How to pass version number of process using API's
Locator locator = new Locator("default","bpel");
IDeliveryService deliveryService = (IDeliveryService) locator.lookupService(IDeliveryService.SERVICE_NAME );
// Construct a normalized message and send to Oracle BPEL Process Manager
NormalizedMessage nm = new NormalizedMessage();
nm.addPart("payload", xml);
// Initiate the BPEL process
deliveryService.post("AsyncProc1", "initiate", nm);
When I run this code, I get the following error:
09/03/31 15:07:46.953 workflowform: Servlet error
ORABPEL-02178
Process not found.
The BPEL process "AsyncProc1", revision "" has not been loaded. Either the process was not initialized properly or the process has
been disabled.
Please consult your administrator regarding this error. The application server logs may provide more information regarding this error
I had created many versions of the same process. I need to use version 4.0 of this workflow. Is it possible to pass the version number while initiating the process?
Thanks.
Hi Badri,
I think you can identify the bpel with different versions as follows:
bpelprocessName_1.1 or bpelprocessName_v1.1
either one of these should be correct.
Thanks
Saikrishna
Similar Messages
-
How to pass version number from source location to records center?
When designing our record management approach, one of the requirements from business is to pass the version number from the source location to records center. They need to know which version has been declared as a record for the same document.
Is there a way to implement this (OOB)? Thank you.Hi,
Based on your description, my understanding is that when you sent a document to records center, you want to pass version number from source location to records center.
When a document is sent to the records Center, we keep its version number as assigned in its original document library as metadata that is submitted along with the document to the Records Center (in the “Properties” sub-folder of the document library in
the Records Center).
Automatically synchronizing that version number directly into the versioning system in the Records Center is something we should probably consider for a future version, but even in the current version we definitely don’t lose that information.
Hope this helps clarify.
Refer to the following article:
http://blogs.msdn.com/b/recman/archive/2006/08/24/715883.aspx
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to pass Cascading Parameter in SSRS using Java
How to pass Cascading Parameter in SSRS using Java---
We are having a problem with dependent parameters.There are three drop down--
1.first dropdown is of Country.When we select a country--Accordingly next dropdown(State)will populate
2.Second dropdown is of State. When we select a state--Accordingly next dropdown(City)will populate.
I have three data sources are
CountryList-
SELECT CountryRegionCode, Name
FROM Person.CountryRegion
ORDER BY Name
StateList
SELECT StateProvinceID, StateProvinceCode, CountryRegionCode
FROM Person.StateProvince
WHERE CountryRegionCode = @CountryRegionCode
ORDER BY StateProvinceCode
CityList
SELECT StateProvinceID, City
FROM Person.Address
GROUP BY StateProvinceID, City
HAVING (StateProvinceID = @StateProvinceID)
ORDER BY City
Ihave to show report that has been deployed on server on the besis of these parameters
I am using ReportViewer in JSP Page through url--
http://192.168.90.149/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project1%2fCascading_Parameters&rs:Command=Render&rs:parameter=true&Country="+Country+"&State="+State;
But it is not accepting parameter if they are cascaded.It is working fine if Both parameters are independent.
Edited by: kaushlee on May 11, 2010 9:22 PMTake a look at set_custom_property:
public static final ID SETTEXT = ID.registerProperty("SETTEXT");
public boolean setProperty(ID pid, Object value)
if (pid == SETTEXT)
String text = value.toString();
and in forms
set_custom_property('beans.bean_item', 1, 'SETTEXT', 'some text');
cheers -
How to Pass Click Value to DB using Java
How to Pass Click Value to DB using Java and display tat
clicked value row data in flex
i have created connection with Sql Server using java and drew
pie chart from values fetched from XML file created by Java
wat i need is when i click pie chart region (widget) i should
display a alert by giving value of particular widget name and Value
from Database and display in Flex AlertUse AddResource to add Javascript in your BackingBean Code and pass the value to your javascript code.
JSCookMenu and other dynamic adding of javascript to a JSF-JSP page is done using AddResource.... -
How to automate the data load process using data load file & task Scheduler
Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
ThanksTo follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt. -
How to Pass personal number(pernr) to the ESS Webdynpro ABAP Application
Hi,
How to pass personal number of employee to the standard ESS webdynpro ABAP application as application parameter of iview.
Thanks
SrikanthHi
For WebDynpro application in iView there is a property to set Parameter for WebDynpro application.
Handel these passed parameters in Default plug of Interface Controller.
Note string passed as parameter in iview is case sensitive.
Try this code to get URl of Deployed application
String appURL = null;
try {
WDDeployableObjectPart currentAppPart =wdThis
.wdGetAPI()
.getComponent()
.getApplication()
.getDeployableObjectPart();
appURL = WDURLGenerator.getApplicationURL(currentAppPart);
} catch (final WDURLException ex) {
wdComponentAPI.getMessageManager().reportException(
new WDNonFatalException(ex),
false);
Mandeep Virk -
How long does the number porting process take?
Hello Everybody! I just got my iphone (witch I LOVE it by the way) but I was wondering, how long does the number porting process take?
I ported my phone number over from SprintPCS last night at around 7pm EST and right now it's 8am EST and my Palm seems to still be working... Is this normal?
I'm still receiving incoming calls to my Palm, Text messages to my Palm, but yet I can do outgoing calls from my iphone... I'm kinda confused...
I mean I received the text on my iphone from sprint telling me: "Welcome to AT&T" as well as receiving the e-mail saying my new phone number is the same one I've had for 6 years now... Is 13 hours considered normal?
Thanx! :-DQueenYvette,
If it continues to be an issue tomorrow, I would recomend calling again, and getting in contact with AT&T's porting department. They are familiar with resolving any issues that may arise.
Powering off both phones is to make sure that the old phone is not maintaining an active connection with the old carrier that can interfere with the last steps of the porting process. If at all possible its a good idea to leave the old phone powered off, and restart the new phone about once an hour so that it will resync with the towers.
Hope this helps,
Nathan C. -
How to pass BindVariables to External Process (Workflow)
I build a shell script (unix) which accepts a command line parameter .... a "filename"
The "filename" is a dynamic name!
The workflow is build with a custom input parameter "filename" ... which I want to pass to an external process, which calls this shell script:
How can I do that ?
ExtProcess:
Command : Val=/bin/ksh
Parameter_List : Val=":/home/bin/myscript.sh:${Task.Input}:"
(Binding ":Filename" replaces the whole value, sorry)
Succes_Threshold: Val=0
Script : Val="" , Binding=":Filename"
... does not pass the value of ":Filename"
Script : Val="/tmp/fixed.name"
... works only with fixed names
what I really need is something simple like:
Parameter_list : Val=":/home/bin/myscript.sh:${Parameter.Filename}:FIXPARAM:"
or Script : Val=":${Parameter.Filename}:${Parameter.Param2}:${Parameter.Pram3}"
... similar problem I had with FTP, I found no way to pass dynamic filenames or other parameters (except LOCATION Parameters)
... similar problem I had with EMAIL I found no way to include PARAMETERS to the mail body (except to replace the whole body by 1 parameter)
Is there a solution or is in current version OWB 9.2 only "static" parameters supported.
I also was missing to pass OUTPUT-parameters for example of a TRANSFORMation,
I also was missing some urgent SYSTEM-parameters for self identification of the process(like "SYSTEM.TASK_NAME" "SYSTEM.EXECUTION_AUDIT_ID" "SYSTEM.ITEM_KEY" )
Thanks for all hints and best regards
MartinActually... After further investigation this may not be needed. I'd be interested in the answer, to understand what is possible.
The concept of passing parameters in the OWB workflow designer is rather limited, in my humble opinion. Sure, you can designate a "start" sequence that takes a parameter and you can pass that to mappings/transformations but there is no chance for feedback. Ie, if I manually (or through some rigged script) execute the flow with the "PARAMETER" then it will be able to bind. What about mid-flow. IE, select the record to be "processed", then call a "flow" with that as a parameter.
Am I mistaken? Is there a way to expose the "out" parameters of a mapping, or the return of a "transformation function" as "OUTS" in the process flow.
Of course, in a world where everything is OWB and in the DB one can leave data in tables, and pick it up on the other mappings. HOWEVER, most BI systems involve external retrievals, etc. that need a bit more "intelligence" then "run and return 1,2,3" . :)
Hope this is helpful for product feedback. If I'm mistaken on the WF capabilities please clue me in. :)
btw, I'm an OWB fan, certainly. The progress over the past two years has been excellent. -
How to pass table in RFC and use that table to populate fields in Mapping?
Hi,
I have a requirement FIle to CSV, the file consists of thousand lines...
What I did first is to put RFC look up per line. It is taking too long to process the message.
One work around that I could think of is to pass all the values to a table then pass the table to RFC then RFC returns another table, so only one RFC call is required.
How am I going to use the table returned by the RFC? Please advise how to achieve this scenario.Hi,
I use an ABAP RFC function, which has a parameter that contains many rows.
In ABAP, I create a two types. First is a ROW - contains some fields, for example, param1, param2, etc.
Second is a TABLE - contains multiple count of ROW.
Then I create a Remotecallable Function that has this TABLE-type as parameter (you can make this parameter as INPUT and OUTPUT). So in my mapping program after import RFC Function, I see a message looks like this:
MY_TABLE_PARAM (Occurences: 1)
item (Occureces: 0..unbounded)
param1 (Occureces: 1)
param2 (Occureces: 1)
etc (Occureces: 1)
Regards. -
How to pass serial number read from a PCB.
Hi,
I have a question:
How do I pass serial number read from a PCB so it will be embedded in Test Report file name for that test sequence. I am running Sequence in “New Execution" - Single Pass.
My test report file after I run test does not have serial number: “TEST_Rev6_Report[NO_UUT_SERIAL_NUM0][2 32 24 PM][4 26 2013].xml” but my Report Header has serial number present.
Thank you,
HenryThe attached screenshot shows how to set your report options, make sure you have the <TestSocket> and <UUTStatus> macros included in the Report File Path otherwise the serial will not be filled in the filename (Generate path is called a second time from the Single Pass -- Test Socket Entry Point sequence).
I used the ParallelModel.seq to test it.
The attached sequence file shows how to set the serial number.
Search for "Specifying Report File Paths by Expression" in the help for more macros.
Attachments:
Sequence File 2.seq 5 KB
Screenshot.png 57 KB -
Hi All,
Can you please let me know how to pass po_number(Purchase Order Number) while creating an assignment. i'm using hr_asignment_api to create assignments. Or do we have any other way to pass PO_NUMBER value to any API.
Thanks,
AnilHi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima -
How to pass variable number of parameters to a FORM.
Hi,
What is the correct syntax to pass variable number of parameters to a subroutine?
PERFORM TEST TABLES BRETURN USING TEST_NAME CHANGING MY_OUTPUT.
FORM TEST TABLES RETURN STRUCTURE BAPIRET2
ITAB STRUCTURE ITABLE_LINE OPTIONAL
USING VALUE(NAME) TYPE STRING
CHANGING VALUE(OUTPUT) TYPE STRING.
The above code does not work. How can we specify an optional parameter?
Thanks and Regards,
Sheetal
Message was edited by: Sheetal PisolkarHi,
I am trying to use a subroutine instead of function.A FUNCTION understands optional keyword.
How can this work for a FORM?
CALL FUNCTION 'TEST'
EXPORTING
MY_OUTPUT = 'output'
IMPORTING
TEST_NAME = 'mytest'.
FUNCTION TEST
* EXPORTING
* VALUE(OUTPUT) TYPE STRING
* IMPORTING
* VALUE(NAME) TYPE STRING
* TABLES
* RETURN STRUCTURE BAPIRET2 OPTIONAL
* ITAB STRUCTURE ITABLE_LINE OPTIONAL
ENDFUNCTION.
PERFORM TEST USING TEST_NAME CHANGING MY_OUTPUT.
FORM TEST TABLES RETURN STRUCTURE BAPIRET2 OPTIONAL
ITAB STRUCTURE ITABLE_LINE OPTIONAL
USING VALUE(NAME) TYPE STRING
CHANGING VALUE(OUTPUT) TYPE STRING.
ENDFORM.
Is this be possible?
Thanks
Sheetal. -
How to Pass Attachment from one process to other.
Hi,
Suppose there are two processes.I am starting 2nd process from 1st process through GP API.
How to pass the attachments?
Regards,
PratikHi,
I seems its GP related. Try out the link below hope u find the solution -
How to pass Idoc number to workfow
Hi all,
How to pass triggered Idoc number to the workfow ?
I wanna to display the Idoc number in mail, when error occur in posting, but workflow is trigarring but I am not able to get the Idoc number, even I given key element as idoc reference to the EDIDC-DOCNUM in the Business object ( z object).
Please let me know how to solve this...
Thanks yaar..
HPHi Hp,
Check the Workflow log or the event log?
Check the binding between event container to workflow container?
Thanks and Regards
Balaji E. -
How to access variable number of columns using ref cursor !
Hi,
I am trying to get variable number of columns using ref cursor.
Declare
mySzSql varchar2(2000);
Type dynSqlRC is Ref cursor;
current_cur dynSqlRC;
tbl_rec alt_42_consolidated%Rowtype;
Begin:
/* This works */
mySzSql := 'select *
from
Table1
Where
rowid = ''AAEWNEABXAAAAkxAAA''';
/* i want something like this to work, this is not working, giving missing variable name error */
mySzSql := 'select col1, col2, col3
from
Table1
Where
rowid = ''AAEWNEABXAAAAkxAAA''';
open current_cur for mySzSql;
fetch current_cur into tbl_rec;
close current_cur;
End;
I do have the list of desired columns which I am looking to fetch, so after taking that in the record type, how should i get their values. Is it possible to traverse tbl_rec declared above and if column name matches then I will store the value in the array and finally return this array.
Can somebody please tell me how to do this.
ThanksIt appears that this is a followup to How to loop through columns selected by select clause which is itself a followup to [url="
How to execute dynamic sql"]this earlier thread.
Assuming these are intended to be followup questions, can we please stick to a single thread? That makes it a lot easier to understand the situation and follow the conversation. Starting multiple threads makes it harder to follow the conversation.
Thanks,
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC
Maybe you are looking for
-
HT5312 Please I want to change your security questions
Please I want to change your security questions
-
How to input FI invoice with many line items using FB60
Dear All, Currently the users are posting document consisting of 500 to 700 line items every period using transaction FB60. The line items that are posted every period are not repetitive in nature. It is consuming lot of time. Is there any efficient
-
Connect database using ext javascript or applescipt in indesign
Hi, I need to connect oracle database using extended javascript or apple script in indesign. Can somebody help by giving any suggestion. Or is there any possibility to connect database using the two scripting methods. It is really urgent. Thanks Kar
-
30EA3 - Data filter entry problem
When I am browsing a table, on the data tab, and using a filter, sometimes the visible filter does not seem to be used. If I clear the filter text, and press the refresh button, the old filter is still used. If I enter a filter and press the refresh
-
I realize this question in some form or another has been posted ad nauseum, so I'll apologize in advance. I'm running a 500 GB Time Capsule. I recently got the bright idea to extend the network and bought a couple of new AirPort Express (11n models).