How to perform a Mass update in Vendor master-- WHolding Tax TYPE

I need to update the With holding tax type to be added to a list of vendors.
Please suggest.
I tried doing it by MASS/ XK99 but that I think is only for updating TAX code under a specific Tax type.
I want to add new tax type in multiple vendors.
Please post your sugestions ASAP.
Regards,
Madhur

Hi Madhur,
You can try LSMW for the same.
Please refer the link on LSMW by RAVI SANKAR VENNA.
LSMW for Functional Consultants in simple step-by-step way
You can try FM FI_WT_VENDOR_UPDATE as well.
Hope this helps you.
Regards
Eugene

Similar Messages

  • Mass update of product master (lock material record)

    Hi! Does anyone know of any program that I can use to carry out mass update of product master in SRM? I am specifically looking at locking the materials. I originally intended to use LSMW and create a recording for it. However, the recording didn't work - when I clicked on the open button so that I can key in the product id, it returns back to the recording / LSMW transaction with the screen data. I did not even have a chance to proceed further.
    Any idea would be appreciated.
    Regards
    SF

    really . though you are ECS mode .
    material master must be there  right ?
    How your SRM PO will reflected ( indeed really creates in ECC i.e copy of srm PO).
    confusion here
    can you create a SC for local material and order a successful PO ?
    i know there is a product check in catalog web services - in SRM product master not necesary but your ECC must have material master right..
    Muthu

  • Update the Vendor master from Employee master - PRAA

    Hi
    I need to know the process of updating multiple vendors from multiple employee data .i.e.bank,address and pernr.
    I was using PRAA transaction but it was not updating ...i think i miss some entries..especially file path...
    what are the steps need to be taken care of ...what should be in the file in the file path?
    please let me know
    Thanks

    Thanks Rob
    I checked the documentation..and found my error...actually the PRAA is updating vendor with employee data only when the employee number(PERNR) is updated in Vendor master...so i updated the field PERNR in Accounting section of Vendor then i ran the transaction PRAA it worked...it created the session and i processed the session..
    My question is ..is the PERNR is mandatory in Vendor master record?
                              and How iam going to update the multiple vendor records with multilple Employee records? since the vendor for Reference is the single filed?
    Please let me know
    Thanks
    Govi

  • Mass updating of material master

    Hi,
    can any one plz tell me the process of mass updation of material master charecteristics such as classification name, classification type,charecteristics name, charecteristics value for the given materials.
    give me some brief overview so that i can proceed on that.
    I have to use either BAPI or IDOC only.
    Thanks & Regards
    Nageswar

    Hi Eswar,
    Please check with BAPI_OBJCL_CREATE_KEY. There are no of threads available on same topic. lease check for the available information in SCN.I will suggest you post this in Data transfers forum.
    Same thread
    mass updating of material master
    which was blocked by moderator  Thomas and posted the same again
    Regards,
    Madhu.
    Edited by: madhurao123 on Nov 2, 2011 11:43 AM
    Edited by: madhurao123 on Nov 2, 2011 11:45 AM
    Edited by: madhurao123 on Nov 2, 2011 11:47 AM

  • New to ABAP -- Need help with any BAPI to update the vendor master record

    I have a requirement to update the vendor master record ( ie purchasing block data inlfa1 and lfm1 table )directly. i have created the report but my problem is i am updating tables directly by using modify which is not correct according to SAP hence i want to use bapi whereby i can change the fields of the table. does anyone know any bapi which can modify the lfa1-sprem field and lfm1-sperm field. Plz hep me. They have specifically asked me to do it using BAPI's.

    MAP2e_lfa1_to_bapivendor_04
    MAP2e_lfa1_to_bapivendor_05
    will be helpful

  • How to make the Region Fild in Vendor Master as a Mandatory?

    HI All,
    can anyonde guide me about:
    How to make the filed: "Region" in Vendor Master a Mandatory while entering the Data.
    PL.help.
    Thanks,
    Roopan.

    Hi
    Go to T-code OBD3.
    Check with account group you use for the vendor.
    Double click on the account group.
    Double click on the general data and on then on the address group. You can maintain region here as Mandatory.
    Reward if this helps
    Thanks

  • Vendor Master Record: Tax Number 1 Field

    Hi Everyone,
    For some reason, when you enter XK01 or XK02 for creation or change of vendor master record, Tax Number 1 within the Control Tab is visible and able to be input.  However, when displaying the vendor master record through XK03, the field is not visible.  Reviewing the field options for vendor master record did not reveal anything to me.  Any ideas why?
    Thanks,
    Pete

    Hi Peter,
    Please follow the path.
    SPRO>Financial Accounting  or Financial Accounting (New)>Accounts Receivable and Accounts Payable>Vendor Accounts>Master Data>Preparations for Creating Vendor Master Data>Define Screen Layout per Activity (Vendors)
    click on Display Vendor(Centrally) and Double click on Genral Data and Double click on Central
    check for Tax code field,its may be Suppressed
    If this helps you,please assign points.
    Thanks,
    Rau

  • Mass update of Vendor Bank Chain assignment details

    Hi Experts,
    I have a requirement to mass update Vendor Bank Chain  assignment details. I tried to use LSMW recording method for transaction FIBPU but it does not seems to be working if we have more than 2 bank keys for a vendor.
    Can you please let me know the best way of handling this requirement.
    Thanks in advance
    Regards
    VJ

    Hi Jeff,
    I need to mass update the bank chain details for vendors. I am trying to use LSMW bath recording for
    FIBPU transaction, but the problem is when the vendor has multiple bank keys there is no option to select  for each Vendor and bank key combination to record the bank chain assignment details. Just Wondering to see if we have any alternative way to mass update Vendor Bank chain details.
    Steps to replicate the scenario
    Step1: Execute transaction :FIBPU, then enter Vendor number and press F8
    Step2: You will now see Vendor bank entries (LFBK table ), in this screen I don't have the option to select each vendor and bank key combination to loop in batch recording method when it has multiple entries.
    Let me know if you need any more information.
    Thanks
    Regards
    VJ

  • How do i do mass maintenance on vendors.

    Lets say i have a number of vendors created under 1 company code and 1 pruchasing organization,how can i go about changing these vendors to a new company code and new purchasing organization?

    Hello, John.
    I see many problems with what you are trying to do. First and foremost: you cannot "change" vendors to a new company code and/or new purchasing org. Table LFB1 contains the Company Code data for vendors and LFM1 contains Purchasing Org data for vendors. The Company Code field (BUKRS) is part of the key to LFB1, and the Purchasing Org field is part of the key to LFM1.
    So, you can extend an existing Vendor to a new Company Code (in effect, adding a new record in table LFB1) or to a new Purchasing Org (in effect, adding a new record in table LFM1), but you cannot change an existing record in LFB1 to point to a new Company Code, or an existing record in LFM1 to point to a new Purchasing Org.
    If you want to extend existing Vendor Master Records to new Company Codes and/or new Purchasing Orgs, you might consider having a look at transaction MASS (Mass Maintenance of Master Records), I believe there is a Mass Maintenance Object for Vendors. Although, I don't recall whether this object will allow you to create new records.
    The second issue that I see has to do with the existing documents for your Vendor. Indeed, if, what you have in mind is to "re-assign" an existing Vendor to a new Company Code or Purchasing Org, the process is quite involved, if the Vendor has postings (Financial AP documents, or MM Purchase Orders, for example) already recorded against it. In that case, you would have to:
    - Flag the existing Vendor Master Company Code and/or Purchasing Org records for deletion. This will prevent new postings being made against that Vendor in that Company Code and/or Purchasing Org (or at least, users would receive warnings when trying to post against the "old" Company Code or Purchasing Org);
    - Define your Vendor in the new Company Code/Purchasing Org;
    - You may also need to transfer the AP Account balance from the old Company Code to the new one, as well as the open items for the Vendor (there you would need to be careful about the "double counting" effect, as your open items will already have been taken into account in the Account Balance). You also need to consider what to do with the open Purchasing Documents (Purchase Orders, Contracts, Purchase Reqs,...), define what other master records to recreate in the new Purchasing Org (Purchasing Info-records, Condition Records, Output records,...);
    - Finally, you need to take into consideration the archiving for your Vendor, so that the record for the old Company Code and/or Purchasing Org gets deleted from your system, ultimately.
    Even if your Vendor does not have any postings yet recorded in FI (Company Code) and MM (Purchasing Org), the only safe and standard way to get rid of the "unwanted" Company Code and Purchasing Orgs records for that vendor is through archiving (transaction SARA).
    In short, your requirement, as described in your question, simply cannot be achieved in SAP without seriously jeopardising the integrity of the existing postings (in FI and MM).

  • Mass change to vendor master records

    Hello,
    We have implemented classic extended scenario with SRM5 and will be outputting our Purchase Orders, i.e. email,fax,print from SRM as this is out leading PO.
    How do we mass change vendor master (BP) records in SRM as we have not set the output medium in the Business Partner (BP) records and would like to do so with a transaction simalar to the R/3 XK99 Vendor Mass Maintanance transaction. Is their an equivalent one avaiable for BP records?
    Thanks. Steve.

    Hi Steve,
    The send Medium is stored in table "BBPM_BUT_FRG0061" in SRM.
    You may try to add the send_medium to the vendor mass maintenance tcode. But, I am not sure whether this is a good practice. Pls try this first in a sandbox...
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Execute transaction "MASSOBJ", select BussObj BUS1006 & double click Application tables. Add the table "BBPM_BUT_FRG0061" for BUS1006.
    Then double click the field list for this table & add the SEND_MEDIUM  & any other key field over which you would want to maintain this field.
    Then execute tcode "MASS" for BUS1006 to mass change the send_medium field.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    I would always prefer the LSMW mode rather. Let me know how it goes.
    Cheers,
    Akash

  • How to find a filed SORTL in Vendor Master

    Hi Experts,
    In venoder master, where to find SORTL file?  HOw to update this field?
    I am able to see SORT1 AND SORT2 fields but not SORTL
    Thanks and regards
    Ram

    HI,
    If you want see SORTL field of all vendors then use report S_ALR_87012086.
    If you are not able so this field in vendor master itself then you must check two things...
    Field status of vendor group using transaction OBD3
    And transaction based layout using transaction using OB23
    Regards,
    Chintan Joshi

  • Mass update on Material Master

    Hi MM experts,
    How can I "mass update" a large number of material to avoid a lot of manual work?
    Specifically updating/changing  Commodity code / Import code number for foreign trade.
    thanks!
    Warm regards,
    Jump

    Hi,
    Please try using T code MM17 to carry out mass change to material master record.
    Regards
    ram

  • Restrict  bank details update in vendor master in PRAA Tcode

    Hi,
    In program RPRAPA00 and skip the function which populates the vendor master banking details from the HR Mini Master Subtype InfoType Bank Details 0009.No bank details should be written into the employee vendor master.
    My question is in which user exit i have to write my logic and how can i skip this functonality.
    Regards,
    Gurunath

    Hi all,
    under the badi BADI_EXITS_RPRAPA00 method SET_VALUES_FOR_BLFBK is updating the vendor banking detials updation from HR mini master.now how can i skip this implementation.
    anybody knows solution revert back.
    Regards,
    Gurunath

  • How to upload multiple telephone numbers in vendor master

    Hi to all,
    I have uploaded a vendor master through lsmw for 2 telephone numberes. But how can i load more than 2 telephone numbers.
    I have tried with 2 flat files but still it shows error.
    I have used batch input method.
    if anyone could give me a solution it would be very useful..
    thanks

    Hi max,
    Thanks for the reply...
    But i need to upload in lsmw,bcoz the client needs in lsmw..
    Do u have any object to add telephone numbers for already exsisting vendor..if so can u explain detaily.. b'coz i have worked on bapi.
    regards
    sri

  • Fb60 is not updating the vendor master HB and payment method

    Hi,
    For APP i have maintained the house bank and payment method in vendor master. When we do the FB60, system is not copying the house bank and payment method in FB60 document. Can any one guide me on this.
    govind

    Hi,
    Field status is optional only. And in FB60 screen i can able to view the house bank and payment method. My doubt is i have assigned the house bank and payment method in vendor master, hence while doing the fb60 system want to pickup and update the house bank and payment method in fb60 transaction. but it is not happening here. So in F110 we are not getting the document which was posted in fb60.
    govind

Maybe you are looking for