How to pass message to standard message container

Dear All,
I am working on Exit for process order confermation while saving (CORK). In that i am using poviding Errorr message when raw material is not consum as per BOM. So while checking raw material consumed from RESB table in loop i want to add error message step by step in one message box and want to show all error message via standard message container or any other way by showing popub message box having 3 or 4 message at a time... Please help me out with this...
Thanks,
Ashish.

Hello Ashish
If you have interface IF_RECA_MESSAGE_LIST available on your system then I can highly recommend to use this one as message handler.
For a sample report have a look at:
[Message Handling - Finding the Needle in the Haystack|http://wiki.sdn.sap.com/wiki/display/profile/2007/07/09/MessageHandling-FindingtheNeedleintheHaystack]
Regards
Uwe

Similar Messages

How to over wite the standard messages

Hi,
How can I over wite the standard messages ?
Cheers,
srak
Moderator message - Please ask a specific question - post locked
Edited by: Rob Burbank on Jun 24, 2009 1:41 PM

There is no know issue like this; have you installed any Preware apps? Have you tried restarting your device from Device Info, Reset Options, and Restart? I would try this first; but you may have to go the next step and Erase Apps & Data. This would delete all PIM data and apps off you device, and then you would have to reload from your backup data. This however will also delete all text messages on the device, and there is no way to restore them. The last step would be to run webOS doctor on the device to restore or repair the operating system. You can get this application from www.palm.com/rom, enter your serial number and follow the steps on this web page.

HT3529 how does iMessage differ from standard messages & how do I get it to work?

I have got an iPhone 4S as well as an iPad 1 & have them both linked with iCloud. I think I have set everything correctly for iMessage but don't understand when iMessage kicks in instead of standard SMS/MMS.
I was also under the impression that my SMS messages would be stored in iCloud so I could store them on my MacBook so I never lose them but that isn't working either.
Can anyone help?

http://support.apple.com/kb/HT3529 tells you what it is.
Refer to your user manual to setup iMessage here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How to pass soap request message to server?

how i can pass soap request message to server using http request header? the soap
message contains remote procedure call which invokes the method at serverside?
and where i have to write that header request?
so i dont know how to pass the request soap message document
[addsoaprequest.xml]

Hello,
We have a diagnostic tool called Post [1] that will post the request
directly to a SOAP server. You can also try the graphical tool WeX [2]
so you can see what is happening at the wire level.
I may have misunderstood your question and goal. The purpose of the
JAX-RPC [3] API is to provide a high-level abstraction of SOAP
communications such as you describe.
What is your use case?
Thanks,
Bruce
[1]
http://edocs.bea.com/wls/docs81/webserv/trouble.html#1066132
[2]
http://webservice.bea.com/wex.zip
[3]
http://java.sun.com/xml/jaxrpc/index.html
Nisha Kothari wrote:
>
how i can pass soap request message to server using http request header? the soap
message contains remote procedure call which invokes the method at serverside?
and where i have to write that header request?
so i dont know how to pass the request soap message document
Name: addsoaprequest.xml
addsoaprequest.xml Type: ACT Project (text/xml)
Encoding: base64

Reproducing oracle standard messages

Hi Forms gurus,
when I try to save a new record or update an existing record in a form in various blocks, the tables in the database get populated or updated accordingly.
But I don't get the standard message in the message bar at the bottom of the form saying Transaction Completed.. or No changes to Save etc.
How do I reproduce the standard messages? Please help.
TIA,

hi
if u do not have on-message trigger at form level
u can create on-message trigger and it will display message on taskbar.
message('--------------');Note:-if u have On-message trigger please disable it.
run your form and insert values.
sarah

How to pass varchar in query in query

Hi,
I my prroject I am fetching value from various tables in ref cursor based on value entered from FE.
To make it simple
Let suppore from FE it passes group of id from as input paremeter in proc
ex v_id:=2,4,5,6
No in query
It has to be
select * from table_name where id in(v_id).
However since the v_id is varchar facing some issue in fetching and is value in number.So how can this issue be resolved.
Thanks,
Tanmoy

TanmoyMoulik wrote:
Hi,
I my prroject I am fetching value from various tables in ref cursor based on value entered from FE.
To make it simple
Let suppore from FE it passes group of id from as input paremeter in proc
ex v_id:=2,4,5,6
No in query
It has to be
select * from table_name where id in(v_id).
However since the v_id is varchar facing some issue in fetching and is value in number.So how can this issue be resolved.
Thanks,
TanmoyRead this FAQ link on how to pass "Varying in List"
{message:id=9360009}

When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM),this message said (Connect to iTunes to use push Notification),How I can to stop these message?

When i update to the latest version (7.0.3), there is a message appear to me when i open any application that contains notification such as (What'sApp or BBM) , this message said (Connect to iTunes to use push Notification) , How I can to stop these messages that appear to me constantly?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

How can I filter messages that do NOT contain a specific word in the subject?

I want to do the opposite of what filtering normally does. I want to filter out messages that do not contain a word or a string.
For example, I want to display emails that do not contain the word "meeting" in the subject.
Is this possible? If so, how can it be done?

It's not built in. The TotalQuickFilter extension allows NOT and lots of other filter features:
https://addons.mozilla.org/en-US/thunderbird/addon/totalquickfilter/

How to capture error message from standard function module

Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
Vijaya

Hello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

OK....I'm stumped. The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account. Is there any way anyone else has used your iPad and possibly connected it to their computer?

It Gives me no reason this message often the first to enter my pass:" When you can not buy Equilibrium - Leonardo da Vinci's Balance Puzzle " and 27other elements. Please try again later". How can I remove this annoyng message? Maybe it's a Virus?

It Gives me no reason this message often the first to enter my pass:" When you can not buy Equilibrium - Leonardo da Vinci's Balance Puzzle " and 27other elements. Please try again later". How can I remove this annoyng message? Maybe it's a Virus?

The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

How to get message which don't contain specified header?

Hello
I have a question:
how to get messages which don't contain specified header?
At this moment I have something like this, but it works to long (2 seconds for 15 messages, 2 minutes for 800 messages:/ )
StringTerm st = new StringTerm("Header name") {
    public boolean match(Message arg0) {
        try {
           return arg0.getHeader(pattern) == null;
        } catch (MessagingException ex) {
           return false;
Message[] m = f.search(st);where f is folder
Does exist way easier and more "time-efficient"
regards
Edited by: moj_ekranik on Dec 4, 2009 1:28 AM
Edited by: moj_ekranik on Dec 4, 2009 1:29 AM

Assuming you're using IMAP...
Try this:
folder.search(new NotTerm(new HeaderTerm("header-name", "")));

How to pass values to messages dynamically

Hi,
    I am facing an issue while passing dynamic values to message text. The message number and message text are stored in an itab.
eg- lets say 001(which changes dynamically for every loop) has text 'Contract account &1 doesn't exist'. Now I need to pass the value of CA to it.the parameters and the message number will change with every loop.
Can anybody help me?

Hi,
You can use the FM :
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
EXPORTING
    msgid                     = Message ID
    msgnr                     = Message No.
    msgv1                     = 'Value '
MSGV2                     = ' '
MSGV3                     = ' '
MSGV4                     = ' '
IMPORTING
   MESSAGE_TEXT_OUTPUT       = Complete_Message.
Regards,
Deepa.

How to pass self-defined message to Monitor

Hi all,
i am asked to define several Exception situations and pass the message to monitor if any of the exception situation occurs. Can anyone give me a sample code?
This is what I wrote, but it didnt work... please help! Thanks!
Message Z***** (message ID)
          001 : *****. (message number and text)
          002 : *****
          003 : *****
          004 : *****
          005 : *****.

Hi Linda..
Use like this:
Either declare the Message id at the top of the report:
REPORT zxxxxx
MESSAGE-ID <msg id name>.
Else, you can use the message id in the message too..
MESSAGE <message type> <message no> (<message id>) WITH text.
Where, message type can be E, I, W or S.
For ex. MESSAGE E999(ZZ) WITH 'Incorrect entry'.
Thanks and Best Regards,
Vikas Bittera.

How to skip the Print Screen List pop-up message with standard T-code?

Dear Experts,
I want to do not see the Print Screen List pop-up message with standard T-code.
Ex, sm66, sm51
click on print button -> Print Screen List pop-up message(SAPGUI) -> print windows dialog (X)
click on print button -> print windows dialog (O)
Is it possible to disappear it?
Thanks,
Lee

Hello Mr.Lee,
If you are refering to the print icon on the toolbar (CTRL+P), then no, it is not possible.
This printer dialog is necessary for front-end printing so you can choose the active printer.
Regards,
Jude

How to pass message to standard message container

Similar Messages

Maybe you are looking for