Experts,
I have requirement where I have got data from deep structure in Model.
The structure has two fields > 1. normal data tyoe + the other one is of table type.
Thanks and Regards,if you have defined the attribute then you can ABAP coding to use it in BSP.
for eg, here i am looping the intenal table and passing the data to list item box.
<%
LOOP AT lt_dyn_uom INTO wa_dyn_uom.
%>
<htmlb:listBoxItem key = "<%= wa_dyn_uom-name %>"
value = "<%= wa_dyn_uom-value %>" />
<%
ENDLOOP.
%>
Thanks,
Chandra
Maybe you are looking for
-
XML configuration file to link to frames in Flash - As2.0
How can I set the url or link attribute from the XML configuration file to link to frames in my movie instead opening a HTML page? I am using Actionscript 2.0 Thank you.
-
Bootcamp 3.0 and the 64-bit version of Windows 7 ?
Does Bootcamp 3.0 support the 64-bit version of Windows 7 ? Sorry for my bad English
-
Hi We ar trying to make a consumer protal where in a consumer after keying in his service number is given paytment details.As soon he presses the pay now URL is directed to bank. The payment deails are sent back to site. How certicfictaion and securi
-
ESS: Room Booking in MySAP ERP 2004
Hi All, I am creating Room Booking service. I dont find any standard link in ESS. Has anyone created Room Booking in MySAP ERP 2004. Is any workflow attached with this service. Can PP30 transaction serve the purpose.. I dont the correct functionality
-
What do i need to buy for Time Machine to work . i want to backup my mac
Hi i want to back up my macbook pro and im not sure how to do it. But i know you use time machine. What do i need to buy. Also somthing about airport utility