How to pass & update variable for each run in ODI

Hi,
I am new to the ODI. I am loading the data from src to trg table through interface. I want to maintain the '*create_run_cycle_id & update_run_cycle_id*' columns in the target table.
For ex: during first run create_run_cycle_id value should be some 1 and update_run_cycle_id should be null.
During second run create_run_cycle_id should be the same value as previous. But update_run_cycle_id value should be 2. This value should be keep on update with some value.
For this scenario, i am using the variable, but the variable is not keep on updating based on previous value. I am not aware of the variables in ODI.
Can anybody please help me?
Thanks,
Venkat

Try asking in the Data Integrator forum:
Data Integrator

Similar Messages

How to pass a variable for a SQL query in OLEDB source?

Hi All,
I am new to SSIS and working on it past few days. Can anyone please help me getting through a scenario where I need to pass a variable in the SQL statement in OLEDB source connection. Please find below for the details.
eg:
1) I have a SQL table with the columns SerialNumber, Name, IsValid, FileName with multiple rows.
2) I have the file Name in a variable called Variable1.
3) I want to read the data from my SQL table filtering based on the FileName (Variable1) within a data flow task and pull that data to the destination table.
Question: In the data flow task, added source and destination DB connection with a script component in between to perform my validations. When trying to retrieve the data from source using the variable (i.e. SQL Query with variable), I am not able to add
the query as the SQL statement box is disabled. How to filter the data based on the variable in the source DB ?
Any help/suggestions would be of great help.
Thanks,
Sri

Just to add with Vaibhav comment .
SQL Command : SQL query either with SQL variable or any condition or simple Sql statement
Like ;
Select * from dimcustomer
SQL Command using Varible :
Sometimes we design our dynamic query in variable and directly use that variable name in oledb source.
If you Sql query needs a condition based on SSIS variable .
you can find a Example here :
http://www.toadworld.com/platforms/sql-server/b/weblog/archive/2013/01/17/ssis-replace-dynamic-sql-with-variables.aspx
http://www.select-sql.com/mssql/how-to-use-a-variable-inside-sql-in-ssis-data-flow-tasks.html
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

I get but not the app. store in my doc. App. store is not installed, how do I do it for each other? I have my apple software update.

Hello,
I get but not the app. store in my dock.
App. store is not installed, how do I do it for each other?
I have my apple software update.
App.store app but after my update is not in the dock and system.
Kees.

Hi Kees ...
Your profile indicates you are running Leopard v10.5.8
You need to upgrade to Snow Leopard V10.6 in order to use the App Store. This is an "upgrade", not an "update".
Make sure your Mac meets Snow Leopard's requirements here.
You must have the minimum of v10.6.6 installed in order to access the App Store.
You can purchase Snow Leopard here > Mac OS X 10.6 Snow Leopard - Apple Store

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

How to pass session variable value with GO URL to override session value

Hi Gurus,
We have below requirement.Please help us at the earliest.
How to pass session variable value with GO URL to override session value. ( It is not working after making changes to authentication xml file session init block creation as explained by oracle (Bug No14372679 : which they claim it is fixed in 1.7 version Ref No :Bug 14372679 : REQUEST VARIABLE NOT OVERRIDING SESSION VARIABLE RUNNING THRU A GO URL )
Please provide step by step solution.No vague answers.
I followed below steps mentioned.
RPD:
****-> Created a session variable called STATUS
-> Create Session Init block called Init_Status with SQL
select 'ACTIVE' from dual;
-> Assigned the session variable STATUS to Init block Init_Status
authenticationschemas.xml:
Added
<RequestVariable source="url" type="informational"
nameInSource="RE_CODE" biVariableName="NQ_SESSION.STATUS"/>
Report
Edit column "Contract Status" and added session variable as
VALUEOF(NQ_SESSION.STATUS)
URL:
http://localhost:9704/analytics/saw.dll?PortalGo&Action=prompt&path=%2Fshared%2FQAV%2FTest_Report_By%20Contract%20Status&RE_CODE='EXPIRED'
Issue:
When I run the URL above with parameter EXPIRED, the report still shows for ACTIVE only. The URL is not making any difference with report.
Report is picking the default value from RPD session variable init query.
could you please let me know if I am missing something.

Hi,
Check those links might help you.
Integrating Oracle OBIEE Content using GO URL
How to set session variables using url variables | OBIEE Blog
OBIEE 10G - How to set a request/session variable using the Saw Url (Go/Dashboard) | GerardNico.com (BI, OBIEE, O…
Thanks,
Satya

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

JSP -- how to pass a variable

Hi,
I am relatively new to JSP/Java and am currently trying to figure out how to pass a value gotten from running a query into another query.
My code is below .. I am trying to pass 'tsid'. For simplicity I have hard-coded some values. I have tried 2 different methods (c:set & String) and bolded them below. I wanted to pass the tsid into the sql2 query.
<%@ page import="java.sql.*"%>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%
    Connection connection = null;
    try{
        String tpid="1";
        String tdate="2005-11-11";
        String tsr01="3";
        String tsr02="54";
        String tsr03="64";
        String tsr04="90";
        String tsr05="54";
        String tsr06="17";
        String tsr07="null";
        String tsr08="null";
        String tsr09="null";
        String tsr10="null";
        String tsr11="null";
        String tsr12="null";
        String tsr13="null";
        String tsr14="null";
        String tsr15="null";
        String tz_1l1="111";
        String tz_1u1="111";
        String tz_1l2="111";
        String tz_1u2="111";
        String tz_1l3="111";
        String tz_1u3="111";
        String tz_1l4="111";
        String tz_1u4="111";
        String tz_1l5="111";
        String tz_1u5="111";
        String tz_2l1="111";
        String tz_2u1="111";
        String tz_2l2="111";
        String tz_2u2="111";
        String tz_2l3="111";
        String tz_2u3="111";
        String tz_2l4="111";
        String tz_2u4="111";
        String tz_2l5="111";
        String tz_2u5="111";
        Class.forName("org.postgresql.Driver");
        connection = DriverManager.getConnection("jdbc:postgresql:dbName","postgres","dbPassword");
        Statement stmt1 = connection.createStatement();
        Statement stmt2 = connection.createStatement();
        Statement stmt3 = connection.createStatement();
        String sql1="INSERT INTO t_test_setup_results (tsr_tpid, tsr_tester, tsr_athlete, tsr01, tsr02, tsr03, tsr04, tsr05, tsr06, tsr07, tsr08, tsr09, tsr10, tsr11, tsr12, tsr13, tsr14, tsr15, tsr_date) VALUES ('"+tpid+"' , '15', '9', "+tsr01+", "+tsr02+", "+tsr03+", "+tsr04+", "+tsr05+", "+tsr06+", "+tsr07+", "+tsr08+", "+tsr09+", "+tsr10+", "+tsr11+", "+tsr12+", "+tsr13+", "+tsr14+", "+tsr15+", '"+tdate+"' );";
     stmt1.executeUpdate(sql1);
     ResultSet rs2 = stmt2.executeQuery("SELECT tsr_id FROM t_test_setup_results WHERE tsr_date='"+tdate+"' AND tsr_tpid='"+tpid+"' AND tsr_athlete='9';");
        %>
     <c:set param="tsid2" value="${rs2.rows[0].tsr_id}" />
     <%
        String tsid="$rs2.rows[0].tsr_id}";
        String sql2="INSERT INTO t_test_zones (tz_tsrid, tz_1l1, tz_1u1, tz_1l2, tz_1u2, tz_1l3, tz_1u3, tz_1l4, tz_1u4, tz_1l5, tz_1u5, tz_2l1, tz_2u1, tz_2l2, tz_2u2, tz_2l3, tz_2u3, tz_2l4, tz_2u4, tz_2l5, tz_2u5) VALUES ('"+tsid+"', "+tz_1l1+", "+tz_1u1+", "+tz_1l2+", "+tz_1u2+", "+tz_1l3+", "+tz_1u3+", "+tz_1l4+", "+tz_1u4+", "+tz_1l5+", "+tz_1u5+", "+tz_2l1+", "+tz_2u1+", "+tz_2l2+", "+tz_2u2+", "+tz_2l3+", "+tz_2u3+", "+tz_2l4+", "+tz_2u4+", "+tz_2l5+", "+tz_2u5+");" ;
        stmt2.executeUpdate(sql2);
%>
     <result>success</result>
<%
    catch (Exception e) {
        e.printStackTrace();
%>
     <result>failure</result>
<%
    } finally {
        try {
            connection.close();
        } catch (SQLException e) {
%>this is the error I get with the above:
org.apache.jasper.JasperException: /my-apps/Peak/Jsp/submitNewTestData.jsp(64,1) Attribute param invalid for tag set according to TLD
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:405)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:234)
org.apache.jasper.compiler.Validator$ValidateVisitor.checkXmlAttributes(Validator.java:989)
org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:710)
org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1441)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2213)
org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2219)
org.apache.jasper.compiler.Node$Root.accept(Node.java:456)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
org.apache.jasper.compiler.Validator.validate(Validator.java:1489)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:157)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

OK,
here is what I currently have:
%>
     <c:set var="tsid2" value="${rs2.rows[0].tsr_id}" />
     <%
        String tsid= tsid2;
        String sql2="INSERT INTO t_test_zones (tz_tsrid, tz_1l1, tz_1u1, tz_1l2, tz_1u2, tz_1l3, tz_1u3, tz_1l4, tz_1u4, tz_1l5, tz_1u5, tz_2l1, tz_2u1, tz_2l2, tz_2u2, tz_2l3, tz_2u3, tz_2l4, tz_2u4, tz_2l5, tz_2u5) VALUES ('"+tsid+"', "+tz_1l1+", "+tz_1u1+", "+tz_1l2+", "+tz_1u2+", "+tz_1l3+", "+tz_1u3+", "+tz_1l4+", "+tz_1u4+", "+tz_1l5+", "+tz_1u5+", "+tz_2l1+", "+tz_2u1+", "+tz_2l2+", "+tz_2u2+", "+tz_2l3+", "+tz_2u3+", "+tz_2l4+", "+tz_2u4+", "+tz_2l5+", "+tz_2u5+");" ;
     stmt2.executeUpdate(sql2);NOW I get sucess (which is what it should be) OR that tsid2 could not be resolved. Why the back and forth errors? is it a timing thing? (ie it sometimes takes longer to query the database?? )
If it is a timing thing, how can i fix this?

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

How to create a PR for each Maintenance Order

Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDD

Hi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran.

HT1338 how do i update java for my computer

how do i update java for my computer

Welcome to the Apple Support Communities
To install the most recent Java version for Mac OS X Snow Leopard, open  > Software Update. If it tells you that you are running the most recent version, you are using the most recent Java version for Snow Leopard

How to pass a variable more than one values?

How to pass a variable more than one values?

You can't.
During 1 session, 1 ODI variable can have only 1 value at a time.
If you need more than 1 value, you will have to do somethink like a loop inside your package, and refresh the variable value each time.

HT1338 How do I update Safari for OS X 10.6.8?

How do I update Safari for OS X 10.6.8?

What has Safari got to do with syncing iOS7? http://www.apple.com/iphone-5s/specs/ says:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 8; Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 11.1 or later (free download from www.itunes.com/download)
(iTunes 11 runs on Snow Leopard).
And https://maps.google.com runs fine on Snow Leopard.

How to allocate disk size for each user in iMac?

Hi folks,
I have iMac (Mac OS X, version 10.7.5) for Family, and each of my family member has account on it.
Now, kids download many large files (several GB size files) and HD is getting full.
So, I'd like to set maximum disk size for each user.
Could you prvide instruction how to configure disk size for each user?
Regards,
Hiro

I don't know of any way to do that by user.
I used to partition my HD and that sets a hard limit by partition, but by user? I don't think it can be done.

How to create Presentation variable for columns and to use it in Narrative?

Hi All,
Anybody know how to create presentation variable for a column (i.e., i need to create it in edit formula section itself). And then, I should use it in Narrative section to display that column value. Is it possible? Or do i need to use any other variable for this requirement? If so please let me know, how to create it? This is very urgent requirement.
Thanks in Advance
Thenmozhi

Hi Satya,
I just want to create a table that should horizontally display the values like below:
     SUID Tag # :123456               Year Mfg: 2007
     Description: computer corporation FA ID#: 4576
     Model Number: 4569 hESC: #ert
     Serial Number: 78945 Flags: c
Department: Hematology
User: thenmozhi
Database: OLAP
I think we can create this type of report using either Narrative or Static Text. But I am not sure whether it is possible or not? And also another thing is that sectioning is applied for SUID Tag # column. So, depending on the dashboard prompt if the SUID Tag # retrieves two or more values.
Then the first value for example 123456     and the values for the other columns related to this SUID Tag # value should display in the first page (i.e., page 1). And if the next value of the SUID Tag # for example say 678901 then the values should move to second page that is like this:
     SUID Tag # :678901               Year Mfg: 2008
     Description: Computer Manufacturing FA ID#: 4577
     Model Number: 4570 hESC: #eth
     Serial Number: 78946 Flags: G
Department: Hematology
User: Rehman
Database: OLAP
Thanks
Thenmozhi

How do I update Java for Adobe Flash CS3?

Hi,
When I ran Secunia Software Inspector today it told me that
the version of Java I have installed on my computer is out of date.
It tells me that it is finding 3 out-of-date files:
Once here:
C:\Program Files\Java\jre1.6.0_04\bin\java.exe
Twice here:
C:\Windows\System32\java.exe
and three times here:
C:\Program Files\Adobe\Adobe Flash CS3\JVM\bin\java.exe
I updated Java via the Sun website and consequently the first
and second warnings disappeared when I reran the Software
Inspector.
The software inspector however is still finding an
out-of-date Java version here:
C:\Program Files\Adobe\Adobe Flash CS3\JVM\bin\java.exe
Question is: How do I update Java for Adobe Flash CS3?
Is it adequate to copy the updated file "java.exe" from
"C:\Program Files\Java\jre1.6.0_04\bin\" to "C:\Program
Files\Adobe\Adobe Flash CS3\JVM\bin\" or do I need to do anything
else?
Any help will be much appreciated.

Hi
I have the same problem of you, and the same dont find a
solution. Me it's Kaspersky Anti Virus (AV) which find this
problem.
So (and I dont know if this solution is perfect), but I open
Flash CS3 with the Java update choiced and apparently Flash
fonctionnely well and Kaspersky dont find this
prob now. But I dont never use Java in Flash (or without that
I know that..), and same, I dont know at what Java is used in Flash
I think that "JRE v 1.6.0_04" and more recent Java version is
not good, because it's not quite the same Java application that in
Flash CS3, In Flash CS3 it's "J2RE" and
not "JRE".
The history of all Java versions (and this) is here (
http://java.sun.com/products/archive/)
(but in all this versions... seriousely it's a true shambles !)
If you want the last version for J2RE in this archives it's v
1.4.2.18 but the last version is J2RE 1.4.2.19 but dont again in
this archives
(search on Java site, maybe first page ? I dont remember
where I to find it...). But the problem... it's that this last
version (19) is always detected bad by my AV...
So I decide to use just the next version (v 1.5) and last
version in this series (in archives site) which is the "JDK/JRE -
5.0 v 5.0.16" but again named "Java 2 Platform
Standard Edition (J2SE) 5.0 Update 16" in this dowload next
archives page
http://java.sun.com/products/archive/j2se/5.0_16/index.html),
so well again named "Java 2" in this page (that which dont
the case for the equivalent same download page for Java 6...)
(Choice "JRE 5.0 Update 16" in this page)
For instal "JRE 5.0 Update 16":
1) Supp all files and folders in "JVM" (Java Virtual Machine)
folder in Flash CS3 (but dont supp this folder, empty now) and save
this contents in archive in you have
affraid.
2) dl "JRE 5.0 Update 16", directly in this page if you want:
(https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/View ProductDetail-Start?ProductRef=jre-1.5.0_16-oth-JPR@CDS-CDS_Dev
eloper)
3) In install, choice "personal instal" (or +/- the same
terms) and choice the "JVM" folder of you Flash CS3
and AV dont detect this version same a bad file

How to pass & update variable for each run in ODI

Similar Messages

Maybe you are looking for