How to pass values and see outout of PL/SQL Tables, SYS_REFCURSORs?

I am new to SQL Developer (Version 3.0.02).
Our QC division wants to test stored procedures using SQL Developer.
I tried to test procedures with PL/SQL tables and SYS_REFCURSORS as input and output parameters.
When we run it by pressing the green arrow we get the Run PL/SQL window.
How can we:
- Put values to SYS_REFCURSOR and PL/SQL table type input parameters?
- How can we display SYS_REFCURSOR and PL/SQL table type output parameters?
All this time we were using SQL*Navigator. In Navigator the PL Tables and SYS_REFCURSORs outputs are shown in a nice grid.
Here, in SQL Developer, do we have to WRITE our own code to input and display these types of parameters????

Hi Channa,
Yes in SQL Developer 3.0 you will have to write your own code to test out ref cursors.
I had created test harness scripts for all my procedures having ref cursors as parameters.
And I had to dbms_output all the values on the screen.
Probably a limitation of the SQL Developer 3.0 tool.
In case you come across different solution to this do let me know also.
Thanks,
Viju
blog: http://whizdba.wordpress.com

Similar Messages

How to pass values to select clause in PL/SQL procedure

Am relatively new to PL/SQL programming and ran into the following issue...
Table
EMP_MASTER
ID VARCHAR2(10);
FIRSTNAME VARCHAR2(20);
DATA FOR EMP_MASTER
'1','SCOTT'
'2','TIGER'
I ran the following SQL Query
SELECT COUNT(*) FROM EMP_MASTER WHERE FIRSTNAME IN ('SCOTT','TIGER');
This select Query is working fine and we get the count = 2 as
expected. Now I want a procedure for the same fn()
CREATE OR REPLACE PROCEDURE TEST_EMP_MASTER(NAMELIST IN VARCHAR2)
IS
CNT NUMBER := 0;
BEGIN
SELECT COUNT(*) INTO CNT FROM EMP_MASTER WHERE FIRSTNAME IN (NAMELIST);
DBMS_OUTPUT.PUT_LINE('Output-->NAMELIST:'||NAMELIST||':cnt:'||cnt);
END;
Now when I test the procedure by passing just one value its working
fine. But when I want to pass multiple values, it doesnt work!
set serveroutput on;
i.e exec TEST_EMP_MASTER('SCOTT'); Works and the output is
Output--->NAMELIST:SCOTT:cnt:1
but don't get the expected output for exec TEST_EMP_MASTER('SCOTT,TIGER');
I understand that the IN modifier in the WHERE clause expects the
values as 'Value1','value2'....I tried different combination by the
passing the values with quotes '''value1'',''value2'''.....but no
success

Select e.*
From EMP_MASTER e;
        ID     FIRSTNAME
1     1     SCOTT
2     2     TIGER
3     3     CAT
4     4     MOUSE
SQL> create or replace procedure count_emp_master (p_namelist VARCHAR2)
2 AS
3     v_namelist   VARCHAR2 (1000) := p_namelist;
4     v_name Varchar2(100);
5     v_count Number := 0;
6     p_count_emp Number := 0;
7 BEGIN
8     v_namelist := ',' || v_namelist || ',';
9
10     FOR cur IN 1 .. LENGTH (v_namelist) - LENGTH (REPLACE (v_namelist, ',', '')) - 1
11     LOOP
12        v_name := (SUBSTR (v_namelist,
13                          INSTR (v_namelist, ',', 1, cur) + 1,
14                          INSTR (v_namelist, ',', 1, cur + 1)
15                          - INSTR (v_namelist, ',', 1, cur) - 1
16                         ));
17     Select Count(1)
18     Into v_count
19     From emp_master
20     Where FIRSTNAME = v_name;
21
22     p_count_emp := p_count_emp + v_count;;
23
24     END LOOP;
25
26     dbms_output.put_line ('namelist --> '||p_namelist ||'p_count_emp -->'||p_count_emp);
27 END count_emp_master;
28 /
Procedure created
SQL> exec count_EMP_MASTER('SCOTT');
namelist --> SCOTTp_count_emp -->1
PL/SQL procedure successfully completed
SQL> exec count_EMP_MASTER('SCOTT,TIGER');
namelist --> SCOTT,TIGERp_count_emp -->2
PL/SQL procedure successfully completed
SQL> exec count_EMP_MASTER('SCOTT,TIGER,CAT');
namelist --> SCOTT,TIGER,CATp_count_emp -->3
PL/SQL procedure successfully completed
SQL> exec count_EMP_MASTER('SCOTT,TIGER,CAT,MOUSE');
namelist --> SCOTT,TIGER,CAT,MOUSEp_count_emp -->4
PL/SQL procedure successfully completed
SQL> Message was edited by:
Nicloei W

How to pass value to a control file in sql loader

Hello
please want to know if i can pass a value to a control file?
I have a table which i will populate using a control file but there is a field in the table which i will pass the date of the file.
how can i archive this
Thanks
Edited by: kama021 on Apr 18, 2012 3:49 AM

The content of the control file must be made dynamically to include desired value.
Handle:     kama021
Status Level:     Newbie
Registered:     Jun 9, 2009
Total Posts:     154
Total Questions:     42 (25 unresolved)
Why so many unanswered questions?
Edited by: sb92075 on Apr 18, 2012 6:34 AM

How can I populate and unordered list from an sql table

Instead of hardcoding a static menu using an unordered list, I would like to populate it from a table
(just two fields, MenuID,MenuDesc) so that the menu can grow or shrink depending on what is in the table.
Tried googling this but cannot make head or tail of php server side recursive scripts, datareaders etc
Couild some kind person just spell it out for me:
<ul>
 <li>Form.MenuDesc<li>
 <li>Form.MenuDesc<li>
 <li>Form.MenuDesc<li>
 etc
<ul>
many thanks

Hi Adam,
Many thanks indeed for taking the trouble to respond.
As you probably know, I'm a self taught amateur, so I need things spelled out.
Presumably, you mean something like
<CFQuery datasource"xxx" name="GetMenuData">
 select MenuDesc from Menus
</CFQuery>
<CFOutput>
 <ul id="MenuBar">
 <CFLoop query="GetMenuData">
 <li>#GetMenuData.Menudesc#</li>
 </CFLoop>
 </ul>
</CFOutput>
Seems a bit too simple...
(My replies from Outlook did not contain the actual code (bizarre)

How do we pass values and Internal tables to Sub-routines

how do we pass values and Internal tables to Sub-routines

Hi,
You can use the USING..or TABLES..or Changing addition..
Check this example.
DATA: T_MARA TYPE STANDARD TABLE OF MARA.
PERFORM DISPLAY USING T_MARA.
FORM DISPLAY USING LT_MARA LIKE T_MARA.
DATA: WA TYPE MARA.
LOOP AT LT_MARA INTO WA.
WRITE: / WA-MATNR.
ENDLOOP.
ENDFORM.
Thanks
Naren

How to pass value standard program to Workflow after than to call Transaction

Hi Experts..
 While We are Cancel any PO in Me29n, it will Pass values(Like reason for cancel With PO No) and Send a mail (User name whose reject the cancel against Release of PO No) in workflow inbox(workplace) After than getting a mail any particular User, they will See the Message of Purchase order against Canceled. After then they will double click on that message it will trigger ME29N Tcode with the particular PO.
 Using with Badi in Me29N we have to Passed Values and sent a Mail in work place but When Double click on Message I Dont Know HOw to Call ME29N in work place....
 Cancel Po in Me29N-->WORK PLACE --> Double click on message,will call ME29N
 So, please help me how to i can Rectified this.
Regards,
kumar

hi Kumar
BUS2012 is a business object, see it in tcode SWO1.
You can try blow code:
INCLUDE <CNTN01>.
DATA: OBJ TYPE SWC_OBJECT.
DATA: PO_ITEMS TYPE TABLE OF BAPIEKPOC.
DATA: PURCHASEORDER TYPE BAPIEKKO-PO_NUMBER VALUE '4500000004'.
SWC_CONTAINER CONTAINER.
SWC_CREATE_OBJECT OBJ 'BUS2012' ''.
SWC_CREATE_CONTAINER CONTAINER.
SWC_SET_ELEMENT CONTAINER 'NotificationType' 'S1'.
SWC_SET_ELEMENT CONTAINER 'PurchaseOrder' PURCHASEORDER.
SWC_CALL_METHOD OBJ 'Display' CONTAINER. " call method 'Display' show ME29N.
Infact, you can achieve all your requirment in workflow, don`t need implement BADI.
The trigger event is event 'rejection_start' in BUS2012. Create a user decision(which will show in workplace) and create a task bounding the 'Display' method of BUS2012.
There are so many detail content in scn or wiki. thanks.
hope can help you.
Regards,
Archer

How to pass values of the prompt through Action Link - URL in 11g

Hi All,
I am in OBIEE 11g v6.
Let's say, I have two dashbaord pages P1 and P2.
P1 page contains
1. Prompt PR1 - containing a single column EmpName
2. Report R1
P2 page contains
1. Prompt PR2 - containing a single column EmpName (same column as in PR1)
2. Report R2
Requirement :
Let's say a user select a value = David from the EmpName column in prompt PR1. In the Report R1, on one the measure columns 'Sales', I am using an action link - Navigate to URL ( I can't use Navigate to BI Content for some reasons). In the URL, I am giving the URL to page P2. Can I pass the selected value (which is David) to the EmpName column of the Prompt PR2 of Page P2 so that Report R2 is automatically limited by David when I land on that page through the URL?
Few things to consider are, I can't use EmpName column in my report R1 on page P1, I just want to pass the value of a common column from one prompt on Page1 to another prompt on Page2. Is that possible. Can anybody please help?
Thanks,
Ronny

Hmm can you give a try one more time with
Add EmpName name and hide it on report R1 on page P1
and set EmpName as Is Prompted on report R2 on page P2 and with my earlier steps should work.
Other option is read this doc once that helps you how to pass value thru url.
http://docs.oracle.com/cd/E21043_01/bi.1111/e16364/apiwebintegrate.htm#z1005224
You need to have a EmpName as Is Prompted on report R2 on page P2
If helps pls mark

How to pass values to Oracle store procedure in Crystal Report

Hi all,
I am newbie on passing values to stored procedure parameters. I created a Crystal Report using the Crystal Report wiward with PULL method and data come from Oracle stored procedure. In an ASP.NET page, I have stored two values in Session and need to pass them as input parameters to Oracle stored procedure to print the report. In Crystal reports 2010 once you connect to a stored-procedure as data source, it automatically creates the parameter fields with Crytal Report Viewer. Please show me how I pass values to store procedure at runtime automatically.
        'Set the parametter value
        myReport.SetParameterValue("@P_COURSE", "CoursetNo")
        myReport.SetParameterValue("@P_CLASS", "ClassNo")
    End Sub
I tried to apply above codes from Brian Bischof book but display the error from the following lines:
        myReport.SetParameterValue("@P_COURSE", "CoursetNo")
        myReport.SetParameterValue("@P_CLASS", "ClassNo")
I also enclosed my code. Any experts, please let me know anything wrongs on my code . I tried several methods that searching via google, but did not solve my issues. Thanks.
Edited by: avt2K7 on Mar 15, 2011 7:02 AM

Hi,
Thank you for your response. Here are the detailed code and error as following:
Please show what I am missing in my below VB.NET codes:
===========================================================================================
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        LogonToTables("username", "password", "servername", "")
    End Sub
    Private Sub LogonToTables(ByVal myUserId As String, ByVal myPassword As String, ByVal myServerName As String, ByVal myDataBaseName As String)
        Dim Course, Class As String
        Course = Session.Item("CourseNumber"))
        Class = Session.Item("ClassNumber"))
        Dim myReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        myReport.Load(Server.MapPath("CrystalReport1.rpt"))
        Dim myTableLogonInfo As CrystalDecisions.Shared.TableLogOnInfo
        'Set the database properties and security credentials
        Dim myConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
        myConnectionInfo.ServerName = "servername"
        myConnectionInfo.DatabaseName = ""
        myConnectionInfo.UserID = "username"
        myConnectionInfo.Password = "password"
        'Apply the ConnectionInfo to the report tables
        Dim myTables = myReport.Database.Tables
        For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
            myTableLogonInfo = myTable.LogOnInfo
            myTableLogonInfo.ConnectionInfo = myConnectionInfo
            myTable.ApplyLogOnInfo(myTableLogonInfo)
        Next
        'Set the parametter value to Crystal Report parameter named P_COURSE and P_CLASS
        myReport.SetParameterValue("@P_COURSE", "Course")
        myReport.SetParameterValue("@P_CLASS", "Class")
    End Sub
=================================================================================
I put a break point to debug but display the error at the following lines:
        myReport.SetParameterValue("@P_COURSE", "Course")
        myReport.SetParameterValue("@P_CLASS", "Class")
Eventhough, if I set a specific value to Course=1000 and Class = math and still receive the error:
Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
I tried several sources from Google search but it is not working. I really appreciate any detailed code either in C# or VB.NET to solve my issues. Thanks in advance.

How to pass values at runtime in JDBC - XI - File scenario

Hi friends,
In my scenario, data is coming from R/3 and i need to filter records from oracle database based on this data. There are 4 database tables that need to be queried using 2 select statements. The resultset after the execution of query will be mapped to the target flat file structure.
here are my queries:
1) Can I avoid BPM as data needs to be collected from the two database calls which involves two sender JDBC adapter instances with only one target structure?
2) Can I use stored procedure in this scenario? If yes, than how to pass values to stored procedure at runtime via sender JDBC adapter.
Thanks and regards,
Nitin aggarwal.

Hi Nitin,
"..So i want to know if i can write multiple select statements in the stored procedure.."
Read the below line that is mentioned in the SAP help documentation fro Sender JDBC adapter:-
Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
I dont think it can be achieved...but there must be some workaround for this. You can probably use a join statement.
Read this, again from the documentation:-
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
Regards,
Sushumna

How to pass value to select-option parameter using SET PARAMETER Command

Hi,
Am passing values to selection-screen fields in report RV13A004 ( used in VK11, VK12 and VK13). using below statement but material number is select-option in this report. am able to pass MATERIAL FROM using SET PARAMETER ID, can i know how to pass values MATERIAL TO range in select-options fields using SET PARAMETER Command ??
Passing values to parameter id
set parameter id 'VKS' field kschl.
set parameter id 'VKO' field vkorg.
set parameter id 'VTW' field vtweg.
set parameter id 'KDA' field erdat.
set parameter id 'MAT' field matnr_from.
Change condition price.
call transaction 'VK12' and skip first screen.
Thanks in advance.
Regards,
Balamurugan.

Hi,
instead of using set parameters and dden call transaction use this..........
submit RV13A004 WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.
Cheers
Will.

Default method - how to pass value to method container?

Hello,
I am dealing with a hyperlink in 'Objects and Attachements' section of the workitem.When i click on the link, the default method of the business object gets called automatically.
My question is: How to pass values to the default method (i.e. method container) as i don't invoke the method in my workflow explicitly? The method gets called when we click on the hyperlink.
Regards,
Monica.

Hello Monica,
a default method doesn't require parameters (and cannot make use of them), as they are designed to be called from various situation, such as the view from a workflow container, the display button within a workitem or the attachment list. So this is part of the system design.
To make an object dependent of workitem values I usually follow two different design patterns:
1) Using a flowitem/workitem instance with a special default method
- Create a subobject from type WORKITEM (if I'm going to use values from the current workflow instance) or subobject from type WORKINGWI (if I'm going to use values from the current dialog workitem).
- Do not make a general substitution for this new object type
- If using a ZWORKITEM, create an instance of this object type before the dialog step and then pass this object to the dialog workitem
- If using ZWORKINGWI, assign the object instance during the data flow to the step.
- In the properties of the object choose (any one) default method
- Within the coding you have the reference to the workitem/flowitem as object-key-... and you can further use functions/methods to read the workitem/flowitem container and do whatever has to be done
2) Retrieving values from the current workitem on-the-fly
Within the coding of the default method call the function module SWO_QUERY_REQUESTER that returns the instance/id of the current workitem-in-work (with is also set when using the hyperlink from a workitem). If the list is empty, there's no active workitem, otherwise use functions/methods to read the workitem container.
--> edit: Solution is not release safe, is it aint working with SAP R/3 Enterprise and higher
Best regards,
Florin
Message was edited by:
Florin Wach

How to passing value into Captivate from html?

How to passing value into Captivate from html?
Or
How to communicate between objects in one slides?

Hi czhao0378 and welcome to the forums!
Captivate does not natively allow you to communicate your own
data, either internally or externally. The only way to make this
happen is to create your own functionality, either via custom-built
Flash objects or JavaScript code executed in the browser or a
combination of both.
The only example I've seen of any "data passing" inside
Captivate is a custom text input/output solution that was posted on
the Captivate Developer Exchange:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1253 021
This solution consists of an input box that takes information
from the user on one slide and a second box that displays that
information on another slide. The functionality was built in Flash
and is embedded in Captivate as a Flash "animation". Unfortunately,
since this is a custom functionality, the information is not
included in the user completion results Captivate can pass to a
Learning Management System.
Since the solution mentioned above relies on a Flash
Actionscript variable to hold the information that is displayed,
you can also pass the information from HTML to Captivate using the
"SetVariable" command in JavaScript. This would at least allow you
to display your own HTML-based data inside Captivate.
Beyond that, I'm not aware of any other way to gather and
pass data in Captivate.

How to call & pass values to custom page from seeded page table region

Hi All,
can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
it is urgent. plssss
Regards,
purna

Hi,
Yes, we do this by extending controller, but you can also try this without extending controller.
1. Create Submit Button on TableRN using personalization.
2. Set "Destination URI" property to like below
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
Give your custom page path instead of EmpDetailsPG.
EmployeeId and EmployeeName are VO attributes(Table Region)
If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
In this case, only personalization will do our job. Hope it helps.
Thanks,
Venkat Y.

How to pass values between views in FPM - GAF

Hi Experts ,
i have a doubt in FPM how to pass values between views .
For Example: i am having 2 views - 1 ) overview , 2 ) edit using the GAF
in 1st view (overview ) i have a table displaying the employee details , i will select a single employee from that table for editing .
how to pass the selected employee details to the 2 nd view (edit ) .
Thanks & regards
chinnaiya P

Hi chinnaiya pandiyan,
Please follow below steps:
1. To achieve this u need to create two context nodes in the component controller.
2. Say one is EMPLOYEE_DATA and other is SELECTED_DATA.
3. Set the Cardinality of EMPLOYEE_DATA to 0..n and SELECTED_DATA to 1..1.
4. Add same attributes to both nodes. (probably all those fields that are required in table and/or in edit view.
5. Map both these nodes to OVERVIEW view.
6. Map only SELECTED_DATA node to EDIT view.
7. Create table in OVERVIEW view based on EMPLOYEE_DATA node.
8. Create edit form in EDIT view based on SELECTED_DATA node.
9. While navigating from OVERVIEW view to EDIT view, read the selected element of EMPLOYEE_DATA node and copy it to an element of SELECTED_DATA node. This should be written in PROCESS_EVENT method of component controller inherited from FPM component.
10. Now u got the selected data in SELECTED_DATA node which will be displayed in EDIT view.
Regards,
Vikrant

How to pass value between two forms.

Hi all,
how to pass value between two forms(using :parameter),...
Thanks
Rajesh

To use parameters, create a parameterlist with the named parameters
DECLARE
pl_id PARAMLIST;
pl_name VARCHAR2(10) := 'tempdata';
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF not Id_Null(pl_id) THEN
DESTROY_PARAMETER_LIST(pl_id);
END IF;
pl_id := Create_Parameter_List(pl_name);
ADD_PARAMETER (pl_id,'MYPARAMETER',TEXT_PARAMETER,:BLOCK.VALUE);
CALL_FORM('MYNEWFORM', NO_HIDE, DO_REPLACE, NO_QUERY_ONLY, pl_id);
END;In the new form you can then just access the parameters via :PARAMETER.MYPARAMETER;
An alternative is the usage of globals:
:GLOBAL.MYPARAM:=:BLOCK.VALUE;
-- call the emp-form
CALL_FORM('MYNEWFORM', NO_HIDE, DO_REPLACE);and in the new form use:
DEFAULT_VALUE(NULL, 'GLOBAL.MYPARAM');
IF :GLOBAL.MYPARAM IS NOT NULL THEN
...The advantage of gloabls is that they can also return values back to the calling form, which is not possible using parameters

How to pass values and see outout of PL/SQL Tables, SYS_REFCURSORs?

Similar Messages

Maybe you are looking for