How to pass query string parameters in list ?

Hi,
I have a "Links list" it contains the columns "Empname", "Description" and "Susped/resume" .Here Admin enters the records. When admin enter 'suspend' in "suspend/resume" column it will navigate to "suspend
page" similarly if enter 'resume' it will navigate to resume page.
So How I have to set the suspend/resume column by using query string parameter? (dont use hyperlink)
(We are completely developing my project by using out of box )
Appreciate if any one help.
Thank you.

Hi,
It will be easier for others to research on your requirement if you can provide more details about your requirement.
What is the reason of not using a hyperlink field type? As with hyperlink, we can navigate to other pages easily.
If you want to use other field type, we will need to write some code(JavaScript) to meet your requirement.
Best Regards
Dennis Guo
TechNet Community Support

Similar Messages

How to pass query string from content editor webpart to another?

Hi All,
I am using content editor web-part to show GooglePiechart for workflow status column in a list. When user click on chart, i need to show particular clicked area data in another list web-part. So that, i need to pass the query value from content editor
web-part to another web-part. How to achieve this scenario?

Hi Sam,
What you can do is using SPD create a data view webpart which excepts query string value as filters as shown in the below article
http://madanbhintade.wordpress.com/2012/01/08/sharepoint2010dataviewwebpart/
http://sharepoint.stackexchange.com/questions/55184/how-to-filter-dataview-webpart-dvwp-from-query-string
Then When you click on the pie charts particualr section perform a post back by appending the required query string paramter to the same page on which your webpart exist
Raghavendra Shanbhag | Blog: www.SharePointColumn.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

Passing query string parameters to Visual Web Parts?

Does anyone know how to get the parameters from a query string to a Visual Web Part?
Dan Marth

Hi,
you can read the query string parameter from the code behind using:
Request.QueryString["YourParam"];
You can also use Javascript or jQuery:
http://archive.plugins.jquery.com/project/query-object
http://javascript.about.com/library/blqs1.htm
HTH!
Regards, Sjoukje
Web: http://sjoukjezaal.com | LinkedIn:
http://www.linkedin.com/in/sjoukjezaal | Twitter:
@SjoukjeZaal
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

Using Query String Parameters with Session Scoped bean

I would like to pass query string parameters from a product page (user clicks on a specific product commandLink) that is request scope to a details page that is session scoped.
The problem is that the session scoped page only handles the first request. If you view the details of a product and then navigate back to the product page and choose another product ... the details page will not handle the new query string parameters and display the details for the first product chosen.
Is there a way to make the session scoped bean recognize the query string parameters past the first request?

I was able to replicate this problem with a very simple app that performs a redirection... just like the real app. Here's the simple app that I put together:
From request scope page:
<f:view>
         <h:form>
           <h:commandButton value="Link 1" action="#{reqbean.Link1}"/>
           <br/><br/>
          <h:commandButton value="Link 2" action="#{reqbean.Link2}"/>
        </h:form>
       </f:view>
From request scope bean:
public String Link1() throws IOException
    // Add event code here...
    //redirect the user
    FacesContext.getCurrentInstance().getExternalContext().redirect("untitled2.jspx?p=1");
    return null;
public String Link2() throws IOException
    // Add event code here...
    //redirect the user
    FacesContext.getCurrentInstance().getExternalContext().redirect("untitled2.jspx?p=2");
    return null;
}At this point... I put a println in the constructor of the session scoped bean because this is where I want to get the query string params. The constructor only gets called the first time a redirect is performed.

How to customize the SharePoint 2010 search query string parameters

Hi All,
I am trying to redirect default SharePoint search to a custom search results page.
I modified the Search Settings to redirect to the URL that I want.
But my custom search page takes different query string parameters to provide the results.
Eg: SharePoint search passes k=search term when we perform a search. But my custom page needs
test=search term
I would like to pass 'test' instead of 'k' as a query string. Is this possible?
Thanks
Carol

There is no way out of the box to change it. You could always write your own control that passes the value or inherit from SearchBoxEx web part (if you are using a search center) to pass a different value. Query String Filter web part won't
help you here I am afraid. However, wouldn't it be easier just to change your code to take the value that SharePoint passes you?
Corey Roth - SharePoint Server MVP blog:
www.dotnetmafia.com twitter: @coreyroth

UiXML and query string parameters

Is there a simple way to access a query string parameter within the destination page?
Example:
- in my source page I have something like:
<link text="My page destination"
destination="page?param1=value1" />
What I want is to be able to acces directly to the param1 within page.uix without handling events or writing any kind of java code.
I have tried to use ctrl:page, ctrl:eventResult or ctrl:servletRequest without success (thought it was not the right thing to do but gave it a try anyway).
As i understand (?) the doc query string parameters are event parameters:
- does it mean we can only deal with query string parameters in an event handler?
Oscar

Hi Oscar -
As i understand (?) the doc query string parameters are event parameters:
- does it mean we can only deal with query string parameters in an event handler? Right. The UIX Controller allows you to pass data to a new page using URL parameters in one of two ways: as event parameters - in which case you need to have a corresponding event handler - or as page properties. So, the built-in data providers that are supported by the UIX Controller (ctrl:page, ctrl:eventResult) are designed for supporting these two mechanisms.
If you do not want to write an event handler, then you could consider using page properties to pass your parameters. The following link shows how to use the pageURL bound value to construct a destination which includes a single page property:
<link text="Go to target page" xmlns="http://xmlns.oracle.com/uix/ui">
<boundAttribute name="destination">
<pageURL name="targetPage" xmlns="http://xmlns.oracle.com/uix/controller">
<properties>
<property key="prop1" value="value1"/>
</properties>
</pageURL>
</boundAttribute>
</link>
And the following sample shows how to bind to the same property:
<styledText data:text="prop1@ctrl:page"/>
Andy

Encrypt query string parameters

Hi All,
I have a SharePoint designer workflow email. I want to send encrypted link to users within email. Is there any way to send encrypted query string parameters?
Please guide me how to send parameters with url in email so that users cannot see it.
All suggestions are highly appreciated.
Regards and Thanks

Hi,
Per my knowledge, we can't Encrypt query string parameters in SharePoint Designer.
As a workaround, we can encrypt query string parameters using C# code and store the URL in a list. Then we can get the URL in SharePoint Designer.
http://www.codeproject.com/Articles/33350/Encrypting-Query-Strings
Best Regards
Dennis Guo
TechNet Community Support

How to send query string to OSB Business Service?

Hi
I need to call a Servlet which is accepting http get request.
My system design is
I have a web service interface that I need to expose to Front end application. I am using Proxy service for this.
Then I have a servlet at end system and using Business service to send request to servlet.
I need to pass username, password, jndi context and payload using url encoding.
What all steps do I need to follow for this? How to create query string , which variable I need to play with inbound or outbound?
I have gone through all the answers on this forum but could not understand much.
Thanks
Vibhor

Hii
I am still unable to send http get request to end service.
In flow I have setted $outbound/transport/request-http/query-string too.
But I have to send request with url encoding.
How to encode query string and how can I check whether my request is going correctly or not, is there any variable in which complete url would be stored.
Thanks
Vibhor
Edited by: Vibhor Rastogi on Sep 15, 2010 9:49 AM

Pass query string in Flex Builder debug?

Hi,
I'm trying to figure out how to launch a debug session while passing query strings in Flex Builder. If I open up the Debug dialog, and uncheck "Use Defaults" and attempt to add my query string to the Debug Path text field, Flex Builder states that "The file cannot be found to launch". How do I pass a query string to debug in a SWF with Flex Builder?
Thank you.

If I understood your question correctly.
go to html-template/index.template.html and add the query string there and everything you run the app the query string should be there.
Hope this helps,
BaBo,

[svn:osmf:] 13412: WebPlayer: optimizing JS code to forward all query string parameters to WebPlayer.swf .

Revision: 13412
Revision: 13412
Author:   [email protected]
Date:     2010-01-11 02:02:20 -0800 (Mon, 11 Jan 2010)
Log Message:
WebPlayer: optimizing JS code to forward all query string parameters to WebPlayer.swf.
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/html-template/index.template.html
    osmf/trunk/apps/samples/framework/WebPlayer/src/Configuration.as

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

How to pass XMLType as parameters to Java stored procs ?

How to pass XMLType as parameters to Java stored procs ?
ORA-00932: inconsistent datatypes: expected an IN argument at position 1 that is an instance of an Oracle type convertible to an instance of a user defined Java class got an Oracle type that could not be converted to a java class
Java stored proc -->
CREATE or replace FUNCTION testJavaStoredProcMerge( entity xmltype,event xmltype ) RETURN VARCHAR2 AS LANGUAGE JAVA
NAME 'XDBMergeOp.merge(org.w3c.dom.Document,org.w3c.dom.Document) return java.lang.String';
PL/SQL -->
declare
theQuote VARCHAR2(50);
entity xmltype;
event xmltype;
begin
entity := xmltype('<Quote><Fields><Field1>f1</Field1></Fields></Quote>');
event := xmltype('<Quote><Fields><Field2>f2</Field2></Fields></Quote>');
theQuote := testJavaStoredProcMerge(entity,event);
dbms_output.put_line(theQuote);
end;
Java class -->
public class XDBMergeOp {
public static String merge(Document entity, Document event) throws Exception {
return ...
Thanks in advance.

I think you'll need to use XMLType and then extract the DOM inside java..
create or replace package SAXLOADER
as
procedure LOAD(P_PARAMETERS XMLTYPE, P_DATASOURCE BFILE);
end;
create or replace package body SAXLOADER
as
procedure LOAD(P_PARAMETERS XMLTYPE, P_DATASOURCE BFILE)
AS
LANGUAGE JAVA
NAME 'com.oracle.st.xmldb.pm.saxLoader.SaxProcessor.saxLoader ( oracle.xdb.XMLType, oracle.sql.BFILE)';
end;
public static void saxLoader(XMLType parameterSettings, BFILE dataSource)
throws Exception {
    Document parameters = parameterSettings.getDocument();
    SaxProcessor app = new SaxProcessor(parameters);
    app.processXMLFile(dataSource);
Edited by: mdrake on Apr 6, 2009 11:28 AM

How to pass a String and make it as Color Object

I need to set a background color dynamically...but the value that i pass is in string format. How can i convert the string into Color format so that i can use the method setBackground(Color.blue) method. How to pass the string into the 'Color.blue' ?

Let param="red"
Class cls = Class.forName("java.awt.Color");
java.lang.reflect.Field fld = cls.getDeclaredField(param);
Color clr = (Color)fld.get(null);
You can use this 'clr' variable as you wish.
null

How to pass selection screen parameters in text elements?

how to pass selection screen parameters in text elements?

don't you mean he other way around. Assign text-elements (selection texts) to select options?
This you do in the menu where you can find text-elements, selection texts.
menu Goto->text elements->selection texts.
Edited by: Micky Oestreich on May 10, 2008 2:45 PM

Masking of query string parameters

Hello all,
I have a dot net application which has a query string parameters coming from a sharepoint site. I want to mask those incoming query string parameters.
Can anybody sugeest me whats the best method to mask paramters which are coming from another application, but not from any other aspx page.
Any help is greatly appreciated.
Thanks

Hello,
Seems that you've post your question in Sharepoint Forums, and some developers have given you suggestions or solutions. Please check the answers there and follow up if needed.
https://social.msdn.microsoft.com/Forums/office/en-US/d999d231-c517-4dbb-80e3-ede99eab09ed/encrypt-query-string-parameters?forum=sharepointdevelopment#d999d231-c517-4dbb-80e3-ede99eab09ed
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to pass context based parameters to subquery?

Hello to All!
How to pass context based parameters to subquery of custom folder when I schedule workbook?
Thanks, Oleg

Hi Russ
Yes, I've done this too. Basic SQL though will not allow the updating of a table inside a function, so we have to get clever. The trick is to use the PRAGMA AUTONOMOUS TRANSACTION command. Here's an example:
FUNCTION UPDATE_MYTABLE(P_VALUE IN NUMBER)
RETURN VARCHAR2 IS
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
UPDATE SCHEMA_OWNER.MY_TABLE SET MY_VALUE = P_VALUE;
COMMIT;
RETURN('Done');
END UPDATE_TABLE;
When the update has been completed the Discoverer worksheet will respond with 'Done'.
Everyone: don't forget to grant EXECUTE on this function to all of the necessary users, including the EUL owner, and also don't forget to import the function using the Admin edition so that it is available for the users. You will also need to make sure that all necessary users have been granted the UPDATE privilege on the table.
I hope this helps
Regards
Michael

How to pass query string parameters in list ?

Similar Messages

Maybe you are looking for