How to pass serial number read from a PCB.

Hi,
I have a question:
How do I pass serial number read from a PCB so it will be embedded in Test Report file name for that test sequence. I am running Sequence in “New Execution" - Single Pass.
My test report file after I run test does not have serial number: “TEST_Rev6_Report[NO_UUT_SERIAL_NUM0][2 32 24 PM][4 26 2013].xml” but my Report Header has serial number present.
Thank you,
Henry

The attached screenshot shows how to set your report options, make sure you have the <TestSocket> and <UUTStatus> macros included in the Report File Path otherwise the serial will not be filled in the filename (Generate path is called a second time from the Single Pass -- Test Socket Entry Point sequence).
I used the ParallelModel.seq to test it.
The attached sequence file shows how to set the serial number.
Search for "Specifying Report File Paths by Expression" in the help for more macros.
Attachments:
Sequence File 2.seq ‏5 KB
Screenshot.png ‏57 KB

Similar Messages

How do I stop Serial "VISA Read" from giving me packets instead of available bytes.

Dear Labvillians,
Highlight:
How do I stop serial "VISA read" from giving me packets instead of bytes?
Background:
I have a system that serially publishes 14 byte packets on a semi-regular interval.
At busy times, the producer of these these packets queues the data, effectively producing super-packets in multiples of 14 bytes sometimes as large as 8 packets (112 bytes).
My protocol handler has been designed to processes bytes, packets or super-packets.
My application now has multiple devices and the order of message processing is critical to correct functionality.
My observation is that the VISA read waits until the end of a packet/ super-packet before passing the data to the application code. (See Plot Below)
My expectation is that VISA read should give me available bytes, and not get too smart for itself and wait for a packet.
I have observed this on PXI, Embedded PC, cFP and most recently, cRIO
I have experimented with the cRIO's Scan interface rate, which helps with reducing the packet backlog but doesn't resolve to sub-packet byte read.
I understand that one solution is to Write FPGA code to handle it and pass the bytes through R/T-FIFO, and there are some great examples on this site.
Unfortunately this doesn't help with non FPGA devices.
I have also dabbled in event based serial reads but it is diabolical on vxWorks devices.
Any Help is appreciated
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT
Solved!
Go to Solution.

Sometimes Talking to yourself is helpful.
I hope this is a useful Nugget for someone in the future
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

How to output serial number from production order in GLM ?

how to pull serial number from production order in wwi template for GLM ?

Hi,
Please have a look to this thread:
BAPI/RFC to get serial numbers for a production order
Hope it helps,
Kr,
m.

How to pass serialized session/usertoken to BO webservice from xcelsius?

I wonder how to pass serialized session/usertoken to BO webservice from xcelsius. Could anyone help me how to pass the serialized session/user token to BO web service from Xcelsius?
Xcelsius is working fine when i use the username/password. But i would like to pass serialized session/usertoken from jsp file to Xcelsius as flash variable , then i will use this variable to get the data from webservice.
Is that possible to send serialized session/usertoken using soap header?
Thanks in advance...

Hi Micheal
Thank you for the reply. I have already created the CELogonToken Flash Variable and i am able get the logon token and map to the flash variable.
Now i would like to pass the same to biws as parameter. But the service has only 2 parameters as username and password.
Is there a way that i can create my custom parameters(CELogonToken/CESerializedSession) in BIWS service?

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can u

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?

Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush

How do I find the time capsule serial number remotely from my mac?

How do I find the time capsule serial number remotely from my mac?

Hi All,
I found it in my Support profile. https://supportprofile.apple.com.
Thanks.
Richie

How to cancel serial no. profile from material master ?

dear all SAP experts,
I have 1 mateial in which i assign serial no. profile in work scheduling view in material master. So how can cancel serial no. profile from material master ?
Suggest me
regards,
Nitin Nerkar

As long as no serial numbers exist for the material you are able to cancel or change the serial number profile.
As soon as serial numbers exist for the material and you want to change or delete the serial number profile, you must note the following:
The previously assigned serial numbers are no longer suited to the current serial number profile.
The indicator for the stock check may have changed. If this is the case, you can copy the profile settings in the serial number using the executable report program RISERNR9. However, you should only start this program once the changes have been updated in the material master record.
You can no longer delete the serial number profile in the material master record. Instead of this, you create a serial number profile without serialization procedures in Customizing and enter this in the material master record.

How to enter serial number before trial period is up.

I downloaded Photoshop Elements 11 and Premiere Elements 11 trial version and decided to purchase from Amazon. Can I use the serial numbers from the CDs to activate the trial version and not have to uninstall the trial and install from the CDs? How do I enter the serial numbers before the trial ends?

Never mind. You have to open the editor in photoshop and premiere elements to get the button to enter the serial number.

HT3396 how to buy serial number for iwork

how to buy serial number for iwork

I'm sure the problem is that you have the trial of iWork '09 installed. It's a "giitch" in the installer code that Apple has not fixed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

How to find serial Number for BCC Plugin?

Hi,
How to find serial number for Bcc plugin on FCP?
I need format my Mac so before that I to find the serial number?
Please anyone can help me....

The serial number has the format like E-111-aaa-222-bbb-333-ccc-444-ddd-5ee-ffff, it can be found on a piece of paper which has 3 stickers with it inside the box.

How to find serial number, how to find serial number

how to find serial number on Macbook air for registering Applecare?

Have you looked at the tiny numbers on the middle of the bottom of your MBA?

How to pass parameter /1BCDWB/DOCPARAMS from webdynpro?

Hi Experts,
We create a wdp view and indert an adobe form into it. And this form has an interface based on XML schema.
Now we want to translate this form into multi-language, and in wdp side, we will display diffenent language version of form for different regions.
I found that there is a paramater /1BCDWB/DOCPARAMS-LANGU, and it seems can control the language version in processing.
But I donot know how to pass parameter /1BCDWB/DOCPARAMS from wdp to adobe form.
Its my 1st to use adobe form and wdp, i really have no way out. Any advice will be Appreciated.
Thank you.
Richard

@sahai: Hey no , I am using very very simple example without any query or complex statement. I just have 2 radio buttons in VIEW1. On clicking the radio button, the naviagtion to view2 is done and the value of selected radio button is passed as a parameter in the plug.
In the view2 , i just have a caption in my layout where i am displaying the parameter value by setting the attribute.THe warning i get is in view2. Here is the code. Apart from this there is no coding in view2.
METHOD HANDLEPLUG_IN_V2 .
    DATA:
      NODE_CAPT_MSG                       TYPE REF TO IF_WD_CONTEXT_NODE,
      ELEM_CAPT_MSG                       TYPE REF TO IF_WD_CONTEXT_ELEMENT,
      STRU_CAPT_MSG                       TYPE IF_VIEW2=>ELEMENT_CAPT_MSG ,
      ITEM_MSG                            LIKE STRU_CAPT_MSG-MSG.
*   navigate from <CONTEXT> to <CAPT_MSG> via lead selection
    NODE_CAPT_MSG = WD_CONTEXT->GET_CHILD_NODE( NAME = `CAPT_MSG` ).
*   get single attribute
    NODE_CAPT_MSG->SET_ATTRIBUTE(
      EXPORTING
        NAME = `MSG`
        VALUE = PAR_1 ).
ENDMETHOD.

How to passing value into Captivate from html?

How to passing value into Captivate from html?
Or
How to communicate between objects in one slides?

Hi czhao0378 and welcome to the forums!
Captivate does not natively allow you to communicate your own
data, either internally or externally. The only way to make this
happen is to create your own functionality, either via custom-built
Flash objects or JavaScript code executed in the browser or a
combination of both.
The only example I've seen of any "data passing" inside
Captivate is a custom text input/output solution that was posted on
the Captivate Developer Exchange:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1253 021
This solution consists of an input box that takes information
from the user on one slide and a second box that displays that
information on another slide. The functionality was built in Flash
and is embedded in Captivate as a Flash "animation". Unfortunately,
since this is a custom functionality, the information is not
included in the user completion results Captivate can pass to a
Learning Management System.
Since the solution mentioned above relies on a Flash
Actionscript variable to hold the information that is displayed,
you can also pass the information from HTML to Captivate using the
"SetVariable" command in JavaScript. This would at least allow you
to display your own HTML-based data inside Captivate.
Beyond that, I'm not aware of any other way to gather and
pass data in Captivate.

How will my serial number work?

Please, how will my serial number work?

Did you register it with Apple? If not, you would have had to write it down. Once the device goes out of wifi or if the thief turns wifi off...its gone. All they have to do is restore it as new, you wont be able to detect it again. Sounds bleak I know but its hard to get it back once its gone...no matter what Apple says.
I really hope it turns up...I hate thiefs. Best of luck.

How to find serial number on Power Adapeter 12Watt

how to find serial number on Power Adapeter 12Watt

You posted in the Older Hardware (prior to 1998) forum.
Is the the 12W adapter http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter ?
This power adapter is for the new iPad, but it can be used on other Apple iDevices.
 Cheers, Tom

How to pass serial number read from a PCB.

Similar Messages

Maybe you are looking for